From: Eric Sandeen <sandeen@redhat.com>
To: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Cc: linux-btrfs@vger.kernel.org, chris.mason@fusionio.com
Subject: Re: [PATCH] Btrfs-progs: check out if the swap device
Date: Tue, 12 Feb 2013 11:55:52 -0600 [thread overview]
Message-ID: <511A8228.9060109@redhat.com> (raw)
In-Reply-To: <5119D813.40101@jp.fujitsu.com>
On 2/11/13 11:50 PM, Tsutomu Itoh wrote:
> Hi, Eric,
>
> Thanks for your comment.
>
> On 2013/02/12 13:22, Eric Sandeen wrote:
>> On 2/11/13 7:25 PM, Tsutomu Itoh wrote:
>>> Currently, the following commands succeed.
>>>
>>> # cat /proc/swaps
>>> Filename Type Size Used Priority
>>> /dev/sda3 partition 8388604 0 -1
>>> /dev/sdc8 partition 9765884 0 -2
>>> # mkfs.btrfs /dev/sdc8
>>>
>>> WARNING! - Btrfs v0.20-rc1-165-g82ac345 IS EXPERIMENTAL
>>> WARNING! - see http://btrfs.wiki.kernel.org before using
>>>
>>> fs created label (null) on /dev/sdc8
>>> nodesize 4096 leafsize 4096 sectorsize 4096 size 9.31GB
>>> Btrfs v0.20-rc1-165-g82ac345
>>> # btrfs fi sh /dev/sdc8
>>> Label: none uuid: fc0bdbd0-7eed-460f-b4e9-131273b66df2
>>> Total devices 1 FS bytes used 28.00KB
>>> devid 1 size 9.31GB used 989.62MB path /dev/sdc8
>>>
>>> Btrfs v0.20-rc1-165-g82ac345
>>> #
>>>
>>> But we should check out the swap device. So fixed it.
>>
>> I guess it's nice to parse /proc/swaps to be able to offer the
>
>> helpful error message in this case. (though I wonder how long
>> /proc/swaps will be available, and in this format? Does it count
>> as ABI?)
>
> Umm, I don't know how long /proc/swaps will be available, too...
I guess it is good enough for e2fsprogs :)
>>
>> Your implementation looks just like the one in e2fsprogs, so it should
>> work fine.
>
> Yes.
>
>>
>> But I also wonder if overall it would be safest to open the device O_EXCL,
>> which would fail with EBUSY if it were in use for swap, or mounted,
>> or opened O_EXCL by another process for any other reason:
>
> But details of the error cannot be notified when O_EXCL is used. and,
> after is_swap_device(), check_mounted() check state of the mount or not.
>
> So, I chose this one. (read /proc/swaps)
Sure, I think your change is good. I just think perhaps mkfs should also try
to open O_EXCL after all those other tests, as a last safety check.
I can take a look at the code & send that patch if it seems to make sense.
Thanks,
-Eric
> Thanks,
> Tsutomu
>
>>
>> [root@host tmp]# cat /proc/swaps
>> Filename Type Size Used Priority
>> /dev/sda3 partition 2048280 822616 -1
>>
>> [root@host tmp]# strace -e open ./test
>> open("/etc/ld.so.cache", O_RDONLY) = 3
>> open("/lib64/libc.so.6", O_RDONLY) = 3
>> open("/dev/sda3", O_RDWR|O_EXCL) = -1 EBUSY (Device or resource busy)
>> open: Device or resource busy
>>
>> -Eric
>>
>>> Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
>>> ---
>>> (this patch is based on Chris's raid56-experimental branch)
>>> ---
>>> mkfs.c | 18 ++++++++++++++++++
>>> utils.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
>>> utils.h | 1 +
>>> 3 files changed, 68 insertions(+)
>>>
>>> diff --git a/mkfs.c b/mkfs.c
>>> index 2d3c2af..fdc3373 100644
>>> --- a/mkfs.c
>>> +++ b/mkfs.c
>>> @@ -1366,6 +1366,15 @@ int main(int ac, char **av)
>>>
>>> if (source_dir == 0) {
>>> file = av[optind++];
>>> + ret = is_swap_device(file);
>>> + if (ret < 0) {
>>> + fprintf(stderr, "error checking %s status\n", file);
>>> + exit(1);
>>> + }
>>> + if (ret == 1) {
>>> + fprintf(stderr, "%s is a swap device\n", file);
>>> + exit(1);
>>> + }
>>> ret = check_mounted(file);
>>> if (ret < 0) {
>>> fprintf(stderr, "error checking %s mount status\n", file);
>>> @@ -1461,6 +1470,15 @@ int main(int ac, char **av)
>>> int old_mixed = mixed;
>>>
>>> file = av[optind++];
>>> + ret = is_swap_device(file);
>>> + if (ret < 0) {
>>> + fprintf(stderr, "error checking %s status\n", file);
>>> + exit(1);
>>> + }
>>> + if (ret == 1) {
>>> + fprintf(stderr, "%s is a swap device\n", file);
>>> + exit(1);
>>> + }
>>> ret = check_mounted(file);
>>> if (ret < 0) {
>>> fprintf(stderr, "error checking %s mount status\n",
>>> diff --git a/utils.c b/utils.c
>>> index f9ee812..0c551a0 100644
>>> --- a/utils.c
>>> +++ b/utils.c
>>> @@ -1386,3 +1386,52 @@ int get_fs_info(int fd, char *path, struct btrfs_ioctl_fs_info_args *fi_args,
>>>
>>> return 0;
>>> }
>>> +
>>> +/*
>>> + * Checks if the swap device or not.
>>> + * Returns 1 if the swap device, < 0 on error or 0 if not the swap device.
>>> + */
>>> +int is_swap_device(const char *file)
>>> +{
>>> + FILE *f;
>>> + struct stat st_buf;
>>> + char buf[1024];
>>> + char *cp;
>>> + dev_t rdev;
>>> + int ret = 0;
>>> +
>>> + if (stat(file, &st_buf) < 0)
>>> + return -errno;
>>> + if (!S_ISBLK(st_buf.st_mode))
>>> + return 0;
>>> +
>>> + rdev = st_buf.st_rdev;
>>> +
>>> + if ((f = fopen("/proc/swaps", "r")) == NULL)
>>> + return -errno;
>>> +
>>> + /* skip the first line */
>>> + if (fgets(buf, sizeof(buf), f) == NULL)
>>> + goto out;
>>> +
>>> + while (fgets(buf, sizeof(buf), f) != NULL) {
>>> + if ((cp = strchr(buf, ' ')) != NULL)
>>> + *cp = 0;
>>> + if ((cp = strchr(buf, '\t')) != NULL)
>>> + *cp = 0;
>>> + if (strcmp(file, buf) == 0) {
>>> + ret = 1;
>>> + break;
>>> + }
>>> + if ((stat(buf, &st_buf) == 0) && S_ISBLK(st_buf.st_mode) &&
>>> + rdev == st_buf.st_rdev) {
>>> + ret = 1;
>>> + break;
>>> + }
>>> + }
>>> +
>>> +out:
>>> + fclose(f);
>>> +
>>> + return ret;
>>> +}
>>> diff --git a/utils.h b/utils.h
>>> index bbcaf6a..60a0fea 100644
>>> --- a/utils.h
>>> +++ b/utils.h
>>> @@ -55,6 +55,7 @@ int get_fs_info(int fd, char *path, struct btrfs_ioctl_fs_info_args *fi_args,
>>> struct btrfs_ioctl_dev_info_args **di_ret);
>>>
>>> char *__strncpy__null(char *dest, const char *src, size_t n);
>>> +int is_swap_device(const char *file);
>>> /* Helper to always get proper size of the destination string */
>>> #define strncpy_null(dest, src) __strncpy__null(dest, src, sizeof(dest))
>>>
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>
>
next prev parent reply other threads:[~2013-02-12 17:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-12 1:25 [PATCH] Btrfs-progs: check out if the swap device Tsutomu Itoh
2013-02-12 4:22 ` Eric Sandeen
2013-02-12 5:50 ` Tsutomu Itoh
2013-02-12 17:55 ` Eric Sandeen [this message]
2013-02-12 20:57 ` Zach Brown
2013-02-13 4:38 ` Tsutomu Itoh
2013-02-13 21:58 ` Zach Brown
2013-02-14 0:03 ` Tsutomu Itoh
2013-02-14 5:35 ` Zach Brown
2013-02-12 15:06 ` David Sterba
2013-02-12 18:14 ` Goffredo Baroncelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=511A8228.9060109@redhat.com \
--to=sandeen@redhat.com \
--cc=chris.mason@fusionio.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=t-itoh@jp.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox