[Bluez-devel] rfcomm kernel 2.6.19 probs

[Bluez-devel] rfcomm kernel 2.6.19 probs

[johannes hoerhan]

I am using bluetooth to conntect my laptop and my palm for browsing the 
web to my linux workstation. Everything were working perfect untill I 
updated to kernel 2.6.19.
The devices could not connect to my workstation anymore - got a timeout 
error. Currently I am running:
Workstation:
gentoo-2006.1,
kernel 2.6.19-r2
bluez-libs 2.25
bluez-utils 2.25-r1

In my workstation's log I found:
kernel message: rfcomm_tty_ioctl: TIOCGSERIAL is not supported.
and the /dev/rfcommX device is not created.

For troubleshooting I had a look at you patch 2.6.18-mh8 and found out 
that this patches tty.c. I found out that "reversing" the patch at

net/bluetooth/rfcomm/tty.c
In function:
    static struct device *rfcomm_get_device(struct rfcomm_dev *dev)
    ....
    /*tty_register_device(rfcomm_tty_driver, dev->id, 
rfcomm_get_device(dev));*/
    tty_register_device(rfcomm_tty_driver, dev->id, NULL);

is enough to get everything working again.

So my questions: is this a bug or do I have to change my setup? Is there 
any other solution than patching the file each time updating the kernel?

regards,
  johoe

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] rfcomm kernel 2.6.19 probs

[Marcel Holtmann]

Hi Johannes,

> I am using bluetooth to conntect my laptop and my palm for browsing the 
> web to my linux workstation. Everything were working perfect untill I 
> updated to kernel 2.6.19.
> The devices could not connect to my workstation anymore - got a timeout 
> error. Currently I am running:
> Workstation:
> gentoo-2006.1,
> kernel 2.6.19-r2
> bluez-libs 2.25
> bluez-utils 2.25-r1
> 
> In my workstation's log I found:
> kernel message: rfcomm_tty_ioctl: TIOCGSERIAL is not supported.
> and the /dev/rfcommX device is not created.
> 
> For troubleshooting I had a look at you patch 2.6.18-mh8 and found out 
> that this patches tty.c. I found out that "reversing" the patch at
> 
> net/bluetooth/rfcomm/tty.c
> In function:
>     static struct device *rfcomm_get_device(struct rfcomm_dev *dev)
>     ....
>     /*tty_register_device(rfcomm_tty_driver, dev->id, 
> rfcomm_get_device(dev));*/
>     tty_register_device(rfcomm_tty_driver, dev->id, NULL);
> 
> is enough to get everything working again.
> 
> So my questions: is this a bug or do I have to change my setup? Is there 
> any other solution than patching the file each time updating the kernel?

my guess is that your udev version is too old, because everything works
fine for me.

Regards

Marcel



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] rfcomm kernel 2.6.19 probs

[Markus Uhr]

Marcel Holtmann <marcel <at> holtmann.org> writes:

> 
> Hi Johannes,
> 
> > I am using bluetooth to conntect my laptop and my palm for browsing the 
> > web to my linux workstation. Everything were working perfect untill I 
> > updated to kernel 2.6.19.
> > The devices could not connect to my workstation anymore - got a timeout 
> > error. Currently I am running:
> > Workstation:
> > gentoo-2006.1,
> > kernel 2.6.19-r2
> > bluez-libs 2.25
> > bluez-utils 2.25-r1
> > 
> > In my workstation's log I found:
> > kernel message: rfcomm_tty_ioctl: TIOCGSERIAL is not supported.
> > and the /dev/rfcommX device is not created.
> > 
> > For troubleshooting I had a look at you patch 2.6.18-mh8 and found out 
> > that this patches tty.c. I found out that "reversing" the patch at
> > 
> > net/bluetooth/rfcomm/tty.c
> > In function:
> >     static struct device *rfcomm_get_device(struct rfcomm_dev *dev)
> >     ....
> >     /*tty_register_device(rfcomm_tty_driver, dev->id, 
> > rfcomm_get_device(dev));*/
> >     tty_register_device(rfcomm_tty_driver, dev->id, NULL);
> > 
> > is enough to get everything working again.
> > 
> > So my questions: is this a bug or do I have to change my setup? Is there 
> > any other solution than patching the file each time updating the kernel?
> 
> my guess is that your udev version is too old, because everything works
> fine for me.
> 

Hello

I'm observing the same (or a similar) problem. I'm using the same software
versions as Johannes and udev-103. When I do an udevmonitor, I get the following
output when I dial in:

UEVENT[1166035369.025781]
add@/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/hci0/acl0016CB124BAF
UDEV  [1166035369.128570]
add@/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/hci0/acl0016CB124BAF
UEVENT[1166035370.486542] add@/class/tty/rfcomm0
UDEV  [1166035370.595947] add@/class/tty/rfcomm0
UEVENT[1166035370.611817] remove@/class/tty/rfcomm0
UDEV  [1166035370.798743] remove@/class/tty/rfcomm0
UEVENT[1166035394.691062]
remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/hci0/acl0016CB124BAF
UDEV  [1166035394.709361]
remove@/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/hci0/acl0016CB124BAF 


Every fifth or so attempt succeeds in creating a ppp connection:

UEVENT[1166035407.563758]
add@/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/hci0/acl0016CB124BAF
UDEV  [1166035407.627811]
add@/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/hci0/acl0016CB124BAF
UEVENT[1166035409.038378] add@/class/tty/rfcomm0
UDEV  [1166035409.071071] add@/class/tty/rfcomm0
UEVENT[1166035409.165296] add@/class/net/ppp0
UDEV  [1166035409.196920] add@/class/net/ppp0


With a kernel <=2.6.18 every attempt succeeds.

Regards,
Makrus Uhr


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] rfcomm kernel 2.6.19 probs

[Johannes Hoerhan]

Hi, I am also using udev 103 - I did not check the udev events. With my 
patch everything is working great now. If the information is needed I 
will monitor udev with the non working version of tty.c.

  joho

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel