* [Bluez-devel] "Invalid CID in request"
@ 2007-08-06 7:21 Pierre-Yves Paulus
2007-08-06 7:52 ` Marcel Holtmann
0 siblings, 1 reply; 4+ messages in thread
From: Pierre-Yves Paulus @ 2007-08-06 7:21 UTC (permalink / raw)
To: BlueZ development
[-- Attachment #1: Type: text/plain, Size: 542 bytes --]
Hello,
Trying to perform a full SDP extraction on a nokia N70, I got several
time the error below (full hcidump log attached).
> ACL data: handle 11 flags 0x02 dlen 14
L2CAP(s): Command rej: reason 2 dcid 0x0000 scid 0x0040
Invalid CID in request
> ACL data: handle 11 flags 0x02 dlen 14
L2CAP(s): Command rej: reason 2 dcid 0x0000 scid 0x0040
Invalid CID in request
In don't understand what happens here, nor the meaning of this error.
Could someone please explain it?
Best Regards,
Pierre-Yves
[-- Attachment #2: hci.log --]
[-- Type: text/x-log, Size: 5029 bytes --]
2007-08-05 09:41:17,627 hci2 < HCI Command: Create Connection (0x01|0x0005) plen 13
2007-08-05 09:41:17,659 hci2 bdaddr 00:16:4E:D6:5D:1A ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
2007-08-05 09:41:17,660 hci2 Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2007-08-05 09:41:17,662 hci2 > HCI Event: Command Status (0x0f) plen 4
2007-08-05 09:41:17,663 hci2 Create Connection (0x01|0x0005) status 0x00 ncmd 1
2007-08-05 09:41:20,678 hci2 > HCI Event: Connect Complete (0x03) plen 11
2007-08-05 09:41:20,680 hci2 status 0x00 handle 11 bdaddr 00:16:4E:D6:5D:1A type ACL encrypt 0x00
2007-08-05 09:41:20,681 hci2 < ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:20,682 hci2 L2CAP(s): Connect req: psm 1 scid 0x0040
2007-08-05 09:41:20,683 hci2 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
2007-08-05 09:41:20,684 hci2 handle 11
2007-08-05 09:41:20,685 hci2 > HCI Event: Command Status (0x0f) plen 4
2007-08-05 09:41:20,686 hci2 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
2007-08-05 09:41:20,687 hci2 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
2007-08-05 09:41:20,688 hci2 handle 11 policy 0x0f
2007-08-05 09:41:20,689 hci2 Link policy: RSWITCH HOLD SNIFF PARK
2007-08-05 09:41:20,691 hci2 > HCI Event: Read Remote Supported Features (0x0b) plen 11
2007-08-05 09:41:20,692 hci2 status 0x00 handle 11
2007-08-05 09:41:20,693 hci2 Features: 0xbf 0xee 0x0f 0x46 0x98 0x19 0x00 0x00
2007-08-05 09:41:20,694 hci2 > HCI Event: Command Complete (0x0e) plen 6
2007-08-05 09:41:20,696 hci2 Write Link Policy Settings (0x02|0x000d) ncmd 1
2007-08-05 09:41:20,696 hci2 status 0x00 handle 11
2007-08-05 09:41:20,697 hci2 > HCI Event: Max Slots Change (0x1b) plen 3
2007-08-05 09:41:20,699 hci2 handle 11 slots 5
2007-08-05 09:41:20,700 hci2 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
2007-08-05 09:41:20,701 hci2 bdaddr 00:16:4E:D6:5D:1A mode 2 clkoffset 0x0000
2007-08-05 09:41:20,702 hci2 > HCI Event: Command Status (0x0f) plen 4
2007-08-05 09:41:20,703 hci2 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
2007-08-05 09:41:20,800 hci2 > ACL data: handle 11 flags 0x02 dlen 10
2007-08-05 09:41:20,801 hci2 L2CAP(s): Info req: type 2
2007-08-05 09:41:20,802 hci2 < ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:20,803 hci2 L2CAP(s): Info rsp: type 2 result 1
2007-08-05 09:41:20,804 hci2 Not supported
2007-08-05 09:41:20,966 hci2 > HCI Event: Number of Completed Packets (0x13) plen 5
2007-08-05 09:41:20,967 hci2 handle 11 packets 2
2007-08-05 09:41:28,013 hci2 > ACL data: handle 11 flags 0x02 dlen 16
2007-08-05 09:41:28,031 hci2 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
2007-08-05 09:41:28,032 hci2 Connection successful
2007-08-05 09:41:28,033 hci2 < ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:28,034 hci2 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
2007-08-05 09:41:28,035 hci2 > ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:28,036 hci2 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
2007-08-05 09:41:28,037 hci2 < ACL data: handle 11 flags 0x02 dlen 18
2007-08-05 09:41:28,046 hci2 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
2007-08-05 09:41:28,047 hci2 Success
2007-08-05 09:41:28,048 hci2 MTU 672
2007-08-05 09:41:28,049 hci2 > ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:28,050 hci2 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
2007-08-05 09:41:28,051 hci2 < ACL data: handle 11 flags 0x02 dlen 18
2007-08-05 09:41:28,052 hci2 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
2007-08-05 09:41:28,053 hci2 Success
2007-08-05 09:41:28,054 hci2 MTU 672
2007-08-05 09:41:28,055 hci2 > ACL data: handle 11 flags 0x02 dlen 14
2007-08-05 09:41:28,056 hci2 L2CAP(s): Command rej: reason 2 dcid 0x0040 scid 0x0000
2007-08-05 09:41:28,057 hci2 Invalid CID in request
2007-08-05 09:41:28,059 hci2 > HCI Event: Remote Name Req Complete (0x07) plen 255
2007-08-05 09:41:28,060 hci2 status 0x00 bdaddr 00:16:4E:D6:5D:1A name 'Nokia N70'
2007-08-05 09:41:28,216 hci2 > HCI Event: Number of Completed Packets (0x13) plen 5
2007-08-05 09:41:28,217 hci2 handle 11 packets 3
2007-08-05 09:41:28,301 hci2 > ACL data: handle 11 flags 0x02 dlen 14
2007-08-05 09:41:28,303 hci2 L2CAP(s): Command rej: reason 2 dcid 0x0000 scid 0x0040
2007-08-05 09:41:28,304 hci2 Invalid CID in request
2007-08-05 09:41:29,291 hci2 > ACL data: handle 11 flags 0x02 dlen 14
2007-08-05 09:41:29,293 hci2 L2CAP(s): Command rej: reason 2 dcid 0x0000 scid 0x0040
2007-08-05 09:41:29,294 hci2 Invalid CID in request
2007-08-05 09:41:32,094 hci2 > HCI Event: Disconn Complete (0x05) plen 4
2007-08-05 09:41:32,095 hci2 status 0x00 handle 11 reason 0x13
2007-08-05 09:41:32,096 hci2 Reason: Remote User Terminated Connection
[-- Attachment #3: Type: text/plain, Size: 315 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
[-- Attachment #4: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] "Invalid CID in request"
2007-08-06 7:21 [Bluez-devel] "Invalid CID in request" Pierre-Yves Paulus
@ 2007-08-06 7:52 ` Marcel Holtmann
2007-08-06 8:07 ` Pierre-Yves Paulus
0 siblings, 1 reply; 4+ messages in thread
From: Marcel Holtmann @ 2007-08-06 7:52 UTC (permalink / raw)
To: BlueZ development
Hi Pierre-Yves,
> Trying to perform a full SDP extraction on a nokia N70, I got several
> time the error below (full hcidump log attached).
>
> > ACL data: handle 11 flags 0x02 dlen 14
> L2CAP(s): Command rej: reason 2 dcid 0x0000 scid 0x0040
> Invalid CID in request
> > ACL data: handle 11 flags 0x02 dlen 14
> L2CAP(s): Command rej: reason 2 dcid 0x0000 scid 0x0040
> Invalid CID in request
>
> In don't understand what happens here, nor the meaning of this error.
> Could someone please explain it?
what kernel are you using? And I need the full trace from the HCI create
connection to the HCI disconnect.
Regards
Marcel
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] "Invalid CID in request"
2007-08-06 7:52 ` Marcel Holtmann
@ 2007-08-06 8:07 ` Pierre-Yves Paulus
2007-08-06 8:14 ` Marcel Holtmann
0 siblings, 1 reply; 4+ messages in thread
From: Pierre-Yves Paulus @ 2007-08-06 8:07 UTC (permalink / raw)
To: BlueZ development
[-- Attachment #1: Type: text/plain, Size: 337 bytes --]
Hi Marcel,
> what kernel are you using? And I need the full trace from the HCI create
> connection to the HCI disconnect.
The kernel used is 2.6.21-2-486 (from debian).
The file I attached to my last e-mail (re-attached to this one) contains
the output of "hcidump -XV", are you requesting something else?
Best Regards,
Pierre-Yves
[-- Attachment #2: hci.log --]
[-- Type: text/x-log, Size: 5029 bytes --]
2007-08-05 09:41:17,627 hci2 < HCI Command: Create Connection (0x01|0x0005) plen 13
2007-08-05 09:41:17,659 hci2 bdaddr 00:16:4E:D6:5D:1A ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
2007-08-05 09:41:17,660 hci2 Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2007-08-05 09:41:17,662 hci2 > HCI Event: Command Status (0x0f) plen 4
2007-08-05 09:41:17,663 hci2 Create Connection (0x01|0x0005) status 0x00 ncmd 1
2007-08-05 09:41:20,678 hci2 > HCI Event: Connect Complete (0x03) plen 11
2007-08-05 09:41:20,680 hci2 status 0x00 handle 11 bdaddr 00:16:4E:D6:5D:1A type ACL encrypt 0x00
2007-08-05 09:41:20,681 hci2 < ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:20,682 hci2 L2CAP(s): Connect req: psm 1 scid 0x0040
2007-08-05 09:41:20,683 hci2 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
2007-08-05 09:41:20,684 hci2 handle 11
2007-08-05 09:41:20,685 hci2 > HCI Event: Command Status (0x0f) plen 4
2007-08-05 09:41:20,686 hci2 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
2007-08-05 09:41:20,687 hci2 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
2007-08-05 09:41:20,688 hci2 handle 11 policy 0x0f
2007-08-05 09:41:20,689 hci2 Link policy: RSWITCH HOLD SNIFF PARK
2007-08-05 09:41:20,691 hci2 > HCI Event: Read Remote Supported Features (0x0b) plen 11
2007-08-05 09:41:20,692 hci2 status 0x00 handle 11
2007-08-05 09:41:20,693 hci2 Features: 0xbf 0xee 0x0f 0x46 0x98 0x19 0x00 0x00
2007-08-05 09:41:20,694 hci2 > HCI Event: Command Complete (0x0e) plen 6
2007-08-05 09:41:20,696 hci2 Write Link Policy Settings (0x02|0x000d) ncmd 1
2007-08-05 09:41:20,696 hci2 status 0x00 handle 11
2007-08-05 09:41:20,697 hci2 > HCI Event: Max Slots Change (0x1b) plen 3
2007-08-05 09:41:20,699 hci2 handle 11 slots 5
2007-08-05 09:41:20,700 hci2 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
2007-08-05 09:41:20,701 hci2 bdaddr 00:16:4E:D6:5D:1A mode 2 clkoffset 0x0000
2007-08-05 09:41:20,702 hci2 > HCI Event: Command Status (0x0f) plen 4
2007-08-05 09:41:20,703 hci2 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
2007-08-05 09:41:20,800 hci2 > ACL data: handle 11 flags 0x02 dlen 10
2007-08-05 09:41:20,801 hci2 L2CAP(s): Info req: type 2
2007-08-05 09:41:20,802 hci2 < ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:20,803 hci2 L2CAP(s): Info rsp: type 2 result 1
2007-08-05 09:41:20,804 hci2 Not supported
2007-08-05 09:41:20,966 hci2 > HCI Event: Number of Completed Packets (0x13) plen 5
2007-08-05 09:41:20,967 hci2 handle 11 packets 2
2007-08-05 09:41:28,013 hci2 > ACL data: handle 11 flags 0x02 dlen 16
2007-08-05 09:41:28,031 hci2 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
2007-08-05 09:41:28,032 hci2 Connection successful
2007-08-05 09:41:28,033 hci2 < ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:28,034 hci2 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
2007-08-05 09:41:28,035 hci2 > ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:28,036 hci2 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
2007-08-05 09:41:28,037 hci2 < ACL data: handle 11 flags 0x02 dlen 18
2007-08-05 09:41:28,046 hci2 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
2007-08-05 09:41:28,047 hci2 Success
2007-08-05 09:41:28,048 hci2 MTU 672
2007-08-05 09:41:28,049 hci2 > ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:28,050 hci2 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
2007-08-05 09:41:28,051 hci2 < ACL data: handle 11 flags 0x02 dlen 18
2007-08-05 09:41:28,052 hci2 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
2007-08-05 09:41:28,053 hci2 Success
2007-08-05 09:41:28,054 hci2 MTU 672
2007-08-05 09:41:28,055 hci2 > ACL data: handle 11 flags 0x02 dlen 14
2007-08-05 09:41:28,056 hci2 L2CAP(s): Command rej: reason 2 dcid 0x0040 scid 0x0000
2007-08-05 09:41:28,057 hci2 Invalid CID in request
2007-08-05 09:41:28,059 hci2 > HCI Event: Remote Name Req Complete (0x07) plen 255
2007-08-05 09:41:28,060 hci2 status 0x00 bdaddr 00:16:4E:D6:5D:1A name 'Nokia N70'
2007-08-05 09:41:28,216 hci2 > HCI Event: Number of Completed Packets (0x13) plen 5
2007-08-05 09:41:28,217 hci2 handle 11 packets 3
2007-08-05 09:41:28,301 hci2 > ACL data: handle 11 flags 0x02 dlen 14
2007-08-05 09:41:28,303 hci2 L2CAP(s): Command rej: reason 2 dcid 0x0000 scid 0x0040
2007-08-05 09:41:28,304 hci2 Invalid CID in request
2007-08-05 09:41:29,291 hci2 > ACL data: handle 11 flags 0x02 dlen 14
2007-08-05 09:41:29,293 hci2 L2CAP(s): Command rej: reason 2 dcid 0x0000 scid 0x0040
2007-08-05 09:41:29,294 hci2 Invalid CID in request
2007-08-05 09:41:32,094 hci2 > HCI Event: Disconn Complete (0x05) plen 4
2007-08-05 09:41:32,095 hci2 status 0x00 handle 11 reason 0x13
2007-08-05 09:41:32,096 hci2 Reason: Remote User Terminated Connection
[-- Attachment #3: Type: text/plain, Size: 315 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
[-- Attachment #4: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] "Invalid CID in request"
2007-08-06 8:07 ` Pierre-Yves Paulus
@ 2007-08-06 8:14 ` Marcel Holtmann
0 siblings, 0 replies; 4+ messages in thread
From: Marcel Holtmann @ 2007-08-06 8:14 UTC (permalink / raw)
To: BlueZ development
Hi Pierre-Yves,
> > what kernel are you using? And I need the full trace from the HCI create
> > connection to the HCI disconnect.
>
> The kernel used is 2.6.21-2-486 (from debian).
>
> The file I attached to my last e-mail (re-attached to this one) contains
> the output of "hcidump -XV", are you requesting something else?
this is unlikely, but try it with only one adapter attached to your
system. I don't expect that to be a problem, because the kernel is
designed to handle the case. However I wanna rule out that it is a
multiple adapter issue.
Second, please try a 2.6.23-rc2 kernel. My wild guess is that the L2CAP
configuration process screws up the phone. We added a fix for that to
make it fully specification compliant.
Regards
Marcel
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-08-06 8:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-08-06 7:21 [Bluez-devel] "Invalid CID in request" Pierre-Yves Paulus
2007-08-06 7:52 ` Marcel Holtmann
2007-08-06 8:07 ` Pierre-Yves Paulus
2007-08-06 8:14 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox