From: Josef Bacik <jbacik@fusionio.com>
To: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: Josef Bacik <JBacik@fusionio.com>,
Chris Mason <clmason@fusionio.com>,
"linux-btrfs@vger.kernel.org" <linux-btrfs@vger.kernel.org>
Subject: Re: No space left on device (28)
Date: Tue, 26 Mar 2013 11:25:53 -0400 [thread overview]
Message-ID: <20130326152553.GN1955@localhost.localdomain> (raw)
In-Reply-To: <5151B8AF.60900@profihost.ag>
On Tue, Mar 26, 2013 at 09:03:11AM -0600, Stefan Priebe - Profihost AG wrote:
> Hi,
> Am 26.03.2013 15:44, schrieb Josef Bacik:
> >>>> Am 26.03.2013 13:53, schrieb Josef Bacik:
> >>>> no - it's just mounted with mount -o noatime
> >>>>
> >>>> :~# cat /proc/mounts | grep btrfs
> >>>> /dev/mapper/raid54tb1 /mnt btrfs rw,noatime,space_cache 0 0
> >>>>
> >>>
> >>> Ok I think I see what's going on. Can you try this patch and see if it fixes
> >>> it? Thanks,
> >>
> >> It still does not fix the problem.
> >>
> >> The rsync output looks like this so it does not work for file a but then
> >> continues on c d e, ...
> >>
> >> sync -av --progress /backup/ /mnt/
> >> sending incremental file list
> >> .etc_openvpn/ipp.txt
> >> 229 100% 3.99kB/s 0:00:00 (xfer#2, to-check=1009/1196)
> >> .etc_openvpn/openvpn-status.log
> >> 360 100% 6.28kB/s 0:00:00 (xfer#3, to-check=1007/1196)
> >> rsync: rename "/mnt/.etc_openvpn/.ipp.txt.t9lucX" ->
> >> ".etc_openvpn/ipp.txt": No space left on device (28)
> >> .log/
> >> .log/UcliEvt.log
> >> 104188 100% 147.67kB/s 0:00:00 (xfer#4, to-check=1131/2700)
> >> .log/auth.log
> >> 15211522 100% 2.97MB/s 0:00:04 (xfer#5, to-check=1105/2700)
> >> .log/auth.log.1
> >> 19431424 61% 7.35MB/s 0:00:01
> >>
> >> the dmesg output looks like this:
> >> [ 551.321576] returning enospc, space_info 3, size 0 reserved 0, flush
> >> 2, flush_state 7 dumping space info
> >> [ 551.323694] space_info 4 has 6439526400 free, is full
> >> [ 551.323696] space_info total=25748307968, used=19308666880, pinned=0,
> >> reserved=49152, may_use=6438453248, readonly=65536
> >>
> >
> > Ok so then this is probably it, let me know if it helps. Thanks,
>
> OK it now has copied a lot of files (170) without an error all were very
> small.
>
Welp progress is good. Throw this into the mix and go again, it's just adding
some more debugging so I can make sure I'm going down the right rabbit hole.
Thanks,
Josef
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 84e8909..1cf810a 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -4026,6 +4026,15 @@ static int flush_space(struct btrfs_root *root,
return ret;
}
+
+static void dump_block_rsv(struct btrfs_block_rsv *block_rsv)
+{
+ spin_lock(&block_rsv->lock);
+ printk(KERN_ERR "dumping block rsv %u, size %Lu reserved %Lu\n",
+ block_rsv->type, block_rsv->size, block_rsv->reserved);
+ spin_unlock(&block_rsv->lock);
+}
+
/**
* reserve_metadata_bytes - try to reserve bytes from the block_rsv's space
* @root - the root we're allocating for
@@ -4179,6 +4188,9 @@ out:
"flush %d, flush_state %d dumping space info\n", block_rsv->type,
block_rsv->size, block_rsv->reserved, flush, flush_state);
spin_unlock(&block_rsv->lock);
+ dump_block_rsv(&root->fs_info->delalloc_block_rsv);
+ dump_block_rsv(&root->fs_info->delayed_block_rsv);
+ dump_block_rsv(&root->fs_info->global_block_rsv);
dump_space_info(space_info, 0, 0);
}
--
1.7.7.6
next prev parent reply other threads:[~2013-03-26 15:25 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-21 8:03 No space left on device (28) Stefan Priebe - Profihost AG
2013-03-21 18:00 ` Chris Mason
2013-03-21 18:35 ` Stefan Priebe - Profihost AG
2013-03-21 19:02 ` Chris Mason
2013-03-21 19:42 ` Stefan Priebe
2013-03-22 6:08 ` Stefan Priebe - Profihost AG
2013-03-22 12:11 ` Stefan Priebe - Profihost AG
2013-03-22 13:53 ` Josef Bacik
2013-03-22 13:56 ` Stefan Priebe - Profihost AG
2013-03-22 15:54 ` Josef Bacik
2013-03-22 19:10 ` Stefan Priebe
2013-03-22 20:49 ` Josef Bacik
2013-03-22 20:55 ` Stefan Priebe
2013-03-25 20:14 ` Josef Bacik
2013-03-26 7:45 ` Stefan Priebe
2013-03-26 12:53 ` Josef Bacik
2013-03-26 12:55 ` Stefan Priebe - Profihost AG
2013-03-26 13:30 ` Josef Bacik
2013-03-26 13:49 ` Stefan Priebe - Profihost AG
2013-03-26 14:44 ` Josef Bacik
2013-03-26 15:03 ` Stefan Priebe - Profihost AG
2013-03-26 15:25 ` Josef Bacik [this message]
2013-03-26 16:19 ` Stefan Priebe
2013-03-26 17:45 ` Josef Bacik
2013-03-26 19:05 ` Stefan Priebe
2013-03-26 19:16 ` Josef Bacik
2013-03-26 19:22 ` Stefan Priebe
2013-03-26 19:38 ` Josef Bacik
2013-03-26 19:47 ` Stefan Priebe
2013-03-22 6:13 ` Roman Mamedov
2013-03-22 6:24 ` cwillu
2013-03-22 6:39 ` Stefan Priebe - Profihost AG
2013-03-22 6:41 ` cwillu
2013-03-22 7:06 ` Stefan Priebe - Profihost AG
2013-03-22 6:38 ` Stefan Priebe - Profihost AG
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130326152553.GN1955@localhost.localdomain \
--to=jbacik@fusionio.com \
--cc=clmason@fusionio.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=s.priebe@profihost.ag \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox