[Bluez-users] dbus-1.pc not found

[Bluez-users] dbus-1.pc not found

[Michael Ellis]

[-- Attachment #1.1: Type: text/plain, Size: 1164 bytes --]

Apologies if this has already been discussed, but I've searched on Google
and Gmane and haven't found anything that seems to fit exactly.

Trying to configure bluez-utils-3.2 on slackware 10.1 with a 2.6.11 kernel,
I get

checking for DBUS... Package dbus-1 was not found in the pkg-config search
path.
Perhaps you should add the directory containing `dbus-1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'dbus-1' found
configure: error: dbus > 0.35 is required

Installing dbus-0.91, apparently successfully, does not cure the error.  Is
there something I needed to do other than the usual ./configure;  make;
sudo make install?  My dbus executables were installed in /usr/local/bin.

I also tried building bluez-utils-3.2 with  ./configure --disable-dbus.  No
effect, same error.  FWIW, I'm using the FCE4 desktop rather than Gnome or
KDE. I mention this because I get the impression the need for dbus is
typically associated with Desktop support.

 I very much need to get bluez-utils working for simple serial comm to an
embedded device and could care less about GUIs.  What's the most
straightforward way get past this hurdle?
Thanks,
Mike Ellis

[-- Attachment #1.2: Type: text/html, Size: 1340 bytes --]

[-- Attachment #2: Type: text/plain, Size: 373 bytes --]

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] dbus-1.pc not found

[bees]

[-- Attachment #1.1: Type: text/plain, Size: 2115 bytes --]

Hi,Mike

http://sourceforge.net/mailarchive/message.php?msg_id=20745208, you will
find more in that mail list. I also arossed the problem before, finally I
have to use the old version of bluez(utils2.25   libs2.25).  Or you can
upgrade Linux on your host.

Regards

Bees


2006/8/8, Michael Ellis <michael.f.ellis@gmail.com>:
>
> Apologies if this has already been discussed, but I've searched on Google
> and Gmane and haven't found anything that seems to fit exactly.
>
> Trying to configure bluez-utils-3.2 on slackware 10.1 with a 2.6.11kernel,  I get
>
> checking for DBUS... Package dbus-1 was not found in the pkg-config search
> path.
> Perhaps you should add the directory containing `dbus-1.pc'
> to the PKG_CONFIG_PATH environment variable
> No package 'dbus-1' found
> configure: error: dbus > 0.35 is required
>
> Installing dbus-0.91, apparently successfully, does not cure the error.
> Is there something I needed to do other than the usual ./configure;  make;
> sudo make install?  My dbus executables were installed in /usr/local/bin.
>
> I also tried building bluez-utils-3.2 with  ./configure --disable-dbus.
> No effect, same error.  FWIW, I'm using the FCE4 desktop rather than Gnome
> or KDE. I mention this because I get the impression the need for dbus is
> typically associated with Desktop support.
>
>  I very much need to get bluez-utils working for simple serial comm to an
> embedded device and could care less about GUIs.  What's the most
> straightforward way get past this hurdle?
> Thanks,
> Mike Ellis
>
>
>
>
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>
>

[-- Attachment #1.2: Type: text/html, Size: 3305 bytes --]

[-- Attachment #2: Type: text/plain, Size: 373 bytes --]

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] dbus-1.pc not found

[Marcel Holtmann]

Hi Mike,

> Apologies if this has already been discussed, but I've searched on
> Google and Gmane and haven't found anything that seems to fit exactly.
> 
> Trying to configure bluez-utils-3.2 on slackware 10.1 with a 2.6.11
> kernel,  I get  
> 
> checking for DBUS... Package dbus-1 was not found in the pkg-config
> search path.
> Perhaps you should add the directory containing `dbus-1.pc'
> to the PKG_CONFIG_PATH environment variable
> No package 'dbus-1' found
> configure: error: dbus > 0.35 is required
> 
> Installing dbus-0.91, apparently successfully, does not cure the
> error.  Is there something I needed to do other than the
> usual ./configure;  make;  sudo make install?  My dbus executables
> were installed in /usr/local/bin.
> 
> I also tried building bluez-utils-3.2 with  ./configure
> --disable-dbus.  No effect, same error.  FWIW, I'm using the FCE4
> desktop rather than Gnome or KDE. I mention this because I get the
> impression the need for dbus is typically associated with Desktop
> support.   
> 
>  I very much need to get bluez-utils working for simple serial comm to
> an embedded device and could care less about GUIs.  What's the most
> straightforward way get past this hurdle?  

run "find /usr -name 'dbus*.pc'" to find the actual pkg-config file from
your D-Bus installation.

Regards

Marcel



-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] dbus-1.pc not found

[Michael Ellis]

[-- Attachment #1.1: Type: text/plain, Size: 3712 bytes --]

Hi Marcel,

Thanks! That did the trick and it installed without error.

So, if I may be so bold as to ask a little more help :-),  I now have a
configuration that almost works.  I can plug a DBT-120 dongle into the linux
laptop and it seems to find and initialize it appropriately.  Similarly,  I
can use hcitool -inq and detect the embedded bluetooth device.  When I try
to connect with hcitool cc, I get an input/output error.  FWIW, I'm able to
connect the devices and exchange data if I plug the same dongle into a
Windows box.

Here are the outputs from the hci commands.

bash-3.00$ sudo /usr/sbin/hciconfig -a
hci0:   Type: USB
        BD Address: 00:11:95:50:30:6A ACL MTU: 192:8 SCO MTU: 64:8
        UP RUNNING
        RX bytes:767 acl:0 sco:0 events:57 errors:0
        TX bytes:513 acl:0 sco:0 commands:35 errors:0
        Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'BlueZ (0)'
        Class: 0x3e0100
        Service Classes: Networking, Rendering, Capturing
        Device Class: Computer, Uncategorized
        HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver:
0x20d
        Manufacturer: Cambridge Silicon Radio (10)


bash-3.00$ hcitool inq
Inquiring ...
        00:0C:84:00:16:51       clock offset: 0x670f    class: 0x000000

bash-3.00$ sudo hcitool cc 00:0C:84:00:16:51
Can't create connection: Input/output error

Any recommendations for troubleshooting?

Thanks for your help.
Mike

On 8/7/06, Marcel Holtmann <marcel@holtmann.org> wrote:
>
> Hi Mike,
>
> > Apologies if this has already been discussed, but I've searched on
> > Google and Gmane and haven't found anything that seems to fit exactly.
> >
> > Trying to configure bluez-utils-3.2 on slackware 10.1 with a 2.6.11
> > kernel,  I get
> >
> > checking for DBUS... Package dbus-1 was not found in the pkg-config
> > search path.
> > Perhaps you should add the directory containing `dbus-1.pc'
> > to the PKG_CONFIG_PATH environment variable
> > No package 'dbus-1' found
> > configure: error: dbus > 0.35 is required
> >
> > Installing dbus-0.91, apparently successfully, does not cure the
> > error.  Is there something I needed to do other than the
> > usual ./configure;  make;  sudo make install?  My dbus executables
> > were installed in /usr/local/bin.
> >
> > I also tried building bluez-utils-3.2 with  ./configure
> > --disable-dbus.  No effect, same error.  FWIW, I'm using the FCE4
> > desktop rather than Gnome or KDE. I mention this because I get the
> > impression the need for dbus is typically associated with Desktop
> > support.
> >
> >  I very much need to get bluez-utils working for simple serial comm to
> > an embedded device and could care less about GUIs.  What's the most
> > straightforward way get past this hurdle?
>
> run "find /usr -name 'dbus*.pc'" to find the actual pkg-config file from
> your D-Bus installation.
>
> Regards
>
> Marcel
>
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>



-- 
Michael F. Ellis
Managing Partner
Ellis & Grant, Inc.
Make Better Decisions with PeerTool!
http://www.peertools.com

[-- Attachment #1.2: Type: text/html, Size: 5444 bytes --]

[-- Attachment #2: Type: text/plain, Size: 373 bytes --]

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] dbus-1.pc not found

[Michael Ellis]

[-- Attachment #1.1: Type: text/plain, Size: 2003 bytes --]

On 8/7/06, Michael Ellis <michael.f.ellis@gmail.com> wrote:
>
> Hi Marcel,
>
> Thanks! That did the trick and it installed without error.
>
> So, if I may be so bold as to ask a little more help :-),  I now have a
> configuration that almost works.  I can plug a DBT-120 dongle into the linux
>
>

More information:
Apologies for top posting previous reply. The following is output from
hcidump following the hcitool cc command

< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:0C:84:00:16:51 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:0C:84:00:16:51
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
    bdaddr 00:0C:84:00:16:51
> HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Negative Reply (0x01|0x000c) ncmd 1
    status 0x00 bdaddr 00:0C:84:00:16:51
> HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:0C:84:00:16:51
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
    bdaddr 00:0C:84:00:16:51
> HCI Event: Command Complete (0x0e) plen 10
    PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
    status 0x00 bdaddr 00:0C:84:00:16:51
> HCI Event: Connect Complete (0x03) plen 11
    status 0x06 handle 41 bdaddr 00:0C:84:00:16:51 type ACL encrypt 0x00
    Error: PIN or Key Missing

So it looks like there's a problem with pin exchange. I'm not familiar
enough with hcidump to be sure which unit is complaining about the pin.
Both should be using 0000, for time being,  and that pin worked with the
same dongle from a Windows laptop.   My pin helper is a shell script that
simply contains:

#!/bin/sh
echo -n PIN:0000

I've tried various enabling and disable auth and encrypt and also tried
setting security to none.  In the latter case, the connection attempt times
out.

Any suggestions appreciated.

Thanks,

Mike

[-- Attachment #1.2: Type: text/html, Size: 2722 bytes --]

[-- Attachment #2: Type: text/plain, Size: 373 bytes --]

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] dbus-1.pc not found

[Michael Ellis]

[-- Attachment #1.1: Type: text/plain, Size: 445 bytes --]

On 8/8/06, Michael Ellis <michael.f.ellis@gmail.com> wrote:
>
>
>
>
> > HCI Event: Connect Complete (0x03) plen 11
>     status 0x06 handle 41 bdaddr 00:0C:84:00:16:51 type ACL encrypt 0x00
>     Error: PIN or Key Missing
>
> Found it.  In hcid.conf, I had pin-helper instead of pin_helper.  Is there
a setting that will cause hcid to log messages about invalid parameters in
the hcid.conf file? That would have saved me a couple of hours.
Mike

[-- Attachment #1.2: Type: text/html, Size: 832 bytes --]

[-- Attachment #2: Type: text/plain, Size: 373 bytes --]

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users