* [Bluez-users] Headset disconnects immediately
@ 2007-12-29 12:39 Jesper Holck
0 siblings, 0 replies; only message in thread
From: Jesper Holck @ 2007-12-29 12:39 UTC (permalink / raw)
To: bluez-users
I have installed kde bluetooth and try to connect to Jabra 250v headset,
and at first things seem to succeed - I can pair with the headset and
also connect with it - but then the headset seems to disconnect
immediately. An answer to a previous post
(http://article.gmane.org/gmane.linux.bluez.user/13073) suggest that
this might have to do with lack of support for the headset profile, but
if this is so - is it a dongle or a headset problem? and what can I do
about it?
Installed versions:
kdebluetooth-libs-1.0-0.37.beta8.fc8
kdebluetooth-1.0-0.37.beta8.fc8
bluez-utils-alsa-3.20-4.fc8
bluez-libs-devel-3.20-1.fc8
bluez-libs-3.20-1.fc8
bluez-utils-3.20-4.fc8
bluez-hcidump-1.40-1.fc8
The dongle is a Cambridge Silicon type. I run 64-bit Linux.
HCI dump:
< HCI Command: Inquiry (0x01|0x0001) plen 5
lap 0x9e8b33 len 8 num 0
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) status 0x00 ncmd 1
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:07:A4:27:3A:17 mode 1 clkoffset 0x5615 class 0x200404
< HCI Command: Inquiry Cancel (0x01|0x0002) plen 0
> HCI Event: Command Complete (0x0e) plen 4
Inquiry Cancel (0x01|0x0002) ncmd 1
status 0x00
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:07:A4:27:3A:17 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:07:A4:27:3A:17
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
bdaddr 00:07:A4:27:3A:17 len 4 pin '0000'
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Reply (0x01|0x000d) ncmd 1
status 0x00 bdaddr 00:07:A4:27:3A:17
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:07:A4:27:3A:17 key 9C4633B5A7A3874941EB30C4C26A3497 type 0
Type: Combination Key
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 41 bdaddr 00:07:A4:27:3A:17 type ACL encrypt 0x00
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 41
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 41 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:07:A4:27:3A:17 mode 1
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 41
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:07:A4:27:3A:17 mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0048 scid 0x0040 result 1 status 2
Connection pending - Authorization pending
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 41
Features: 0xfc 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:07:A4:27:3A:17 name 'Jabra BT 250v'
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0048 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0048 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 48
< ACL data: handle 41 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0048 flags 0x00 result 0 clen 4
Success
MTU 48
< ACL data: handle 41 flags 0x02 dlen 17
L2CAP(d): cid 0x0048 len 13 [psm 1]
SDP SS Req: tid 0x0 len 0x8
pat uuid-16 0x1108 (Headset)
max 64
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 1]
SDP SS Rsp: tid 0x0 len 0x9
count 1
handle 0x10000
cont 00
< ACL data: handle 41 flags 0x02 dlen 23
L2CAP(d): cid 0x0048 len 19 [psm 1]
SDP SA Req: tid 0x1 len 0xe
handle 0x10000
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 27
> ACL data: handle 41 flags 0x01 dlen 25
L2CAP(d): cid 0x0040 len 48 [psm 1]
SDP SA Rsp: tid 0x1 len 0x2b
count 38
cont 02 00 1F
< ACL data: handle 41 flags 0x02 dlen 25
L2CAP(d): cid 0x0048 len 21 [psm 1]
SDP SA Req: tid 0x2 len 0x10
handle 0x10000
max 65535
aid(s) 0x0000 - 0xffff
cont 02 00 1F
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 27
> ACL data: handle 41 flags 0x01 dlen 16
L2CAP(d): cid 0x0040 len 39 [psm 1]
SDP SA Rsp: tid 0x2 len 0x22
count 31
aid 0x0000 (SrvRecHndl)
uint 0x10000
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1108 (Headset) uuid-16 0x1203 (Audio) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1108 (Headset) uint 0x100 > >
aid 0x0100 (SrvName)
str "Headset"
aid 0x0302 (unknown)
bool 0x1
cont 00
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0049 scid 0x0041 result 1 status 2
Connection pending - Authorization pending
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0048 scid 0x0040
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0049 scid 0x0041 result 0 status 0
Connection successful
< ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0049 flags 0x00 clen 4
MTU 1013
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0048 scid 0x0040
> ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 1013
< ACL data: handle 41 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0049 flags 0x00 result 0 clen 4
Success
MTU 1013
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0049 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 41 flags 0x02 dlen 18
L2CAP(d): cid 0x0049 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 1008 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 127 max_retrans 0 credits 0
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0049 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0049 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0049 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 2 pf 1 ilen 0 fcs 0xb8
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 11
> ACL data: handle 41 flags 0x01 dlen 1
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0049 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0049 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
> ACL data: handle 41 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 15
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0049 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0049 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0049 scid 0x0041
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 41 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 41 reason 0x16
Reason: Connection Terminated by Local Host
It would be so nice to make it work :-)
Happy new year to everybody,
Jesper, Denmark
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-12-29 12:39 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-12-29 12:39 [Bluez-users] Headset disconnects immediately Jesper Holck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox