public inbox for linux-bluetooth@vger.kernel.org
 help / color / mirror / Atom feed
* [Bluez-users] scotest problem
@ 2008-07-03  2:56 Jui-Hao Chiang
  2008-07-03 17:53 ` Jui-Hao Chiang
  0 siblings, 1 reply; 2+ messages in thread
From: Jui-Hao Chiang @ 2008-07-03  2:56 UTC (permalink / raw)
  To: bluez-users

Hi, the goal of my project is to open multiple SCO connections (for voice call)
from a single USB dongle to two cell phones.
Before doing that, I first want to try scotest in bluez-utils between two USB
dongles.
I am now trying to run Linux 2.6.23 with the following patches
(1) sco-flowcontrol
http://bluetooth-alsa.cvs.sourceforge.net/bluetooth-alsa/plugz/patches/sco-flowcontrol-v4.3.diff?view=log
(2) alternate setting patch
http://thread.gmane.org/gmane.linux.bluez.devel/12893/focus=12903

Does anyone have some experience for these two patches and scotest?
What kernel, hardware, and bluez-utils are you using?
Just want to know if anyone have done this before.

best regards,
Jui-Hao


-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [Bluez-users] scotest problem
  2008-07-03  2:56 [Bluez-users] scotest problem Jui-Hao Chiang
@ 2008-07-03 17:53 ` Jui-Hao Chiang
  0 siblings, 0 replies; 2+ messages in thread
From: Jui-Hao Chiang @ 2008-07-03 17:53 UTC (permalink / raw)
  To: bluez-users

I just tried to install Ubuntu 7.10 (linux 2.6.22) 
And the scotest works between two PCs (each with a usb dongle on it)
After that, I rebuild with the patched kernel 2.6.23 in an old way
(make all modules_install install;  mkinitramfs /boot/initrd-2.6.23 2.6.23)
But the thing becomes worse that "hcitool -i hci0 scan" can't see anything.
There are some error message in the dmesg
hci_usb_isoc_rx_submit: hci0 isoc rx submit failed urb ee84b414 err -90

Actually I have also tested the patched kernel in Ubuntu 6.06, and it works in a
half way.
(The the client can send and receive packet while the server just halt on
"Receiving..")
What could be the reason? is there any better way to try this?
Hope someone can share the experience.

Really really need help


-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2008-07-03 17:53 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-03  2:56 [Bluez-users] scotest problem Jui-Hao Chiang
2008-07-03 17:53 ` Jui-Hao Chiang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox