[PATCH v2 0/2] Bluetooth for the RTL8852BS on BPI-F3

[PATCH v2 0/2] Bluetooth for the RTL8852BS on BPI-F3

[Frédéric Mahé]

The BPI-F3 (SpacemiT K1) carries an RTL8852BS Wi-Fi + Bluetooth module.
Wi-Fi (SDIO) has no upstream driver, but Bluetooth on UART works with
the existing hci_h5/btrtl code and linux-firmware's rtl8852bs files.

Patch 1 documents the compatible, with rtl8822cs-bt as fallback, so no
driver change is needed. Patch 2 enables it on the BPI-F3.

GPIO usage was tested one line at a time: GPIO 63 is the power/enable
line and GPIO 64 the device wake line. The vendor DT also drives
GPIO 65 and GPIO 67; Bluetooth works without them (and RSSI is the
same with GPIO 67 high or low), so they are left out.

Changes in v2:
- Patch 2: set slow_uart2 to 48 MHz with assigned-clock-rates instead
  of relying on the bootloader (Troy). Checked that a 24 MHz setting
  is applied, then 48 MHz.
- Patch 1: add Conor's Acked-by and Alistair's Reviewed-by.

Link to v1: https://lore.kernel.org/r/20261110074607.363918-1-frederic.mahe@cirad.fr

Frédéric Mahé (2):
  dt-bindings: net: bluetooth: realtek: Add RTL8852BS
  riscv: dts: spacemit: enable Bluetooth on BPI-F3

 .../net/bluetooth/realtek,bluetooth.yaml        | 11 +++++++----
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 17 +++++++++++++++++
 2 files changed, 24 insertions(+), 4 deletions(-)


base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
-- 
2.47.3

[PATCH v2 1/2] dt-bindings: net: bluetooth: realtek: Add RTL8852BS

[Frédéric Mahé]

The RTL8852BS is a Wi-Fi 6 + Bluetooth 5.2 chip with Wi-Fi on SDIO
and Bluetooth on UART (H5). Its Bluetooth part works with the
RTL8822CS driver data, so use realtek,rtl8822cs-bt as fallback.

This patch was prepared with the help of an AI assistant (Claude),
which also ran the tests.

Signed-off-by: Frédéric Mahé <frederic.mahe@cirad.fr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
---
 .../bindings/net/bluetooth/realtek,bluetooth.yaml     | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/bluetooth/realtek,bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/realtek,bluetooth.yaml
index 7d567122b..ffdf13b05 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/realtek,bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/realtek,bluetooth.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/net/bluetooth/realtek,bluetooth.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS Bluetooth
+title: RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS/RTL8852BS Bluetooth
 
 maintainers:
   - Vasily Khoruzhick <anarsoul@gmail.com>
   - Alistair Francis <alistair@alistair23.me>
 
 description:
-  RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part
-  is connected over SDIO, while BT is connected over serial. It speaks
-  H5 protocol with few extra commands to upload firmware and change
+  RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS/RTL8852BS is a WiFi + BT chip.
+  WiFi part is connected over SDIO, while BT is connected over serial. It
+  speaks H5 protocol with few extra commands to upload firmware and change
   module speed.
 
 properties:
@@ -28,6 +28,9 @@ properties:
           - enum:
               - realtek,rtl8821cs-bt
           - const: realtek,rtl8723bs-bt
+      - items:
+          - const: realtek,rtl8852bs-bt
+          - const: realtek,rtl8822cs-bt
 
   device-wake-gpios:
     maxItems: 1
-- 
2.47.3

Re: [PATCH v2 1/2] dt-bindings: net: bluetooth: realtek: Add RTL8852BS

[Troy Mitchell]

[-- Attachment #1: Type: text/plain, Size: 630 bytes --]

On Wed Nov 11, 2026 at 9:45 AM GMT, Frédéric Mahé wrote:
> The RTL8852BS is a Wi-Fi 6 + Bluetooth 5.2 chip with Wi-Fi on SDIO
> and Bluetooth on UART (H5). Its Bluetooth part works with the
> RTL8822CS driver data, so use realtek,rtl8822cs-bt as fallback.
>
> This patch was prepared with the help of an AI assistant (Claude),
> which also ran the tests.
>
> Signed-off-by: Frédéric Mahé <frederic.mahe@cirad.fr>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
> Reviewed-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>


-- 
Troy Mitchell


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 273 bytes --]

RE: Bluetooth for the RTL8852BS on BPI-F3

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 1835 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/series/1208172/

---Test result---

Test Summary:
CheckPatch                    PASS      3.16 seconds
VerifyFixes                   PASS      0.19 seconds
VerifySignedoff               PASS      0.13 seconds
GitLint                       PASS      0.72 seconds
SubjectPrefix                 FAIL      2.07 seconds
BuildKernel                   PASS      31.26 seconds
CheckAllWarning               PASS      35.70 seconds
CheckSparse                   PASS      38.72 seconds
BuildKernel32                 PASS      31.87 seconds
CheckKernelLLVM               PASS      44.79 seconds
TestRunnerSetup               PASS      757.58 seconds
TestRunner_l2cap-tester       PASS      13.58 seconds
TestRunner_iso-tester         PASS      13.04 seconds
TestRunner_bnep-tester        PASS      3.20 seconds
TestRunner_mgmt-tester        PASS      90.32 seconds
TestRunner_rfcomm-tester      PASS      5.73 seconds
TestRunner_sco-tester         PASS      6.18 seconds
TestRunner_ioctl-tester       PASS      17.20 seconds
TestRunner_mesh-tester        PASS      7.54 seconds
TestRunner_smp-tester         PASS      7.40 seconds
TestRunner_userchan-tester    PASS      4.28 seconds
TestRunner_6lowpan-tester     PASS      4.58 seconds
IncrementalBuild              PASS      30.54 seconds

Details
##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix
Output:
"Bluetooth: " prefix is not specified in the subject
"Bluetooth: " prefix is not specified in the subject


https://github.com/bluez/bluetooth-next/pull/1110

---
Regards,
Linux Bluetooth

[PATCH v2 2/2] riscv: dts: spacemit: enable Bluetooth on BPI-F3

[Frédéric Mahé]

The BPI-F3 has an RTL8852BS module whose Bluetooth part is on UART2,
with hardware flow control. GPIO 63 powers Bluetooth on and GPIO 64
is the device wake line.

The firmware config switches the UART to 1.5 Mbaud, so take the UART2
clock from slow_uart2, set to 48 MHz.

Tested with a laptop: scan, pairing, and l2ping in both directions,
including incoming connections while the UART is runtime suspended.
An 8-hour soak (an HCI command every 20 s) showed no errors.

This patch was prepared with the help of an AI assistant (Claude),
which also ran the tests.

Signed-off-by: Frédéric Mahé <frederic.mahe@cirad.fr>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 58035d886..ed6d4b7f4 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -383,6 +383,23 @@ &uart0 {
 	status = "okay";
 };
 
+&uart2 {
+	assigned-clocks = <&syscon_apbc CLK_UART2>,
+			  <&syscon_mpmu CLK_SLOW_UART2>;
+	assigned-clock-parents = <&syscon_mpmu CLK_SLOW_UART2>;
+	assigned-clock-rates = <0>, <48000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_0_cfg>, <&uart2_0_cts_rts_cfg>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8852bs-bt", "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio K1_GPIO(63) GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio K1_GPIO(64) GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &usbphy2 {
 	status = "okay";
 };
-- 
2.47.3

Re: [PATCH v2 2/2] riscv: dts: spacemit: enable Bluetooth on BPI-F3

[Troy Mitchell]

[-- Attachment #1: Type: text/plain, Size: 812 bytes --]

On Wed Nov 11, 2026 at 9:45 AM GMT, Frédéric Mahé wrote:
> The BPI-F3 has an RTL8852BS module whose Bluetooth part is on UART2,
> with hardware flow control. GPIO 63 powers Bluetooth on and GPIO 64
> is the device wake line.
>
> The firmware config switches the UART to 1.5 Mbaud, so take the UART2
> clock from slow_uart2, set to 48 MHz.
>
> Tested with a laptop: scan, pairing, and l2ping in both directions,
> including incoming connections while the UART is runtime suspended.
> An 8-hour soak (an HCI command every 20 s) showed no errors.
>
> This patch was prepared with the help of an AI assistant (Claude),
> which also ran the tests.
>
> Signed-off-by: Frédéric Mahé <frederic.mahe@cirad.fr>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>


-- 
Troy Mitchell


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 273 bytes --]

Re: [PATCH v2 0/2] Bluetooth for the RTL8852BS on BPI-F3

[patchwork-bot+bluetooth]

Hello:

This series was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

On Wed, 11 Nov 2026 10:45:55 +0100 you wrote:
> The BPI-F3 (SpacemiT K1) carries an RTL8852BS Wi-Fi + Bluetooth module.
> Wi-Fi (SDIO) has no upstream driver, but Bluetooth on UART works with
> the existing hci_h5/btrtl code and linux-firmware's rtl8852bs files.
> 
> Patch 1 documents the compatible, with rtl8822cs-bt as fallback, so no
> driver change is needed. Patch 2 enables it on the BPI-F3.
> 
> [...]

Here is the summary with links:
  - [v2,1/2] dt-bindings: net: bluetooth: realtek: Add RTL8852BS
    https://git.kernel.org/bluetooth/bluetooth-next/c/c21f8cff7503
  - [v2,2/2] riscv: dts: spacemit: enable Bluetooth on BPI-F3
    https://git.kernel.org/bluetooth/bluetooth-next/c/df348a0d065c

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH v2 0/2] Bluetooth for the RTL8852BS on BPI-F3

[Troy Mitchell]

[-- Attachment #1: Type: text/plain, Size: 794 bytes --]

Hi Luiz,

On Wed, 11 Nov 2026 19:40:19 +0000, patchwork-bot+bluetooth@kernel.org wrote:
> This series was applied to bluetooth/bluetooth-next.git (master)
> by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

[...]
> Here is the summary with links:
>   - [v2,1/2] dt-bindings: net: bluetooth: realtek: Add RTL8852BS
>     https://git.kernel.org/bluetooth/bluetooth-next/c/c21f8cff7503
>   - [v2,2/2] riscv: dts: spacemit: enable Bluetooth on BPI-F3
>     https://git.kernel.org/bluetooth/bluetooth-next/c/df348a0d065c

SpacemiT DTS changes normally go through Yixun's tree to the SoC tree,
and Yixun hasn't acked this one yet. The binding patch is fine in
bluetooth-next.

Yixun, what do you think? Should Luiz drop the DTS patch and you pick it
up?

-- 
Troy Mitchell

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 273 bytes --]

Re: [PATCH v2 0/2] Bluetooth for the RTL8852BS on BPI-F3

[Yixun Lan]

Hi Luiz, Troy,

On 01:45 Thu 12 Nov     , Troy Mitchell wrote:
> Hi Luiz,
> 
> On Wed, 11 Nov 2026 19:40:19 +0000, patchwork-bot+bluetooth@kernel.org wrote:
> > This series was applied to bluetooth/bluetooth-next.git (master)
> > by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
> 
> [...]
> > Here is the summary with links:
> >   - [v2,1/2] dt-bindings: net: bluetooth: realtek: Add RTL8852BS
> >     https://git.kernel.org/bluetooth/bluetooth-next/c/c21f8cff7503
> >   - [v2,2/2] riscv: dts: spacemit: enable Bluetooth on BPI-F3
> >     https://git.kernel.org/bluetooth/bluetooth-next/c/df348a0d065c
> 
> SpacemiT DTS changes normally go through Yixun's tree to the SoC tree,
> and Yixun hasn't acked this one yet. The binding patch is fine in
> bluetooth-next.
> 
This do happen sometimes.. I agree with the split, or another solution -
I could also take patch 1/2 with bluethooth maintainer's Ack, either way
is fine by me

> Yixun, what do you think? Should Luiz drop the DTS patch and you pick it
> up?
> 
Ideally, the DT part patch [2/2] should go through SpacemiT's SoC tree,
which would avoid potential unnecessary conflicts.. besides, the DT maintainer
did complain about this thing before and request dts go through soc tree, see
https://lore.kernel.org/all/20260918-belligerent-succinct-kraken-7fa592@quoll/

-- 
Yixun Lan (dlan)

Re: [PATCH v2 0/2] Bluetooth for the RTL8852BS on BPI-F3

[Frédéric Mahé]

Hi Luiz, Yixun,

Sorry, I should have said in the cover letter which tree each patch
was meant for.

The split is fine with me: binding in bluetooth-next, DTS through
Yixun's tree. I can resend patch 2/2 on its own, rebased on the
SpacemiT tree, if that helps.

Thanks,
Frédéric

Re: [PATCH v2 0/2] Bluetooth for the RTL8852BS on BPI-F3

[Troy Mitchell]

[-- Attachment #1: Type: text/plain, Size: 544 bytes --]

Hi Frédéric,

On Thu Nov 12, 2026 at 4:56 PM +08, Frédéric Mahé wrote:
> Hi Luiz, Yixun,
>
> Sorry, I should have said in the cover letter which tree each patch
> was meant for.
>
> The split is fine with me: binding in bluetooth-next, DTS through
> Yixun's tree. I can resend patch 2/2 on its own, rebased on the
> SpacemiT tree, if that helps.
Nothing to apologize for. Which tree takes which patch is for Luiz
and Yixun to sort out, not you. No need to resend.

Thanks for your contributions :)


-- 
Troy Mitchell


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 252 bytes --]

[PATCH 1/2] dt-bindings: net: bluetooth: realtek: Add RTL8852BS

[Frédéric Mahé]

The RTL8852BS is a Wi-Fi 6 + Bluetooth 5.2 chip with Wi-Fi on SDIO
and Bluetooth on UART (H5). Its Bluetooth part works with the
RTL8822CS driver data, so use realtek,rtl8822cs-bt as fallback.

This patch was prepared with the help of an AI assistant (Claude),
which also ran the tests.

Signed-off-by: Frédéric Mahé <frederic.mahe@cirad.fr>
---
 .../bindings/net/bluetooth/realtek,bluetooth.yaml     | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/bluetooth/realtek,bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/realtek,bluetooth.yaml
index 7d567122b..ffdf13b05 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/realtek,bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/realtek,bluetooth.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/net/bluetooth/realtek,bluetooth.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS Bluetooth
+title: RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS/RTL8852BS Bluetooth
 
 maintainers:
   - Vasily Khoruzhick <anarsoul@gmail.com>
   - Alistair Francis <alistair@alistair23.me>
 
 description:
-  RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part
-  is connected over SDIO, while BT is connected over serial. It speaks
-  H5 protocol with few extra commands to upload firmware and change
+  RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS/RTL8852BS is a WiFi + BT chip.
+  WiFi part is connected over SDIO, while BT is connected over serial. It
+  speaks H5 protocol with few extra commands to upload firmware and change
   module speed.
 
 properties:
@@ -28,6 +28,9 @@ properties:
           - enum:
               - realtek,rtl8821cs-bt
           - const: realtek,rtl8723bs-bt
+      - items:
+          - const: realtek,rtl8852bs-bt
+          - const: realtek,rtl8822cs-bt
 
   device-wake-gpios:
     maxItems: 1
-- 
2.47.3

RE: Bluetooth for the RTL8852BS on BPI-F3

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 1833 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/series/1206953/

---Test result---

Test Summary:
CheckPatch                    PASS      1.06 seconds
VerifyFixes                   PASS      0.10 seconds
VerifySignedoff               PASS      0.11 seconds
GitLint                       PASS      0.51 seconds
SubjectPrefix                 FAIL      0.21 seconds
BuildKernel                   PASS      17.46 seconds
CheckAllWarning               PASS      20.54 seconds
CheckSparse                   PASS      22.27 seconds
BuildKernel32                 PASS      18.16 seconds
CheckKernelLLVM               PASS      18.28 seconds
TestRunnerSetup               PASS      420.43 seconds
TestRunner_l2cap-tester       PASS      12.59 seconds
TestRunner_iso-tester         PASS      8.89 seconds
TestRunner_bnep-tester        PASS      2.75 seconds
TestRunner_mgmt-tester        PASS      81.37 seconds
TestRunner_rfcomm-tester      PASS      3.96 seconds
TestRunner_sco-tester         PASS      4.94 seconds
TestRunner_ioctl-tester       PASS      4.21 seconds
TestRunner_mesh-tester        PASS      5.13 seconds
TestRunner_smp-tester         PASS      3.91 seconds
TestRunner_userchan-tester    PASS      2.82 seconds
TestRunner_6lowpan-tester     PASS      3.94 seconds
IncrementalBuild              PASS      19.36 seconds

Details
##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix
Output:
"Bluetooth: " prefix is not specified in the subject
"Bluetooth: " prefix is not specified in the subject


https://github.com/bluez/bluetooth-next/pull/1102

---
Regards,
Linux Bluetooth