[Bluez-users] Re: pin code

[Bluez-users] Re: pin code

[Kelvin Xu]

[-- Attachment #1: Type: text/plain, Size: 6053 bytes --]

Hi,

i am faced with the sam problems as KS H. I have also cross compiled dBus 
and Bluez Util for ARM using Scratchbox.
I followed the similar steps provided by Prabhu. However, I do not have the 
message.pid entry in /var/run but have an additional "pid" entry in 
/var/run/dbus.

And when i try to execute hcid i received the following error:
# hcid -n -f /etc/bluetooth/hcid.conf
hcid[790]: Bluetooth HCI daemon
hcid[790]: Can't open system message bus connection: Failed to connect to 
socket /var/run/dbus/system_bus_socket: Connection refused
hcid[790]: Unable to get on D-Bus

Please advice. Thank you

Regards,
Kelvin


>From: "Prabhu nath" <gprabhunath@gmail.com>
>Reply-To: BlueZ users <bluez-users@lists.sourceforge.net>
>To: "BlueZ users" <bluez-users@lists.sourceforge.net>
>Subject: [Bluez-users]Re: [Bluez-users] ¦^ÂСG Re: pin code
>Date: Sat, 27 Jan 2007 12:02:33 +0530
>
>On 1/26/07, KS H <kspam1234@yahoo.com.hk> wrote:
>>
>>Hi
>>
>>I follow the configure described. When I execut 'dbus-daemon --system'
>>it return
>>
>>Failed to start message bus: Could not get UID and GID for username
>>"messagebus"
>>What is that mean?
>
>
><prabhu> U have to create a username by name *messagebus* <prabhu>   #
>adduser -D -H messagebus
>
>and also there is no blue-hcid.conf in hcid folder
>>but I found a file call bluetooth.conf. is that the same file you said
>
>
><prabhu> Sorry it is bluez-hcid.confRegards
>
>SH
>*Prabhu nath <gprabhunath@gmail.com>* »¡¡G
>
>>  You have to cross-compile dbus-1.0, and start dbus-daemon before
>>executing hcid.
>>dbus-daemon --system
>>
>>While cross-compiling dbus-1.0 and bluez-utils, pass the following
>>parameters for the configure script.
>>--localstatedir=/var --sysconfdir=/etc
>>
>>Once you do this, by default hcid will look for hcid.conf in
>>/etc/bluetooth directory.
>>
>>
>>*Warning*. Take a backup of /etc/dbus-1 and /etc/bluetooth, because this
>>will overwrite the previous config, which was already present in ur 
>>system.
>>
>>Run make install for dbus, and u need not run make install for
>>bluez-utils. U can directly copy the hcid.conf and blue-hcid.conf to
>>/etc/bluetooth and /etc/dbus-1/system.d directory respectively.
>>
>>Now, when u start dbus-daemon --system, it will create a system_bus_socket
>>in /var/run/dbus and it will create a message.pid in /var/run/.
>>
>>next, when u start hcid, u should not get problem.
>>
>>-Prabhu
>>
>>
>>
>>
>>On 1/23/07, KS H <kspam1234@yahoo.com.hk> wrote:
>> >
>> > Dear
>> >
>> > I cross compile the bluez3.8 and try to setup the bluetooth in arm. I
>> > connect the arm with CSR BC03 with BCSP configuration. I am able to 
>>make the
>> > Bluez discoverable and try to pair bluez. however i found that there is 
>>no
>> > pin respond from Bluez. So i try to configure bluez using hcid.
>> >
>> > > hcid -n -f /etc/bluetooth/hcid.conf
>> >
>> > it return
>> >
>> > hcid[481]: Can't connect to system message bus: Failed to connect to
>> > socket /usr/local/var/run/dbus/system_bus_socket:  No such file or 
>>directory
>> >
>> > hcid[481]: Unable to get on D-Bus
>> >
>> > My question
>> > 1. where can I found the missing file and what is that used for?
>> > 2. Is there any method to repsond the pin request other than using hcid
>> >
>> > Regards
>> > SH
>> > _______________________________________
>> > YM - Â÷½u°T®§
>> > 
>>´Nºâ§A¨S¦³¤Wºô¡A§AªºªB¤Í¤´¥i¥H¯d¤U°T®§µ¹§A¡A·í§A¤Wºô®É´N¯à¥ß§Y¬Ý¨ì¡A¥ô¦ó»¡¸Ü³£ÉN¨«¥¢¡C
>> > http://messenger.yahoo.com.hk
>> >
>> >
>> > 
>>-------------------------------------------------------------------------
>> > Take Surveys. Earn Cash. Influence the Future of IT
>> > Join SourceForge.net's Techsay panel and you'll get the chance to share
>> > your
>> > opinions on IT & business topics through brief surveys - and earn cash
>> >
>> > 
>>http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>> >
>> > _______________________________________________
>> > Bluez-users mailing list
>> > Bluez-users@lists.sourceforge.net
>> > https://lists.sourceforge.net/lists/listinfo/bluez-users
>> >
>> >
>> >
>>-------------------------------------------------------------------------
>>Take Surveys. Earn Cash. Influence the Future of IT
>>Join SourceForge.net's Techsay panel and you'll get the chance to share
>>your
>>opinions on IT & business topics through brief surveys - and earn cash
>>
>>http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV_______________________________________________
>>Bluez-users mailing list
>>Bluez-users@lists.sourceforge.net
>>https://lists.sourceforge.net/lists/listinfo/bluez-users
>>
>>
>>_______________________________________
>>YM - Â÷½u°T®§
>>´Nºâ§A¨S¦³¤Wºô¡A§AªºªB¤Í¤´¥i¥H¯d¤U°T®§µ¹§A¡A·í§A¤Wºô®É´N¯à¥ß§Y¬Ý¨ì¡A¥ô¦ó»¡¸Ü³£ÉN¨«¥¢¡C
>>http://messenger.yahoo.com.hk
>>
>>-------------------------------------------------------------------------
>>Take Surveys. Earn Cash. Influence the Future of IT
>>Join SourceForge.net's Techsay panel and you'll get the chance to share
>>your
>>opinions on IT & business topics through brief surveys - and earn cash
>>http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>
>>_______________________________________________
>>Bluez-users mailing list
>>Bluez-users@lists.sourceforge.net
>>https://lists.sourceforge.net/lists/listinfo/bluez-users
>>
>>
>>


>-------------------------------------------------------------------------
>Take Surveys. Earn Cash. Influence the Future of IT
>Join SourceForge.net's Techsay panel and you'll get the chance to share 
>your
>opinions on IT & business topics through brief surveys - and earn cash
>http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV


>_______________________________________________
>Bluez-users mailing list
>Bluez-users@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-users

_________________________________________________________________
Find singles online in your area with MSN Dating and Match.com! 
http://cp.intl.match.com/eng/msn/msnsg/wbc/wbc.html



[-- Attachment #2: Type: text/plain, Size: 345 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] pin code

[Marcel Holtmann]

Hi Kelvin,

> i am faced with the sam problems as KS H. I have also cross compiled dBus 
> and Bluez Util for ARM using Scratchbox.
> I followed the similar steps provided by Prabhu. However, I do not have the 
> message.pid entry in /var/run but have an additional "pid" entry in 
> /var/run/dbus.
> 
> And when i try to execute hcid i received the following error:
> # hcid -n -f /etc/bluetooth/hcid.conf
> hcid[790]: Bluetooth HCI daemon
> hcid[790]: Can't open system message bus connection: Failed to connect to 
> socket /var/run/dbus/system_bus_socket: Connection refused
> hcid[790]: Unable to get on D-Bus
> 
> Please advice. Thank you

this can mean two things. Either the system bus is not running or the
security settings for hcid to claim the org.bluez namespace are not
correctly set.

Regards

Marcel



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] pin code

[Kelvin Xu]

Hi,

Thanks for the help.

How do i double check if my system bus is running andwhether the security 
settings are correct?

Regards,
Kelvin


>From: Marcel Holtmann <marcel@holtmann.org>
>Reply-To: BlueZ users <bluez-users@lists.sourceforge.net>
>To: BlueZ users <bluez-users@lists.sourceforge.net>
>Subject: Re: [Bluez-users] pin code
>Date: Sun, 04 Mar 2007 18:36:50 +0100
>
>Hi Kelvin,
>
> > i am faced with the sam problems as KS H. I have also cross compiled 
>dBus
> > and Bluez Util for ARM using Scratchbox.
> > I followed the similar steps provided by Prabhu. However, I do not have 
>the
> > message.pid entry in /var/run but have an additional "pid" entry in
> > /var/run/dbus.
> >
> > And when i try to execute hcid i received the following error:
> > # hcid -n -f /etc/bluetooth/hcid.conf
> > hcid[790]: Bluetooth HCI daemon
> > hcid[790]: Can't open system message bus connection: Failed to connect 
>to
> > socket /var/run/dbus/system_bus_socket: Connection refused
> > hcid[790]: Unable to get on D-Bus
> >
> > Please advice. Thank you
>
>this can mean two things. Either the system bus is not running or the
>security settings for hcid to claim the org.bluez namespace are not
>correctly set.
>
>Regards
>
>Marcel
>
>
>
>-------------------------------------------------------------------------
>Take Surveys. Earn Cash. Influence the Future of IT
>Join SourceForge.net's Techsay panel and you'll get the chance to share 
>your
>opinions on IT & business topics through brief surveys-and earn cash
>http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>_______________________________________________
>Bluez-users mailing list
>Bluez-users@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-users

_________________________________________________________________
Get an advanced look at the new version of Windows Live Messenger. 
http://get.live.com/messenger/overview


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] pin code

[Kelvin Xu]

Dear all,

I am still stuck in this problem.
I am login as 'root' in the my system. And the system-dbus is running on 
user 'messagebus'. I tried starting dbus using root as the user by modifying 
system.conf but the same problem occur.

The following are the configuration files that i am using, is there anything 
wrong?

# more bluez-hcid.conf
<!-- This configuration file specifies the required security policies
     for BlueZ hcid to work. -->

<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 
1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>

  <!-- ../system.conf have denied everything, so we just punch some holes 
-->

  <policy user="root">
    <allow own="org.bluez"/>
  </policy>

  <policy at_console="true">
    <allow send_destination="org.bluez.Adapter"/>
    <allow receive_sender="org.bluez.Adapter"/>

    <allow send_path="/org/bluez/Adapter"/>

    <allow send_destination="org.bluez.Manager"/>
    <allow receive_sender="org.bluez.Manager"/>

    <allow send_path="/org/bluez/Manager"/>

    <allow send_destination="org.bluez.Security"/>
    <allow receive_sender="org.bluez.Security"/>
  </policy>

</busconfig>

Thank you for all help provided.

Regards,
Kelvin

>From: Marcel Holtmann <marcel@holtmann.org>
>Reply-To: BlueZ users <bluez-users@lists.sourceforge.net>
>To: BlueZ users <bluez-users@lists.sourceforge.net>
>Subject: Re: [Bluez-users] pin code
>Date: Sun, 04 Mar 2007 18:36:50 +0100
>
>Hi Kelvin,
>
> > i am faced with the sam problems as KS H. I have also cross compiled 
>dBus
> > and Bluez Util for ARM using Scratchbox.
> > I followed the similar steps provided by Prabhu. However, I do not have 
>the
> > message.pid entry in /var/run but have an additional "pid" entry in
> > /var/run/dbus.
> >
> > And when i try to execute hcid i received the following error:
> > # hcid -n -f /etc/bluetooth/hcid.conf
> > hcid[790]: Bluetooth HCI daemon
> > hcid[790]: Can't open system message bus connection: Failed to connect 
>to
> > socket /var/run/dbus/system_bus_socket: Connection refused
> > hcid[790]: Unable to get on D-Bus
> >
> > Please advice. Thank you
>
>this can mean two things. Either the system bus is not running or the
>security settings for hcid to claim the org.bluez namespace are not
>correctly set.
>
>Regards
>
>Marcel
>
>
>
>-------------------------------------------------------------------------
>Take Surveys. Earn Cash. Influence the Future of IT
>Join SourceForge.net's Techsay panel and you'll get the chance to share 
>your
>opinions on IT & business topics through brief surveys-and earn cash
>http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>_______________________________________________
>Bluez-users mailing list
>Bluez-users@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-users

_________________________________________________________________
Find just what you are after with the more precise, more powerful new 
Windows Live Search. http://search.msn.com.sg/ Try it now.


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

[Bluez-users] pin code

[KS H]

[-- Attachment #1.1: Type: text/plain, Size: 860 bytes --]

Dear

I cross compile the bluez3.8 and try to setup the bluetooth in arm. I connect the arm with CSR BC03 with BCSP configuration. I am able to make the Bluez discoverable and try to pair bluez. however i found that there is no pin respond from Bluez. So i try to configure bluez using hcid.

> hcid -n -f /etc/bluetooth/hcid.conf

it return

hcid[481]: Can't connect to system message bus: Failed to connect to socket /usr/local/var/run/dbus/system_bus_socket:  No such file or directory
hcid[481]: Unable to get on D-Bus

My question
1. where can I found the missing file and what is that used for?
2. Is there any method to repsond the pin request other than using hcid

Regards
SH

 _______________________________________
 YM - 離線訊息
 就算你沒有上網，你的朋友仍可以留下訊息給你，當你上網時就能立即看到，任何說話都冇走失。
 http://messenger.yahoo.com.hk

[-- Attachment #1.2: Type: text/html, Size: 934 bytes --]

[-- Attachment #2: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] pin code

[Prabhu nath]

[-- Attachment #1.1: Type: text/plain, Size: 2429 bytes --]

You have to cross-compile dbus-1.0, and start dbus-daemon before executing
hcid.
dbus-daemon --system

While cross-compiling dbus-1.0 and bluez-utils, pass the following
parameters for the configure script.
--localstatedir=/var --sysconfdir=/etc

Once you do this, by default hcid will look for hcid.conf in /etc/bluetooth
directory.


*Warning*. Take a backup of /etc/dbus-1 and /etc/bluetooth, because this
will overwrite the previous config, which was already present in ur system.

Run make install for dbus, and u need not run make install for bluez-utils.
U can directly copy the hcid.conf and blue-hcid.conf to /etc/bluetooth and
/etc/dbus-1/system.d directory respectively.

Now, when u start dbus-daemon --system, it will create a system_bus_socket
in /var/run/dbus and it will create a message.pid in /var/run/.

next, when u start hcid, u should not get problem.

-Prabhu




On 1/23/07, KS H <kspam1234@yahoo.com.hk> wrote:
>
> Dear
>
> I cross compile the bluez3.8 and try to setup the bluetooth in arm. I
> connect the arm with CSR BC03 with BCSP configuration. I am able to make the
> Bluez discoverable and try to pair bluez. however i found that there is no
> pin respond from Bluez. So i try to configure bluez using hcid.
>
> > hcid -n -f /etc/bluetooth/hcid.conf
>
> it return
>
> hcid[481]: Can't connect to system message bus: Failed to connect to
> socket /usr/local/var/run/dbus/system_bus_socket:  No such file or directory
> hcid[481]: Unable to get on D-Bus
>
> My question
> 1. where can I found the missing file and what is that used for?
> 2. Is there any method to repsond the pin request other than using hcid
>
> Regards
> SH
>
> _______________________________________
> YM - 離線訊息
> 就算你沒有上網，你的朋友仍可以留下訊息給你，當你上網時就能立即看到，任何說話都冇走失。
> http://messenger.yahoo.com.hk
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>
>

[-- Attachment #1.2: Type: text/html, Size: 3628 bytes --]

[-- Attachment #2: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] pin code

[Sumeet VERMA]

[-- Attachment #1.1: Type: text/plain, Size: 3451 bytes --]

Hi Prabhu
I have a question. I have cross compiled dbus-0.93 and flashed the image in my hardware platform. Now when i run dbus-daemon --system it gives me an error
Failed to open connection to system message bus: Failed to connect to socket /usr/local/var/run/dbus/system_bus_socket: No such file or directory

I am a bit confused here because you write that system_bus_socket is created when dbus-daemon is started. However in my case it is expecting the socket file to be present when I start dbus-daemon.

Can you please clarify how do i solve this problem?
 

Regards,
Sumeet 

 

  _____  

From: bluez-users-bounces@lists.sourceforge.net [mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of Prabhu nath
Sent: Friday, January 26, 2007 11:15 AM
To: BlueZ users
Subject: Re: [Bluez-users] pin code


You have to cross-compile dbus-1.0, and start dbus-daemon before executing hcid. 
dbus-daemon --system
 
While cross-compiling dbus-1.0 and bluez-utils, pass the following parameters for the configure script.
--localstatedir=/var --sysconfdir=/etc
 
Once you do this, by default hcid will look for hcid.conf in /etc/bluetooth directory. 
 
 
Warning. Take a backup of /etc/dbus-1 and /etc/bluetooth, because this will overwrite the previous config, which was already present in ur system.
 
Run make install for dbus, and u need not run make install for bluez-utils. U can directly copy the hcid.conf and blue-hcid.conf to /etc/bluetooth and /etc/dbus-1/system.d directory respectively.
 
Now, when u start dbus-daemon --system, it will create a system_bus_socket in /var/run/dbus and it will create a message.pid in /var/run/. 
 
next, when u start hcid, u should not get problem.
 
-Prabhu
 


 
On 1/23/07, KS H <kspam1234@yahoo.com.hk> wrote: 

Dear

I cross compile the bluez3.8 and try to setup the bluetooth in arm. I connect the arm with CSR BC03 with BCSP configuration. I am able to make the Bluez discoverable and try to pair bluez. however i found that there is no pin respond from Bluez. So i try to configure bluez using hcid. 

> hcid -n -f /etc/bluetooth/hcid.conf

it return

hcid[481]: Can't connect to system message bus: Failed to connect to socket /usr/local/var/run/dbus/system_bus_socket:  No such file or directory 
hcid[481]: Unable to get on D-Bus

My question
1. where can I found the missing file and what is that used for?
2. Is there any method to repsond the pin request other than using hcid

Regards
SH


_______________________________________
YM - 離線訊息
就算你沒有上網，你的朋友仍可以留下訊息給你，當你上網時就能立即看到，任何說話都冇走失。
http://messenger.yahoo.com.hk  <http://messenger.yahoo.com.hk/> 


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your 
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php <http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV> &p=sourceforge&CID=DEVDEV

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users  <https://lists.sourceforge.net/lists/listinfo/bluez-users> 






[-- Attachment #1.2: Type: text/html, Size: 5670 bytes --]

[-- Attachment #2: Type: text/plain, Size: 308 bytes --]

-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users