public inbox for linux-btrfs@vger.kernel.org
 help / color / mirror / Atom feed
From: ira.weiny@intel.com
To: Dave Jiang <dave.jiang@intel.com>, Fan Ni <fan.ni@samsung.com>,
	 Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	 Navneet Singh <navneet.singh@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>,
	 Davidlohr Bueso <dave@stgolabs.net>,
	 Alison Schofield <alison.schofield@intel.com>,
	 Vishal Verma <vishal.l.verma@intel.com>,
	Ira Weiny <ira.weiny@intel.com>,
	 linux-btrfs@vger.kernel.org, linux-cxl@vger.kernel.org,
	 linux-kernel@vger.kernel.org
Subject: [PATCH 03/26] cxl/mem: Read dynamic capacity configuration from the device
Date: Sun, 24 Mar 2024 16:18:06 -0700	[thread overview]
Message-ID: <20240324-dcd-type2-upstream-v1-3-b7b00d623625@intel.com> (raw)
In-Reply-To: <20240324-dcd-type2-upstream-v1-0-b7b00d623625@intel.com>

From: Navneet Singh <navneet.singh@intel.com>

Devices can optionally support Dynamic Capacity (DC).  These devices are
known as Dynamic Capacity Devices (DCD).

Implement the DC mailbox commands as specified in CXL 3.1 section
8.2.9.9.9 (opcodes 48XXh).  Read the DC configuration and store the DC
region information in the device state.

Signed-off-by: Navneet Singh <navneet.singh@intel.com>
Co-developed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>

---
Changes for v1
[Jørgen: ensure CXL 2.0 device support by removing dc_event_log_size]
[iweiny/Jørgen: use get DC config command to signal DCD support]
[djiang: fix subject]
[Fan: add additional region configuration checks]
[Jonathan/djiang: split out region mode changes]
[Jonathan: fix up comments/kdoc]
[Jonathan: s/cxl_get_dc_id/cxl_get_dc_config/]
[Jonathan: use __free() in identify call]
[Jonathan: remove unneeded formatting changes]
[Jonathan: s/cxl_mbox_dynamic_capacity/cxl_mbox_get_dc_config_out/]
[Jonathan: s/cxl_mbox_get_dc_config/cxl_mbox_get_dc_config_in/]
[iweiny: remove type2 work dependancy/rebase on master]
[iweiny: fix 0day build issues]
---
 drivers/cxl/core/mbox.c | 184 +++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/cxl/cxlmem.h    |  49 +++++++++++++
 drivers/cxl/pci.c       |   4 ++
 3 files changed, 236 insertions(+), 1 deletion(-)

diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index ed4131c6f50b..14e8a7528a8b 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -1123,7 +1123,7 @@ int cxl_dev_state_identify(struct cxl_memdev_state *mds)
 	if (rc < 0)
 		return rc;
 
-	mds->total_bytes =
+	mds->static_cap =
 		le64_to_cpu(id.total_capacity) * CXL_CAPACITY_MULTIPLIER;
 	mds->volatile_only_bytes =
 		le64_to_cpu(id.volatile_capacity) * CXL_CAPACITY_MULTIPLIER;
@@ -1230,6 +1230,175 @@ int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16 cmd)
 	return rc;
 }
 
+static int cxl_dc_save_region_info(struct cxl_memdev_state *mds, u8 index,
+				   struct cxl_dc_region_config *region_config)
+{
+	struct cxl_dc_region_info *dcr = &mds->dc_region[index];
+	struct device *dev = mds->cxlds.dev;
+
+	dcr->base = le64_to_cpu(region_config->region_base);
+	dcr->decode_len = le64_to_cpu(region_config->region_decode_length);
+	dcr->decode_len *= CXL_CAPACITY_MULTIPLIER;
+	dcr->len = le64_to_cpu(region_config->region_length);
+	dcr->blk_size = le64_to_cpu(region_config->region_block_size);
+	dcr->dsmad_handle = le32_to_cpu(region_config->region_dsmad_handle);
+	dcr->flags = region_config->flags;
+	snprintf(dcr->name, CXL_DC_REGION_STRLEN, "dc%d", index);
+
+	/* Check regions are in increasing DPA order */
+	if (index > 0) {
+		struct cxl_dc_region_info *prev_dcr = &mds->dc_region[index - 1];
+
+		if ((prev_dcr->base + prev_dcr->decode_len) > dcr->base) {
+			dev_err(dev,
+				"DPA ordering violation for DC region %d and %d\n",
+				index - 1, index);
+			return -EINVAL;
+		}
+	}
+
+	if (!IS_ALIGNED(dcr->base, SZ_256M) ||
+	    !IS_ALIGNED(dcr->base, dcr->blk_size)) {
+		dev_err(dev, "DC region %d invalid base %#llx blk size %#llx\n", index,
+			dcr->base, dcr->blk_size);
+		return -EINVAL;
+	}
+
+	if (dcr->decode_len == 0 || dcr->len == 0 || dcr->decode_len < dcr->len ||
+	    !IS_ALIGNED(dcr->len, dcr->blk_size)) {
+		dev_err(dev, "DC region %d invalid length; decode %#llx len %#llx blk size %#llx\n",
+			index, dcr->decode_len, dcr->len, dcr->blk_size);
+		return -EINVAL;
+	}
+
+	if (dcr->blk_size == 0 || dcr->blk_size % 0x40 ||
+	    !is_power_of_2(dcr->blk_size)) {
+		dev_err(dev, "DC region %d invalid block size; %#llx\n",
+			index, dcr->blk_size);
+		return -EINVAL;
+	}
+
+	dev_dbg(dev,
+		"DC region %s DPA: %#llx LEN: %#llx BLKSZ: %#llx\n",
+		dcr->name, dcr->base, dcr->decode_len, dcr->blk_size);
+
+	return 0;
+}
+
+/* Returns the number of regions in dc_resp or -ERRNO */
+static int cxl_get_dc_config(struct cxl_memdev_state *mds, u8 start_region,
+			     struct cxl_mbox_get_dc_config_out *dc_resp,
+			     size_t dc_resp_size)
+{
+	struct cxl_mbox_get_dc_config_in get_dc = (struct cxl_mbox_get_dc_config_in) {
+		.region_count = CXL_MAX_DC_REGION,
+		.start_region_index = start_region,
+	};
+	struct cxl_mbox_cmd mbox_cmd = (struct cxl_mbox_cmd) {
+		.opcode = CXL_MBOX_OP_GET_DC_CONFIG,
+		.payload_in = &get_dc,
+		.size_in = sizeof(get_dc),
+		.size_out = dc_resp_size,
+		.payload_out = dc_resp,
+		.min_out = 1,
+	};
+	struct device *dev = mds->cxlds.dev;
+	int rc;
+
+	rc = cxl_internal_send_cmd(mds, &mbox_cmd);
+	if (rc < 0)
+		return rc;
+
+	rc = dc_resp->avail_region_count - start_region;
+
+	/*
+	 * The number of regions in the payload may have been truncated due to
+	 * payload_size limits; if so adjust the returned count to match.
+	 */
+	if (mbox_cmd.size_out < sizeof(*dc_resp))
+		rc = CXL_REGIONS_RETURNED(mbox_cmd.size_out);
+
+	dev_dbg(dev, "Read %d/%d DC regions\n", rc, dc_resp->avail_region_count);
+
+	return rc;
+}
+
+static bool cxl_dcd_supported(struct cxl_memdev_state *mds)
+{
+	return test_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds);
+}
+
+/**
+ * cxl_dev_dynamic_capacity_identify() - Reads the dynamic capacity
+ *					 information from the device.
+ * @mds: The memory device state
+ *
+ * Read Dynamic Capacity information from the device and populate the state
+ * structures for later use.
+ *
+ * Return: 0 if identify was executed successfully, -ERRNO on error.
+ */
+int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds)
+{
+	size_t dc_resp_size = mds->payload_size;
+	struct device *dev = mds->cxlds.dev;
+	u8 start_region, i;
+	int rc = 0;
+
+	for (i = 0; i < CXL_MAX_DC_REGION; i++)
+		snprintf(mds->dc_region[i].name, CXL_DC_REGION_STRLEN, "<nil>");
+
+	/* Check GET_DC_CONFIG is supported by device */
+	if (!cxl_dcd_supported(mds)) {
+		dev_dbg(dev, "DCD not supported\n");
+		return 0;
+	}
+
+	struct cxl_mbox_get_dc_config_out *dc_resp __free(kfree) =
+					kvmalloc(dc_resp_size, GFP_KERNEL);
+	if (!dc_resp)
+		return -ENOMEM;
+
+	start_region = 0;
+	do {
+		int j;
+
+		rc = cxl_get_dc_config(mds, start_region, dc_resp, dc_resp_size);
+		if (rc < 0) {
+			dev_dbg(dev, "Failed to get DC config: %d\n", rc);
+			return rc;
+		}
+
+		mds->nr_dc_region += rc;
+
+		if (mds->nr_dc_region < 1 || mds->nr_dc_region > CXL_MAX_DC_REGION) {
+			dev_err(dev, "Invalid num of dynamic capacity regions %d\n",
+				mds->nr_dc_region);
+			return -EINVAL;
+		}
+
+		for (i = start_region, j = 0; i < mds->nr_dc_region; i++, j++) {
+			rc = cxl_dc_save_region_info(mds, i, &dc_resp->region[j]);
+			if (rc) {
+				dev_dbg(dev, "Failed to save region info: %d\n", rc);
+				return rc;
+			}
+		}
+
+		start_region = mds->nr_dc_region;
+
+	} while (mds->nr_dc_region < dc_resp->avail_region_count);
+
+	mds->dynamic_cap =
+		mds->dc_region[mds->nr_dc_region - 1].base +
+		mds->dc_region[mds->nr_dc_region - 1].decode_len -
+		mds->dc_region[0].base;
+	dev_dbg(dev, "Total dynamic capacity: %#llx\n", mds->dynamic_cap);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(cxl_dev_dynamic_capacity_identify, CXL);
+
 static int add_dpa_res(struct device *dev, struct resource *parent,
 		       struct resource *res, resource_size_t start,
 		       resource_size_t size, const char *type)
@@ -1260,8 +1429,12 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds)
 {
 	struct cxl_dev_state *cxlds = &mds->cxlds;
 	struct device *dev = cxlds->dev;
+	size_t untenanted_mem;
 	int rc;
 
+	untenanted_mem = mds->dc_region[0].base - mds->static_cap;
+	mds->total_bytes = mds->static_cap + untenanted_mem + mds->dynamic_cap;
+
 	if (!cxlds->media_ready) {
 		cxlds->dpa_res = DEFINE_RES_MEM(0, 0);
 		cxlds->ram_res = DEFINE_RES_MEM(0, 0);
@@ -1271,6 +1444,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds)
 
 	cxlds->dpa_res = DEFINE_RES_MEM(0, mds->total_bytes);
 
+	for (int i = 0; i < mds->nr_dc_region; i++) {
+		struct cxl_dc_region_info *dcr = &mds->dc_region[i];
+
+		rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->dc_res[i],
+				 dcr->base, dcr->decode_len, dcr->name);
+		if (rc)
+			return rc;
+	}
+
 	if (mds->partition_align_bytes == 0) {
 		rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0,
 				 mds->volatile_only_bytes, "ram");
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 79a67cff9143..4624cf612c1e 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -402,6 +402,7 @@ enum cxl_devtype {
 	CXL_DEVTYPE_CLASSMEM,
 };
 
+#define CXL_MAX_DC_REGION 8
 /**
  * struct cxl_dpa_perf - DPA performance property entry
  * @dpa_range - range for DPA address
@@ -431,6 +432,8 @@ struct cxl_dpa_perf {
  * @dpa_res: Overall DPA resource tree for the device
  * @pmem_res: Active Persistent memory capacity configuration
  * @ram_res: Active Volatile memory capacity configuration
+ * @dc_res: Active Dynamic Capacity memory configuration for each possible
+ *          region
  * @serial: PCIe Device Serial Number
  * @type: Generic Memory Class device or Vendor Specific Memory device
  */
@@ -445,10 +448,22 @@ struct cxl_dev_state {
 	struct resource dpa_res;
 	struct resource pmem_res;
 	struct resource ram_res;
+	struct resource dc_res[CXL_MAX_DC_REGION];
 	u64 serial;
 	enum cxl_devtype type;
 };
 
+#define CXL_DC_REGION_STRLEN 8
+struct cxl_dc_region_info {
+	u64 base;
+	u64 decode_len;
+	u64 len;
+	u64 blk_size;
+	u32 dsmad_handle;
+	u8 flags;
+	u8 name[CXL_DC_REGION_STRLEN];
+};
+
 /**
  * struct cxl_memdev_state - Generic Type-3 Memory Device Class driver data
  *
@@ -467,6 +482,8 @@ struct cxl_dev_state {
  * @enabled_cmds: Hardware commands found enabled in CEL.
  * @exclusive_cmds: Commands that are kernel-internal only
  * @total_bytes: sum of all possible capacities
+ * @static_cap: Sum of static RAM and PMEM capacities
+ * @dynamic_cap: Complete DPA range occupied by DC regions
  * @volatile_only_bytes: hard volatile capacity
  * @persistent_only_bytes: hard persistent capacity
  * @partition_align_bytes: alignment size for partition-able capacity
@@ -474,6 +491,8 @@ struct cxl_dev_state {
  * @active_persistent_bytes: sum of hard + soft persistent
  * @next_volatile_bytes: volatile capacity change pending device reset
  * @next_persistent_bytes: persistent capacity change pending device reset
+ * @nr_dc_region: number of DC regions implemented in the memory device
+ * @dc_region: array containing info about the DC regions
  * @event: event log driver state
  * @poison: poison driver state info
  * @security: security driver state info
@@ -494,7 +513,10 @@ struct cxl_memdev_state {
 	DECLARE_BITMAP(dcd_cmds, CXL_DCD_ENABLED_MAX);
 	DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX);
 	DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX);
+
 	u64 total_bytes;
+	u64 static_cap;
+	u64 dynamic_cap;
 	u64 volatile_only_bytes;
 	u64 persistent_only_bytes;
 	u64 partition_align_bytes;
@@ -506,6 +528,9 @@ struct cxl_memdev_state {
 	struct cxl_dpa_perf ram_perf;
 	struct cxl_dpa_perf pmem_perf;
 
+	u8 nr_dc_region;
+	struct cxl_dc_region_info dc_region[CXL_MAX_DC_REGION];
+
 	struct cxl_event_state event;
 	struct cxl_poison_state poison;
 	struct cxl_security_state security;
@@ -705,6 +730,29 @@ struct cxl_mbox_set_partition_info {
 
 #define  CXL_SET_PARTITION_IMMEDIATE_FLAG	BIT(0)
 
+struct cxl_mbox_get_dc_config_in {
+	u8 region_count;
+	u8 start_region_index;
+} __packed;
+
+/* See CXL 3.0 Table 125 get dynamic capacity config Output Payload */
+struct cxl_mbox_get_dc_config_out {
+	u8 avail_region_count;
+	u8 rsvd[7];
+	struct cxl_dc_region_config {
+		__le64 region_base;
+		__le64 region_decode_length;
+		__le64 region_length;
+		__le64 region_block_size;
+		__le32 region_dsmad_handle;
+		u8 flags;
+		u8 rsvd[3];
+	} __packed region[];
+} __packed;
+#define CXL_DYNAMIC_CAPACITY_SANITIZE_ON_RELEASE_FLAG BIT(0)
+#define CXL_REGIONS_RETURNED(size_out) \
+	((size_out - 8) / sizeof(struct cxl_dc_region_config))
+
 /* Set Timestamp CXL 3.0 Spec 8.2.9.4.2 */
 struct cxl_mbox_set_timestamp_in {
 	__le64 timestamp;
@@ -828,6 +876,7 @@ enum {
 int cxl_internal_send_cmd(struct cxl_memdev_state *mds,
 			  struct cxl_mbox_cmd *cmd);
 int cxl_dev_state_identify(struct cxl_memdev_state *mds);
+int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds);
 int cxl_await_media_ready(struct cxl_dev_state *cxlds);
 int cxl_enumerate_cmds(struct cxl_memdev_state *mds);
 int cxl_mem_create_range_info(struct cxl_memdev_state *mds);
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 2ff361e756d6..216881455364 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -874,6 +874,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (rc)
 		return rc;
 
+	rc = cxl_dev_dynamic_capacity_identify(mds);
+	if (rc)
+		return rc;
+
 	rc = cxl_mem_create_range_info(mds);
 	if (rc)
 		return rc;

-- 
2.44.0


  parent reply	other threads:[~2024-03-24 23:18 UTC|newest]

Thread overview: 161+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-24 23:18 [PATCH 00/26] DCD: Add support for Dynamic Capacity Devices (DCD) ira.weiny
2024-03-24 23:18 ` [PATCH 01/26] cxl/mbox: Flag " ira.weiny
2024-03-25 16:11   ` Jonathan Cameron
2024-03-25 22:16   ` fan
2024-03-25 22:56   ` Davidlohr Bueso
2024-04-02 22:26     ` Ira Weiny
2024-03-26 16:34   ` Dave Jiang
2024-04-02 22:30     ` Ira Weiny
2024-04-10 18:15   ` Alison Schofield
2024-03-24 23:18 ` [PATCH 02/26] cxl/core: Separate region mode from decoder mode ira.weiny
2024-03-25 16:20   ` Jonathan Cameron
2024-04-02 23:24     ` Ira Weiny
2024-03-25 23:18   ` Davidlohr Bueso
2024-03-28  5:22     ` Ira Weiny
2024-03-28 20:09       ` Dave Jiang
2024-04-02 23:27         ` Ira Weiny
2024-04-24 17:58         ` Ira Weiny
2024-04-02 23:25     ` Ira Weiny
2024-04-10 18:49   ` Alison Schofield
2024-03-24 23:18 ` ira.weiny [this message]
2024-03-25 17:40   ` [PATCH 03/26] cxl/mem: Read dynamic capacity configuration from the device Jonathan Cameron
2024-04-03 22:22     ` Ira Weiny
2024-03-25 23:36   ` fan
2024-04-03 22:41     ` Ira Weiny
2024-04-02 11:41   ` Jørgen Hansen
2024-04-05 18:09     ` Ira Weiny
2024-04-09  8:42       ` Jørgen Hansen
2024-04-09  2:00   ` Alison Schofield
2024-03-24 23:18 ` [PATCH 04/26] cxl/region: Add dynamic capacity decoder and region modes ira.weiny
2024-03-25 17:42   ` Jonathan Cameron
2024-03-26 16:17   ` fan
2024-03-27 15:43   ` Dave Jiang
2024-04-05 18:19     ` Ira Weiny
2024-04-06  0:01       ` Dave Jiang
2024-05-14  2:40   ` Zhijian Li (Fujitsu)
2024-03-24 23:18 ` [PATCH 05/26] cxl/core: Simplify cxl_dpa_set_mode() Ira Weiny
2024-03-25 17:46   ` Jonathan Cameron
2024-03-25 21:38   ` Davidlohr Bueso
2024-03-26 16:25   ` fan
2024-03-26 17:46   ` Dave Jiang
2024-04-05 19:21     ` Ira Weiny
2024-04-06  0:02       ` Dave Jiang
2024-04-09  0:43   ` Alison Schofield
2024-05-03 19:09     ` Ira Weiny
2024-05-03 20:33       ` Alison Schofield
2024-05-04  1:19       ` Dan Williams
2024-05-06  4:06         ` Ira Weiny
2024-05-04  4:13       ` Dan Williams
2024-05-06  3:46         ` Ira Weiny
2024-03-24 23:18 ` [PATCH 06/26] cxl/port: Add Dynamic Capacity mode support to endpoint decoders ira.weiny
2024-03-26 16:35   ` fan
2024-04-05 19:50     ` Ira Weiny
2024-03-26 17:58   ` Dave Jiang
2024-04-05 20:34     ` Ira Weiny
2024-04-04  8:32   ` Jonathan Cameron
2024-04-05 20:56     ` Ira Weiny
2024-05-06 16:22       ` Dan Williams
2024-05-10  5:31         ` Ira Weiny
2024-04-10 20:33   ` Alison Schofield
2024-03-24 23:18 ` [PATCH 07/26] cxl/port: Add dynamic capacity size " ira.weiny
2024-04-05 13:54   ` Jonathan Cameron
2024-05-03 17:09     ` Ira Weiny
2024-05-03 17:21       ` Dan Williams
2024-05-06  4:07         ` Ira Weiny
2024-04-10 22:50   ` Alison Schofield
2024-03-24 23:18 ` [PATCH 08/26] cxl/mem: Expose device dynamic capacity capabilities ira.weiny
2024-03-25 23:40   ` Davidlohr Bueso
2024-03-26 18:30     ` fan
2024-04-04  8:44       ` Jonathan Cameron
2024-04-04  8:51   ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 09/26] cxl/region: Add Dynamic Capacity CXL region support ira.weiny
2024-03-26 22:31   ` fan
2024-04-10  4:25     ` Ira Weiny
2024-03-27 17:27   ` Dave Jiang
2024-04-10  4:35     ` Ira Weiny
2024-04-04 10:26   ` Jonathan Cameron
2024-04-10  4:40     ` Ira Weiny
2024-03-24 23:18 ` [PATCH 10/26] cxl/events: Factor out event msgnum configuration Ira Weiny
2024-03-27 17:38   ` Dave Jiang
2024-04-04 15:07   ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 11/26] cxl/pci: Delay event buffer allocation Ira Weiny
2024-03-25 22:26   ` Davidlohr Bueso
2024-03-27 17:38   ` Dave Jiang
2024-04-04 15:08   ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 12/26] cxl/pci: Factor out interrupt policy check Ira Weiny
2024-03-27 17:41   ` Dave Jiang
2024-04-04 15:10   ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 13/26] cxl/mem: Configure dynamic capacity interrupts ira.weiny
2024-03-26 23:12   ` fan
2024-04-10  4:48     ` Ira Weiny
2024-03-27 17:54   ` Dave Jiang
2024-04-10  5:26     ` Ira Weiny
2024-04-04 15:22   ` Jonathan Cameron
2024-04-10  5:34     ` Ira Weiny
2024-04-10 23:23   ` Alison Schofield
2024-05-06 16:56   ` Dan Williams
2024-03-24 23:18 ` [PATCH 14/26] cxl/region: Read existing extents on region creation ira.weiny
2024-03-26 23:27   ` fan
2024-04-10  5:46     ` Ira Weiny
2024-03-27 17:45   ` fan
2024-04-10  6:19     ` Ira Weiny
2024-03-27 18:31   ` Dave Jiang
2024-04-10  6:09     ` Ira Weiny
2024-04-02 13:57   ` Jørgen Hansen
2024-04-10  6:29     ` Ira Weiny
2024-04-04 16:04   ` Jonathan Cameron
2024-04-04 16:13   ` Jonathan Cameron
2024-04-10 17:44   ` Alison Schofield
2024-05-06 18:34   ` Dan Williams
2024-06-29  3:47     ` Ira Weiny
2024-03-24 23:18 ` [PATCH 15/26] range: Add range_overlaps() Ira Weiny
2024-03-25 18:33   ` David Sterba
2024-03-25 21:24   ` Davidlohr Bueso
2024-03-26 12:51   ` Johannes Thumshirn
2024-03-27 17:36   ` fan
2024-03-28 20:09   ` Dave Jiang
2024-04-04 16:06   ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 16/26] cxl/extent: Realize extent devices ira.weiny
2024-03-27 22:34   ` fan
2024-03-28 21:11   ` Dave Jiang
2024-04-24 19:57     ` Ira Weiny
2024-04-04 16:32   ` Jonathan Cameron
2024-04-30  3:23     ` Ira Weiny
2024-05-02 21:12       ` Dan Williams
2024-05-06  4:35         ` Ira Weiny
2024-04-11  0:09   ` Alison Schofield
2024-05-07  1:30   ` Dan Williams
2024-03-24 23:18 ` [PATCH 17/26] dax/region: Create extent resources on DAX region driver load ira.weiny
2024-04-04 16:36   ` Jonathan Cameron
2024-04-09 16:22   ` fan
2024-05-07  2:31   ` Dan Williams
2024-03-24 23:18 ` [PATCH 18/26] cxl/mem: Handle DCD add & release capacity events ira.weiny
2024-04-04 17:03   ` Jonathan Cameron
2024-05-07  5:04   ` Dan Williams
2024-03-24 23:18 ` [PATCH 19/26] dax/bus: Factor out dev dax resize logic Ira Weiny
2024-04-04 17:15   ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 20/26] dax: Document dax dev range tuple Ira Weiny
2024-04-01 17:06   ` Dave Jiang
2024-04-04 17:19   ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 21/26] dax/region: Prevent range mapping allocation on sparse regions Ira Weiny
2024-04-01 17:07   ` Dave Jiang
2024-04-10 23:02   ` Alison Schofield
2024-03-24 23:18 ` [PATCH 22/26] dax/region: Support DAX device creation on sparse DAX regions Ira Weiny
2024-04-04 17:36   ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 23/26] cxl/mem: Trace Dynamic capacity Event Record ira.weiny
2024-04-01 17:56   ` Dave Jiang
2024-04-04 17:38   ` Jonathan Cameron
2024-04-10 17:03   ` Alison Schofield
2024-03-24 23:18 ` [PATCH 24/26] tools/testing/cxl: Make event logs dynamic Ira Weiny
2024-03-24 23:18 ` [PATCH 25/26] tools/testing/cxl: Add DC Regions to mock mem data Ira Weiny
2024-03-24 23:18 ` [PATCH 26/26] tools/testing/cxl: Add Dynamic Capacity events Ira Weiny
2024-03-25 19:24 ` [PATCH 00/26] DCD: Add support for Dynamic Capacity Devices (DCD) fan
2024-03-28  5:20   ` Ira Weiny
2024-04-03 20:39     ` Jonathan Cameron
2024-04-04 10:20 ` Jonathan Cameron
2024-04-04 17:49 ` Jonathan Cameron
2024-05-01 23:49   ` Ira Weiny
2024-05-03  9:20     ` Jonathan Cameron
2024-05-06  4:24       ` Ira Weiny
2024-05-08 14:43         ` Jonathan Cameron
2024-04-10 18:01 ` Alison Schofield

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240324-dcd-type2-upstream-v1-3-b7b00d623625@intel.com \
    --to=ira.weiny@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=fan.ni@samsung.com \
    --cc=linux-btrfs@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=navneet.singh@intel.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox