[PATCH v3] fstests: btrfs: add a new test case to verify compressed read

[PATCH v3] fstests: btrfs: add a new test case to verify compressed read

[Qu Wenruo]

The new test case is a regression test related to the block size < page
size handling of compressed read.

The test case will only be triggered with 64K page size and 4K btrfs
block size.
I'm using aarch64 with 64K page size to trigger the regression.

The test case will create the following file layout:

  base:
  [0, 64K): Single compressed data extent at bytenr X.

  new:
  [0, 32K): Reflinked from base [32K, 64K)
  [32K, 60K): Reflinked from base [0, 28K)
  [60K, 64K): New 4K write

  The range [0, 32K) and [32K, 64K) are pointing to the same compressed
  data.

  The last 4K write is a special workaround. It is a block aligned
  write, thus it will create the folio but without reading out the
  remaing part.

  This is to avoid readahead path, which has the proper fix.
  We want single folio read without readahead.

Then output the file "new" just after the last 4K write, then cycle
mount and output the content again.

For patched kernel, or with 4K page sized system, the test will pass,
the resulted content will not change during mount cycles.

For unpatched kernel and with 64K page size, the test will fail, the
content after the write will be incorrect (the range [32K, 60K) will be
zero), but after a mount cycle the content is correct again.

Signed-off-by: Qu Wenruo <wqu@suse.com>
---
Changelog:
v3:
- Fix the golden output which is generated by an unpatched kernel

v2:
- Remove the unnecessary sync inherited from the kernel fix
- Use _hexdump instead of open-coded od dumps
- Use the correct 'clone' group instead of 'reflink'
- Minor grammar fixes
  All thanks to Filipe.
---
 tests/btrfs/337     | 55 +++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/337.out | 23 +++++++++++++++++++
 2 files changed, 78 insertions(+)
 create mode 100755 tests/btrfs/337
 create mode 100644 tests/btrfs/337.out

diff --git a/tests/btrfs/337 b/tests/btrfs/337
new file mode 100755
index 00000000..9c409e4d
--- /dev/null
+++ b/tests/btrfs/337
@@ -0,0 +1,55 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2025 SUSE Linux Products GmbH.  All Rights Reserved.
+#
+# FS QA Test 337
+#
+# Test compressed read with shared extents, especially for bs < ps cases.
+#
+. ./common/preamble
+_begin_fstest auto quick compress clone
+
+_fixed_by_kernel_commit xxxxxxxxxxxx \
+	"btrfs: fix corruption reading compressed range when block size is smaller than page size"
+
+. ./common/filter
+. ./common/reflink
+
+_require_btrfs_support_sectorsize 4096
+_require_scratch_reflink
+
+# The layout used in the test case is all 4K based, and can only be reproduced
+# with page size larger than 4K.
+_scratch_mkfs -s 4k >> $seqres.full
+_scratch_mount "-o compress"
+
+# Create the reflink source, which must be a compressed extent.
+$XFS_IO_PROG -f -c "pwrite -S 0x0f 0 32K" \
+		-c "pwrite -S 0xf0 32K 32K" \
+		$SCRATCH_MNT/base >> $seqres.full
+echo "Reflink source:"
+_hexdump $SCRATCH_MNT/base
+
+# Create the reflink dest, which reverses the order of the two 32K ranges.
+#
+# And do a further aligned write into the last block.
+# This write is to make sure the folio exists in filemap, so that we won't go
+# through the readahead path (which has the proper handling) for the folio.
+$XFS_IO_PROG -f -c "reflink $SCRATCH_MNT/base 32K 0 32K" \
+		-c "reflink $SCRATCH_MNT/base 0 32K 32K" \
+		-c "pwrite 60K 4K" $SCRATCH_MNT/new >> $seqres.full
+
+# This will result an incorrect output for unpatched kernel.
+# The range [32K, 60K) will be zero due to incorrectly merged compressed read.
+echo "Before mount cycle:"
+_hexdump $SCRATCH_MNT/new
+
+_scratch_cycle_mount
+
+# This will go through readahead path, which has the proper handling, thus give
+# the correct content.
+echo "After mount cycle:"
+_hexdump $SCRATCH_MNT/new
+
+status=0
+_exit 0
diff --git a/tests/btrfs/337.out b/tests/btrfs/337.out
new file mode 100644
index 00000000..cecbbbcf
--- /dev/null
+++ b/tests/btrfs/337.out
@@ -0,0 +1,23 @@
+QA output created by 337
+Reflink source:
+000000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
+*
+008000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
+*
+010000
+Before mount cycle:
+000000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
+*
+008000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
+*
+00f000 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd  >................<
+*
+010000
+After mount cycle:
+000000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
+*
+008000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
+*
+00f000 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd  >................<
+*
+010000
-- 
2.49.0

Re: [PATCH v3] fstests: btrfs: add a new test case to verify compressed read

[Filipe Manana]

On Wed, Aug 27, 2025 at 2:44 AM Qu Wenruo <wqu@suse.com> wrote:
>
> The new test case is a regression test related to the block size < page
> size handling of compressed read.
>
> The test case will only be triggered with 64K page size and 4K btrfs
> block size.
> I'm using aarch64 with 64K page size to trigger the regression.
>
> The test case will create the following file layout:
>
>   base:
>   [0, 64K): Single compressed data extent at bytenr X.
>
>   new:
>   [0, 32K): Reflinked from base [32K, 64K)
>   [32K, 60K): Reflinked from base [0, 28K)
>   [60K, 64K): New 4K write
>
>   The range [0, 32K) and [32K, 64K) are pointing to the same compressed
>   data.
>
>   The last 4K write is a special workaround. It is a block aligned
>   write, thus it will create the folio but without reading out the
>   remaing part.
>
>   This is to avoid readahead path, which has the proper fix.
>   We want single folio read without readahead.
>
> Then output the file "new" just after the last 4K write, then cycle
> mount and output the content again.
>
> For patched kernel, or with 4K page sized system, the test will pass,
> the resulted content will not change during mount cycles.
>
> For unpatched kernel and with 64K page size, the test will fail, the
> content after the write will be incorrect (the range [32K, 60K) will be
> zero), but after a mount cycle the content is correct again.
>
> Signed-off-by: Qu Wenruo <wqu@suse.com>

Reviewed-by: Filipe Manana <fdmanana@suse.com>

Looks good, thanks.

> ---
> Changelog:
> v3:
> - Fix the golden output which is generated by an unpatched kernel
>
> v2:
> - Remove the unnecessary sync inherited from the kernel fix
> - Use _hexdump instead of open-coded od dumps
> - Use the correct 'clone' group instead of 'reflink'
> - Minor grammar fixes
>   All thanks to Filipe.
> ---
>  tests/btrfs/337     | 55 +++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/337.out | 23 +++++++++++++++++++
>  2 files changed, 78 insertions(+)
>  create mode 100755 tests/btrfs/337
>  create mode 100644 tests/btrfs/337.out
>
> diff --git a/tests/btrfs/337 b/tests/btrfs/337
> new file mode 100755
> index 00000000..9c409e4d
> --- /dev/null
> +++ b/tests/btrfs/337
> @@ -0,0 +1,55 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2025 SUSE Linux Products GmbH.  All Rights Reserved.
> +#
> +# FS QA Test 337
> +#
> +# Test compressed read with shared extents, especially for bs < ps cases.
> +#
> +. ./common/preamble
> +_begin_fstest auto quick compress clone
> +
> +_fixed_by_kernel_commit xxxxxxxxxxxx \
> +       "btrfs: fix corruption reading compressed range when block size is smaller than page size"
> +
> +. ./common/filter
> +. ./common/reflink
> +
> +_require_btrfs_support_sectorsize 4096
> +_require_scratch_reflink
> +
> +# The layout used in the test case is all 4K based, and can only be reproduced
> +# with page size larger than 4K.
> +_scratch_mkfs -s 4k >> $seqres.full
> +_scratch_mount "-o compress"
> +
> +# Create the reflink source, which must be a compressed extent.
> +$XFS_IO_PROG -f -c "pwrite -S 0x0f 0 32K" \
> +               -c "pwrite -S 0xf0 32K 32K" \
> +               $SCRATCH_MNT/base >> $seqres.full
> +echo "Reflink source:"
> +_hexdump $SCRATCH_MNT/base
> +
> +# Create the reflink dest, which reverses the order of the two 32K ranges.
> +#
> +# And do a further aligned write into the last block.
> +# This write is to make sure the folio exists in filemap, so that we won't go
> +# through the readahead path (which has the proper handling) for the folio.
> +$XFS_IO_PROG -f -c "reflink $SCRATCH_MNT/base 32K 0 32K" \
> +               -c "reflink $SCRATCH_MNT/base 0 32K 32K" \
> +               -c "pwrite 60K 4K" $SCRATCH_MNT/new >> $seqres.full
> +
> +# This will result an incorrect output for unpatched kernel.
> +# The range [32K, 60K) will be zero due to incorrectly merged compressed read.
> +echo "Before mount cycle:"
> +_hexdump $SCRATCH_MNT/new
> +
> +_scratch_cycle_mount
> +
> +# This will go through readahead path, which has the proper handling, thus give
> +# the correct content.
> +echo "After mount cycle:"
> +_hexdump $SCRATCH_MNT/new
> +
> +status=0
> +_exit 0
> diff --git a/tests/btrfs/337.out b/tests/btrfs/337.out
> new file mode 100644
> index 00000000..cecbbbcf
> --- /dev/null
> +++ b/tests/btrfs/337.out
> @@ -0,0 +1,23 @@
> +QA output created by 337
> +Reflink source:
> +000000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
> +*
> +008000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
> +*
> +010000
> +Before mount cycle:
> +000000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
> +*
> +008000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
> +*
> +00f000 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd  >................<
> +*
> +010000
> +After mount cycle:
> +000000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
> +*
> +008000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
> +*
> +00f000 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd  >................<
> +*
> +010000
> --
> 2.49.0
>
>

Re: [PATCH v3] fstests: btrfs: add a new test case to verify compressed read

[Zorro Lang]

On Wed, Aug 27, 2025 at 11:12:50AM +0930, Qu Wenruo wrote:
> The new test case is a regression test related to the block size < page
> size handling of compressed read.
> 
> The test case will only be triggered with 64K page size and 4K btrfs
> block size.
> I'm using aarch64 with 64K page size to trigger the regression.
> 
> The test case will create the following file layout:
> 
>   base:
>   [0, 64K): Single compressed data extent at bytenr X.
> 
>   new:
>   [0, 32K): Reflinked from base [32K, 64K)
>   [32K, 60K): Reflinked from base [0, 28K)
>   [60K, 64K): New 4K write
> 
>   The range [0, 32K) and [32K, 64K) are pointing to the same compressed
>   data.
> 
>   The last 4K write is a special workaround. It is a block aligned
>   write, thus it will create the folio but without reading out the
>   remaing part.
> 
>   This is to avoid readahead path, which has the proper fix.
>   We want single folio read without readahead.
> 
> Then output the file "new" just after the last 4K write, then cycle
> mount and output the content again.
> 
> For patched kernel, or with 4K page sized system, the test will pass,
> the resulted content will not change during mount cycles.
> 
> For unpatched kernel and with 64K page size, the test will fail, the
> content after the write will be incorrect (the range [32K, 60K) will be
> zero), but after a mount cycle the content is correct again.
> 
> Signed-off-by: Qu Wenruo <wqu@suse.com>
> ---
> Changelog:
> v3:
> - Fix the golden output which is generated by an unpatched kernel
> 
> v2:
> - Remove the unnecessary sync inherited from the kernel fix
> - Use _hexdump instead of open-coded od dumps
> - Use the correct 'clone' group instead of 'reflink'
> - Minor grammar fixes
>   All thanks to Filipe.
> ---

Hi Qu,

This patch is good to me, just a few picky points below:

>  tests/btrfs/337     | 55 +++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/337.out | 23 +++++++++++++++++++
>  2 files changed, 78 insertions(+)
>  create mode 100755 tests/btrfs/337
>  create mode 100644 tests/btrfs/337.out
> 
> diff --git a/tests/btrfs/337 b/tests/btrfs/337
> new file mode 100755
> index 00000000..9c409e4d
> --- /dev/null
> +++ b/tests/btrfs/337
> @@ -0,0 +1,55 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2025 SUSE Linux Products GmbH.  All Rights Reserved.
> +#
> +# FS QA Test 337
> +#
> +# Test compressed read with shared extents, especially for bs < ps cases.
> +#
> +. ./common/preamble
> +_begin_fstest auto quick compress clone
> +
> +_fixed_by_kernel_commit xxxxxxxxxxxx \
> +	"btrfs: fix corruption reading compressed range when block size is smaller than page size"
> +
> +. ./common/filter

Looks like you didn't use any helpers of common/filter in this case :)

> +. ./common/reflink
> +
> +_require_btrfs_support_sectorsize 4096
> +_require_scratch_reflink
> +
> +# The layout used in the test case is all 4K based, and can only be reproduced
> +# with page size larger than 4K.
> +_scratch_mkfs -s 4k >> $seqres.full

 || _fail "...."

Fail the test if the mkfs fails.

> +_scratch_mount "-o compress"
> +
> +# Create the reflink source, which must be a compressed extent.
> +$XFS_IO_PROG -f -c "pwrite -S 0x0f 0 32K" \
> +		-c "pwrite -S 0xf0 32K 32K" \
> +		$SCRATCH_MNT/base >> $seqres.full
> +echo "Reflink source:"
> +_hexdump $SCRATCH_MNT/base
> +
> +# Create the reflink dest, which reverses the order of the two 32K ranges.
> +#
> +# And do a further aligned write into the last block.
> +# This write is to make sure the folio exists in filemap, so that we won't go
> +# through the readahead path (which has the proper handling) for the folio.
> +$XFS_IO_PROG -f -c "reflink $SCRATCH_MNT/base 32K 0 32K" \
> +		-c "reflink $SCRATCH_MNT/base 0 32K 32K" \
> +		-c "pwrite 60K 4K" $SCRATCH_MNT/new >> $seqres.full
> +
> +# This will result an incorrect output for unpatched kernel.
> +# The range [32K, 60K) will be zero due to incorrectly merged compressed read.
> +echo "Before mount cycle:"
> +_hexdump $SCRATCH_MNT/new
> +
> +_scratch_cycle_mount
> +
> +# This will go through readahead path, which has the proper handling, thus give
> +# the correct content.
> +echo "After mount cycle:"
> +_hexdump $SCRATCH_MNT/new
> +
> +status=0
   ^^^
"_exit 0" does "status=0", so you can save this line.

Others looks good to me, with above changes:

Reviewed-by: Zorro Lang <zlang@redhat.com>

> +_exit 0
> diff --git a/tests/btrfs/337.out b/tests/btrfs/337.out
> new file mode 100644
> index 00000000..cecbbbcf
> --- /dev/null
> +++ b/tests/btrfs/337.out
> @@ -0,0 +1,23 @@
> +QA output created by 337
> +Reflink source:
> +000000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
> +*
> +008000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
> +*
> +010000
> +Before mount cycle:
> +000000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
> +*
> +008000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
> +*
> +00f000 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd  >................<
> +*
> +010000
> +After mount cycle:
> +000000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
> +*
> +008000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
> +*
> +00f000 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd  >................<
> +*
> +010000
> -- 
> 2.49.0
> 
> 

Re: [PATCH v3] fstests: btrfs: add a new test case to verify compressed read

[Zorro Lang]

On Thu, Aug 28, 2025 at 12:30:10AM +0800, Zorro Lang wrote:
> On Wed, Aug 27, 2025 at 11:12:50AM +0930, Qu Wenruo wrote:
> > The new test case is a regression test related to the block size < page
> > size handling of compressed read.
> > 
> > The test case will only be triggered with 64K page size and 4K btrfs
> > block size.
> > I'm using aarch64 with 64K page size to trigger the regression.
> > 
> > The test case will create the following file layout:
> > 
> >   base:
> >   [0, 64K): Single compressed data extent at bytenr X.
> > 
> >   new:
> >   [0, 32K): Reflinked from base [32K, 64K)
> >   [32K, 60K): Reflinked from base [0, 28K)
> >   [60K, 64K): New 4K write
> > 
> >   The range [0, 32K) and [32K, 64K) are pointing to the same compressed
> >   data.
> > 
> >   The last 4K write is a special workaround. It is a block aligned
> >   write, thus it will create the folio but without reading out the
> >   remaing part.
> > 
> >   This is to avoid readahead path, which has the proper fix.
> >   We want single folio read without readahead.
> > 
> > Then output the file "new" just after the last 4K write, then cycle
> > mount and output the content again.
> > 
> > For patched kernel, or with 4K page sized system, the test will pass,
> > the resulted content will not change during mount cycles.
> > 
> > For unpatched kernel and with 64K page size, the test will fail, the
> > content after the write will be incorrect (the range [32K, 60K) will be
> > zero), but after a mount cycle the content is correct again.
> > 
> > Signed-off-by: Qu Wenruo <wqu@suse.com>
> > ---
> > Changelog:
> > v3:
> > - Fix the golden output which is generated by an unpatched kernel
> > 
> > v2:
> > - Remove the unnecessary sync inherited from the kernel fix
> > - Use _hexdump instead of open-coded od dumps
> > - Use the correct 'clone' group instead of 'reflink'
> > - Minor grammar fixes
> >   All thanks to Filipe.
> > ---
> 
> Hi Qu,
> 
> This patch is good to me, just a few picky points below:
> 
> >  tests/btrfs/337     | 55 +++++++++++++++++++++++++++++++++++++++++++++
> >  tests/btrfs/337.out | 23 +++++++++++++++++++
> >  2 files changed, 78 insertions(+)
> >  create mode 100755 tests/btrfs/337
> >  create mode 100644 tests/btrfs/337.out
> > 
> > diff --git a/tests/btrfs/337 b/tests/btrfs/337
> > new file mode 100755
> > index 00000000..9c409e4d
> > --- /dev/null
> > +++ b/tests/btrfs/337
> > @@ -0,0 +1,55 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2025 SUSE Linux Products GmbH.  All Rights Reserved.
> > +#
> > +# FS QA Test 337
> > +#
> > +# Test compressed read with shared extents, especially for bs < ps cases.
> > +#
> > +. ./common/preamble
> > +_begin_fstest auto quick compress clone
> > +
> > +_fixed_by_kernel_commit xxxxxxxxxxxx \
> > +	"btrfs: fix corruption reading compressed range when block size is smaller than page size"
> > +
> > +. ./common/filter
> 
> Looks like you didn't use any helpers of common/filter in this case :)
> 
> > +. ./common/reflink
> > +
> > +_require_btrfs_support_sectorsize 4096
> > +_require_scratch_reflink
> > +
> > +# The layout used in the test case is all 4K based, and can only be reproduced
> > +# with page size larger than 4K.
> > +_scratch_mkfs -s 4k >> $seqres.full
> 
>  || _fail "...."
> 
> Fail the test if the mkfs fails.
> 
> > +_scratch_mount "-o compress"
> > +
> > +# Create the reflink source, which must be a compressed extent.
> > +$XFS_IO_PROG -f -c "pwrite -S 0x0f 0 32K" \
> > +		-c "pwrite -S 0xf0 32K 32K" \
> > +		$SCRATCH_MNT/base >> $seqres.full
> > +echo "Reflink source:"
> > +_hexdump $SCRATCH_MNT/base
> > +
> > +# Create the reflink dest, which reverses the order of the two 32K ranges.
> > +#
> > +# And do a further aligned write into the last block.
> > +# This write is to make sure the folio exists in filemap, so that we won't go
> > +# through the readahead path (which has the proper handling) for the folio.
> > +$XFS_IO_PROG -f -c "reflink $SCRATCH_MNT/base 32K 0 32K" \
> > +		-c "reflink $SCRATCH_MNT/base 0 32K 32K" \
> > +		-c "pwrite 60K 4K" $SCRATCH_MNT/new >> $seqres.full
> > +
> > +# This will result an incorrect output for unpatched kernel.
> > +# The range [32K, 60K) will be zero due to incorrectly merged compressed read.
> > +echo "Before mount cycle:"
> > +_hexdump $SCRATCH_MNT/new
> > +
> > +_scratch_cycle_mount
> > +
> > +# This will go through readahead path, which has the proper handling, thus give
> > +# the correct content.
> > +echo "After mount cycle:"
> > +_hexdump $SCRATCH_MNT/new
> > +
> > +status=0
>    ^^^
> "_exit 0" does "status=0", so you can save this line.
> 
> Others looks good to me, with above changes:
> 
> Reviewed-by: Zorro Lang <zlang@redhat.com>

These're simple enough changes, I've helped to change them, you don't need to
send one more version (except you hope to change more, please tell me :)

Thanks,
Zorro

> 
> > +_exit 0
> > diff --git a/tests/btrfs/337.out b/tests/btrfs/337.out
> > new file mode 100644
> > index 00000000..cecbbbcf
> > --- /dev/null
> > +++ b/tests/btrfs/337.out
> > @@ -0,0 +1,23 @@
> > +QA output created by 337
> > +Reflink source:
> > +000000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
> > +*
> > +008000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
> > +*
> > +010000
> > +Before mount cycle:
> > +000000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
> > +*
> > +008000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
> > +*
> > +00f000 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd  >................<
> > +*
> > +010000
> > +After mount cycle:
> > +000000 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0 f0  >................<
> > +*
> > +008000 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f 0f  >................<
> > +*
> > +00f000 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd  >................<
> > +*
> > +010000
> > -- 
> > 2.49.0
> > 
> >