[bluez/bluez] e0d2a5: monitor: Decode Intel DDC LE extended features

[bluez/bluez] e0d2a5: monitor: Decode Intel DDC LE extended features

[Bhavani]

  Branch: refs/heads/master
  Home:   https://github.com/bluez/bluez
  Commit: e0d2a5bfe1625ab18d88b066953948c0df07b7ae
      https://github.com/bluez/bluez/commit/e0d2a5bfe1625ab18d88b066953948c0df07b7ae
  Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
  Date:   2026-07-30 (Thu, 30 Jul 2026)

  Changed paths:
    M monitor/intel.c

  Log Message:
  -----------
  monitor: Decode Intel DDC LE extended features

The Intel DDC Config Write command (0x3f|0x008b) can carry identifier
0x031f which holds the 248 octet LE extended features array, using the
same layout as LE Read All Local Features: page 0 is 8 octets followed
by 10 pages of 24 octets each.

Decode it with the existing LE feature tables instead of dumping raw
hex, and make the parameter loop stop on truncated/padded entries.

Example, setting only the SCI bits on page 1 (bits 8 and 9):

  hcitool cmd 0x3F 0x008B 0xFA 0x1F 0x03 \
      0xFF 0xF9 0x01 0x3F 0xBE 0x00 0x00 0x80 \
      0x00 0x03 0x00 0x00 ... (padding up to 248 octets)

  < HCI Command: Intel DDC Config Write (0x3f|0x008b) plen 251
          Identifier: 0x031f
          Features[0/0][8]:
          ff f9 01 3f be 00 00 80                          ...?....
            LE Encryption
            Connection Parameter Request Procedure
            ...
            LL Extended Feature Set
          Features[1/0][8]:
          00 03 00 00 00 00 00 00                          ........
            Shorter Connection Intervals
            Shorter Connection Intervals (Host Support)
          Features[1/1][8]:
          00 00 00 00 00 00 00 00                          ........
          ...


  Commit: 690c16df606733626a0a7d6bc2b83a3244d4ced1
      https://github.com/bluez/bluez/commit/690c16df606733626a0a7d6bc2b83a3244d4ced1
  Author: Naga Bhavani Akella <naga.akella@oss.qualcomm.com>
  Date:   2026-08-04 (Tue, 04 Aug 2026)

  Changed paths:
    M unit/test-rap.c

  Log Message:
  -----------
  unit/test-rap: Add PTS tests for CS

RAS/SR/SGGIT/CHA/BV-05-C - Verifies the Ranging Data Ready characteristic
exists in the GATT database with exactly the Indicate property
RAS/SR/SGGIT/CHA/BV-06-C - Same characteristic-existence/property check,
for an IUT configured to support both Indicate and Notify
RAS/SR/SGGIT/CHA/BV-07-C - Same check, for an IUT supporting Indicate
and Read on Ranging Data Ready
RAS/SR/SGGIT/CHA/BV-08-C - Same check, for an IUT supporting all three
Indicate, Notify, and Read
RAS/SR/SGGIT/CHA/BV-09-C - Verifies the Ranging Data Overwritten char
exists with exactly the Indicate
RAS/SR/SGGIT/CHA/BV-10-C - Same check, for Indicate and Notify support
RAS/SR/SGGIT/CHA/BV-11-C - Same check, for Indicate and Read support
RAS/SR/SGGIT/CHA/BV-12-C - Same check, for Indicate, Notify and Read
support

RAP/REQ/CGGIT/SER/BV-01-C - Verifies the IUT correctly discovers Ranging
service
RAP/REQ/CGGIT/CHA/BV-01-C - Verifies the IUT discovers RAS Features
characteristic and currently identifies Read property
RAP/REQ/CGGIT/CHA/BV-02-C - Verifies the IUT discovers the Real-time
Ranging Data characteristic with Notify and Indicate properties
RAP/REQ/CGGIT/CHA/BV-03-C - Verifies the IUT discovers the On-Demand
Ranging Data characteristic with Notify and Indicate properties
RAP/REQ/CGGIT/CHA/BV-04-C - Verifies the IUT discovers the RAS Control
point characteristic with Write Without Response and Indicate properties
RAP/REQ/CGGIT/CHA/BV-05-C - Verifies the IUT discovers the Ranging Data
Ready characteristic with Notify, Indicate, and Read properties
RAP/REQ/CGGIT/CHA/BV-06-C - Verifies the IUT discovers the Ranging Data
Overwritten characteristic with Notify, Indicate, and Read properties


Compare: https://github.com/bluez/bluez/compare/e45128f029ce...690c16df6067

To unsubscribe from these emails, change your notification settings at https://github.com/bluez/bluez/settings/notifications