cross compile bluez 4.40 for ARM

cross compile bluez 4.40 for ARM

[Marcin Kijewski]

Hello,

I have been trying to cross compile bluez 4.40 on ARM processor.

I configured bluez 4.40 by writing:
$ ./configure --host=arm-linux

Configuration seems to be ok.

Then I tried to make the library:
$ make

During compilation attempt I got following error:
(...)
arm-linux-gcc -DHAVE_CONFIG_H -I. -I.. -finline-functions
-fgcse-after-reload -funswitch-loops -funroll-loops -Wall -O2
-D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -MT libsbc_la-sbc.lo -MD -MP -MF
.deps/libsbc_la-sbc.Tpo -c sbc.c  -fPIC -DPIC -o .libs/libsbc_la-sbc.o
cc1: unrecognized option `-fgcse-after-reload'
cc1: unrecognized option `-funswitch-loops'
make[2]: *** [libsbc_la-sbc.lo] Error 1
make[2]: Leaving directory `/projects/bluetooth/bluez-4.40/sbc'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/projects/bluetooth/bluez-4.40'
make: *** [all] Error 2

I tried to remove `-fgcse-after-reload' and `-funswitch-loops' from
"Makefile", "Makefile.in" and " Makefile.am" files.
In this case I got following error:
(...)
arm-linux-gcc -Wall -O2 -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -o sbcinfo
sbcinfo.o
arm-linux-gcc -DHAVE_CONFIG_H -I. -I..     -Wall -O2 -D_FORTIFY_SOURCE=2
-D_FORTIFY_SOURCE=2 -MT sbcdec.o -MD -MP -MF .deps/sbcdec.Tpo -c -o sbcdec.o
sbcdec.c
mv -f .deps/sbcdec.Tpo .deps/sbcdec.Po
/bin/sh ../libtool --tag=CC   --mode=link arm-linux-gcc  -Wall -O2
-D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2   -o sbcdec sbcdec.o libsbc.la
arm-linux-gcc -Wall -O2 -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -o sbcdec
sbcdec.o  ./.libs/libsbc.a
./.libs/libsbc.a(libsbc_la-sbc_primitives.o)(.text+0x1f20): In function
`sbc_calc_scalefactors':
: undefined reference to `__builtin_clz'
collect2: ld returned 1 exit status
make[2]: *** [sbcdec] Error 1
make[2]: Leaving directory `/projects/bluetooth/bluez-4.40/sbc'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/projects/bluetooth/bluez-4.40'
make: *** [all] Error 2

I use arm compiler version 3.2.1

Can anybody help me ?
Should I use arm-compiler newer than 3.2.1 ?

Best Regards,

Marcin Kijewski

PRUFTECHNIK Technology sp. z o.o.
ul.Sulowska 43
51-180 Wroclaw, POLAND
Tel:    +48 71 326 57 34
Fax:    +48 71 326 57 10
http://www.pruftechnik-technology.pl/

------------------------------------------------------------
This e-mail is confidential and may be legally privileged.
It is intended solely for the addressee.
Access to this e-mail by anyone else is unauthorized.
If you have received this e-mail in error, please notify
info@pruftechnik.com.pl

PRUFTECHNIK Technology cannot guarantee that any files attached to this
e-mail 
are free from viruses or any other program code that may be harmful to your
computer, 
and, as such, is not liable for any damage that may be caused as a result. 
PRUFTECHNIK Technology reserves the right to monitor all e-mail
communications through 
its networks.

Re: cross compile bluez 4.40 for ARM

[Siarhei Siamashka]

On Friday 22 May 2009 17:36:17 ext Marcin Kijewski wrote:
[...]
> mv -f .deps/sbcdec.Tpo .deps/sbcdec.Po
> /bin/sh ../libtool --tag=CC   --mode=link arm-linux-gcc  -Wall -O2
> -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2   -o sbcdec sbcdec.o libsbc.la
> arm-linux-gcc -Wall -O2 -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -o sbcdec
> sbcdec.o  ./.libs/libsbc.a
> ./.libs/libsbc.a(libsbc_la-sbc_primitives.o)(.text+0x1f20): In function
>
> `sbc_calc_scalefactors':
> : undefined reference to `__builtin_clz'

You can take a look at sbc_clz wrapper function. It uses __builtin_clz
if __GNUC__ is defined (assuming that this builtin function is supported
by gcc) and an alternative implementation otherwise. A right solution
would be to check what is the earliest version of gcc where __builtin_clz
was introduced and update this check.

> collect2: ld returned 1 exit status
> make[2]: *** [sbcdec] Error 1
> make[2]: Leaving directory `/projects/bluetooth/bluez-4.40/sbc'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/projects/bluetooth/bluez-4.40'
> make: *** [all] Error 2
>
> I use arm compiler version 3.2.1
>
> Can anybody help me ?
> Should I use arm-compiler newer than 3.2.1 ?

Newer compiler would probably solve at least part of the problems. But you
can still try to use your compiler. No guarantee that you will not encounter
further breakages using it though.

-- 
Best regards,
Siarhei Siamashka