AW: Re: Support for 0489:e031 Foxconn / Hon Hai

AW: Re: Support for 0489:e031 Foxconn / Hon Hai

[thilo]

Hey Marcel,

> what about the usb-devices.sh script output or /proc/bus/usb/devices
> content for this adatper.

The output for the bluetooth device from /usr/bin/usb-devices (on Ubuntu=
 11.04) is the following:

T:  Bus=3D02 Lev=3D02 Prnt=3D02 Port=3D03 Cnt=3D03 Dev#=3D  5 Spd=3D12  =
MxCh=3D 0
D:  Ver=3D 2.00 Cls=3Dff(vend.) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D  1=

P:  Vendor=3D0489 ProdID=3De031 Rev=3D01.12
S:  Manufacturer=3DBroadcom Corp
S:  Product=3DBCM20702A0
S:  SerialNumber=3DEC55F9EADE09
C:  #Ifs=3D 4 Cfg#=3D 1 Atr=3De0 MxPwr=3D0mA
I:  If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3Dff(vend.) Sub=3D01 Prot=3D01 Drive=
r=3D(none)
I:  If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3Dff(vend.) Sub=3D01 Prot=3D01 Drive=
r=3D(none)
I:  If#=3D 2 Alt=3D 0 #EPs=3D 2 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Drive=
r=3D(none)
I:  If#=3D 3 Alt=3D 0 #EPs=3D 0 Cls=3Dfe(app. ) Sub=3D01 Prot=3D01 Drive=
r=3D(none)

The folder /proc/bus/usb doesn't exists here. Are the informations from =
/sys/bus/usb the same?
When yes, which are you really interessted in (as there are plenty files=
 for that device)?

Can I provide other usefull informations?

Ciao
Thilo

Re: AW: Re: Support for 0489:e031 Foxconn / Hon Hai

[Marcel Holtmann]

Hi Thilo,

> > what about the usb-devices.sh script output or /proc/bus/usb/devices
> > content for this adatper.
> 
> The output for the bluetooth device from /usr/bin/usb-devices (on Ubuntu 11.04) is the following:
> 
> T:  Bus=02 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#=  5 Spd=12  MxCh= 0
> D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=0489 ProdID=e031 Rev=01.12
> S:  Manufacturer=Broadcom Corp
> S:  Product=BCM20702A0
> S:  SerialNumber=EC55F9EADE09
> C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
> I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
> I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

so Broadcom is being stupid here and using vendor specific descriptors
instead of just following the proper USB descriptors for Bluetooth. You
need to add the VID and PID to btusb.c device list.

Regards

Marcel

AW: Re: Support for 0489:e031 Foxconn / Hon Hai

[thilo]

Hey Marcel,

>> Here is the output of hciconfig hci0 -a:
>> $ hciconfig hci0 -a
>> hci0:=09Type: BR/EDR  Bus: USB
>> =09BD Address: EC:55:F9:EA:DE:09  ACL MTU: 1021:8  SCO MTU: 64:1
>> =09UP RUNNING PSCAN ISCAN 
>> =09RX bytes:5947 acl:0 sco:0 events:198 errors:0
>> =09TX bytes:1986 acl:0 sco:0 commands:117 errors:0
>> =09Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x7b 0x87
>> =09Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
>> =09Link policy: RSWITCH HOLD SNIFF PARK 
>> =09Link mode: SLAVE ACCEPT 
>> =09Name: 'abg4858n-lnx'
>> =09Class: 0x4a0100
>> =09Service Classes: Networking, Capturing, Telephony
>> =09Device Class: Computer, Uncategorized
>> =09HCI Version: 4.0 (0x6)  Revision: 0x0
>> =09LMP Version: 4.0 (0x6)  Subversion: 0x2118
>> =09Manufacturer: Broadcom Corporation (15)
>> 
>> Looks ok isn't it?
>
>Yes, and getting a nice Low-Energy capable dongle is great. Where did
>you get this from? I like to get a bunch of these for testing.

It's build-in into the Lifebook E751 of Fujitsu (when ordered with Bluet=
ooth).
The product page for the E751: http://lifebook.uk.ts.fujitsu.com/Product=
s/Performance/LIFEBOOK-E751.htm
More an advertisment page ;) ... and the only thing about Bluetooth is t=
his sentence: "Ultimate connectivity with optional embedded 3G/UMTS, WLA=
N and Bluetooth=C2=AE"

>> But I can't add any devices. When I search for devices VERY long, I c=
an find one or two. But only devices which I can't pair with.
>> e.g. I never found my headset, altought it is in pairing mode when I =
start searching.
>> 
>> During search, hcidump -v shows only this:
>> > HCI Event: Inquiry Complete (0x01) plen 1
>>     status 0x00
>> > HCI Event: Inquiry Complete (0x01) plen 1
>>     status 0x00
>> > HCI Event: Inquiry Complete (0x01) plen 1
>>     status 0x00
>> > HCI Event: Inquiry Complete (0x01) plen 1
>>     status 0x00
>> > HCI Event: Inquiry Complete (0x01) plen 1
>>     status 0x00
>> > HCI Event: Inquiry Complete (0x01) plen 1
>>     status 0x00
>> > HCI Event: Inquiry Complete (0x01) plen 1
>>     status 0x00
>> > HCI Event: Inquiry Complete (0x01) plen 1
>>     status 0x00
>> > HCI Event: Inquiry Complete (0x01) plen 1
>>     status 0x00
>> 
>> so no problem here too.
>> 
>> Any suggestions what I could try next? Anything which could give me i=
nformations whats going wrong here?
>
>Maybe the antenna is kinda wrongly calibrated, but I can't tell any
>details here. That is hardware specific.

So you think it's not connected correctly or what means wrongly calibrat=
ed?
Perhaps I can give it a try via Virtualbox under windows ... 

Ciao
Thilo