* [Bluez-devel] Sychip/Murata WLBT8111 experience?
@ 2008-05-02 14:28 Nils Faerber
2008-05-05 20:50 ` Tim Chick
0 siblings, 1 reply; 2+ messages in thread
From: Nils Faerber @ 2008-05-02 14:28 UTC (permalink / raw)
To: BlueZ development
Hi!
By some lucky coincidence I have a development board with a
Sychip/Murata WLBT8111 on it laying on my desk.
I try to get the UART HCI to respond but so far it is not recognised by
BlueZ. I see that the module sends data about every 300 to 400
miliseconds but with any baudrate I tried BlueZ only sais "h4_recv:
Unknown HCI packet type...".
So, has anyone else yet experience with that chip?
Any hints or tricks to make it behave?
Objective for me later on is to get audio working, first A2DP and then
probably SCO...
Any hint would be appreciated ;)
Thanks!
Cheers
nils faerber
--
kernel concepts GbR Tel: +49-271-771091-12
Sieghuetter Hauptweg 48 Fax: +49-271-771091-19
D-57072 Siegen Mob: +49-176-21024535
--
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Bluez-devel] Sychip/Murata WLBT8111 experience?
2008-05-02 14:28 [Bluez-devel] Sychip/Murata WLBT8111 experience? Nils Faerber
@ 2008-05-05 20:50 ` Tim Chick
0 siblings, 0 replies; 2+ messages in thread
From: Tim Chick @ 2008-05-05 20:50 UTC (permalink / raw)
To: bluez-devel
On Friday 02 May 2008 15:28:53 Nils Faerber wrote:
> Hi!
> By some lucky coincidence I have a development board with a
> Sychip/Murata WLBT8111 on it laying on my desk.
> I try to get the UART HCI to respond but so far it is not recognised by
> BlueZ. I see that the module sends data about every 300 to 400
> miliseconds but with any baudrate I tried BlueZ only sais "h4_recv:
> Unknown HCI packet type...".
>
> So, has anyone else yet experience with that chip?
> Any hints or tricks to make it behave?
>
You might like to try BCSP protocol?
Cheers,
TIm
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-05-05 20:50 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-05-02 14:28 [Bluez-devel] Sychip/Murata WLBT8111 experience? Nils Faerber
2008-05-05 20:50 ` Tim Chick
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox