[Bluez-users] Fwd: Socket CF Bluetooth Adapter with mpc5200

[Bluez-users] Fwd: Socket CF Bluetooth Adapter with mpc5200

[Kai Römer]

Hello!

 I want to use the CF-Bluetooth adapter from Socket in my TQM5200 board
 with integrated CF slot. How can i activate the card in Kernel?

 Can i use this card with a standard usb card reader?

 greetings Kai

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Fwd: Socket CF Bluetooth Adapter with mpc5200

[Marcel Holtmann]

Hi Kai,

> I want to use the CF-Bluetooth adapter from Socket in my TQM5200 board
> with integrated CF slot. How can i activate the card in Kernel?

depends on the version of the card. Some use the dtl1_cs driver.  
Others need to use hciattach to announce the serial port to the kernel.

> Can i use this card with a standard usb card reader?

No.

Regards

Marcel


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Fwd: Socket CF Bluetooth Adapter with mpc5200

[Kai Römer]

Hi Macel!
Thanks for your immediate answer! But still i have no clue how to make it work.

* So far i found that it is a Socket BT CF adapter rev L.
* I added anything i found in kernel related to PCMCIA and bluetooth
* installed sys-apps/pcmcia-cs-3.2.8-r2 (using gentoo)

My system works fine with my bt usb adapter (CSR) But with this CF
adapter I get no messages in dmesg or any hint about where this card
is!

So my question: How do i get access to this CF BT card? Does it work
via PCMCIA? I have no clue even where to start! Perhaps someone can
give me a hint where to begin.

My Sys is a TB5200 made by TQ similar to this:
http://tq-components.de/307+M5e72ba27d84.html

Thanks for your help!

Kai

2008/3/31, Marcel Holtmann <marcel@holtmann.org>:
> Hi Kai,
>
>
>  > I want to use the CF-Bluetooth adapter from Socket in my TQM5200 board
>  > with integrated CF slot. How can i activate the card in Kernel?
>
>
> depends on the version of the card. Some use the dtl1_cs driver.
>  Others need to use hciattach to announce the serial port to the kernel.
>
>
>  > Can i use this card with a standard usb card reader?
>
>
> No.
>
>  Regards
>
>  Marcel
>
>
>  -------------------------------------------------------------------------
>  Check out the new SourceForge.net Marketplace.
>  It's the best place to buy or sell services for
>  just about anything Open Source.
>  http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
>  _______________________________________________
>  Bluez-users mailing list
>  Bluez-users@lists.sourceforge.net
>  https://lists.sourceforge.net/lists/listinfo/bluez-users
>

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Fwd: Socket CF Bluetooth Adapter with mpc5200

[Anssi Saari]

On Mon, Mar 31, 2008 at 06:51:58PM +0200, Marcel Holtmann wrote:
> Hi Kai,
> 
> > I want to use the CF-Bluetooth adapter from Socket in my TQM5200 board
> > with integrated CF slot. How can i activate the card in Kernel?
> 
> depends on the version of the card. Some use the dtl1_cs driver.  
> Others need to use hciattach to announce the serial port to the kernel.

Old thread, but did the dtl1_cs driver get fixed at some point? I still
have an old Socket CF card using that chipset somewhere, but the driver
wasn't very useful when I last used it back in 2005 or so. Basically I
got frequent hangs at EDGE speeds to my cell phone, with the blazing
speed of 5 kB/s or so. Ejecting and inserting the card was needed to
get it working again.



-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft 
Defy all challenges. Microsoft(R) Visual Studio 2008. 
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users