* hci goes down
@ 2004-02-17 16:08 João Santos
2004-02-17 16:14 ` [Bluez-users] " Marcel Holtmann
0 siblings, 1 reply; 3+ messages in thread
From: João Santos @ 2004-02-17 16:08 UTC (permalink / raw)
To: marcel; +Cc: bluez-users
Hi marcel,
> > Could you tell me where i can find a good howto to install the vanilla
> > kernel.
>
>I have written a HOWTO for Debian
>
> http://www.holtmann.org/linux/kernel/debian.html
I had upgrade the kernel and installed the more recent patch, but the
results are the same.
I have done:
[root@olivia test]# rfcomm listen rfcomm0 12
Waiting for connection on channel 12
[root@olivia test]# ./scotest -r 00:60:57:15:8A:A9
scotest[15459]: Waiting for connection ...
Then in the phone i made a search for audio acessories. i found the pc and
connect to him.
[root@olivia test]# rfcomm listen rfcomm0 12
Waiting for connection on channel 12
Connection from 00:60:57:15:8A:A9 to /dev/rfcomm0
Press CTRL-C for hangup
[root@olivia test]# ./scotest -r 00:60:57:15:8A:A9
scotest[15459]: Waiting for connection ...
[root@olivia jsantos]# hcitool con
Connections:
> ACL 00:60:57:15:8A:A9 handle 40 state 1 lm MASTER AUTH ENCRYPT
Next i press a button in the phone and i start receving sco data:
[root@olivia test]# ./scotest -r 00:60:57:15:8A:A9
scotest[15459]: Waiting for connection ...
scotest[15468]: Connect from 00:60:57:15:8A:A9
scotest[15468]: Receiving ...
scotest[15468]: 720 bytes in 0.00m speed 12555.80 kb
scotest[15468]: 720 bytes in 0.00m speed 12784.09 kb
scotest[15468]: 720 bytes in 0.00m speed 14062.50 kb
scotest[15468]: 720 bytes in 0.00m speed 16351.74 kb
scotest[15468]: 720 bytes in 0.00m speed 16741.07 kb
scotest[15468]: 720 bytes in 0.00m speed 14648.44 kb
scotest[15468]: 720 bytes in 0.00m speed 13521.63 kb
scotest[15468]: 720 bytes in 0.00m speed 18503.29 kb
scotest[15468]: 720 bytes in 0.00m speed 21306.82 kb
scotest[15468]: 720 bytes in 0.00m speed 30.98 kb
scotest[15468]: 720 bytes in 0.00m speed 19531.25 kb
scotest[15468]: 720 bytes in 0.00m speed 38.06 kb
scotest[15468]: 720 bytes in 0.00m speed 76.79 kb
scotest[15468]: 720 bytes in 0.00m speed 36.59 kb
scotest[15468]: 720 bytes in 0.00m speed 76.33 kb
scotest[15468]: 720 bytes in 0.00m speed 35.93 kb
scotest[15468]: 720 bytes in 0.00m speed 79.68 kb
...
...
scotest[15468]: 720 bytes in 0.00m speed 45.65 kb
scotest[15468]: 720 bytes in 0.00m speed 72.51 kb
scotest[15468]: 720 bytes in 0.00m speed 35.63 kb
scotest[15468]: 720 bytes in 0.00m speed 72.47 kb
scotest[15468]: 720 bytes in 0.00m speed 35.58 kb
scotest[15468]: 720 bytes in 0.00m speed 72.79 kb
scotest[15468]: 720 bytes in 0.00m speed 35.51 kb
scotest[15468]: Read failed. Connection reset by peer(104)
scotest[15468]: Disconnect
[root@olivia jsantos]# hcitool con
Connections:
> SCO 00:60:57:15:8A:A9 handle 43 state 1 lm SLAVE AUTH ENCRYPT
> ACL 00:60:57:15:8A:A9 handle 40 state 1 lm MASTER AUTH ENCRYPT
HCIDump - HCI packet analyzer ver 1.5
device: hci0 snap_len: 1028 filter: 0xffffffff
>HCI Event: Connect Request(0x04) plen 10
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: Link Key Request(0x17) plen 6
>HCI Event: Role Change(0x12) plen 8
< HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
>HCI Event: Command Complete(0x0e) plen 10
>HCI Event: Connect Complete(0x03) plen 11
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
>HCI Event: Command Complete(0x0e) plen 6
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: Connection Packet Type Changed(0x1d) plen 5
>HCI Event: Max Slots Change(0x1b) plen 3
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
>ACL data: handle 0x0028 flags 0x02 dlen 17
L2CAP(d): cid 0x40 len 13 [psm 1]
SDP SS Req: tid 0xf len 0x8
pat uuid-16 0x111e
max 0xff
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(d): cid 0x40 len 10 [psm 1]
SDP SS Rsp: tid 0xf len 0x5
cur 0x0 tot 0x0
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
>ACL data: handle 0x0028 flags 0x02 dlen 17
L2CAP(d): cid 0x40 len 13 [psm 1]
SDP SS Req: tid 0x10 len 0x8
pat uuid-16 0x1108 (Headset)
max 0xff
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 1]
SDP SS Rsp: tid 0x10 len 0x9
cur 0x1 tot 0x1 hndl 0x804f6e8
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 21
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x11 len 0xc
hndl 0x804f6e8
max 0xff
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 31
L2CAP(d): cid 0x40 len 27 [psm 1]
SDP SA Rsp: tid 0x11 len 0x16
cnt 0x13
aid 0x0004 (ProtocolDescList)
uuid-16 0x0100 (L2CAP)
uuid-16 0x0003 (RFCOMM) uint 0xc
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 32772
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 1024
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
>ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 24 frame_type 0 credit_flow 15 pri 0 ack_timer 0 frame_size 324
max_retrans 0 credits 0
< ACL data: handle 0x0028 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 24 frame_type 0 credit_flow 14 pri 0 ack_timer 0 frame_size 324
max_retrans 0 credits 7
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 24 pf 1 ilen 0 fcs 0xa2
< ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 24 pf 1 ilen 0 fcs 0x69
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 24 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 24 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 24 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 24 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0028 flags 0x02 dlen 9
L2CAP(d): cid 0x40 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 24 pf 1 ilen 0 fcs 0xc8
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0041
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 9
L2CAP(d): cid 0x40 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 24 pf 1 ilen 0 fcs 0x12
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): RPN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 24 br: 7 db: 3 sb: 0 p: 0 pt: 0 xi: 0 xo: 0
rtri: 0 rtro: 0 rtci: 0 rtco: 0 xon: 17 xoff: 19 pm: 006f
< ACL data: handle 0x0028 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): RPN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 24 br: 7 db: 3 sb: 0 p: 0 pt: 0 xi: 0 xo: 0
rtri: 0 rtro: 0 rtci: 0 rtco: 0 xon: 17 xoff: 19 pm: 3f7f
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
>ACL data: handle 0x0028 flags 0x02 dlen 17
L2CAP(d): cid 0x41 len 13 [psm 1]
SDP SS Req: tid 0x12 len 0x8
pat uuid-16 0x1108 (Headset)
max 0xff
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 18
L2CAP(d): cid 0x41 len 14 [psm 1]
SDP SS Rsp: tid 0x12 len 0x9
cur 0x1 tot 0x1 hndl 0x804f6e8
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 21
L2CAP(d): cid 0x41 len 17 [psm 1]
SDP SA Req: tid 0x13 len 0xc
hndl 0x804f6e8
max 0xff
aid(s) 0x0302 ((null))
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(d): cid 0x41 len 10 [psm 1]
SDP SA Rsp: tid 0x13 len 0x5
cnt 0x2
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0041
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0041
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0041
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
>ACL data: handle 0x0028 flags 0x02 dlen 31
L2CAP(d): cid 0x41 len 27 [psm 1]
SDP SS Req: tid 0x14 len 0x16
pat uuid-128 0x5555
max 0xff
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(d): cid 0x41 len 10 [psm 1]
SDP SS Rsp: tid 0x14 len 0x5
cur 0x0 tot 0x0
cont 00
>HCI Event: Number of Completed Packets(0x13) plen 5
>ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0041
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0041
>HCI Event: Number of Completed Packets(0x13) plen 5
>HCI Event: Connect Request(0x04) plen 10
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: Connect Complete(0x03) plen 11
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
>HCI Event: Max Slots Change(0x1b) plen 3
>HCI Event: Command Status(0x0f) plen 4
>HCI Event: Connection Packet Type Changed(0x1d) plen 5
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
...
...
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>SCO data: handle 0x002b dlen 144
>HCI Event: Disconn Complete(0x05) plen 4
>SCO data: handle 0x002b dlen 144
< HCI Command: Reset(0x03|0x0003) plen 0
Receive failed: Broken pipe
After a while i receve broken pipe.
I don't no what is happen, any idea.
Sorry about the long e-mail.
Thanks
João Santos
_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Bluez-users] Re: hci goes down
2004-02-17 16:08 hci goes down João Santos
@ 2004-02-17 16:14 ` Marcel Holtmann
0 siblings, 0 replies; 3+ messages in thread
From: Marcel Holtmann @ 2004-02-17 16:14 UTC (permalink / raw)
To: João Santos; +Cc: BlueZ Mailing List
Hi Joao,
> After a while i receve broken pipe.
> I don't no what is happen, any idea.
can be a bad USB host controller (some VIA or SIS had problems) or it is
the wrong host controller driver (try the other one). And of course the
disconnect came from the phone, so maybe only listening on the RFCOMM
channel is not enough and you must fulfill all AT commands for the
Headset or Handsfree profile.
Regards
Marcel
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: hci goes down
@ 2004-03-02 16:53 João Santos
0 siblings, 0 replies; 3+ messages in thread
From: João Santos @ 2004-03-02 16:53 UTC (permalink / raw)
To: marcel; +Cc: bluez-users
Hi marcel,
>SCO data: handle 0x002c dlen 144
>SCO data: handle 0x002c dlen 144
>SCO data: handle 0x002c dlen 144
>SCO data: handle 0x002c dlen 144
>SCO data: handle 0x002c dlen 144
>SCO data: handle 0x002c dlen 144
>SCO data: handle 0x002c dlen 144
>SCO data: handle 0x002c dlen 144
>SCO data: handle 0x002c dlen 144
>SCO data: handle 0x002c dlen 144
>SCO data: handle 0x002c dlen 144
Receive failed: Broken pipe
>can be a bad USB host controller (some VIA or SIS had problems) or it is
>the wrong host controller driver (try the other one). And of course the
>disconnect came from the phone, so maybe only listening on the RFCOMM
>channel is not enough and you must fulfill all AT commands for the
>Headset or Handsfree profile.
Using the hstest i had record some speech from the phone, but after that the
hci goes down. Could the problem be caused by the software.
I couldn't send any at commands after i made a rfcomm to channel 12, because
i start receving sco data, and after a while hci goes down.
Sorry about the stupid question, but host controller driver is the hci,
right?
When i start using the bluez i remember that when i use hciconfig it appears
hci0 and hci1, but now it only appears hci0.
Thanks
João Santos
_________________________________________________________________
Fast. Reliable. Get MSN 9 Dial-up - 1 month FREE! (Limited-time Offer)
http://click.atdmt.com/AVE/go/onm00200361ave/direct/01/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-03-02 16:53 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-17 16:08 hci goes down João Santos
2004-02-17 16:14 ` [Bluez-users] " Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2004-03-02 16:53 João Santos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox