public inbox for linux-bluetooth@vger.kernel.org
 help / color / mirror / Atom feed
From: Eran <eran_l@over-here.org>
To: BlueZ users <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Still couldn't get AmbiCom BT2000E card to work...
Date: Sat, 26 Aug 2006 23:32:44 +0300	[thread overview]
Message-ID: <44F0AFEC.2060707@over-here.org> (raw)
In-Reply-To: <44F0AC32.5030405@libero.it>

Hi!


First, thanks for the advice.

Second, I've just tried it and got:

[root@hulud /etc/bluetooth]# hciattach /dev/ttyS1 bcsp -s 912600
BCSP initialization timed out

It doesn't matter if I try it with or without special speeds... it still 
wouldn't do.


Any ideas?


Massimo Piccioni wrote:

> Hi,
>
> you should use bcsp type, not ericsson.
> Try:
>
> setserial /dev/ttyS1 baud_base 912600
> hciattach /dev/ttyS1 bcsp -s 912600
> hciattach hci0 up
>
> (where /dev/ttyS1 is the serial dev reported by PCMCIA subsystem)
> It works fine with my Hamlet HCFBT2, that should be an Ambicom BT2000E 
> clone (same PCMCIA manfid ...).
>
> Ciao
> Massimo
>
>
>
> Eran wrote:
>   
>> Hello,
>>
>>
>> I know this is a problem that's have been on this list for more than 
>> once. However, since I gave it somre more time trying to make the card 
>> work without success, I would really appreciate it if someone could take 
>> a look into my description and let me know if he/she has any insights.
>>
>>
>> I have an AmbiCom BT2000E card. The identification:
>>
>>
>>   product info: "AmbiCom,Inc", "BT2000E", "Bluetooth PC/CF Card"
>>   manfid: 0x022d, 0x2000
>>
>>
>> Inside /etc/pcmcia/bluetooth.conf:
>>
>> card "AmbiCom BT2000E Bluetooth Card"
>>   version "AmbiCom,Inc", "BT2000E"
>>   manfid 0x022d, 0x2000
>>   bind "serial_cs"
>>
>>
>> So far, so good.
>>
>> hciattach /dev/ttyS1 ericsson
>>
>> would return with no errors, however hcid will be unable to take device 
>> up and return a timeout.
>>
>> The MAC address of the device would be all 00's.
>>
>>
>> I knew, from the past, that a kernel patch may help. I found it on this 
>> list and eventually applied it from:
>>
>> http://www.summet.com/x31/socket.html
>>
>>
>> Still, hcid timed out:
>>
>> Aug 25 19:55:58 hulud hcid[2954]: Sending read scan enable command 
>> failed: Connection timed out (110)
>> Aug 25 19:56:00 hulud hcid[2954]: Can't read address for hci0: 
>> Connection timed out (110)
>> Aug 25 19:56:07 hulud hcid[3108]: Can't init device hci0: Connection 
>> timed out (110)
>>
>>
>> Then I stumbled into this post to the list: 
>> http://sourceforge.net/mailarchive/message.php?msg_id=11189831
>>
>> So I tried setserial /dev/ttyS1 baud_base with various values, low as 
>> well as high, each time - trying hciattach -s <selected speed> 
>> /dev/ttyS1 ericsson.
>> Each and every time I had the same problem - hcid could not bring the 
>> interface up.
>> I've also tried appending a speed to hciattach, to no avail.
>>
>> I forgot to mention that I'm on a 2.6.17.11 kernel.
>> Has this card been reported to work for anyone on a 2.6 kernel?
>>
>> I will appreciate any help anyone can give.
>>
>> Thank you all in advance,
>> ERan
>>
>> -------------------------------------------------------------------------
>> Using Tomcat but need to do more? Need to support web services, security?
>> Get stuff done quickly with pre-integrated technology to make your job easier
>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>> _______________________________________________
>> Bluez-users mailing list
>> Bluez-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>
>>   
>>     
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>   

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

  reply	other threads:[~2006-08-26 20:32 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-08-25 16:53 [Bluez-users] Still couldn't get AmbiCom BT2000E card to work Eran
2006-08-26 20:16 ` Massimo Piccioni
2006-08-26 20:32   ` Eran [this message]
2006-08-26 20:49     ` Massimo Piccioni
2006-08-27 22:04       ` Eran

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=44F0AFEC.2060707@over-here.org \
    --to=eran_l@over-here.org \
    --cc=bluez-users@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox