Re: [Bluez-users] Problems fooling my S100 into using Bluez as a modem

public inbox for linux-bluetooth@vger.kernel.org
 help / color / mirror / Atom feed

From: Paul Gardiner <osronline@glidos.net>
To: BlueZ users <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Problems fooling my S100 into using Bluez as a modem
Date: Wed, 03 Jan 2007 11:39:57 +0000	[thread overview]
Message-ID: <459B960D.3020006@glidos.net> (raw)
In-Reply-To: <459B947A.30803@glidos.net>

Paul Gardiner wrote:
> Also, I have to own up to something silly: when some of your
> statements seemed to imply that most of this should work
> without special configuration, I put the original config
> files in place, but didn't notice that dund was off by
> default.  I'll post some new dumps with that corrected.

This is a second dump of my S100 discovering Bluez, this
time after issuing the command

sdptool add DUN

After this, the S100 will attempt to use my server as
a modem:

HCI sniffer - Bluetooth packet analyzer ver 1.33
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Inquiry (0x01|0x0001) plen 5
     lap 0x9e8b33 len 6 num 0
 > HCI Event: Command Status (0x0f) plen 4
     Inquiry (0x01|0x0001) status 0x00 ncmd 1
 > HCI Event: Inquiry Complete (0x01) plen 1
     status 0x00
 > HCI Event: Connect Request (0x04) plen 10
     bdaddr 00:09:2D:08:BC:57 class 0x100114 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
     bdaddr 00:09:2D:08:BC:57 role 0x01
     Role: Slave
 > HCI Event: Command Status (0x0f) plen 4
     Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
 > HCI Event: Connect Complete (0x03) plen 11
     status 0x00 handle 42 bdaddr 00:09:2D:08:BC:57 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
     handle 42
 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
     bdaddr 00:09:2D:08:BC:57 mode 1
 > HCI Event: Command Status (0x0f) plen 4
     Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
 > HCI Event: Max Slots Change (0x1b) plen 3
     handle 42 slots 5
 > HCI Event: Command Status (0x0f) plen 4
     Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
     handle 42 policy 0x0f
     Link policy: RSWITCH HOLD SNIFF PARK
 > HCI Event: Command Complete (0x0e) plen 6
     Write Link Policy Settings (0x02|0x000d) ncmd 1
     status 0x00 handle 42
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
     handle 42 ptype 0xcc18
     Packet type: DM1 DM3 DM5 DH1 DH3 DH5
 > HCI Event: Read Remote Supported Features (0x0b) plen 11
     status 0x00 handle 42
     Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
 > HCI Event: Command Status (0x0f) plen 4
     Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
     bdaddr 00:09:2D:08:BC:57 mode 2 clkoffset 0x0000
 > HCI Event: Connection Packet Type Changed (0x1d) plen 5
     status 0x00 handle 42 ptype 0xff1e
     Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3 
3-DH5
 > HCI Event: Command Status (0x0f) plen 4
     Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
 > HCI Event: Remote Name Req Complete (0x07) plen 255
     status 0x00 bdaddr 00:09:2D:08:BC:57 name 'Pocket_PC2'
 > HCI Event: PIN Code Request (0x16) plen 6
     bdaddr 00:09:2D:08:BC:57
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
     bdaddr 00:09:2D:08:BC:57 len 4 pin '6969'
 > HCI Event: Command Complete (0x0e) plen 10
     PIN Code Request Reply (0x01|0x000d) ncmd 1
     status 0x00 bdaddr 00:09:2D:08:BC:57
 > HCI Event: Link Key Notification (0x18) plen 23
     bdaddr 00:09:2D:08:BC:57 key 0B9ACB6B85E27429E31F00CA81593DAA type 0
 > HCI Event: Disconn Complete (0x05) plen 4
     status 0x00 handle 42 reason 0x13
     Reason: Remote User Terminated Connection
 > HCI Event: Connect Request (0x04) plen 10
     bdaddr 00:09:2D:08:BC:57 class 0x100114 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
     bdaddr 00:09:2D:08:BC:57 role 0x01
     Role: Slave
 > HCI Event: Command Status (0x0f) plen 4
     Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
 > HCI Event: Connect Complete (0x03) plen 11
     status 0x00 handle 43 bdaddr 00:09:2D:08:BC:57 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
     handle 43
 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
     bdaddr 00:09:2D:08:BC:57 mode 1
 > HCI Event: Command Status (0x0f) plen 4
     Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
 > HCI Event: Max Slots Change (0x1b) plen 3
     handle 43 slots 5
 > ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Connect req: psm 1 scid 0x005a
< ACL data: handle 43 flags 0x02 dlen 16
     L2CAP(s): Connect rsp: dcid 0x0040 scid 0x005a result 0 status 0
       Connection successful
 > HCI Event: Command Status (0x0f) plen 4
     Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
     handle 43 policy 0x0f
     Link policy: RSWITCH HOLD SNIFF PARK
 > HCI Event: Command Complete (0x0e) plen 6
     Write Link Policy Settings (0x02|0x000d) ncmd 1
     status 0x00 handle 43
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
     handle 43 ptype 0xcc18
     Packet type: DM1 DM3 DM5 DH1 DH3 DH5
 > HCI Event: Command Status (0x0f) plen 4
     Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
     bdaddr 00:09:2D:08:BC:57 mode 2 clkoffset 0x0000
 > HCI Event: Connection Packet Type Changed (0x1d) plen 5
     status 0x00 handle 43 ptype 0xff1e
     Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3 
3-DH5
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 16
     L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
       MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x005a flags 0x00 result 0 clen 0
       Success
< ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Config req: dcid 0x005a flags 0x00 clen 0
 > HCI Event: Command Status (0x0f) plen 4
     Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > HCI Event: Read Remote Supported Features (0x0b) plen 11
     status 0x00 handle 43
     Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
 > ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
       Success
 > ACL data: handle 43 flags 0x02 dlen 17
 > ACL data: handle 43 flags 0x01 dlen 17
 > HCI Event: Remote Name Req Complete (0x07) plen 255
     status 0x00 bdaddr 00:09:2D:08:BC:57 name 'Pocket_PC2'
 > ACL data: handle 43 flags 0x01 dlen 4
     L2CAP(d): cid 0x0040 len 34 [psm 1]
         SDP SSA Req: tid 0x0 len 0x1d
           pat uuid-128 00001108-0000-1000-8000-00805f9b34fb
           max 4088
           aid(s) 0x0000 - 0xffff
           cont 00
< ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(d): cid 0x005a len 10 [psm 1]
         SDP SSA Rsp: tid 0x0 len 0x5
           count 2
           cont 00
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Disconn req: dcid 0x0040 scid 0x005a
< ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x005a
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Connect req: psm 1 scid 0x005b
< ACL data: handle 43 flags 0x02 dlen 16
     L2CAP(s): Connect rsp: dcid 0x0040 scid 0x005b result 0 status 0
       Connection successful
 > ACL data: handle 43 flags 0x02 dlen 16
     L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
       MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x005b flags 0x00 result 0 clen 0
       Success
< ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Config req: dcid 0x005b flags 0x00 clen 0
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
       Success
 > ACL data: handle 43 flags 0x02 dlen 17
 > ACL data: handle 43 flags 0x01 dlen 17
 > ACL data: handle 43 flags 0x01 dlen 4
     L2CAP(d): cid 0x0040 len 34 [psm 1]
         SDP SSA Req: tid 0x0 len 0x1d
           pat uuid-128 0000111e-0000-1000-8000-00805f9b34fb
           max 4088
           aid(s) 0x0000 - 0xffff
           cont 00
< ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(d): cid 0x005b len 10 [psm 1]
         SDP SSA Rsp: tid 0x0 len 0x5
           count 2
           cont 00
 > ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Disconn req: dcid 0x0040 scid 0x005b
< ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x005b
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Connect req: psm 1 scid 0x005c
< ACL data: handle 43 flags 0x02 dlen 16
     L2CAP(s): Connect rsp: dcid 0x0040 scid 0x005c result 0 status 0
       Connection successful
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 16
     L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
       MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x005c flags 0x00 result 0 clen 0
       Success
< ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Config req: dcid 0x005c flags 0x00 clen 0
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
       Success
 > ACL data: handle 43 flags 0x02 dlen 17
 > ACL data: handle 43 flags 0x01 dlen 17
 > ACL data: handle 43 flags 0x01 dlen 4
     L2CAP(d): cid 0x0040 len 34 [psm 1]
         SDP SSA Req: tid 0x0 len 0x1d
           pat uuid-128 00001103-0000-1000-8000-00805f9b34fb
           max 4088
           aid(s) 0x0000 - 0xffff
           cont 00
< ACL data: handle 43 flags 0x02 dlen 96
     L2CAP(d): cid 0x005c len 92 [psm 1]
         SDP SSA Rsp: tid 0x0 len 0x57
           count 84
           record #0
               aid 0x0000 (SrvRecHndl)
                  uint 0x10004
               aid 0x0001 (SrvClassIDList)
                  < uuid-16 0x1103 (DUN) uuid-16 0x1201 (Networking) >
               aid 0x0004 (ProtocolDescList)
                  < < uuid-16 0x0100 (L2CAP) > <
                  uuid-16 0x0003 (RFCOMM) uint 0x2 > >
               aid 0x0005 (BrwGrpList)
                  < uuid-16 0x1002 (PubBrwsGrp) >
               aid 0x0009 (BTProfileDescList)
                  < < uuid-16 0x1103 (DUN) uint 0x100 > >
               aid 0x0100 (SrvName)
                  str "Dial-Up Networking"
           cont 00
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Disconn req: dcid 0x0040 scid 0x005c
< ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x005c
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Connect req: psm 1 scid 0x005d
< ACL data: handle 43 flags 0x02 dlen 16
     L2CAP(s): Connect rsp: dcid 0x0040 scid 0x005d result 0 status 0
       Connection successful
 > ACL data: handle 43 flags 0x02 dlen 16
     L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
       MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x005d flags 0x00 result 0 clen 0
       Success
< ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Config req: dcid 0x005d flags 0x00 clen 0
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
       Success
 > ACL data: handle 43 flags 0x02 dlen 17
 > ACL data: handle 43 flags 0x01 dlen 17
 > ACL data: handle 43 flags 0x01 dlen 4
     L2CAP(d): cid 0x0040 len 34 [psm 1]
         SDP SSA Req: tid 0x0 len 0x1d
           pat uuid-128 00001101-0000-1000-8000-00805f9b34fb
           max 4088
           aid(s) 0x0000 - 0xffff
           cont 00
< ACL data: handle 43 flags 0x02 dlen 234
     L2CAP(d): cid 0x005d len 230 [psm 1]
         SDP SSA Rsp: tid 0x0 len 0xe1
           count 222
           record #0
               aid 0x0000 (SrvRecHndl)
                  uint 0x10002
               aid 0x0001 (SrvClassIDList)
                  < uuid-16 0x1101 (SP) >
               aid 0x0004 (ProtocolDescList)
                  < < uuid-16 0x0100 (L2CAP) > <
                  uuid-16 0x0003 (RFCOMM) uint 0x5 > >
               aid 0x0005 (BrwGrpList)
                  < uuid-16 0x1002 (PubBrwsGrp) >
               aid 0x0100 (SrvName)
                  str "KBtSerialChat"
               aid 0x0101 (SrvDesc)
                  str "KDE Bluetooth Serial Chat Service"
           record #1
               aid 0x0000 (SrvRecHndl)
                  uint 0x10003
               aid 0x0001 (SrvClassIDList)
                  < uuid-16 0x1101 (SP) >
               aid 0x0004 (ProtocolDescList)
                  < < uuid-16 0x0100 (L2CAP) > <
                  uuid-16 0x0003 (RFCOMM) uint 0x1b > >
               aid 0x0005 (BrwGrpList)
                  < uuid-16 0x1002 (PubBrwsGrp) >
               aid 0x0100 (SrvName)
                  str "KDE Bemused Server"
               aid 0x0101 (SrvDesc)
                  str "KDE Server for the Bemused remote control protocol"
           cont 00
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Disconn req: dcid 0x0040 scid 0x005d
< ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x005d
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Connect req: psm 1 scid 0x005e
< ACL data: handle 43 flags 0x02 dlen 16
     L2CAP(s): Connect rsp: dcid 0x0040 scid 0x005e result 0 status 0
       Connection successful
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 16
     L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
       MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x005e flags 0x00 result 0 clen 0
       Success
< ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Config req: dcid 0x005e flags 0x00 clen 0
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
       Success
 > ACL data: handle 43 flags 0x02 dlen 17
 > ACL data: handle 43 flags 0x01 dlen 17
 > ACL data: handle 43 flags 0x01 dlen 4
     L2CAP(d): cid 0x0040 len 34 [psm 1]
         SDP SSA Req: tid 0x0 len 0x1d
           pat uuid-128 0350278f-3dca-4e62-831d-a41165ff906c
           max 4088
           aid(s) 0x0000 - 0xffff
           cont 00
< ACL data: handle 43 flags 0x02 dlen 14
     L2CAP(d): cid 0x005e len 10 [psm 1]
         SDP SSA Rsp: tid 0x0 len 0x5
           count 2
           cont 00
 > ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Disconn req: dcid 0x0040 scid 0x005e
< ACL data: handle 43 flags 0x02 dlen 12
     L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x005e
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
     handle 43 packets 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
     handle 43 reason 0x13
     Reason: Remote User Terminated Connection
 > HCI Event: Command Status (0x0f) plen 4
     Disconnect (0x01|0x0006) status 0x00 ncmd 1
 > HCI Event: Disconn Complete (0x05) plen 4
     status 0x00 handle 43 reason 0x16
     Reason: Connection Terminated by Local Host

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

next prev parent reply	other threads:[~2007-01-03 11:39 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-01-02  7:54 [Bluez-users] problem in making multiple connections using single bluetooth adapter using bluez siddhant tewari
2007-01-02  8:09 ` Marcel Holtmann
2007-01-02  8:16   ` siddhant tewari
2007-01-02  8:28     ` Marcel Holtmann
2007-01-02  9:12       ` siddhant tewari
2007-01-02 10:18     ` Cris
2007-01-02 10:29       ` siddhant tewari
2007-01-02 11:44         ` Cris
2007-01-02 12:46           ` siddhant tewari
2007-01-02 13:04             ` Marcel Holtmann
2007-01-02 13:39               ` Paul Gardiner
2007-01-02 13:50                 ` Marcel Holtmann
2007-01-02 21:03                   ` Paul Gardiner
2007-01-02 21:18                     ` Marcel Holtmann
2007-01-02 23:39                       ` Paul Gardiner
2007-01-03  4:00                         ` Tianlei Zhao
2007-01-03  7:18                           ` Marcel Holtmann
2007-01-03 11:33                       ` [Bluez-users] Problems fooling my S100 into using Bluez as a modem Paul Gardiner
2007-01-03 11:37                         ` Paul Gardiner
2007-01-03 11:39                         ` Paul Gardiner [this message]
2007-01-03 11:42                         ` Paul Gardiner
2007-01-10 18:24                         ` Paul Gardiner
2007-01-02 13:20             ` [Bluez-users] problem in making multiple connections using single bluetooth adapter using bluez Cris
2007-01-02 13:17           ` Marcel Holtmann
  -- strict thread matches above, loose matches on Subject: below --
2007-01-16 19:10 [Bluez-users] Problems fooling my S100 into using Bluez as a modem Paul Gardiner
2007-01-18 13:13 ` Paul Gardiner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=459B960D.3020006@glidos.net \
    --to=osronline@glidos.net \
    --cc=bluez-users@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox