* Re: [PATCH 2/9] Bluetooth: Change default ERTM retransmit timeout.
From: Gustavo F. Padovan @ 2010-08-05 3:29 UTC (permalink / raw)
To: Mat Martineau; +Cc: linux-bluetooth, marcel, rshaffer, linux-arm-msm
In-Reply-To: <1280962146-22604-3-git-send-email-mathewm@codeaurora.org>
Hi Mat,
* Mat Martineau <mathewm@codeaurora.org> [2010-08-04 15:48:59 -0700]:
> The L2CAP spec requires that the ERTM retransmit timeout be at least 2
> seconds for BR/EDR connections.
>
> Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
> ---
> include/net/bluetooth/l2cap.h | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
> index 636724b..16e412f 100644
> --- a/include/net/bluetooth/l2cap.h
> +++ b/include/net/bluetooth/l2cap.h
> @@ -33,7 +33,7 @@
> #define L2CAP_DEFAULT_FLUSH_TO 0xffff
> #define L2CAP_DEFAULT_TX_WINDOW 63
> #define L2CAP_DEFAULT_MAX_TX 3
> -#define L2CAP_DEFAULT_RETRANS_TO 1000 /* 1 second */
> +#define L2CAP_DEFAULT_RETRANS_TO 2000 /* 2 seconds */
> #define L2CAP_DEFAULT_MONITOR_TO 12000 /* 12 seconds */
> #define L2CAP_DEFAULT_MAX_PDU_SIZE 672
> #define L2CAP_DEFAULT_ACK_TO 200
The spec says that a 2 seconds retransmission timeout shall be used
after a move channel operation in a BR/EDR radio. (section 8.6.2.3)
For a normal ACL connection the default value is 1 second(section
8.6.2.1), so I prefer to keep L2CAP_DEFAULT_RETRANS_TO set to 1000.
--
Gustavo F. Padovan
http://padovan.org
^ permalink raw reply
* [PATCH 7/7] Add service UUIDs from EIR to device properties in "Device Found" signal.
From: Inga Stotland @ 2010-08-04 23:00 UTC (permalink / raw)
To: linux-bluetooth; +Cc: rshaffer, johan.hedberg, marcel, Inga Stotland
In-Reply-To: <1280962831-18147-1-git-send-email-ingas@codeaurora.org>
---
src/adapter.c | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
src/adapter.h | 4 +-
src/dbus-hci.c | 6 ++--
3 files changed, 102 insertions(+), 8 deletions(-)
diff --git a/src/adapter.c b/src/adapter.c
index c142a4a..d191014 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -2749,8 +2749,94 @@ static void emit_device_found(const char *path, const char *address,
g_dbus_send_message(connection, signal);
}
+static char **get_eir_uuids(uint8_t *eir_data, size_t *uuid_count)
+{
+ uint8_t len = 0;
+ char **uuids = NULL;
+ size_t total = 0;
+ size_t uuid16_count = 0;
+ size_t uuid32_count = 0;
+ size_t uuid128_count = 0;
+ uint8_t *uuid16;
+ uint8_t *uuid32;
+ uint8_t *uuid128;
+ uuid_t service;
+ int i;
+
+ while (len < EIR_DATA_LENGTH) {
+ uint8_t type = eir_data[1];
+ uint8_t field_len = eir_data[0];
+
+ switch (type) {
+ case EIR_UUID16_SOME:
+ case EIR_UUID16_ALL:
+ uuid16_count = field_len / 2;
+ uuid16 = &eir_data[2];
+ break;
+ case EIR_UUID32_SOME:
+ case EIR_UUID32_ALL:
+ uuid32_count = field_len / 4;
+ uuid32 = &eir_data[2];
+ break;
+ case EIR_UUID128_SOME:
+ case EIR_UUID128_ALL:
+ uuid128_count = field_len / 16;
+ uuid128 = &eir_data[2];
+ break;
+ }
+
+ len += field_len + 1;
+ eir_data += field_len + 1;
+ }
+
+ total = uuid16_count + uuid32_count + uuid128_count;
+ *uuid_count = total;
+
+ if (!total)
+ return NULL;
+
+ uuids = g_new0(char *, total + 1);
+
+ /* Generate uuids in SDP format (EIR data is Little Endian) */
+ service.type = SDP_UUID16;
+ for (i = 0; i < uuid16_count; i++) {
+ uint16_t val16 = uuid16[1];
+
+ val16 = (val16 << 8) + uuid16[0];
+ service.value.uuid16 = val16;
+ uuids[i] = bt_uuid2string(&service);
+ uuid16 += 2;
+ }
+
+ service.type = SDP_UUID32;
+ for (i = uuid16_count; i < uuid32_count + uuid16_count; i++) {
+ uint32_t val32 = uuid32[3];
+ int k;
+
+ for (k = 2; k >= 0; k--)
+ val32 = (val32 << 8) + uuid32[k];
+
+ service.value.uuid32 = val32;
+ uuids[i] = bt_uuid2string(&service);
+ uuid32 += 4;
+ }
+
+ service.type = SDP_UUID128;
+ for (i = uuid32_count + uuid16_count; i < total; i++) {
+ int k;
+
+ for (k = 0; k < 16; k++)
+ service.value.uuid128.data[k] = uuid128[16 - k - 1];
+
+ uuids[i] = bt_uuid2string(&service);
+ uuid128 += 16;
+ }
+
+ return uuids;
+}
+
void adapter_emit_device_found(struct btd_adapter *adapter,
- struct remote_dev_info *dev)
+ struct remote_dev_info *dev, uint8_t *eir_data)
{
struct btd_device *device;
char peer_addr[18], local_addr[18];
@@ -2758,6 +2844,8 @@ void adapter_emit_device_found(struct btd_adapter *adapter,
dbus_bool_t paired = FALSE;
dbus_int16_t rssi = dev->rssi;
char *alias;
+ char **uuids = NULL;
+ size_t uuid_count = 0;
ba2str(&dev->bdaddr, peer_addr);
ba2str(&adapter->bdaddr, local_addr);
@@ -2777,6 +2865,10 @@ void adapter_emit_device_found(struct btd_adapter *adapter,
} else
alias = g_strdup(dev->alias);
+ /* Extract UUIDs from extended inquiry response if any*/
+ if (eir_data != NULL)
+ uuids = get_eir_uuids(eir_data, &uuid_count);
+
emit_device_found(adapter->path, paddr,
"Address", DBUS_TYPE_STRING, &paddr,
"Class", DBUS_TYPE_UINT32, &dev->class,
@@ -2786,15 +2878,17 @@ void adapter_emit_device_found(struct btd_adapter *adapter,
"Alias", DBUS_TYPE_STRING, &alias,
"LegacyPairing", DBUS_TYPE_BOOLEAN, &dev->legacy,
"Paired", DBUS_TYPE_BOOLEAN, &paired,
+ "UUIDs", DBUS_TYPE_ARRAY, &uuids, uuid_count,
NULL);
g_free(alias);
+ g_strfreev(uuids);
}
void adapter_update_found_devices(struct btd_adapter *adapter, bdaddr_t *bdaddr,
int8_t rssi, uint32_t class, const char *name,
const char *alias, gboolean legacy,
- name_status_t name_status)
+ name_status_t name_status, uint8_t *eir_data)
{
struct remote_dev_info *dev, match;
@@ -2833,7 +2927,7 @@ done:
adapter->found_devices = g_slist_sort(adapter->found_devices,
(GCompareFunc) dev_rssi_cmp);
- adapter_emit_device_found(adapter, dev);
+ adapter_emit_device_found(adapter, dev, eir_data);
}
int adapter_remove_found_device(struct btd_adapter *adapter, bdaddr_t *bdaddr)
diff --git a/src/adapter.h b/src/adapter.h
index 8226514..a7eca0e 100644
--- a/src/adapter.h
+++ b/src/adapter.h
@@ -113,10 +113,10 @@ struct remote_dev_info *adapter_search_found_devices(struct btd_adapter *adapter
void adapter_update_found_devices(struct btd_adapter *adapter, bdaddr_t *bdaddr,
int8_t rssi, uint32_t class, const char *name,
const char *alias, gboolean legacy,
- name_status_t name_status);
+ name_status_t name_status, uint8_t *eir_data);
int adapter_remove_found_device(struct btd_adapter *adapter, bdaddr_t *bdaddr);
void adapter_emit_device_found(struct btd_adapter *adapter,
- struct remote_dev_info *dev);
+ struct remote_dev_info *dev, uint8_t *eir_data);
void adapter_update_oor_devices(struct btd_adapter *adapter);
void adapter_mode_changed(struct btd_adapter *adapter, uint8_t scan_mode);
void adapter_setname_complete(bdaddr_t *local, uint8_t status);
diff --git a/src/dbus-hci.c b/src/dbus-hci.c
index b83506f..6d27caa 100644
--- a/src/dbus-hci.c
+++ b/src/dbus-hci.c
@@ -515,7 +515,7 @@ void hcid_dbus_inquiry_result(bdaddr_t *local, bdaddr_t *peer, uint32_t class,
if (dev) {
adapter_update_found_devices(adapter, peer, rssi, class,
NULL, NULL, dev->legacy,
- NAME_NOT_REQUIRED);
+ NAME_NOT_REQUIRED, data);
return;
}
@@ -566,7 +566,7 @@ void hcid_dbus_inquiry_result(bdaddr_t *local, bdaddr_t *peer, uint32_t class,
/* add in the list to track name sent/pending */
adapter_update_found_devices(adapter, peer, rssi, class, name, alias,
- legacy, name_status);
+ legacy, name_status, data);
g_free(name);
g_free(alias);
@@ -642,7 +642,7 @@ void hcid_dbus_remote_name(bdaddr_t *local, bdaddr_t *peer, uint8_t status,
if (dev_info) {
g_free(dev_info->name);
dev_info->name = g_strdup(name);
- adapter_emit_device_found(adapter, dev_info);
+ adapter_emit_device_found(adapter, dev_info, NULL);
}
if (device)
--
1.7.2
--
Inga Stotland
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply related
* [PATCH 6/7] Handle arrays in device properties dictionary.
From: Inga Stotland @ 2010-08-04 23:00 UTC (permalink / raw)
To: linux-bluetooth; +Cc: rshaffer, johan.hedberg, marcel, Inga Stotland
In-Reply-To: <1280962831-18147-1-git-send-email-ingas@codeaurora.org>
---
src/adapter.c | 9 ++++++++-
1 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/src/adapter.c b/src/adapter.c
index b735bdd..c142a4a 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -2700,6 +2700,7 @@ static void append_dict_valist(DBusMessageIter *iter,
DBusMessageIter dict;
const char *key;
int type;
+ int n_elements;
void *val;
dbus_message_iter_open_container(iter, DBUS_TYPE_ARRAY,
@@ -2711,7 +2712,13 @@ static void append_dict_valist(DBusMessageIter *iter,
while (key) {
type = va_arg(var_args, int);
val = va_arg(var_args, void *);
- dict_append_entry(&dict, key, type, val);
+ if (type == DBUS_TYPE_ARRAY) {
+ n_elements = va_arg(var_args, int);
+ if (n_elements > 0)
+ dict_append_array(&dict, key, DBUS_TYPE_STRING,
+ val, n_elements);
+ } else
+ dict_append_entry(&dict, key, type, val);
key = va_arg(var_args, char *);
}
--
1.7.2
--
Inga Stotland
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply related
* [PATCH 5/7] Fix in logic to write EIR when SDP records are changed.
From: Inga Stotland @ 2010-08-04 23:00 UTC (permalink / raw)
To: linux-bluetooth; +Cc: rshaffer, johan.hedberg, marcel, Inga Stotland
In-Reply-To: <1280962831-18147-1-git-send-email-ingas@codeaurora.org>
Whenever SDP service record is added/deleted/modified check for whether
class of device needs to be updated as well. If the update is
needed, proceed as before: new EIR will be written subsequently.
If the class of device is already present, just update EIR and return.
---
src/adapter.c | 69 ++++++++++++++++++++++++++++++--------------------------
1 files changed, 37 insertions(+), 32 deletions(-)
diff --git a/src/adapter.c b/src/adapter.c
index 4615326..b735bdd 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -206,6 +206,34 @@ void clear_found_devices_list(struct btd_adapter *adapter)
adapter->found_devices = NULL;
}
+static void update_ext_inquiry_response(struct btd_adapter *adapter)
+{
+ uint8_t fec = 0, data[240];
+ struct hci_dev *dev = &adapter->dev;
+ int dd;
+
+ if (!(dev->features[6] & LMP_EXT_INQ))
+ return;
+
+ memset(data, 0, sizeof(data));
+
+ dd = hci_open_dev(adapter->dev_id);
+ if (dd < 0)
+ return;
+
+ if (dev->ssp_mode > 0)
+ create_ext_inquiry_response((char *) dev->name,
+ adapter->tx_power,
+ adapter->services, data);
+
+ if (hci_write_ext_inquiry_response(dd, fec, data,
+ HCI_REQ_TIMEOUT) < 0)
+ error("Can't write extended inquiry response: %s (%d)",
+ strerror(errno), errno);
+
+ hci_close_dev(dd);
+}
+
static int adapter_set_service_classes(struct btd_adapter *adapter,
uint8_t value)
{
@@ -216,11 +244,16 @@ static int adapter_set_service_classes(struct btd_adapter *adapter,
adapter->wanted_cod &= 0x00ffff;
adapter->wanted_cod |= (value << 16);
- /* If we already have the CoD we want or the cache is enabled or an
- * existing CoD write is in progress just bail out */
- if (adapter->current_cod == adapter->wanted_cod ||
- adapter->cache_enable || adapter->pending_cod)
+ /* If the cache is enabled or an existing CoD write is in progress
+ * just bail out */
+ if (adapter->cache_enable || adapter->pending_cod)
+ return 0;
+
+ /* If we already have the CoD we want, update EIR and return */
+ if (adapter->current_cod == adapter->wanted_cod) {
+ update_ext_inquiry_response(adapter);
return 0;
+ }
DBG("Changing service classes to 0x%06x", adapter->wanted_cod);
@@ -818,34 +851,6 @@ static DBusMessage *set_pairable_timeout(DBusConnection *conn,
return dbus_message_new_method_return(msg);
}
-static void update_ext_inquiry_response(struct btd_adapter *adapter)
-{
- uint8_t fec = 0, data[240];
- struct hci_dev *dev = &adapter->dev;
- int dd;
-
- if (!(dev->features[6] & LMP_EXT_INQ))
- return;
-
- memset(data, 0, sizeof(data));
-
- dd = hci_open_dev(adapter->dev_id);
- if (dd < 0)
- return;
-
- if (dev->ssp_mode > 0)
- create_ext_inquiry_response((char *) dev->name,
- adapter->tx_power,
- adapter->services, data);
-
- if (hci_write_ext_inquiry_response(dd, fec, data,
- HCI_REQ_TIMEOUT) < 0)
- error("Can't write extended inquiry response: %s (%d)",
- strerror(errno), errno);
-
- hci_close_dev(dd);
-}
-
void adapter_set_class_complete(bdaddr_t *bdaddr, uint8_t status)
{
uint8_t class[3];
--
1.7.2
--
Inga Stotland
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply related
* [PATCH 4/7] Support for adding UUID128 to extended inquiry response
From: Inga Stotland @ 2010-08-04 23:00 UTC (permalink / raw)
To: linux-bluetooth; +Cc: rshaffer, johan.hedberg, marcel, Inga Stotland
In-Reply-To: <1280962831-18147-1-git-send-email-ingas@codeaurora.org>
---
src/sdpd-service.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 63 insertions(+), 0 deletions(-)
diff --git a/src/sdpd-service.c b/src/sdpd-service.c
index 5c56e2d..26ab9a5 100644
--- a/src/sdpd-service.c
+++ b/src/sdpd-service.c
@@ -49,6 +49,8 @@
#include "manager.h"
#include "adapter.h"
+#define SIZEOF_UUID128 16
+
static sdp_record_t *server = NULL;
static uint16_t did_vendor = 0x0000;
@@ -174,6 +176,63 @@ static void update_svclass_list(const bdaddr_t *src)
}
+static void eir_generate_uuid128(sdp_list_t *list,
+ uint8_t *ptr, uint16_t *eir_len)
+{
+ int i, k, index = 0;
+ uint16_t len = *eir_len;
+ uint8_t *uuid128;
+ gboolean truncated = FALSE;
+
+ /* Store UUIDs in place, skip 2 bytes to write type and length later */
+ uuid128 = ptr + 2;
+
+ for (; list; list = list->next) {
+ sdp_record_t *rec = (sdp_record_t *) list->data;
+ uint8_t *uuid128_data = rec->svclass.value.uuid128.data;
+
+ if (rec->svclass.type != SDP_UUID128)
+ continue;
+
+ /* Stop if not enough space to put next UUID128 */
+ if ((len + 2 + SIZEOF_UUID128) > EIR_DATA_LENGTH) {
+ truncated = TRUE;
+ break;
+ }
+
+ /* Check for duplicates, EIR data is Little Endian */
+ for (i = 0; i < index; i++) {
+ for (k = 0; k < SIZEOF_UUID128; k++) {
+ if (uuid128[i * SIZEOF_UUID128 + k] !=
+ uuid128_data[SIZEOF_UUID128 - k])
+ break;
+ }
+ if (k == SIZEOF_UUID128)
+ break;
+ }
+
+ if (i < index)
+ continue;
+
+ /* EIR data is Little Endian */
+ for (k = 0; k < SIZEOF_UUID128; k++)
+ uuid128[index * SIZEOF_UUID128 + k] =
+ uuid128_data[SIZEOF_UUID128 - 1 - k];
+
+ len += SIZEOF_UUID128;
+ index++;
+ }
+
+ if (index > 0 || truncated) {
+ /* EIR Data length */
+ ptr[0] = (index * SIZEOF_UUID128) + 1;
+ /* EIR Data type */
+ ptr[1] = truncated ? EIR_UUID128_SOME : EIR_UUID128_ALL;
+ len += 2;
+ *eir_len = len;
+ }
+}
+
void create_ext_inquiry_response(const char *name,
int8_t tx_power, sdp_list_t *services,
uint8_t *data)
@@ -271,6 +330,10 @@ void create_ext_inquiry_response(const char *name,
*ptr++ = (uuid16[i] & 0xff00) >> 8;
}
}
+
+ /* Group all UUID128 types */
+ if (eir_len <= EIR_DATA_LENGTH - 2)
+ eir_generate_uuid128(services, ptr, &eir_len);
}
void register_public_browse_group(void)
--
1.7.2
--
Inga Stotland
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply related
* [PATCH 3/7] Clean up code that generates extended inquiry response.
From: Inga Stotland @ 2010-08-04 23:00 UTC (permalink / raw)
To: linux-bluetooth; +Cc: rshaffer, johan.hedberg, marcel, Inga Stotland
In-Reply-To: <1280962831-18147-1-git-send-email-ingas@codeaurora.org>
---
src/sdpd-service.c | 44 +++++++++++++++++++++++++++++---------------
1 files changed, 29 insertions(+), 15 deletions(-)
diff --git a/src/sdpd-service.c b/src/sdpd-service.c
index 35e333d..5c56e2d 100644
--- a/src/sdpd-service.c
+++ b/src/sdpd-service.c
@@ -180,35 +180,41 @@ void create_ext_inquiry_response(const char *name,
{
sdp_list_t *list = services;
uint8_t *ptr = data;
- uint16_t uuid[24];
+ uint16_t eir_len = 0;
+ uint16_t uuid16[EIR_DATA_LENGTH / 2];
int i, index = 0;
+ gboolean truncated = FALSE;
if (name) {
int len = strlen(name);
+ /* EIR Data type */
if (len > 48) {
len = 48;
- ptr[1] = 0x08;
+ ptr[1] = EIR_NAME_SHORT;
} else
- ptr[1] = 0x09;
+ ptr[1] = EIR_NAME_COMPLETE;
+ /* EIR Data length */
ptr[0] = len + 1;
memcpy(ptr + 2, name, len);
- ptr += len + 2;
+ eir_len += (len + 2);
+ ptr += (len + 2);
}
if (tx_power != 0) {
*ptr++ = 2;
- *ptr++ = 0x0a;
+ *ptr++ = EIR_TX_POWER;
*ptr++ = (uint8_t) tx_power;
+ eir_len += 3;
}
if (did_vendor != 0x0000) {
uint16_t source = 0x0002;
*ptr++ = 9;
- *ptr++ = 0x10;
+ *ptr++ = EIR_DEVICE_ID;
*ptr++ = (source & 0x00ff);
*ptr++ = (source & 0xff00) >> 8;
*ptr++ = (did_vendor & 0x00ff);
@@ -217,10 +223,10 @@ void create_ext_inquiry_response(const char *name,
*ptr++ = (did_product & 0xff00) >> 8;
*ptr++ = (did_version & 0x00ff);
*ptr++ = (did_version & 0xff00) >> 8;
+ eir_len += 10;
}
- ptr[1] = 0x03;
-
+ /* Group all UUID16 types */
for (; list; list = list->next) {
sdp_record_t *rec = (sdp_record_t *) list->data;
@@ -233,28 +239,36 @@ void create_ext_inquiry_response(const char *name,
if (rec->svclass.value.uuid16 == PNP_INFO_SVCLASS_ID)
continue;
- if (index > 23) {
- ptr[1] = 0x02;
+ /* Stop if not enough space to put next UUID16 */
+ if ((eir_len + 2 + sizeof(uint16_t)) > EIR_DATA_LENGTH) {
+ truncated = TRUE;
break;
}
+ /* Check for duplicates */
for (i = 0; i < index; i++)
- if (uuid[i] == rec->svclass.value.uuid16)
+ if (uuid16[i] == rec->svclass.value.uuid16)
break;
if (i < index)
continue;
- uuid[index++] = rec->svclass.value.uuid16;
+ uuid16[index++] = rec->svclass.value.uuid16;
+ eir_len += sizeof(uint16_t);
}
if (index > 0) {
- ptr[0] = (index * 2) + 1;
+ /* EIR Data length */
+ ptr[0] = (index * sizeof(uint16_t)) + 1;
+ /* EIR Data type */
+ ptr[1] = truncated ? EIR_UUID16_SOME : EIR_UUID16_ALL;
+
ptr += 2;
+ eir_len += 2;
for (i = 0; i < index; i++) {
- *ptr++ = (uuid[i] & 0x00ff);
- *ptr++ = (uuid[i] & 0xff00) >> 8;
+ *ptr++ = (uuid16[i] & 0x00ff);
+ *ptr++ = (uuid16[i] & 0xff00) >> 8;
}
}
}
--
1.7.2
--
Inga Stotland
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply related
* [PATCH 2/7] Minor fix when skipping duplicate UUID16 from EIR.
From: Inga Stotland @ 2010-08-04 23:00 UTC (permalink / raw)
To: linux-bluetooth; +Cc: rshaffer, johan.hedberg, marcel, Inga Stotland
In-Reply-To: <1280962831-18147-1-git-send-email-ingas@codeaurora.org>
---
src/sdpd-service.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/src/sdpd-service.c b/src/sdpd-service.c
index cdbb4f4..35e333d 100644
--- a/src/sdpd-service.c
+++ b/src/sdpd-service.c
@@ -242,7 +242,7 @@ void create_ext_inquiry_response(const char *name,
if (uuid[i] == rec->svclass.value.uuid16)
break;
- if (i == index - 1)
+ if (i < index)
continue;
uuid[index++] = rec->svclass.value.uuid16;
--
1.7.2
--
Inga Stotland
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply related
* [PATCH 1/7] Spec constants for Extended Inquiry Response field types
From: Inga Stotland @ 2010-08-04 23:00 UTC (permalink / raw)
To: linux-bluetooth; +Cc: rshaffer, johan.hedberg, marcel, Inga Stotland
In-Reply-To: <1280962831-18147-1-git-send-email-ingas@codeaurora.org>
---
src/sdpd.h | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/src/sdpd.h b/src/sdpd.h
index e93b0b6..5bab869 100644
--- a/src/sdpd.h
+++ b/src/sdpd.h
@@ -34,6 +34,19 @@
#define SDPDBG(fmt...)
#endif
+#define EIR_DATA_LENGTH 240
+
+#define EIR_UUID16_SOME 0x02 /* 16-bit UUID, more available */
+#define EIR_UUID16_ALL 0x03 /* 16-bit UUID, all listed */
+#define EIR_UUID32_SOME 0x04 /* 32-bit UUID, more available */
+#define EIR_UUID32_ALL 0x05 /* 32-bit UUID, all listed */
+#define EIR_UUID128_SOME 0x06 /* 128-bit UUID, more available */
+#define EIR_UUID128_ALL 0x07 /* 128-bit UUID, all listed */
+#define EIR_NAME_SHORT 0x08 /* shortened local name */
+#define EIR_NAME_COMPLETE 0x09 /* complete local name */
+#define EIR_TX_POWER 0x0A /* transmit power level */
+#define EIR_DEVICE_ID 0x10 /* device ID */
+
typedef struct request {
bdaddr_t device;
bdaddr_t bdaddr;
--
1.7.2
--
Inga Stotland
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply related
* [PATCH v8 0/7] Enhanced support for extended inquiry response
From: Inga Stotland @ 2010-08-04 23:00 UTC (permalink / raw)
To: linux-bluetooth; +Cc: rshaffer, johan.hedberg, marcel
EIR needs to be updated whenever local SDP record database changes.
Previously, when an SDP record was added/removed/updated, EIR would
be written in callback fired off HCI "Command Complete" event set off by
"Write Class Of Device" command. However, if the class of device did not
need to be updated, the EIR write was not happening either. This
implementation has been augmented to write new EIR when modification
in SDP database does not lead to updating of class of device.
Added support for UUID128 service descriptors in local EIR.
Service UUIDs are written to "device properties" dictionary when emitting
"Device Found" signal. This allows peek at available services offered by
a remote device without establishing SDP connection.
--
Inga Stotland
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply
* [PATCH 9/9] Bluetooth: Use 3-DH5 payload size for default ERTM max PDU size.
From: Mat Martineau @ 2010-08-04 22:49 UTC (permalink / raw)
To: linux-bluetooth; +Cc: marcel, gustavo, rshaffer, linux-arm-msm, Mat Martineau
In-Reply-To: <1280962146-22604-1-git-send-email-mathewm@codeaurora.org>
The previous value of 672 for L2CAP_DEFAULT_MAX_PDU_SIZE is based on
the default L2CAP MTU. That default MTU is calculated from the size
of two DH5 packets, minus ACL and L2CAP b-frame header overhead.
ERTM is used with newer basebands that typically support larger 3-DH5
packets, and i-frames and s-frames have more header overhead. With
clean RF conditions, basebands will typically attempt to use 1021-byte
3-DH5 packets for maximum throughput. Adjusting for 2 bytes of ACL
headers plus 10 bytes of worst-case L2CAP headers yields 1009 bytes
of payload.
This PDU size imposes less overhead for header bytes and gives the
baseband the option to choose 3-DH5 packets, but is small enough for
ERTM traffic to interleave well with other L2CAP or SCO data.
672-byte payloads do not allow the most efficient over-the-air
packet choice, and cannot achieve maximum throughput over BR/EDR.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
include/net/bluetooth/l2cap.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 16e412f..6c24144 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -35,7 +35,7 @@
#define L2CAP_DEFAULT_MAX_TX 3
#define L2CAP_DEFAULT_RETRANS_TO 2000 /* 2 seconds */
#define L2CAP_DEFAULT_MONITOR_TO 12000 /* 12 seconds */
-#define L2CAP_DEFAULT_MAX_PDU_SIZE 672
+#define L2CAP_DEFAULT_MAX_PDU_SIZE 1009 /* Sized for 3-DH5 packet */
#define L2CAP_DEFAULT_ACK_TO 200
#define L2CAP_LOCAL_BUSY_TRIES 12
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
^ permalink raw reply related
* [PATCH 8/9] Bluetooth: Use a stream-oriented recvmsg with SOCK_STREAM L2CAP sockets.
From: Mat Martineau @ 2010-08-04 22:49 UTC (permalink / raw)
To: linux-bluetooth; +Cc: marcel, gustavo, rshaffer, linux-arm-msm, Mat Martineau
In-Reply-To: <1280962146-22604-1-git-send-email-mathewm@codeaurora.org>
L2CAP ERTM sockets can be opened with the SOCK_STREAM socket type,
which is a mandatory request for ERTM mode.
However, these sockets still have SOCK_SEQPACKET read semantics when
bt_sock_recvmsg() is used to pull data from the receive queue. If the
application is only reading part of a frame, then the unread portion
of the frame is discarded. If the application requests more bytes
than are in the current frame, only the current frame's data is
returned.
This patch utilizes common code derived from RFCOMM's recvmsg()
function to make L2CAP SOCK_STREAM reads behave like RFCOMM reads (and
other SOCK_STREAM sockets in general). The application may read one
byte at a time from the input stream and not lose any data, and may
also read across L2CAP frame boundaries.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/l2cap.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index f0f3c7c..b9de88d 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -1956,7 +1956,10 @@ static int l2cap_sock_recvmsg(struct kiocb *iocb, struct socket *sock, struct ms
release_sock(sk);
- return bt_sock_recvmsg(iocb, sock, msg, len, flags);
+ if (sock->type == SOCK_STREAM)
+ return bt_sock_stream_recvmsg(iocb, sock, msg, len, flags);
+ else
+ return bt_sock_recvmsg(iocb, sock, msg, len, flags);
}
static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen)
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
^ permalink raw reply related
* [PATCH 7/9] Bluetooth: Use common SOCK_STREAM receive code in RFCOMM.
From: Mat Martineau @ 2010-08-04 22:49 UTC (permalink / raw)
To: linux-bluetooth; +Cc: marcel, gustavo, rshaffer, linux-arm-msm, Mat Martineau
In-Reply-To: <1280962146-22604-1-git-send-email-mathewm@codeaurora.org>
To reduce code duplication, have rfcomm_sock_recvmsg() call
bt_sock_stream_recvmsg(). The common bt_sock_stream_recvmsg()
code is nearly identical, with the RFCOMM-specific functionality
for deferred setup and connection unthrottling left in
rfcomm_sock_recvmsg().
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/rfcomm/sock.c | 104 +++----------------------------------------
1 files changed, 6 insertions(+), 98 deletions(-)
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 44a6232..4396f47 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -617,121 +617,29 @@ static int rfcomm_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
return sent;
}
-static long rfcomm_sock_data_wait(struct sock *sk, long timeo)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(sk_sleep(sk), &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (!skb_queue_empty(&sk->sk_receive_queue) ||
- sk->sk_err ||
- (sk->sk_shutdown & RCV_SHUTDOWN) ||
- signal_pending(current) ||
- !timeo)
- break;
-
- set_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
- release_sock(sk);
- timeo = schedule_timeout(timeo);
- lock_sock(sk);
- clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
- }
-
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(sk_sleep(sk), &wait);
- return timeo;
-}
-
static int rfcomm_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
struct msghdr *msg, size_t size, int flags)
{
struct sock *sk = sock->sk;
struct rfcomm_dlc *d = rfcomm_pi(sk)->dlc;
- int err = 0;
- size_t target, copied = 0;
- long timeo;
+ int len;
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
- if (flags & MSG_OOB)
- return -EOPNOTSUPP;
-
- msg->msg_namelen = 0;
-
- BT_DBG("sk %p size %zu", sk, size);
+ len = bt_sock_stream_recvmsg(iocb, sock, msg, size, flags);
lock_sock(sk);
+ if (!(flags & MSG_PEEK) && len > 0)
+ atomic_sub(len, &sk->sk_rmem_alloc);
- target = sock_rcvlowat(sk, flags & MSG_WAITALL, size);
- timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
-
- do {
- struct sk_buff *skb;
- int chunk;
-
- skb = skb_dequeue(&sk->sk_receive_queue);
- if (!skb) {
- if (copied >= target)
- break;
-
- if ((err = sock_error(sk)) != 0)
- break;
- if (sk->sk_shutdown & RCV_SHUTDOWN)
- break;
-
- err = -EAGAIN;
- if (!timeo)
- break;
-
- timeo = rfcomm_sock_data_wait(sk, timeo);
-
- if (signal_pending(current)) {
- err = sock_intr_errno(timeo);
- goto out;
- }
- continue;
- }
-
- chunk = min_t(unsigned int, skb->len, size);
- if (memcpy_toiovec(msg->msg_iov, skb->data, chunk)) {
- skb_queue_head(&sk->sk_receive_queue, skb);
- if (!copied)
- copied = -EFAULT;
- break;
- }
- copied += chunk;
- size -= chunk;
-
- sock_recv_ts_and_drops(msg, sk, skb);
-
- if (!(flags & MSG_PEEK)) {
- atomic_sub(chunk, &sk->sk_rmem_alloc);
-
- skb_pull(skb, chunk);
- if (skb->len) {
- skb_queue_head(&sk->sk_receive_queue, skb);
- break;
- }
- kfree_skb(skb);
-
- } else {
- /* put message back and return */
- skb_queue_head(&sk->sk_receive_queue, skb);
- break;
- }
- } while (size);
-
-out:
if (atomic_read(&sk->sk_rmem_alloc) <= (sk->sk_rcvbuf >> 2))
rfcomm_dlc_unthrottle(rfcomm_pi(sk)->dlc);
-
release_sock(sk);
- return copied ? : err;
+
+ return len;
}
static int rfcomm_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen)
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
^ permalink raw reply related
* [PATCH 6/9] Bluetooth: Add common code for stream-oriented recvmsg()
From: Mat Martineau @ 2010-08-04 22:49 UTC (permalink / raw)
To: linux-bluetooth; +Cc: marcel, gustavo, rshaffer, linux-arm-msm, Mat Martineau
In-Reply-To: <1280962146-22604-1-git-send-email-mathewm@codeaurora.org>
This commit adds a bt_sock_stream_recvmsg() function for use by any
Bluetooth code that uses SOCK_STREAM sockets. This code is copied
from rfcomm_sock_recvmsg() with minimal modifications to remove
RFCOMM-specific functionality and improve readability.
L2CAP (with the SOCK_STREAM socket type) and RFCOMM have common needs
when it comes to reading data. Proper stream read semantics require
that applications can read from a stream one byte at a time and not
lose any data. The RFCOMM code already operated on and pulled data
from the underlying L2CAP socket, so very few changes were required to
make the code more generic for use with non-RFCOMM data over L2CAP.
Applications that need more awareness of L2CAP frame boundaries are
still free to use SOCK_SEQPACKET sockets, and may verify that they
connection did not fall back to basic mode by calling getsockopt().
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
include/net/bluetooth/bluetooth.h | 2 +
net/bluetooth/af_bluetooth.c | 109 +++++++++++++++++++++++++++++++++++++
2 files changed, 111 insertions(+), 0 deletions(-)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 27a902d..08b6c2a 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -126,6 +126,8 @@ int bt_sock_unregister(int proto);
void bt_sock_link(struct bt_sock_list *l, struct sock *s);
void bt_sock_unlink(struct bt_sock_list *l, struct sock *s);
int bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg, size_t len, int flags);
+int bt_sock_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
+ struct msghdr *msg, size_t len, int flags);
uint bt_sock_poll(struct file * file, struct socket *sock, poll_table *wait);
int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo);
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 421c45b..77a26fe 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -265,6 +265,115 @@ int bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
}
EXPORT_SYMBOL(bt_sock_recvmsg);
+static long bt_sock_data_wait(struct sock *sk, long timeo)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ add_wait_queue(sk_sleep(sk), &wait);
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (!skb_queue_empty(&sk->sk_receive_queue))
+ break;
+
+ if (sk->sk_err || (sk->sk_shutdown & RCV_SHUTDOWN))
+ break;
+
+ if (signal_pending(current) || !timeo)
+ break;
+
+ set_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
+ release_sock(sk);
+ timeo = schedule_timeout(timeo);
+ lock_sock(sk);
+ clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
+ }
+
+ __set_current_state(TASK_RUNNING);
+ remove_wait_queue(sk_sleep(sk), &wait);
+ return timeo;
+}
+
+int bt_sock_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
+ struct msghdr *msg, size_t size, int flags)
+{
+ struct sock *sk = sock->sk;
+ int err = 0;
+ size_t target, copied = 0;
+ long timeo;
+
+ if (flags & MSG_OOB)
+ return -EOPNOTSUPP;
+
+ msg->msg_namelen = 0;
+
+ BT_DBG("sk %p size %zu", sk, size);
+
+ lock_sock(sk);
+
+ target = sock_rcvlowat(sk, flags & MSG_WAITALL, size);
+ timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
+
+ do {
+ struct sk_buff *skb;
+ int chunk;
+
+ skb = skb_dequeue(&sk->sk_receive_queue);
+ if (!skb) {
+ if (copied >= target)
+ break;
+
+ if ((err = sock_error(sk)) != 0)
+ break;
+ if (sk->sk_shutdown & RCV_SHUTDOWN)
+ break;
+
+ err = -EAGAIN;
+ if (!timeo)
+ break;
+
+ timeo = bt_sock_data_wait(sk, timeo);
+
+ if (signal_pending(current)) {
+ err = sock_intr_errno(timeo);
+ goto out;
+ }
+ continue;
+ }
+
+ chunk = min_t(unsigned int, skb->len, size);
+ if (memcpy_toiovec(msg->msg_iov, skb->data, chunk)) {
+ skb_queue_head(&sk->sk_receive_queue, skb);
+ if (!copied)
+ copied = -EFAULT;
+ break;
+ }
+ copied += chunk;
+ size -= chunk;
+
+ sock_recv_ts_and_drops(msg, sk, skb);
+
+ if (!(flags & MSG_PEEK)) {
+ skb_pull(skb, chunk);
+ if (skb->len) {
+ skb_queue_head(&sk->sk_receive_queue, skb);
+ break;
+ }
+ kfree_skb(skb);
+
+ } else {
+ /* put message back and return */
+ skb_queue_head(&sk->sk_receive_queue, skb);
+ break;
+ }
+ } while (size);
+
+out:
+ release_sock(sk);
+ return copied ? : err;
+}
+EXPORT_SYMBOL(bt_sock_stream_recvmsg);
+
static inline unsigned int bt_accept_poll(struct sock *parent)
{
struct list_head *p, *n;
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
^ permalink raw reply related
* [PATCH 5/9] Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTM.
From: Mat Martineau @ 2010-08-04 22:49 UTC (permalink / raw)
To: linux-bluetooth; +Cc: marcel, gustavo, rshaffer, linux-arm-msm, Mat Martineau
In-Reply-To: <1280962146-22604-1-git-send-email-mathewm@codeaurora.org>
remote_tx_win is intended to be set on receipt of an L2CAP
configuration request. The value is used to determine the size of the
transmit window on the remote side of an ERTM connection, so L2CAP
can stop sending frames when that remote window is full.
An incorrect remote_tx_win value will cause the stack to not fully
utilize the tx window (performance impact), or to overfill the remote
tx window (causing dropped frames or a disconnect).
This patch removes an extra setting of remote_tx_win when a
configuration response is received. The transmit window has a
different meaning in a response - it is an informational value
less than or equal to the local tx_win.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/l2cap.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 8cf9569..f0f3c7c 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -2808,7 +2808,6 @@ static int l2cap_parse_conf_rsp(struct sock *sk, void *rsp, int len, void *data,
if (*result == L2CAP_CONF_SUCCESS) {
switch (rfc.mode) {
case L2CAP_MODE_ERTM:
- pi->remote_tx_win = rfc.txwin_size;
pi->retrans_timeout = le16_to_cpu(rfc.retrans_timeout);
pi->monitor_timeout = le16_to_cpu(rfc.monitor_timeout);
pi->mps = le16_to_cpu(rfc.max_pdu_size);
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
^ permalink raw reply related
* [PATCH 4/9] Bluetooth: Fix endianness issue with L2CAP MPS configuration.
From: Mat Martineau @ 2010-08-04 22:49 UTC (permalink / raw)
To: linux-bluetooth; +Cc: marcel, gustavo, rshaffer, linux-arm-msm, Mat Martineau
In-Reply-To: <1280962146-22604-1-git-send-email-mathewm@codeaurora.org>
Incoming configuration values must be converted to native CPU order
before use. This fixes a bug where a little-endian MPS value is
compared to a native CPU value. On big-endian processors, this
can cause ERTM and streaming mode segmentation to produce PDUs
that are larger than the remote stack is expecting, or that would
produce fragmented skbs that the current FCS code cannot handle.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/l2cap.c | 9 ++++-----
1 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 920a53f..8cf9569 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -2708,10 +2708,10 @@ done:
case L2CAP_MODE_ERTM:
pi->remote_tx_win = rfc.txwin_size;
pi->remote_max_tx = rfc.max_transmit;
- if (rfc.max_pdu_size > pi->conn->mtu - 10)
- rfc.max_pdu_size = le16_to_cpu(pi->conn->mtu - 10);
pi->remote_mps = le16_to_cpu(rfc.max_pdu_size);
+ if (pi->remote_mps > pi->conn->mtu - 10)
+ pi->remote_mps = pi->conn->mtu - 10;
rfc.retrans_timeout =
le16_to_cpu(L2CAP_DEFAULT_RETRANS_TO);
@@ -2726,10 +2726,9 @@ done:
break;
case L2CAP_MODE_STREAMING:
- if (rfc.max_pdu_size > pi->conn->mtu - 10)
- rfc.max_pdu_size = le16_to_cpu(pi->conn->mtu - 10);
-
pi->remote_mps = le16_to_cpu(rfc.max_pdu_size);
+ if (pi->remote_mps > pi->conn->mtu - 10)
+ pi->remote_mps = pi->conn->mtu - 10;
pi->conf_state |= L2CAP_CONF_MODE_DONE;
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
^ permalink raw reply related
* [PATCH 3/9] Bluetooth: Validate PSM values in calls to connect() and bind().
From: Mat Martineau @ 2010-08-04 22:49 UTC (permalink / raw)
To: linux-bluetooth; +Cc: marcel, gustavo, rshaffer, linux-arm-msm, Mat Martineau
In-Reply-To: <1280962146-22604-1-git-send-email-mathewm@codeaurora.org>
Valid L2CAP PSMs are odd numbers, and the least significant bit of the
most significant byte must be 0.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/l2cap.c | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index a2706d9..920a53f 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -1008,6 +1008,12 @@ static int l2cap_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
goto done;
}
+ /* If specified, PSM must be odd and lsb of upper byte must be 0 */
+ if (la.l2_psm && (__le16_to_cpu(la.l2_psm) & 0x0101) != 0x0001) {
+ err = -EINVAL;
+ goto done;
+ }
+
if (la.l2_psm && __le16_to_cpu(la.l2_psm) < 0x1001 &&
!capable(CAP_NET_BIND_SERVICE)) {
err = -EACCES;
@@ -1190,6 +1196,12 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr, int al
goto done;
}
+ /* PSM must be odd and lsb of upper byte must be 0 */
+ if ((__le16_to_cpu(la.l2_psm) & 0x0101) != 0x0001) {
+ err = -EINVAL;
+ goto done;
+ }
+
/* Set destination address and psm */
bacpy(&bt_sk(sk)->dst, &la.l2_bdaddr);
l2cap_pi(sk)->psm = la.l2_psm;
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
^ permalink raw reply related
* [PATCH 2/9] Bluetooth: Change default ERTM retransmit timeout.
From: Mat Martineau @ 2010-08-04 22:48 UTC (permalink / raw)
To: linux-bluetooth; +Cc: marcel, gustavo, rshaffer, linux-arm-msm, Mat Martineau
In-Reply-To: <1280962146-22604-1-git-send-email-mathewm@codeaurora.org>
The L2CAP spec requires that the ERTM retransmit timeout be at least 2
seconds for BR/EDR connections.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
include/net/bluetooth/l2cap.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 636724b..16e412f 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -33,7 +33,7 @@
#define L2CAP_DEFAULT_FLUSH_TO 0xffff
#define L2CAP_DEFAULT_TX_WINDOW 63
#define L2CAP_DEFAULT_MAX_TX 3
-#define L2CAP_DEFAULT_RETRANS_TO 1000 /* 1 second */
+#define L2CAP_DEFAULT_RETRANS_TO 2000 /* 2 seconds */
#define L2CAP_DEFAULT_MONITOR_TO 12000 /* 12 seconds */
#define L2CAP_DEFAULT_MAX_PDU_SIZE 672
#define L2CAP_DEFAULT_ACK_TO 200
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
^ permalink raw reply related
* [PATCH 1/9] Bluetooth: Only enable for L2CAP FCS for ERTM or streaming.
From: Mat Martineau @ 2010-08-04 22:48 UTC (permalink / raw)
To: linux-bluetooth; +Cc: marcel, gustavo, rshaffer, linux-arm-msm, Mat Martineau
In-Reply-To: <1280962146-22604-1-git-send-email-mathewm@codeaurora.org>
This fixes a bug which caused the FCS setting to show L2CAP_FCS_CRC16
with L2CAP modes other than ERTM or streaming. At present, this only
affects the FCS value shown with getsockopt() for basic mode.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/l2cap.c | 17 +++++++++++++----
1 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 9ba1e8e..a2706d9 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -3063,6 +3063,17 @@ static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hd
return 0;
}
+static inline int l2cap_fcs_needed(struct l2cap_pinfo *pi)
+{
+ if (pi->mode != L2CAP_MODE_ERTM && pi->mode != L2CAP_MODE_STREAMING)
+ return 0;
+ else {
+ /* FCS is enabled if one or both sides request it. */
+ return !(pi->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
+ pi->fcs == L2CAP_FCS_CRC16;
+ }
+}
+
static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data)
{
struct l2cap_conf_req *req = (struct l2cap_conf_req *) data;
@@ -3127,8 +3138,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr
goto unlock;
if (l2cap_pi(sk)->conf_state & L2CAP_CONF_INPUT_DONE) {
- if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
- l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
+ if (l2cap_fcs_needed(l2cap_pi(sk)))
l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
sk->sk_state = BT_CONNECTED;
@@ -3217,8 +3227,7 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr
l2cap_pi(sk)->conf_state |= L2CAP_CONF_INPUT_DONE;
if (l2cap_pi(sk)->conf_state & L2CAP_CONF_OUTPUT_DONE) {
- if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
- l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
+ if (l2cap_fcs_needed(l2cap_pi(sk)))
l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
sk->sk_state = BT_CONNECTED;
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
^ permalink raw reply related
* [PATCH v2 0/9] Bluetooth: L2CAP updates for PSM validation and ERTM.
From: Mat Martineau @ 2010-08-04 22:48 UTC (permalink / raw)
To: linux-bluetooth; +Cc: marcel, gustavo, rshaffer, linux-arm-msm
This is a collection of ERTM-related patches, including some L2CAP
configuration fixes and allowing partial-frame reads from L2CAP
SOCK_STREAM sockets. PSM validation is also included, although that
is not restricted to ERTM.
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
^ permalink raw reply
* [PATCH] Use a valid PSM as the default in l2test.
From: Mat Martineau @ 2010-08-04 22:31 UTC (permalink / raw)
To: linux-bluetooth; +Cc: marcel, johan.hedberg, rshaffer, Mat Martineau
The Bluetooth spec requires PSMs to be odd numbers, with the least
significant bit of the most significant byte set to 0. This
change is a prerequisite for PSM validation in the kernel.
---
test/l2test.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/test/l2test.c b/test/l2test.c
index 0bb46f3..32cd27a 100644
--- a/test/l2test.c
+++ b/test/l2test.c
@@ -87,7 +87,7 @@ static long buffer_size = 2048;
/* Default addr and psm */
static bdaddr_t bdaddr;
-static unsigned short psm = 10;
+static unsigned short psm = 0x1001;
/* Default number of frames to send (-1 = infinite) */
static int num_frames = -1;
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
^ permalink raw reply related
* Re: [PATCH v7 0/7] Enhanced support for extended inquiry response
From: ingas @ 2010-08-04 20:59 UTC (permalink / raw)
To: johan.hedberg; +Cc: linux-bluetooth
In-Reply-To: <20100804190439.GA18786@jh-x301>
Hi Johan,
>
> There seems to be two "4/7" patches with the same summary line but
> different content. What's going on? The patches apply cleanly but the
> commit messages should match the content before I can push upstream.
> Other than that and one other minor thing (I'll send another email about
> it) the patches are starting to look like upstreamable quality. Thanks
> for bearing with me and doing all the requested fixes (which I imagine
> can feel overly pedantic at times) :)
Something happened in the process of mailing the patches (not sure what
since it's a semi automatic process). Anyway, I will resubmit yet again
with the fix for the last patch. Version 8 :)
Regards,
Inga
^ permalink raw reply
* Re: [PATCH 7/7] Add service UUIDs from EIR to device properties in "Device Found" signal.
From: Johan Hedberg @ 2010-08-04 19:11 UTC (permalink / raw)
To: Inga Stotland; +Cc: linux-bluetooth, rshaffer, marcel
In-Reply-To: <1280941655-14313-8-git-send-email-ingas@codeaurora.org>
Hi Inga,
On Wed, Aug 04, 2010, Inga Stotland wrote:
> ---
> src/adapter.c | 106 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
> src/adapter.h | 4 +-
> src/dbus-hci.c | 6 ++--
> 3 files changed, 108 insertions(+), 8 deletions(-)
A few more things here:
> +static char **get_eir_uuids(uint8_t *eir_data, size_t *uuid_count)
> +{
> + uint8_t len = 0;
> + char **uuid_buf = NULL;
> + char **uuids;
<snip>
> + uuid_buf = g_new0(char *, total + 1);
> +
> + if (!uuid_buf)
> + return NULL;
> +
> + uuids = uuid_buf;
First of all, g_new0 is guaranteed to return non-NULL. If something goes
wrong with the memory allocation abort() will be called and the process
will exit. So the NULL check is redundant. Secondly, I don't think you
need both of these variables (see further below).
> + for (i = 0; i < uuid16_count; i++) {
> + uint16_t val16 = uuid16[1];
> +
> + val16 = (val16<<8) + uuid16[0];
Space missing before and after <<
> + service.value.uuid16 = val16;
> + *uuids++ = bt_uuid2string(&service);
Instead of incrementing the pointer you could just do
uuids[i] = bt_uuid2string(&service);
That way the original pointer stays unchanged and you don't need the
second one.
Johan
^ permalink raw reply
* Re: [PATCH v7 0/7] Enhanced support for extended inquiry response
From: Johan Hedberg @ 2010-08-04 19:04 UTC (permalink / raw)
To: Inga Stotland; +Cc: linux-bluetooth, rshaffer, marcel
In-Reply-To: <1280941655-14313-1-git-send-email-ingas@codeaurora.org>
Hi Inga,
On Wed, Aug 04, 2010, Inga Stotland wrote:
> EIR needs to be updated whenever local SDP record database changes.
> Previously, when an SDP record was added/removed/updated, EIR would
> be written in callback fired off HCI "Command Complete" event set off by
> "Write Class Of Device" command. However, if the class of device did not
> need to be updated, the EIR write was not happening either. This
> implementation has been augmented to write new EIR when modification
> in SDP database does not lead to updating of class of device.
>
> Added support for UUID128 service descriptors in local EIR.
>
> Service UUIDs are written to "device properties" dictionary when emitting
> "Device Found" signal. This allows peek at available services offered by
> a remote device without establishing SDP connection.
There seems to be two "4/7" patches with the same summary line but
different content. What's going on? The patches apply cleanly but the
commit messages should match the content before I can push upstream.
Other than that and one other minor thing (I'll send another email about
it) the patches are starting to look like upstreamable quality. Thanks
for bearing with me and doing all the requested fixes (which I imagine
can feel overly pedantic at times) :)
Johan
^ permalink raw reply
* Re: Changes in HDP API
From: Elvis Pfützenreuter @ 2010-08-04 18:22 UTC (permalink / raw)
To: Jose Antonio Santos Cadenas; +Cc: linux-bluetooth
In-Reply-To: <1280908152-3743-1-git-send-email-santoscadenas@gmail.com>
On 04/08/2010, at 04:49, Jose Antonio Santos Cadenas wrote:
> This patch makes some changes in the HDP API based in the conversation that I
> had yesterday with Luiz and Elvis.
>
> I still have a doubt about the notification of devices in the agent. Luiz
> commented that with this API the Agent and the Application could not be in
> different processes, is this a problem?
Is not a problem and IMHO it does not make sense at all. The Agent in HDP API context is as a mere vehicle for callbacks, because signals are seen by every process while the nature of health devices demands some privacy/secrecy (I have a faint memory about privacy being a general requirement for IEEE protocol as well as Continua certification.)
The agent is always coupled with an application. The most typical usage of BlueZ HDP is as sink role, which means the application creates the application, which publishes the role via SDP, and sits idle until some source connects, which is notified via the agent.
^ permalink raw reply
* Re: Changes in HDP API
From: José Antonio Santos Cadenas @ 2010-08-04 17:53 UTC (permalink / raw)
To: Luiz Augusto von Dentz; +Cc: linux-bluetooth
In-Reply-To: <AANLkTinO4=BjcNP5uyi_nX0axaBth7aUAhgOoFdPKrY2@mail.gmail.com>
Hi,
El Wednesday 04 August 2010 18:45:50 Luiz Augusto von Dentz escribió:
> Hi,
>
> On Wed, Aug 4, 2010 at 4:54 PM, José Antonio Santos Cadenas
>
> <santoscadenas@gmail.com> wrote:
> >> This has 2 main advantages:
> >>
> >> 1. Anyone can request to connect not only applications which holds
> >> local endpoints
> >
> > How can you guess the remote end point to connect to if you don't have a
> > local end point?
>
> There is no endpoints involved in this case, bluetooth applet/agent
> has knowledge only of the device so bluetoothd will need to figure out
> all the matching endpoint and make sure local endpoint get notified
> about the available channels, so responding your question there is
> nothing to guess it all about matching the endpoints if there is no
> match it just fails after the discover as simple as that.
Sorry but I don't understand the answer. I think that the daemon needs to
guess the remote end point to connect to when the user performs a connection
of a data channel to a device (I mean the mdepid where the data channel will
be connected). In HDP each data channel can be configured in a specific way
(reliable or streaming) and is connected for an specific usage (that's the
data type parameter in the SDP record) so you have to specify this during the
connection of the channel.
An other thing to solve is the way that the data channel deletion is notified
if there is no associated agent, I mean, if you just do a Connect without
registering an agent first. This kind of events are supposed to be received by
the agent. An other special issue of HDP, data channels can be open or closed
but they are still active because reconnections are possible and this implies
no disconnection for the application layer.
>
> At least that is the idea around connect/disconnect in gnome-bluetooth
> and N900 bluetooth application does have a similar design.
I don't know how this is exactly working (I'll have a deeper look), but I
guess that only one agent is allowed. I think that will be great to have
multiple agents in HDP because more than one application can be using HDP at
the same time. I don't know if with only one agent this can be solved.
Regards
Jose.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox