[PATCH v4 4/4] Bluetooth: btintel_pcie: clear the GP0 cause with a W1C write

[PATCH v4 4/4] Bluetooth: btintel_pcie: clear the GP0 cause with a W1C write

[Ravindra]

MSIX_HW_INT_CAUSES is a write-one-to-clear register. Using a
read-modify-write helper writes zero to GP0, leaving the cause uncleared,
and can acknowledge unrelated pending causes through the read value.

Write only the GP0 bit directly, matching the interrupt handler's W1C
acknowledgment convention.

Fixes: 88c6216a52ea ("Bluetooth: btintel_pcie: Suspend/Resume: Controller doorbell interrupt handling")
Signed-off-by: Ravindra <ravindra@intel.com>
Tested-by: Sergey Lebedev <lsa.uz@pm.me>
Reviewed-by: Sergey Lebedev <lsa.uz@pm.me>
---
 drivers/bluetooth/btintel_pcie.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/btintel_pcie.c b/drivers/bluetooth/btintel_pcie.c
index 553fa927cf0a..9fda057ca9a1 100644
--- a/drivers/bluetooth/btintel_pcie.c
+++ b/drivers/bluetooth/btintel_pcie.c
@@ -4217,10 +4217,12 @@ static int btintel_pcie_set_dxstate(struct btintel_pcie_data *data, u32 dxstate)
 				    "Timeout (%u ms) on alive interrupt for D%d entry, retry count %d",
 				    dx_intr_timeout_ms, dxstate, retry);
 
-			/* clear gp0 cause */
-			btintel_pcie_clr_reg_bits(data,
-						  BTINTEL_PCIE_CSR_MSIX_HW_INT_CAUSES,
-						  BTINTEL_PCIE_MSIX_HW_INT_CAUSES_GP0);
+			/* MSIX_HW_INT_CAUSES is W1C. Write only GP0 so other
+			 * pending causes are not acknowledged here.
+			 */
+			btintel_pcie_wr_reg32(data,
+					      BTINTEL_PCIE_CSR_MSIX_HW_INT_CAUSES,
+					      BTINTEL_PCIE_MSIX_HW_INT_CAUSES_GP0);
 		}
 
 		/* gp0_received is set at the top of the handler, before the switch on
-- 
2.43.0

RE: [v4,4/4] Bluetooth: btintel_pcie: clear the GP0 cause with a W1C write

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 863 bytes --]

This is an automated email and please do not reply to this email.

Dear Submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
While preparing the CI tests, the patches you submitted couldn't be applied to the current HEAD of the repository.

----- Output -----

error: patch failed: drivers/bluetooth/btintel_pcie.c:4217
error: drivers/bluetooth/btintel_pcie.c: patch does not apply
hint: Use 'git am --show-current-patch=diff' to see the failed patch
hint: When you have resolved this problem, run "git am --continue".
hint: If you prefer to skip this patch, run "git am --skip" instead.
hint: To restore the original branch and stop patching, run "git am --abort".
hint: Disable this message with "git config set advice.mergeConflict false"

Please resolve the issue and submit the patches again.


---
Regards,
Linux Bluetooth

Re: [PATCH v4 4/4] Bluetooth: btintel_pcie: clear the GP0 cause with a W1C write

[patchwork-bot+bluetooth]

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

On Sun, 27 Sep 2026 20:53:56 +0530 you wrote:
> MSIX_HW_INT_CAUSES is a write-one-to-clear register. Using a
> read-modify-write helper writes zero to GP0, leaving the cause uncleared,
> and can acknowledge unrelated pending causes through the read value.
> 
> Write only the GP0 bit directly, matching the interrupt handler's W1C
> acknowledgment convention.
> 
> [...]

Here is the summary with links:
  - [v4,4/4] Bluetooth: btintel_pcie: clear the GP0 cause with a W1C write
    https://git.kernel.org/bluetooth/bluetooth-next/c/6091d2771395

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html