From: Eran <eran_l@over-here.org>
To: BlueZ users <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Still couldn't get AmbiCom BT2000E card to work...
Date: Mon, 28 Aug 2006 01:04:42 +0300 [thread overview]
Message-ID: <44F216FA.3020502@over-here.org> (raw)
In-Reply-To: <44F0B3D2.2060102@libero.it>
Hi,
Yes, I did setserial as you wrote (also tried that to many different
speeds).
dmesg shows nothing, but then again - I'm on a 2.6.17.11 kernel compiled
by myself.
I've added some debug printouts in the serial driver. I will mail them
to you , if you are interested...
Massimo Piccioni wrote:
> Did you setserial /dev/ttyS1 baud_base 912600 ?
> Your dmesg?
>
> I'm using kernel 2.6.16.16.
>
>
>
> Eran wrote:
>
>> Hi!
>>
>>
>> First, thanks for the advice.
>>
>> Second, I've just tried it and got:
>>
>> [root@hulud /etc/bluetooth]# hciattach /dev/ttyS1 bcsp -s 912600
>> BCSP initialization timed out
>>
>> It doesn't matter if I try it with or without special speeds... it still
>> wouldn't do.
>>
>>
>> Any ideas?
>>
>>
>> Massimo Piccioni wrote:
>>
>>
>>
>>> Hi,
>>>
>>> you should use bcsp type, not ericsson.
>>> Try:
>>>
>>> setserial /dev/ttyS1 baud_base 912600
>>> hciattach /dev/ttyS1 bcsp -s 912600
>>> hciattach hci0 up
>>>
>>> (where /dev/ttyS1 is the serial dev reported by PCMCIA subsystem)
>>> It works fine with my Hamlet HCFBT2, that should be an Ambicom BT2000E
>>> clone (same PCMCIA manfid ...).
>>>
>>> Ciao
>>> Massimo
>>>
>>>
>>>
>>> Eran wrote:
>>>
>>>
>>>
>>>> Hello,
>>>>
>>>>
>>>> I know this is a problem that's have been on this list for more than
>>>> once. However, since I gave it somre more time trying to make the card
>>>> work without success, I would really appreciate it if someone could take
>>>> a look into my description and let me know if he/she has any insights.
>>>>
>>>>
>>>> I have an AmbiCom BT2000E card. The identification:
>>>>
>>>>
>>>> product info: "AmbiCom,Inc", "BT2000E", "Bluetooth PC/CF Card"
>>>> manfid: 0x022d, 0x2000
>>>>
>>>>
>>>> Inside /etc/pcmcia/bluetooth.conf:
>>>>
>>>> card "AmbiCom BT2000E Bluetooth Card"
>>>> version "AmbiCom,Inc", "BT2000E"
>>>> manfid 0x022d, 0x2000
>>>> bind "serial_cs"
>>>>
>>>>
>>>> So far, so good.
>>>>
>>>> hciattach /dev/ttyS1 ericsson
>>>>
>>>> would return with no errors, however hcid will be unable to take device
>>>> up and return a timeout.
>>>>
>>>> The MAC address of the device would be all 00's.
>>>>
>>>>
>>>> I knew, from the past, that a kernel patch may help. I found it on this
>>>> list and eventually applied it from:
>>>>
>>>> http://www.summet.com/x31/socket.html
>>>>
>>>>
>>>> Still, hcid timed out:
>>>>
>>>> Aug 25 19:55:58 hulud hcid[2954]: Sending read scan enable command
>>>> failed: Connection timed out (110)
>>>> Aug 25 19:56:00 hulud hcid[2954]: Can't read address for hci0:
>>>> Connection timed out (110)
>>>> Aug 25 19:56:07 hulud hcid[3108]: Can't init device hci0: Connection
>>>> timed out (110)
>>>>
>>>>
>>>> Then I stumbled into this post to the list:
>>>> http://sourceforge.net/mailarchive/message.php?msg_id=11189831
>>>>
>>>> So I tried setserial /dev/ttyS1 baud_base with various values, low as
>>>> well as high, each time - trying hciattach -s <selected speed>
>>>> /dev/ttyS1 ericsson.
>>>> Each and every time I had the same problem - hcid could not bring the
>>>> interface up.
>>>> I've also tried appending a speed to hciattach, to no avail.
>>>>
>>>> I forgot to mention that I'm on a 2.6.17.11 kernel.
>>>> Has this card been reported to work for anyone on a 2.6 kernel?
>>>>
>>>> I will appreciate any help anyone can give.
>>>>
>>>> Thank you all in advance,
>>>> ERan
>>>>
>>>> -------------------------------------------------------------------------
>>>> Using Tomcat but need to do more? Need to support web services, security?
>>>> Get stuff done quickly with pre-integrated technology to make your job easier
>>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>> _______________________________________________
>>>> Bluez-users mailing list
>>>> Bluez-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>>>
>>>>
>>>>
>>>>
>>>>
>>> -------------------------------------------------------------------------
>>> Using Tomcat but need to do more? Need to support web services, security?
>>> Get stuff done quickly with pre-integrated technology to make your job easier
>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>> _______________________________________________
>>> Bluez-users mailing list
>>> Bluez-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>>
>>>
>>>
>> -------------------------------------------------------------------------
>> Using Tomcat but need to do more? Need to support web services, security?
>> Get stuff done quickly with pre-integrated technology to make your job easier
>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>> _______________________________________________
>> Bluez-users mailing list
>> Bluez-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>
>>
>>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
prev parent reply other threads:[~2006-08-27 22:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-25 16:53 [Bluez-users] Still couldn't get AmbiCom BT2000E card to work Eran
2006-08-26 20:16 ` Massimo Piccioni
2006-08-26 20:32 ` Eran
2006-08-26 20:49 ` Massimo Piccioni
2006-08-27 22:04 ` Eran [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44F216FA.3020502@over-here.org \
--to=eran_l@over-here.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox