Linux btrace development
 help / color / mirror / Atom feed
* the difference between btt and blkparse
@ 2010-03-01 11:26 Xuekun Hu
  2010-03-01 19:20 ` Alan D. Brunelle
  2010-03-02  3:44 ` Xuekun Hu
  0 siblings, 2 replies; 3+ messages in thread
From: Xuekun Hu @ 2010-03-01 11:26 UTC (permalink / raw)
  To: linux-btrace

Hi, Guys

From the doc, the standard work-flow for btt is to handle the binary
output from "blkparse -d". I found btt can also directly handle the
raw trace file generated by blktrace. However I found the two results
are not match.

For example,
1. "dd if=/dev/urandom of=test" on /dev/sda1
2. blktrace -d /dev/sda -o trace
3. blkparse -i trace.blktrace.* -d bp.bin
4. btt -i bp.bin
Outputs from "btt -i bp.bin"
========== All Devices ==========

            ALL           MIN           AVG           MAX           N
--------------- ------------- ------------- ------------- -----------

Q2Q               0.000000475   0.000064279   0.365450177        5779
Q2G               0.000000558   0.000001273   0.000020606        1168
G2I               0.000000153   0.000000348   0.000001737        1168
Q2M               0.000000126   0.000000253   0.000018475       91312
I2D               0.000001246   0.032353034   0.174700914        1168
M2D               0.000001785   0.043371005   0.161936556       91312
D2C               0.000176612   0.147189282   0.369407869        5780
Q2C               0.000179449   0.190421403   0.369435695        5780

5. btt -i trace.blktrace.*
outputs from "btt -i trace.blktrace.*"
========== All Devices ==========

            ALL           MIN           AVG           MAX           N
--------------- ------------- ------------- ------------- -----------

Q2Q               0.000000497   0.000094690   0.366905512        3923
Q2G               0.000000643   0.000001384   0.000020606          57
G2I               0.000000153   0.000000368   0.000001737          57
Q2M               0.000000126   0.000000263   0.000018475        3867
I2D               0.000001246   0.007264465   0.174700914          57
M2D               0.000001785   0.006241516   0.064217079        3867
D2C               0.000176612   0.125216704   0.369407869        3924
Q2C               0.000179449   0.131473364   0.369435695        3924

At the 4) step, the total number of requests are 5780, at the 5) step,
the total number of requests are 3924.
at the 4) step, Q2G is 1168, Q2M is 91312, from my understanding, Q2G
+ Q2M should equal to Q2C. So seems like the 4) result is not correct,
while 5) result is correct.

Is my understanding right, or is it a blkparse bug?

Thx, Xuekun

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2010-03-02  3:44 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-03-01 11:26 the difference between btt and blkparse Xuekun Hu
2010-03-01 19:20 ` Alan D. Brunelle
2010-03-02  3:44 ` Xuekun Hu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox