From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>, Fan Ni <fan.ni@samsung.com>,
"Navneet Singh" <navneet.singh@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Davidlohr Bueso <dave@stgolabs.net>,
Alison Schofield <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
<linux-btrfs@vger.kernel.org>, <linux-cxl@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 14/26] cxl/region: Read existing extents on region creation
Date: Thu, 4 Apr 2024 17:04:21 +0100 [thread overview]
Message-ID: <20240404170421.0000440f@Huawei.com> (raw)
In-Reply-To: <20240324-dcd-type2-upstream-v1-14-b7b00d623625@intel.com>
On Sun, 24 Mar 2024 16:18:17 -0700
ira.weiny@intel.com wrote:
> From: Navneet Singh <navneet.singh@intel.com>
>
> Dynamic capacity device extents may be left in an accepted state on a
> device due to an unexpected host crash. In this case creation of a new
> region on top of the DC partition (region) is expected to expose those
> extents for continued use.
>
> Once all endpoint decoders are part of a region and the region is being
> realized read the device extent list. For ease of review, this patch
> stops after reading the extent list and leaves realization of the region
> extents to a future patch.
>
> Signed-off-by: Navneet Singh <navneet.singh@intel.com>
> Co-developed-by: Ira Weiny <ira.weiny@intel.com>
> Signed-off-by: Ira Weiny <ira.weiny@intel.com>
A few things inline.
J
> static void cxl_mem_get_records_log(struct cxl_memdev_state *mds,
> enum cxl_event_log_type type)
> {
> @@ -1406,6 +1462,142 @@ int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds)
> }
> EXPORT_SYMBOL_NS_GPL(cxl_dev_dynamic_capacity_identify, CXL);
>
> +static int cxl_dev_get_dc_extent_cnt(struct cxl_memdev_state *mds,
> + unsigned int *extent_gen_num)
> +{
> + struct cxl_mbox_get_dc_extent_in get_dc_extent;
> + struct cxl_mbox_get_dc_extent_out dc_extents;
> + struct cxl_mbox_cmd mbox_cmd;
> + unsigned int count;
> + int rc;
> +
> + get_dc_extent = (struct cxl_mbox_get_dc_extent_in) {
> + .extent_cnt = cpu_to_le32(0),
> + .start_extent_index = cpu_to_le32(0),
> + };
> +
> + mbox_cmd = (struct cxl_mbox_cmd) {
> + .opcode = CXL_MBOX_OP_GET_DC_EXTENT_LIST,
> + .payload_in = &get_dc_extent,
> + .size_in = sizeof(get_dc_extent),
> + .size_out = sizeof(dc_extents),
> + .payload_out = &dc_extents,
> + .min_out = 1,
Why 1?
> + };
> +
> + rc = cxl_internal_send_cmd(mds, &mbox_cmd);
> + if (rc < 0)
> + return rc;
> +
> + count = le32_to_cpu(dc_extents.total_extent_cnt);
> + *extent_gen_num = le32_to_cpu(dc_extents.extent_list_num);
> +
> + return count;
> +}
> +
> +static int cxl_dev_get_dc_extents(struct cxl_endpoint_decoder *cxled,
> + unsigned int start_gen_num,
> + unsigned int exp_cnt)
> +{
> + struct cxl_memdev_state *mds = cxled_to_mds(cxled);
> + unsigned int start_index, total_read;
> + struct device *dev = mds->cxlds.dev;
> + struct cxl_mbox_cmd mbox_cmd;
> +
> + struct cxl_mbox_get_dc_extent_out *dc_extents __free(kfree) =
> + kvmalloc(mds->payload_size, GFP_KERNEL);
> + if (!dc_extents)
> + return -ENOMEM;
> +
> + total_read = 0;
> + start_index = 0;
> + do {
> + unsigned int nr_ext, total_extent_cnt, gen_num;
> + struct cxl_mbox_get_dc_extent_in get_dc_extent;
> + int rc;
> +
> + get_dc_extent = (struct cxl_mbox_get_dc_extent_in) {
> + .extent_cnt = cpu_to_le32(exp_cnt - start_index),
> + .start_extent_index = cpu_to_le32(start_index),
> + };
> +
> + mbox_cmd = (struct cxl_mbox_cmd) {
> + .opcode = CXL_MBOX_OP_GET_DC_EXTENT_LIST,
> + .payload_in = &get_dc_extent,
> + .size_in = sizeof(get_dc_extent),
> + .size_out = mds->payload_size,
> + .payload_out = dc_extents,
> + .min_out = 1,
Why 1?
> + };
> +
> + rc = cxl_internal_send_cmd(mds, &mbox_cmd);
> + if (rc < 0)
> + return rc;
> +
> + nr_ext = le32_to_cpu(dc_extents->ret_extent_cnt);
> + total_read += nr_ext;
> + total_extent_cnt = le32_to_cpu(dc_extents->total_extent_cnt);
> + gen_num = le32_to_cpu(dc_extents->extent_list_num);
> +
> + dev_dbg(dev, "Get extent list count:%d generation Num:%d\n",
> + total_extent_cnt, gen_num);
> +
> + if (gen_num != start_gen_num || exp_cnt != total_extent_cnt) {
> + dev_err(dev, "Possible incomplete extent list; gen %u != %u : cnt %u != %u\n",
> + gen_num, start_gen_num, exp_cnt, total_extent_cnt);
> + return -EIO;
> + }
> +
> + for (int i = 0; i < nr_ext ; i++) {
> + dev_dbg(dev, "Processing extent %d/%d\n",
> + start_index + i, exp_cnt);
> + rc = cxl_validate_extent(mds, &dc_extents->extent[i]);
> + if (rc)
> + continue;
A blank line here
> + if (!cxl_dc_extent_in_ed(cxled, &dc_extents->extent[i]))
> + continue;
and here would make this more readable I think.
> + rc = cxl_ed_add_one_extent(cxled, &dc_extents->extent[i]);
> + if (rc)
> + return rc;
> + }
> +
> + start_index += nr_ext;
> + } while (exp_cnt > total_read);
> +
> + return 0;
> +}
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index 0d7b09a49dcf..3e563ab29afe 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
>
> +static int cxl_region_read_extents(struct cxl_region *cxlr)
> +{
> + struct cxl_region_params *p = &cxlr->params;
> + int i;
> +
> + for (i = 0; i < p->nr_targets; i++) {
> + int rc;
Maybe worth giving up early if we see nr_targets > 1?
If nothing else it saves people trying to figure out what happens if we
reboot into an older kernel that doesn't support interleave (from one
that does)
> +
> + rc = cxl_read_dc_extents(p->targets[i]);
> + if (rc)
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index 01bee6eedff3..8f2d8944d334 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> +/*
> + * CXL rev 3.1 section 8.2.9.2.1.6; Table 8-51
Throw a table name or section name into the reference so people
can find it in CXL rNext.
> + */
> +#define CXL_DC_EXTENT_TAG_LEN 0x10
> +struct cxl_dc_extent {
> + __le64 start_dpa;
> + __le64 length;
> + u8 tag[CXL_DC_EXTENT_TAG_LEN];
> + __le16 shared_extn_seq;
> + u8 reserved[6];
> +} __packed;
> +
> +/*
> + * Get Dynamic Capacity Extent List; Output Payload
> + * CXL rev 3.1 section 8.2.9.9.9.2; Table 8-167
> + */
> +struct cxl_mbox_get_dc_extent_out {
> + __le32 ret_extent_cnt;
> + __le32 total_extent_cnt;
> + __le32 extent_list_num;
Naming isn't that clear given generation bit missing.
> + u8 rsvd[4];
> + struct cxl_dc_extent extent[];
> +} __packed;
> +
next prev parent reply other threads:[~2024-04-04 16:04 UTC|newest]
Thread overview: 161+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-24 23:18 [PATCH 00/26] DCD: Add support for Dynamic Capacity Devices (DCD) ira.weiny
2024-03-24 23:18 ` [PATCH 01/26] cxl/mbox: Flag " ira.weiny
2024-03-25 16:11 ` Jonathan Cameron
2024-03-25 22:16 ` fan
2024-03-25 22:56 ` Davidlohr Bueso
2024-04-02 22:26 ` Ira Weiny
2024-03-26 16:34 ` Dave Jiang
2024-04-02 22:30 ` Ira Weiny
2024-04-10 18:15 ` Alison Schofield
2024-03-24 23:18 ` [PATCH 02/26] cxl/core: Separate region mode from decoder mode ira.weiny
2024-03-25 16:20 ` Jonathan Cameron
2024-04-02 23:24 ` Ira Weiny
2024-03-25 23:18 ` Davidlohr Bueso
2024-03-28 5:22 ` Ira Weiny
2024-03-28 20:09 ` Dave Jiang
2024-04-02 23:27 ` Ira Weiny
2024-04-24 17:58 ` Ira Weiny
2024-04-02 23:25 ` Ira Weiny
2024-04-10 18:49 ` Alison Schofield
2024-03-24 23:18 ` [PATCH 03/26] cxl/mem: Read dynamic capacity configuration from the device ira.weiny
2024-03-25 17:40 ` Jonathan Cameron
2024-04-03 22:22 ` Ira Weiny
2024-03-25 23:36 ` fan
2024-04-03 22:41 ` Ira Weiny
2024-04-02 11:41 ` Jørgen Hansen
2024-04-05 18:09 ` Ira Weiny
2024-04-09 8:42 ` Jørgen Hansen
2024-04-09 2:00 ` Alison Schofield
2024-03-24 23:18 ` [PATCH 04/26] cxl/region: Add dynamic capacity decoder and region modes ira.weiny
2024-03-25 17:42 ` Jonathan Cameron
2024-03-26 16:17 ` fan
2024-03-27 15:43 ` Dave Jiang
2024-04-05 18:19 ` Ira Weiny
2024-04-06 0:01 ` Dave Jiang
2024-05-14 2:40 ` Zhijian Li (Fujitsu)
2024-03-24 23:18 ` [PATCH 05/26] cxl/core: Simplify cxl_dpa_set_mode() Ira Weiny
2024-03-25 17:46 ` Jonathan Cameron
2024-03-25 21:38 ` Davidlohr Bueso
2024-03-26 16:25 ` fan
2024-03-26 17:46 ` Dave Jiang
2024-04-05 19:21 ` Ira Weiny
2024-04-06 0:02 ` Dave Jiang
2024-04-09 0:43 ` Alison Schofield
2024-05-03 19:09 ` Ira Weiny
2024-05-03 20:33 ` Alison Schofield
2024-05-04 1:19 ` Dan Williams
2024-05-06 4:06 ` Ira Weiny
2024-05-04 4:13 ` Dan Williams
2024-05-06 3:46 ` Ira Weiny
2024-03-24 23:18 ` [PATCH 06/26] cxl/port: Add Dynamic Capacity mode support to endpoint decoders ira.weiny
2024-03-26 16:35 ` fan
2024-04-05 19:50 ` Ira Weiny
2024-03-26 17:58 ` Dave Jiang
2024-04-05 20:34 ` Ira Weiny
2024-04-04 8:32 ` Jonathan Cameron
2024-04-05 20:56 ` Ira Weiny
2024-05-06 16:22 ` Dan Williams
2024-05-10 5:31 ` Ira Weiny
2024-04-10 20:33 ` Alison Schofield
2024-03-24 23:18 ` [PATCH 07/26] cxl/port: Add dynamic capacity size " ira.weiny
2024-04-05 13:54 ` Jonathan Cameron
2024-05-03 17:09 ` Ira Weiny
2024-05-03 17:21 ` Dan Williams
2024-05-06 4:07 ` Ira Weiny
2024-04-10 22:50 ` Alison Schofield
2024-03-24 23:18 ` [PATCH 08/26] cxl/mem: Expose device dynamic capacity capabilities ira.weiny
2024-03-25 23:40 ` Davidlohr Bueso
2024-03-26 18:30 ` fan
2024-04-04 8:44 ` Jonathan Cameron
2024-04-04 8:51 ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 09/26] cxl/region: Add Dynamic Capacity CXL region support ira.weiny
2024-03-26 22:31 ` fan
2024-04-10 4:25 ` Ira Weiny
2024-03-27 17:27 ` Dave Jiang
2024-04-10 4:35 ` Ira Weiny
2024-04-04 10:26 ` Jonathan Cameron
2024-04-10 4:40 ` Ira Weiny
2024-03-24 23:18 ` [PATCH 10/26] cxl/events: Factor out event msgnum configuration Ira Weiny
2024-03-27 17:38 ` Dave Jiang
2024-04-04 15:07 ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 11/26] cxl/pci: Delay event buffer allocation Ira Weiny
2024-03-25 22:26 ` Davidlohr Bueso
2024-03-27 17:38 ` Dave Jiang
2024-04-04 15:08 ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 12/26] cxl/pci: Factor out interrupt policy check Ira Weiny
2024-03-27 17:41 ` Dave Jiang
2024-04-04 15:10 ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 13/26] cxl/mem: Configure dynamic capacity interrupts ira.weiny
2024-03-26 23:12 ` fan
2024-04-10 4:48 ` Ira Weiny
2024-03-27 17:54 ` Dave Jiang
2024-04-10 5:26 ` Ira Weiny
2024-04-04 15:22 ` Jonathan Cameron
2024-04-10 5:34 ` Ira Weiny
2024-04-10 23:23 ` Alison Schofield
2024-05-06 16:56 ` Dan Williams
2024-03-24 23:18 ` [PATCH 14/26] cxl/region: Read existing extents on region creation ira.weiny
2024-03-26 23:27 ` fan
2024-04-10 5:46 ` Ira Weiny
2024-03-27 17:45 ` fan
2024-04-10 6:19 ` Ira Weiny
2024-03-27 18:31 ` Dave Jiang
2024-04-10 6:09 ` Ira Weiny
2024-04-02 13:57 ` Jørgen Hansen
2024-04-10 6:29 ` Ira Weiny
2024-04-04 16:04 ` Jonathan Cameron [this message]
2024-04-04 16:13 ` Jonathan Cameron
2024-04-10 17:44 ` Alison Schofield
2024-05-06 18:34 ` Dan Williams
2024-06-29 3:47 ` Ira Weiny
2024-03-24 23:18 ` [PATCH 15/26] range: Add range_overlaps() Ira Weiny
2024-03-25 18:33 ` David Sterba
2024-03-25 21:24 ` Davidlohr Bueso
2024-03-26 12:51 ` Johannes Thumshirn
2024-03-27 17:36 ` fan
2024-03-28 20:09 ` Dave Jiang
2024-04-04 16:06 ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 16/26] cxl/extent: Realize extent devices ira.weiny
2024-03-27 22:34 ` fan
2024-03-28 21:11 ` Dave Jiang
2024-04-24 19:57 ` Ira Weiny
2024-04-04 16:32 ` Jonathan Cameron
2024-04-30 3:23 ` Ira Weiny
2024-05-02 21:12 ` Dan Williams
2024-05-06 4:35 ` Ira Weiny
2024-04-11 0:09 ` Alison Schofield
2024-05-07 1:30 ` Dan Williams
2024-03-24 23:18 ` [PATCH 17/26] dax/region: Create extent resources on DAX region driver load ira.weiny
2024-04-04 16:36 ` Jonathan Cameron
2024-04-09 16:22 ` fan
2024-05-07 2:31 ` Dan Williams
2024-03-24 23:18 ` [PATCH 18/26] cxl/mem: Handle DCD add & release capacity events ira.weiny
2024-04-04 17:03 ` Jonathan Cameron
2024-05-07 5:04 ` Dan Williams
2024-03-24 23:18 ` [PATCH 19/26] dax/bus: Factor out dev dax resize logic Ira Weiny
2024-04-04 17:15 ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 20/26] dax: Document dax dev range tuple Ira Weiny
2024-04-01 17:06 ` Dave Jiang
2024-04-04 17:19 ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 21/26] dax/region: Prevent range mapping allocation on sparse regions Ira Weiny
2024-04-01 17:07 ` Dave Jiang
2024-04-10 23:02 ` Alison Schofield
2024-03-24 23:18 ` [PATCH 22/26] dax/region: Support DAX device creation on sparse DAX regions Ira Weiny
2024-04-04 17:36 ` Jonathan Cameron
2024-03-24 23:18 ` [PATCH 23/26] cxl/mem: Trace Dynamic capacity Event Record ira.weiny
2024-04-01 17:56 ` Dave Jiang
2024-04-04 17:38 ` Jonathan Cameron
2024-04-10 17:03 ` Alison Schofield
2024-03-24 23:18 ` [PATCH 24/26] tools/testing/cxl: Make event logs dynamic Ira Weiny
2024-03-24 23:18 ` [PATCH 25/26] tools/testing/cxl: Add DC Regions to mock mem data Ira Weiny
2024-03-24 23:18 ` [PATCH 26/26] tools/testing/cxl: Add Dynamic Capacity events Ira Weiny
2024-03-25 19:24 ` [PATCH 00/26] DCD: Add support for Dynamic Capacity Devices (DCD) fan
2024-03-28 5:20 ` Ira Weiny
2024-04-03 20:39 ` Jonathan Cameron
2024-04-04 10:20 ` Jonathan Cameron
2024-04-04 17:49 ` Jonathan Cameron
2024-05-01 23:49 ` Ira Weiny
2024-05-03 9:20 ` Jonathan Cameron
2024-05-06 4:24 ` Ira Weiny
2024-05-08 14:43 ` Jonathan Cameron
2024-04-10 18:01 ` Alison Schofield
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240404170421.0000440f@Huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=fan.ni@samsung.com \
--cc=ira.weiny@intel.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=navneet.singh@intel.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox