From: administrator tootai <admin@tootai.net>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Re: Connection issue with headset
Date: Thu, 03 Feb 2005 18:06:06 +0100 [thread overview]
Message-ID: <420259FE.2080204@tootai.net> (raw)
In-Reply-To: <ctqulk$ce4$1@sea.gmane.org>
Sebastian Roth a =E9crit :
> [...]
> If you followed this and it does not work I have two ideas.
> 1. Is it possible that your headset does not send any AT commands
> over the connected RFCOMM channel? As far as I know btsco will never
> try to establish an SCO connection without having recived the cmd
> from your headset.
> 2. The headset is sending "other" commands when pressing the headset
> button. Same effect as 1.
>
> Please have a look at hcidump -x to see if your headset is sending such
> a command when pressing the button!
Hi list,
continuing to check what is wrong I try this command sdptool browse=20
00:0b:2e:06:01:2e
Browsing 00:0B:2E:06:01:2E ...
Service Search failed: Protocol error
nomade:#
=20
and thats the hcidump -X result
HCIDump - HCI packet analyzer ver 1.12
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
0000: 2e 01 06 2e 0b 00 18 cc 02 00 00 00 00 .............
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 05 04 ....
> HCI Event: Link Key Request (0x17) plen 6
0000: 2e 01 06 2e 0b 00 ......
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
0000: 2e 01 06 2e 0b 00 98 0f 70 e7 ad ee 4b 1a 93 1c ........p...K...
0010: ba 18 77 0c 19 00 ..w...
> HCI Event: Command Complete (0x0e) plen 10
0000: 01 0b 04 00 2e 01 06 2e 0b 00 ..........
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 29 00 2e 01 06 2e 0b 00 01 00 .).........
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 29 00 05 )..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 48
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 24
L2CAP(d): cid 0x0040 len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x1002 (PubBrwsGrp)
max 0xffff
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 0x0029 flags 0x02 dlen 27
> ACL data: handle 0x0029 flags 0x01 dlen 24
L2CAP(d): cid 0x0040 len 47 [psm 1]
SDP SSA Rsp: tid 0xd3c0 len 0x2a
cnt 0x26
srv rec #0
aid 0x0000 (SrvRecHndl)
uint 0x10000
aid 0x22c2 (unknown)
ERROR: Unexpected syntax
0000: 12 b3 e4 12 fc c5 12 b4 15 12 fc c5 90 0e 12 12 =20
................
0010: b4 00 00 ...
srv rec #1
ERROR: Unexpected syntax
0000: b3 e4 12 fc c5 12 b4 15 12 fc c5 90 0e 12 12 b4 =20
................
0010: 00 00 ..
srv rec #2
ERROR: Unexpected syntax
0000: e4 12 fc c5 12 b4 15 12 fc c5 90 0e 12 12 b4 00 =20
................
0010: 00 .
srv rec #3
ERROR: Unexpected syntax
0000: 12 fc c5 12 b4 15 12 fc c5 90 0e 12 12 b4 00 00 =20
................
srv rec #4
ERROR: Unexpected syntax
0000: fc c5 12 b4 15 12 fc c5 90 0e 12 12 b4 00 00 =20
...............
srv rec #5
ERROR: Unexpected syntax
0000: c5 12 b4 15 12 fc c5 90 0e 12 12 b4 00 00 =20
..............
srv rec #6
ERROR: Unexpected syntax
0000: b4 15 12 fc c5 90 0e 12 12 b4 00 00 =20
............
srv rec #7
ERROR: Unexpected syntax
0000: 15 12 fc c5 90 0e 12 12 b4 00 00 =20
...........
srv rec #8
ERROR: Unexpected syntax
0000: fc c5 90 0e 12 12 b4 00 00 =20
.........
srv rec #9
ERROR: Unexpected syntax
0000: c5 90 0e 12 12 b4 00 00 .....=
...
srv rec #10
ERROR: Unexpected syntax
0000: 0e 12 12 b4 00 00 ......
srv rec #11
ERROR: Unexpected syntax
0000: b4 00 00 ...
srv rec #12
ERROR: Unexpected syntax
0000: 00 00 ..
srv rec #13
ERROR: Unexpected syntax
0000: 00 .
srv rec #14
ERROR: Unexpected syntax
cont
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 29 00 01 00 .)...
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
0000: 29 00 13 )..
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 06 04 ....
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 29 00 16 .)..
It give some informations to you gurus ;-)?
--=20
Daniel
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
prev parent reply other threads:[~2005-02-03 17:06 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-28 9:32 [Bluez-users] Connection issue with headset administrator tootai
2005-01-28 15:53 ` [Bluez-users] " Sebastian Roth
2005-01-29 16:39 ` daniel huhardeaux
2005-01-29 16:43 ` administrator tootai
2005-01-29 17:29 ` Stefan Bellon
2005-01-30 3:13 ` Brad Midgley
2005-01-30 19:01 ` administrator tootai
2005-01-31 14:57 ` administrator tootai
2005-01-31 14:58 ` Marcel Holtmann
2005-01-31 15:30 ` administrator tootai
2005-01-31 15:55 ` Marcel Holtmann
2005-01-31 18:20 ` administrator tootai
2005-02-01 16:37 ` Sebastian Roth
2005-02-02 13:20 ` administrator tootai
2005-02-02 16:21 ` Sebastian Roth
2005-02-02 16:55 ` administrator tootai
2005-02-03 14:13 ` Sebastian Roth
2005-02-03 21:39 ` administrator tootai
2005-02-04 7:38 ` Sebastian Roth
2005-02-04 12:25 ` administrator tootai
2005-02-03 17:06 ` administrator tootai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=420259FE.2080204@tootai.net \
--to=admin@tootai.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox