[Bluez-users] hciconfig not able to get the device address

[Bluez-users] hciconfig not able to get the device address

[Thark frency]

[-- Attachment #1.1: Type: text/plain, Size: 589 bytes --]

Hi all ,

  I am using a USB-dongle with my linux box.I have installed
bluez-utils-3.24 and bluez-libs-3.24 .

            When I do a hciconfig the output looks like this
# hciconfig
hci0:   Type: USB
        BD Address: 00:00:00:00:00:00 ACL MTU: 377:10        SCO MTU: 16:0
        UP RUNNING PSCAN ISCAN
        RX bytes:1500 acl:9 sco:0 events:81 errors:0
        TX bytes:527 acl:8 sco:0 commands:26 errors:0

It is able to scan for other devices...and ping them.. Can somebody please
tell me why hciconfig is not able to get the device address?

Thanks in advance...
cheers,
Thark.

[-- Attachment #1.2: Type: text/html, Size: 899 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] hciconfig not able to get the device address

[Nel D]

[-- Attachment #1.1: Type: text/plain, Size: 774 bytes --]

Hi,

On Jan 16, 2008 11:31 AM, Thark frency <chemvell@gmail.com> wrote:

> Hi all ,
>
>   I am using a USB-dongle with my linux box.I have installed
> bluez-utils-3.24 and bluez-libs-3.24 .
>
>             When I do a hciconfig the output looks like this
> # hciconfig
> hci0:   Type: USB
>         BD Address: 00:00:00:00:00:00 ACL MTU: 377:10        SCO MTU: 16:0
>         UP RUNNING PSCAN ISCAN
>         RX bytes:1500 acl:9 sco:0 events:81 errors:0
>         TX bytes:527 acl:8 sco:0 commands:26 errors:0
>


Try "hciconfig hci0 up" as root and see if this helps



>
> It is able to scan for other devices...and ping them.. Can somebody
> please  tell me why hciconfig is not able to get the device address?
>
> Thanks in advance...
> cheers,
> Thark.
>

regards,
nel

[-- Attachment #1.2: Type: text/html, Size: 1493 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] hciconfig not able to get the device address

[Thark frency]

[-- Attachment #1.1: Type: text/plain, Size: 2079 bytes --]

  Hi ,

   Thanks for your quick reply.I started the hcid and did hciconfig hci0
up...but still the output of hciconfig is the same.The outputs of "hciconfig
hci0 version" and "hciconfig hci0 class" are as follows..

#hciconfig hci0 version
hci0:   Type: USB
        BD Address: 00:00:00:00:00:00 ACL MTU: 377:10 SCO MTU: 16:0
        HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x309
        Manufacturer: Broadcom Corporation (15)

#hciconfig hci0 class
hci0:   Type: USB
        BD Address: 00:00:00:00:00:00 ACL MTU: 377:10 SCO MTU: 16:0
        Class: 0x000100
        Service Classes: Unspecified
        Device Class: Computer, Uncategorized

hope these will give you a better picture of my problem...
Thanks again..
Cheers,
Thark.



On Jan 16, 2008 11:56 AM, Nel D <newatlinux@gmail.com> wrote:

> Hi,
>
> On Jan 16, 2008 11:31 AM, Thark frency <chemvell@gmail.com> wrote:
>
> > Hi all ,
> >
> >   I am using a USB-dongle with my linux box.I have installed
> > bluez-utils-3.24 and bluez-libs-3.24 .
> >
> >             When I do a hciconfig the output looks like this
> > # hciconfig
> > hci0:   Type: USB
> >         BD Address: 00:00:00:00:00:00 ACL MTU: 377:10        SCO MTU:
> > 16:0
> >         UP RUNNING PSCAN ISCAN
> >         RX bytes:1500 acl:9 sco:0 events:81 errors:0
> >         TX bytes:527 acl:8 sco:0 commands:26 errors:0
> >
>
>
> Try "hciconfig hci0 up" as root and see if this helps
>
>
>
> >
> > It is able to scan for other devices...and ping them.. Can somebody
> > please  tell me why hciconfig is not able to get the device address?
> >
> > Thanks in advance...
> > cheers,
> > Thark.
> >
>
> regards,
> nel
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>

[-- Attachment #1.2: Type: text/html, Size: 3677 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users