Re: [Bluez-users] error on connect

[Marco Trudel <mtrudel@gmx.ch>]

Hello Marcel

> I don't had the time to search my Broadcom dongles.
 > Maybe you should try to get yourself some CSR based dongles.

Unfortunately I'm bound to the broadcom dongles for multipe reasons, so I'd 
be very grateful if you could take a look at the problem.

I did some hcidump tests and I think I figured out the source of the 
problem. Please forgive me that this email contains some information I 
already postet, it's just to give a whole picture...
This is the start of a successfull connection (please note my added #N#):

 > HCI Event: Connect Request (0x04) plen 10
     bdaddr 00:02:72:C3:F2:10 class 0x3e0100 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
     bdaddr 00:02:72:C3:F2:10 role 0x01
     Role: Slave
 > HCI Event: Command Status (0x0f) plen 4
     Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
#1#
#1#
 > HCI Event: Connect Complete (0x03) plen 11
     status 0x00 handle 7 bdaddr 00:02:72:C3:F2:10 type ACL encrypt 0x00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
     handle 7 policy 0x0f
     Link policy: RSWITCH HOLD SNIFF PARK
 > HCI Event: Command Complete (0x0e) plen 6
     Write Link Policy Settings (0x02|0x000d) ncmd 1
     status 0x00 handle 7
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
     handle 7 ptype 0xcc18
     Packet type: DM1 DM3 DM5 DH1 DH3 DH5
#2# > ACL data: handle 7 flags 0x02 dlen 12
#2#     L2CAP(s): Connect req: psm 3 scid 0x0040


If a broadcom dongle is listening, sometimes the ACL packet marked with #2# 
is received where the #1# lines are. Actually, looking at the hcidump of 
the sending dongle, that's the time the packet is sent (alway, dongle 
independant).
It looks like this too early packet now causes the (sensefull) 
"hci_acldata_packet: hci1 ACL packet for unknown connection handle 6" 
kernel error message. The dongle then waits for this acl package and thinks 
this connection is in etablishing phase, so it is blocked.

The question now is, who is responsible for holding this packed back? The 
kernel? The dongle itself?

regards
Marco


-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI.
Version 11 adds new functionality designed to reduce time involved in
creating, integrating, and deploying reporting solutions. Free runtime info,
new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users