From: Paul Gardiner <osronline@glidos.net>
To: BlueZ users <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] problem in making multiple connections using single bluetooth adapter using bluez
Date: Tue, 02 Jan 2007 21:03:48 +0000 [thread overview]
Message-ID: <459AC8B4.7090407@glidos.net> (raw)
In-Reply-To: <1167745840.30886.77.camel@violet>
Marcel Holtmann wrote:
> Hi Paul,
>
>>> And once again "hcidump -X -V" is your friend in showing what
>>> actually happens on the Bluetooth chip level.
>> Are there people on this list that might be willing to look over
>> a posted dump then? My problem with DUN produced a trace, but
>> I gave up on it because there was no way I could understand
>> it. Is it worth my posting a dump?
>
> depends on what level the problem actually is. If it is hidden somewhere
> in the PPP part it is unlikely that you get a fast answer. If it is
> something obvious you might get your problem solved very quickly. So it
> is always worth posting the hcidump.
Great. Thanks for at least having a look. I think the problem is
early on because I get nothing in my logs from dund.
Here it is:
HCI sniffer - Bluetooth packet analyzer ver 1.33
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:09:2D:08:BC:57 class 0x100114 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:09:2D:08:BC:57 role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 42 bdaddr 00:09:2D:08:BC:57 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 42
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:09:2D:08:BC:57 mode 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> HCI Event: Max Slots Change (0x1b) plen 3
handle 42 slots 5
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0200
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0200 result 0 status 0
Connection successful
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 42 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 42
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 42 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:09:2D:08:BC:57 mode 2 clkoffset 0x0000
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 42 ptype 0xff1e
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3
3-DH5
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 42
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0200 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0200 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:09:2D:08:BC:57 name 'Pocket_PC2'
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 17
> ACL data: handle 42 flags 0x01 dlen 17
> ACL data: handle 42 flags 0x01 dlen 2
L2CAP(d): cid 0x0040 len 32 [psm 1]
SDP SSA Req: tid 0x0 len 0x1b
pat uuid-128 00001103-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 42 flags 0x02 dlen 52
L2CAP(d): cid 0x0200 len 48 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x2b
count 40
record #0
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x2 > >
record #1
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x2 > >
cont 00
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0201
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0201 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0200
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0200
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 0
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0201 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0201 flags 0x00 clen 4
MTU 1013
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0201 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 17
> ACL data: handle 42 flags 0x01 dlen 1
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 4 frame_type 0 credit_flow 15 pri 32 ack_timer 0
frame_size 1024 max_retrans 0 credits 7
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0201 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 4 pf 1 ilen 0 fcs 0xbc
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0201
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0201
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0202
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0202 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0202 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0202 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 17
> ACL data: handle 42 flags 0x01 dlen 17
> ACL data: handle 42 flags 0x01 dlen 2
L2CAP(d): cid 0x0040 len 32 [psm 1]
SDP SSA Req: tid 0x0 len 0x1b
pat uuid-128 00001103-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 42 flags 0x02 dlen 52
L2CAP(d): cid 0x0202 len 48 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x2b
count 40
record #0
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x2 > >
record #1
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x2 > >
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0203
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0203 result 0 status 0
Connection successful
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0202
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0202
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 0
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0203 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0203 flags 0x00 clen 4
MTU 1013
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
> ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0203 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 17
> ACL data: handle 42 flags 0x01 dlen 1
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 4 frame_type 0 credit_flow 15 pri 32 ack_timer 0
frame_size 1024 max_retrans 0 credits 7
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0203 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 4 pf 1 ilen 0 fcs 0xbc
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0203
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0203
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 42 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 42 reason 0x16
Reason: Connection Terminated by Local Host
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2007-01-02 21:03 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-02 7:54 [Bluez-users] problem in making multiple connections using single bluetooth adapter using bluez siddhant tewari
2007-01-02 8:09 ` Marcel Holtmann
2007-01-02 8:16 ` siddhant tewari
2007-01-02 8:28 ` Marcel Holtmann
2007-01-02 9:12 ` siddhant tewari
2007-01-02 10:18 ` Cris
2007-01-02 10:29 ` siddhant tewari
2007-01-02 11:44 ` Cris
2007-01-02 12:46 ` siddhant tewari
2007-01-02 13:04 ` Marcel Holtmann
2007-01-02 13:39 ` Paul Gardiner
2007-01-02 13:50 ` Marcel Holtmann
2007-01-02 21:03 ` Paul Gardiner [this message]
2007-01-02 21:18 ` Marcel Holtmann
2007-01-02 23:39 ` Paul Gardiner
2007-01-03 4:00 ` Tianlei Zhao
2007-01-03 7:18 ` Marcel Holtmann
2007-01-03 11:33 ` [Bluez-users] Problems fooling my S100 into using Bluez as a modem Paul Gardiner
2007-01-03 11:37 ` Paul Gardiner
2007-01-03 11:39 ` Paul Gardiner
2007-01-03 11:42 ` Paul Gardiner
2007-01-10 18:24 ` Paul Gardiner
2007-01-02 13:20 ` [Bluez-users] problem in making multiple connections using single bluetooth adapter using bluez Cris
2007-01-02 13:17 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=459AC8B4.7090407@glidos.net \
--to=osronline@glidos.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox