From: Marco Trudel <mtrudel@gmx.ch>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] error on connect
Date: Mon, 18 Apr 2005 20:13:51 +0200 [thread overview]
Message-ID: <4263F8DF.1040400@gmx.ch> (raw)
In-Reply-To: <426237CF.5060604@gmx.ch>
Hello Marcel
have you already had luck regarding this topic?
regards
Marco
Marco Trudel wrote:
> Marcel Holtmann wrote:
>
>> Hi Marco,
>>
>>
>>>>> Yes. Broadcom dongles cause the problem.
>>>>> Actually it's only the slave (listening dongle).
>>>>
>>>>
>>>> what kind of Broadcom dongle is this?
>>>
>>>
>>> I sent you pretty exactly one week ago the data from two broadcom 1.2
>>> dongles (ednet and acer). Inform me if you need the informations again.
>>> both dongles now make the problem...
>>
>>
>>
>> include them again, because my mailboxes are a little bit bigger ;)
>
>
> here we go:
> the file acer and ednet. my hcidump was from the acer.
>
>>>>> I tested all combinations with a minimal slave and master (only
>>>>> connects/accept connection and quit directly again).
>>>>> the master (connecting one) doesn't care, csr and broadcom worked
>>>>> fine.
>>>>>
>>>>> but the listening one gives the mentioned error (on more than 50%
>>>>> of the tries) I tried with a acer and ednet broadcom dongle.
>>>>> A csr works just perfectly fine...
>>>>>
>>>>> after the error, the dongle keeps waiting for a slave but won't
>>>>> access any more connections. so, basically the dongle is completly
>>>>> freezed.
>>>>
>>>>
>>>>
>>>> Send in the "hcidump -X -V" for it.
>>>
>>>
>>> I attached a successfull and a failed attemp from the listening acer
>>> dongle.
>>> Hope they are informative...
>>
>>
>>
>> These dumps gives no information about why you should receive a data
>> packet with an invalid connection handle. However maybe the change of
>> the packet types confuses the Broadcom dongle.
>
>
> change of packet type? i'm not doing anything like these intentionally.
>
>> With what programs do you tested these things? I must try to reproduce
>> it reliable.
>
>
> gallerie-connect.cpp and arm-listen.cpp
> please note these are quick and dirty pasts of a c++ project. another
> thing to mention is that you have to edit the macaddresses because I
> hardcoded them (the pc's have multiple dongles).
>
> thanks a lot!
>
>
> regards
> Marco
>
>
> ------------------------------------------------------------------------
>
> hci0: Type: USB
> BD Address: 00:02:72:C3:26:F5 ACL MTU: 377:10 SCO MTU: 16:0
> UP RUNNING PSCAN ISCAN
> RX bytes:390 acl:0 sco:0 events:17 errors:0
> TX bytes:311 acl:0 sco:0 commands:17 errors:0
> Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: MASTER
> Name: 'BlueZ (0)'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.2 (0x2) HCI Rev: 0xa LMP Ver: 1.2 (0x2) LMP Subver: 0x309
> Manufacturer: Broadcom Corporation (15)
>
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 46/900 us ( 5%), #Int= 2, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB OHCI Root Hub
> S: SerialNumber=c5056000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0a12 ProdID=0001 Rev=15.86
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0a5c ProdID=200a Rev= 0.01
> S: Manufacturer=Broadcom
> S: Product=CCBT2035BDGP23-1
> S: SerialNumber=000272C326F5
> C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
>
>
> ------------------------------------------------------------------------
>
> hci0: Type: USB
> BD Address: 00:02:72:C3:F2:10 ACL MTU: 377:10 SCO MTU: 16:0
> UP RUNNING PSCAN ISCAN
> RX bytes:526 acl:0 sco:0 events:42 errors:0
> TX bytes:323 acl:0 sco:0 commands:19 errors:0
> Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: ACCEPT MASTER
> Name: 'btLapi'
> Class: 0x100100
> Service Classes:
> Device Class: Computer, Uncategorized
> HCI Ver: 1.2 (0x2) HCI Rev: 0x14 LMP Ver: 1.2 (0x2) LMP Subver: 0x309
> Manufacturer: Broadcom Corporation (15)
>
>
> T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
> B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.8-24.14-default ehci_hcd
> S: Product=EHCI Host Controller
> S: SerialNumber=0000:00:1d.7
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
>
> T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.8-24.14-default uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:1d.2
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 23/900 us ( 3%), #Int= 1, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.8-24.14-default uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:1d.1
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0a5c ProdID=200a Rev= 0.01
> S: Manufacturer=Broadcom
> S: Product=CCBT2035BDGP23-2
> S: SerialNumber=000272C3F210
> C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
>
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.8-24.14-default uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:1d.0
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
>
> ------------------------------------------------------------------------
>
> // g++ -O2 -lbluetooth gallerie-connect.cpp -o gallerie-connect
>
> #include <sys/ioctl.h>
> #include <sys/socket.h>
> #include <sys/poll.h>
> #include <bluetooth/bluetooth.h>
> #include <bluetooth/rfcomm.h>
> #include <bluetooth/hci.h>
> #include <bluetooth/hci_lib.h>
> #include <unistd.h>
>
> #include <iostream>
>
> using namespace std;
>
>
> int main()
> {
> struct sockaddr_rc laddr, raddr;
> int sock;
>
> str2ba("00:02:72:C3:F2:10", &laddr.rc_bdaddr);
> laddr.rc_family = AF_BLUETOOTH;
> laddr.rc_channel = 1;
>
> str2ba("00:02:72:C3:26:F5", &raddr.rc_bdaddr);
> raddr.rc_family = AF_BLUETOOTH;
> raddr.rc_channel = 5;
>
> if((sock = socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM)) < 0)
> {
> cout << "Can't create RFCOMM socket" << endl;
> exit(1);
> }
>
> if(bind(sock, (struct sockaddr *)&laddr, sizeof(laddr)) < 0)
> {
> cout << "Can't bind RFCOMM socket" << endl;
> close(sock);
> exit(1);
> }
>
> if(connect(sock, (struct sockaddr *)&raddr, sizeof(raddr)) < 0)
> {
> cout << "Can't connect RFCOMM socket" << endl;
> close(sock);
> exit(1);
> }
>
> cout << "connected" << endl;
>
> close(sock);
> }
>
>
> ------------------------------------------------------------------------
>
> // arm-linux-g++ -O2 -lbluetooth arm-listen.cpp -o arm-listen
>
> #include <sys/ioctl.h>
> #include <sys/socket.h>
> #include <sys/poll.h>
> #include <bluetooth/bluetooth.h>
> #include <bluetooth/rfcomm.h>
> #include <bluetooth/hci.h>
> #include <bluetooth/hci_lib.h>
> #include <unistd.h>
>
> #include <iostream>
>
> using namespace std;
>
>
> int main()
> {
> int sock, client;
> socklen_t alen;
> struct sockaddr_rc addr;
>
> str2ba("00:02:72:C3:26:F5", &addr.rc_bdaddr);
> addr.rc_family = AF_BLUETOOTH;
> addr.rc_channel = 5;
> alen = sizeof(addr);
>
> if((sock = socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM)) < 0)
> {
> cout << "clientService: socket(...) failed" << endl;
> exit(1);
> }
>
> if(bind(sock, (struct sockaddr *)&addr, alen) < 0)
> {
> cout << "clientService: bind(...) failed" << endl;
> close(sock);
> exit(1);
> }
>
> if(listen(sock, 1) < 0)
> {
> cout << "clientService: listen(...) failed\n" << endl;
> exit(1);
> }
>
> client = accept(sock, (struct sockaddr *)&addr, &alen);
> cout << "connection here" << endl;
> close(client);
>
> close(sock);
>
> return 0;
> }
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-04-18 18:13 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-15 17:52 [Bluez-users] error on connect Marco Trudel
2005-04-15 23:20 ` Marcel Holtmann
2005-04-16 19:07 ` Marco Trudel
2005-04-16 20:09 ` Marcel Holtmann
2005-04-17 1:33 ` Marco Trudel
2005-04-17 1:46 ` Marcel Holtmann
2005-04-17 10:17 ` Marco Trudel
2005-04-18 18:13 ` Marco Trudel [this message]
2005-04-18 18:41 ` Marcel Holtmann
2005-04-19 14:48 ` Marco Trudel
2005-04-19 15:13 ` Marcel Holtmann
2005-04-19 15:24 ` Marco Trudel
2005-04-19 15:47 ` Marcel Holtmann
2005-04-19 16:00 ` Marco Trudel
2005-04-19 16:13 ` Marcel Holtmann
2005-04-19 16:32 ` Marco Trudel
2005-04-19 16:51 ` Marcel Holtmann
2005-04-19 22:11 ` Marco Trudel
2005-04-19 22:32 ` Marcel Holtmann
2005-04-20 12:17 ` Marco Trudel
2005-04-20 12:32 ` Marcel Holtmann
2005-04-20 12:44 ` Marco Trudel
2005-04-24 12:53 ` Marco Trudel
2005-04-24 14:48 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4263F8DF.1040400@gmx.ch \
--to=mtrudel@gmx.ch \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox