Problem with Btrsf

Problem with Btrsf

[Régis Priqueler]

[-- Attachment #1: Type: text/plain, Size: 1619 bytes --]

Hi,

My system is an synology with a SHR array of 3 2Tb WD Red (WD40EFAX) whish seems to be a SMR .

The filesystem has gone to read only this afternoon (without any modification of the NAS).

Synology says that the disks are not compatible because of SMR.

As I wanted to be sure I browse the logs and found that there's some errors

In dmesg

some BTRFS critical (device dm-0): leaf bad key order, block=2717818945536, root=2, slot=41

then

2020-12-01T13:50:28+01:00 MediasHomeBase kernel: [5372093.750621] BTRFS: error (device dm-0) in btrfs_start_dirty_block_groups:4004: errno=-5 IO failure
2020-12-01T13:50:28+01:00 MediasHomeBase kernel: [5372093.766864] BTRFS warning (device dm-0): Skipping commit of aborted transaction.
2020-12-01T13:50:28+01:00 MediasHomeBase kernel: [5372093.775340] BTRFS: error (device dm-0) in cleanup_transaction:2032: errno=-5 IO failure
2020-12-01T14:50:35+01:00 MediasHomeBase kernel: [5375701.176237] nr_pdflush_threads exported in /proc is scheduled for removal

I'm not very familliar with BTRFS

Is there a way to repair this problem ?

Best regards,

Infos:

Linux MediasHomeBase 4.4.59+ #25426 SMP PREEMPT Wed Jul 8 03:21:29 CST 2020 x86_64 GNU/Linux synology_apollolake_1019+
btrfs-progs v4.0
Label: '2020.09.17-15:40:50 v25426'  uuid: aae48b56-d453-4dfb-b5dd-3af62e923686
     Total devices 1 FS bytes used 2.22TiB
     devid    1 size 7.27TiB used 2.52TiB path /dev/mapper/vg1000-lv

Data, single: total=2.46TiB, used=2.22TiB
System, DUP: total=8.00MiB, used=64.00KiB
Metadata, DUP: total=28.50GiB, used=2.64GiB
GlobalReserve, single: total=2.00GiB, used=0.00B


[-- Attachment #2: dmesg.log --]
[-- Type: text/plain, Size: 132518 bytes --]

[5113976.838753] ata5: wake up successful, the reset fail can be ignored
[5113976.846092] ata5.00: Enabling discard_zeroes_data
[5113979.887711] ata2: wake up from deepsleep, reset link now
[5113980.009022] ata2: device plugged sstatus 0x133
[5113988.369185] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5113988.377962] ata2.00: configured for UDMA/133
[5113988.382964] ata2: wake up successful, the reset fail can be ignored
[5121121.131650] ata3: wake up from deepsleep, reset link now
[5121121.131701] ata5: wake up from deepsleep, reset link now
[5121121.133930] ata4: wake up from deepsleep, reset link now
[5121121.546429] ata5: device plugged sstatus 0x133
[5121121.551626] ata4: device plugged sstatus 0x133
[5121121.564798] ata3: device plugged sstatus 0x133
[5121127.419247] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5121127.427428] ata4.00: configured for UDMA/133
[5121127.432422] ata4: wake up successful, the reset fail can be ignored
[5121127.439628] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5121127.439834] ata4.00: Enabling discard_zeroes_data
[5121127.453291] ata5.00: configured for UDMA/133
[5121127.458277] ata5: wake up successful, the reset fail can be ignored
[5121127.465597] ata5.00: Enabling discard_zeroes_data
[5121127.512259] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5121127.520467] ata3.00: configured for UDMA/133
[5121127.525475] ata3: wake up successful, the reset fail can be ignored
[5121127.533018] ata3.00: Enabling discard_zeroes_data
[5121130.595412] ata2: wake up from deepsleep, reset link now
[5121130.716622] ata2: device plugged sstatus 0x133
[5121139.185888] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5121139.194239] ata2.00: configured for UDMA/133
[5121139.199233] ata2: wake up successful, the reset fail can be ignored
[5122643.086591] ata3: wake up from deepsleep, reset link now
[5122643.086633] ata4: wake up from deepsleep, reset link now
[5122643.089467] ata5: wake up from deepsleep, reset link now
[5122643.500056] ata4: device plugged sstatus 0x133
[5122643.505258] ata5: device plugged sstatus 0x133
[5122643.520122] ata3: device plugged sstatus 0x133
[5122649.406781] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5122649.415012] ata4.00: configured for UDMA/133
[5122649.420042] ata4: wake up successful, the reset fail can be ignored
[5122649.427431] ata4.00: Enabling discard_zeroes_data
[5122649.518791] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5122649.527049] ata3.00: configured for UDMA/133
[5122649.532079] ata3: wake up successful, the reset fail can be ignored
[5122649.539492] ata3.00: Enabling discard_zeroes_data
[5122649.616805] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5122649.625028] ata5.00: configured for UDMA/133
[5122649.630022] ata5: wake up successful, the reset fail can be ignored
[5122649.648429] ata5.00: Enabling discard_zeroes_data
[5122652.659958] ata2: wake up from deepsleep, reset link now
[5122652.781889] ata2: device plugged sstatus 0x133
[5122661.085429] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5122661.093823] ata2.00: configured for UDMA/133
[5122661.098815] ata2: wake up successful, the reset fail can be ignored
[5125056.211203] ata3: wake up from deepsleep, reset link now
[5125056.211249] ata4: wake up from deepsleep, reset link now
[5125056.211277] ata5: wake up from deepsleep, reset link now
[5125056.625563] ata4: device plugged sstatus 0x133
[5125056.630770] ata5: device plugged sstatus 0x133
[5125056.644454] ata3: device plugged sstatus 0x133
[5125062.515381] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5125062.524030] ata4.00: configured for UDMA/133
[5125062.529049] ata4: wake up successful, the reset fail can be ignored
[5125062.536411] ata4.00: Enabling discard_zeroes_data
[5125062.557406] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5125062.566003] ata3.00: configured for UDMA/133
[5125062.570995] ata3: wake up successful, the reset fail can be ignored
[5125062.578697] ata3.00: Enabling discard_zeroes_data
[5125062.617392] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5125062.625586] ata5.00: configured for UDMA/133
[5125062.630589] ata5: wake up successful, the reset fail can be ignored
[5125062.638156] ata5.00: Enabling discard_zeroes_data
[5125065.665548] ata2: wake up from deepsleep, reset link now
[5125065.787137] ata2: device plugged sstatus 0x133
[5125074.091015] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5125074.099364] ata2.00: configured for UDMA/133
[5125074.104368] ata2: wake up successful, the reset fail can be ignored
[5128509.335168] ata3: wake up from deepsleep, reset link now
[5128509.335218] ata5: wake up from deepsleep, reset link now
[5128509.343959] ata4: wake up from deepsleep, reset link now
[5128509.750015] ata5: device plugged sstatus 0x133
[5128509.756806] ata4: device plugged sstatus 0x133
[5128509.768340] ata3: device plugged sstatus 0x131
[5128515.657285] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5128515.665487] ata3.00: configured for UDMA/133
[5128515.670476] ata3: wake up successful, the reset fail can be ignored
[5128515.677818] ata3.00: Enabling discard_zeroes_data
[5128515.749291] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5128515.757511] ata4.00: configured for UDMA/133
[5128515.762499] ata4: wake up successful, the reset fail can be ignored
[5128515.769845] ata4.00: Enabling discard_zeroes_data
[5128515.895305] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5128515.903507] ata5.00: configured for UDMA/133
[5128515.908492] ata5: wake up successful, the reset fail can be ignored
[5128515.915798] ata5.00: Enabling discard_zeroes_data
[5128518.952457] ata2: wake up from deepsleep, reset link now
[5128519.073713] ata2: device plugged sstatus 0x133
[5128527.433941] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5128527.442296] ata2.00: configured for UDMA/133
[5128527.447310] ata2: wake up successful, the reset fail can be ignored
[5132355.621604] ata3: wake up from deepsleep, reset link now
[5132355.621640] ata4: wake up from deepsleep, reset link now
[5132355.622429] ata5: wake up from deepsleep, reset link now
[5132356.034565] ata4: device plugged sstatus 0x133
[5132356.039764] ata5: device plugged sstatus 0x133
[5132356.054867] ata3: device plugged sstatus 0x133
[5132361.891770] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5132361.899999] ata4.00: configured for UDMA/133
[5132361.905021] ata4: wake up successful, the reset fail can be ignored
[5132361.912370] ata4.00: Enabling discard_zeroes_data
[5132361.964773] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5132361.972960] ata3.00: configured for UDMA/133
[5132361.977975] ata3: wake up successful, the reset fail can be ignored
[5132361.985211] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5132361.985294] ata3.00: Enabling discard_zeroes_data
[5132361.998923] ata5.00: configured for UDMA/133
[5132362.003917] ata5: wake up successful, the reset fail can be ignored
[5132362.011248] ata5.00: Enabling discard_zeroes_data
[5132365.121942] ata2: wake up from deepsleep, reset link now
[5132365.243353] ata2: device plugged sstatus 0x133
[5132373.547410] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5132373.555777] ata2.00: configured for UDMA/133
[5132373.560776] ata2: wake up successful, the reset fail can be ignored
[5138653.263029] ata3: wake up from deepsleep, reset link now
[5138653.263087] ata4: wake up from deepsleep, reset link now
[5138653.263120] ata5: wake up from deepsleep, reset link now
[5138653.676045] ata4: device plugged sstatus 0x133
[5138653.681244] ata5: device plugged sstatus 0x133
[5138653.696178] ata3: device plugged sstatus 0x133
[5138659.541270] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5138659.549468] ata4.00: configured for UDMA/133
[5138659.554468] ata4: wake up successful, the reset fail can be ignored
[5138659.561802] ata4.00: Enabling discard_zeroes_data
[5138659.746287] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5138659.754494] ata5.00: configured for UDMA/133
[5138659.759479] ata5: wake up successful, the reset fail can be ignored
[5138659.766793] ata5.00: Enabling discard_zeroes_data
[5138659.840286] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5138659.848474] ata3.00: configured for UDMA/133
[5138659.853458] ata3: wake up successful, the reset fail can be ignored
[5138659.860787] ata3.00: Enabling discard_zeroes_data
[5138662.929448] ata2: wake up from deepsleep, reset link now
[5138663.050842] ata2: device plugged sstatus 0x133
[5138671.520925] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5138671.529322] ata2.00: configured for UDMA/133
[5138671.534318] ata2: wake up successful, the reset fail can be ignored
[5142601.914029] ata3: wake up from deepsleep, reset link now
[5142601.914070] ata5: wake up from deepsleep, reset link now
[5142601.914111] ata4: wake up from deepsleep, reset link now
[5142602.327016] ata4: device plugged sstatus 0x133
[5142602.332212] ata5: device plugged sstatus 0x133
[5142602.347223] ata3: device plugged sstatus 0x131
[5142608.172696] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5142608.180900] ata4.00: configured for UDMA/133
[5142608.185887] ata4: wake up successful, the reset fail can be ignored
[5142608.212901] ata4.00: Enabling discard_zeroes_data
[5142608.234702] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5142608.241859] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5142608.249737] ata5.00: configured for UDMA/133
[5142608.254733] ata5: wake up successful, the reset fail can be ignored
[5142608.262046] ata5.00: Enabling discard_zeroes_data
[5142608.267600] ata3.00: configured for UDMA/133
[5142608.272590] ata3: wake up successful, the reset fail can be ignored
[5142608.279983] ata3.00: Enabling discard_zeroes_data
[5142611.382923] ata2: wake up from deepsleep, reset link now
[5142611.504307] ata2: device plugged sstatus 0x133
[5142619.968355] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5142619.976874] ata2.00: configured for UDMA/133
[5142619.981888] ata2: wake up successful, the reset fail can be ignored
[5150524.918251] ata5: wake up from deepsleep, reset link now
[5150524.918295] ata3: wake up from deepsleep, reset link now
[5150524.920959] ata4: wake up from deepsleep, reset link now
[5150525.333073] ata3: device plugged sstatus 0x133
[5150525.338265] ata4: device plugged sstatus 0x133
[5150525.351445] ata5: device plugged sstatus 0x131
[5150531.209291] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5150531.217507] ata3.00: configured for UDMA/133
[5150531.222510] ata3: wake up successful, the reset fail can be ignored
[5150531.229758] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5150531.229934] ata3.00: Enabling discard_zeroes_data
[5150531.243396] ata4.00: configured for UDMA/133
[5150531.248414] ata4: wake up successful, the reset fail can be ignored
[5150531.255798] ata4.00: Enabling discard_zeroes_data
[5150531.403304] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5150531.411523] ata5.00: configured for UDMA/133
[5150531.416501] ata5: wake up successful, the reset fail can be ignored
[5150531.423843] ata5.00: Enabling discard_zeroes_data
[5150534.466455] ata2: wake up from deepsleep, reset link now
[5150534.587707] ata2: device plugged sstatus 0x133
[5150543.100941] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5150543.109314] ata2.00: configured for UDMA/133
[5150543.114317] ata2: wake up successful, the reset fail can be ignored
[5156632.708441] ata3: wake up from deepsleep, reset link now
[5156632.708486] ata4: wake up from deepsleep, reset link now
[5156632.708521] ata5: wake up from deepsleep, reset link now
[5156633.122716] ata4: device plugged sstatus 0x133
[5156633.127916] ata5: device plugged sstatus 0x133
[5156633.141581] ata3: device plugged sstatus 0x133
[5156638.941738] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5156638.950009] ata4.00: configured for UDMA/133
[5156638.955002] ata4: wake up successful, the reset fail can be ignored
[5156638.962334] ata4.00: Enabling discard_zeroes_data
[5156638.967844] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5156638.976070] ata5.00: configured for UDMA/133
[5156638.981082] ata5: wake up successful, the reset fail can be ignored
[5156638.988554] ata5.00: Enabling discard_zeroes_data
[5156639.086738] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5156639.094924] ata3.00: configured for UDMA/133
[5156639.099959] ata3: wake up successful, the reset fail can be ignored
[5156639.121471] ata3.00: Enabling discard_zeroes_data
[5156642.156902] ata2: wake up from deepsleep, reset link now
[5156642.278096] ata2: device plugged sstatus 0x133
[5156650.736384] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5156650.744739] ata2.00: configured for UDMA/133
[5156650.749734] ata2: wake up successful, the reset fail can be ignored
[5157697.022342] eth0: dirty_tx=3187643 cur_tx=3188650, NUM_TX_DESC=1024
[5157697.029545] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5157697.045964] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5157697.062382] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5157697.078808] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5157697.095235] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5157697.111655] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5157697.128073] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5157697.144488] eth0: TX queue state[11111111111111111111111111111111111111111122222222222222222111111111111111111111111111111111111111111111111111111111111111111111]
[5157697.460955]  Reinit 3 0 ALDPS 
[5157697.464579] 0xD6=0x70, check 0xD4=0
[5157697.468678] 0xD6=0x7A, check 0xD4=80
[5157697.472872] 0xD6=0x90, check 0xD4=80
[5157697.477448] ERI 0xDD=0x00, check 0xC2=0
[5157697.482315] ERI 0xDD=0x05, check 0xC2=67
[5157697.492261]  Reinit 1 8001 
[5157697.495577]  Reinit 2 1 
[5157697.498594] r8168_reset_task: reset with tx watchdog timeout
[5157699.342264] init: dhcp-client (eth0) main process (23793) killed by TERM signal
[5157700.060828] init: scsi_plugin_server main process (29508) killed by TERM signal
[5157701.148316] init: nmbd main process (29819) killed by TERM signal
[5157701.486961]  Reinit 1 8001 
[5157701.490282]  Reinit 2 1 
[5157701.503631] r8168: eth0: link up 1 Gbps
[5157702.790876] init: nmbd main process (30216) killed by TERM signal
[5157702.866991] init: dhcp-client (eth0) main process (29711) killed by TERM signal
[5157703.037409] init: iscsi_pluginserverd main process (29738) killed by TERM signal
[5157703.050177] init: iscsi_pluginengined main process (29737) killed by TERM signal
[5157703.090627] init: scsi_plugin_server main process (29741) killed by TERM signal
[5157704.637287] init: iscsi_pluginserverd main process (30507) killed by TERM signal
[5157704.654715] init: iscsi_pluginengined main process (30497) killed by TERM signal
[5157704.712263] init: scsi_plugin_server main process (30527) killed by TERM signal
[5157705.001453] init: iscsi_pluginserverd main process (31144) killed by TERM signal
[5157705.016106] init: iscsi_pluginengined main process (31139) killed by TERM signal
[5157705.066584] init: scsi_plugin_server main process (31156) killed by TERM signal
[5157753.841239] init: scsi_plugin_server main process (31321) killed by TERM signal
[5157754.101889] init: nmbd main process (805) killed by TERM signal
[5157754.623220] init: nmbd main process (965) killed by TERM signal
[5157755.567602] NET: Unregistered protocol family 15
[5157756.859635] init: iscsi_pluginserverd main process (690) killed by TERM signal
[5157757.279687] NET: Unregistered protocol family 24
[5157757.467322] PPP generic driver version 2.4.2
[5157757.505116] NET: Registered protocol family 24
[5157757.585720] PPP MPPE Compression module registered
[5157757.598280] PPP BSD Compression module registered
[5157757.628150] PPP Deflate Compression module registered
[5157757.651782] l2tp_core: L2TP core driver, V2.0
[5157757.665045] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5157757.693274] Initializing XFRM netlink socket
[5157757.722368] NET: Registered protocol family 15
[5157761.547232] init: iscsi_pluginengined main process (681) killed by KILL signal
[5157761.573312] init: scsi_plugin_server main process (709) killed by TERM signal
[5158044.292029] init: scsi_plugin_server main process (2087) killed by TERM signal
[5158044.654571] init: nmbd main process (4325) killed by TERM signal
[5158045.788679] NET: Unregistered protocol family 15
[5158046.970991] init: iscsi_pluginserverd main process (4335) killed by TERM signal
[5158046.981446] init: iscsi_pluginengined main process (4332) killed by TERM signal
[5158047.015160] init: scsi_plugin_server main process (4350) killed by TERM signal
[5158047.501875] NET: Unregistered protocol family 24
[5158047.594766] PPP generic driver version 2.4.2
[5158047.613532] NET: Registered protocol family 24
[5158047.669995] PPP MPPE Compression module registered
[5158047.682406] PPP BSD Compression module registered
[5158047.694982] PPP Deflate Compression module registered
[5158047.719401] l2tp_core: L2TP core driver, V2.0
[5158047.731781] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5158047.759128] Initializing XFRM netlink socket
[5158047.771656] NET: Registered protocol family 15
[5163516.336838] eth0: dirty_tx=531 cur_tx=1538, NUM_TX_DESC=1024
[5163516.343373] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5163516.359793] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5163516.376241] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5163516.392664] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5163516.409088] eth0: TX queue state[11222222222222222221111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5163516.425514] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5163516.441937] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5163516.458358] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5163516.774843]  Reinit 3 0 ALDPS 
[5163516.778471] 0xD6=0x70, check 0xD4=70
[5163516.782679] 0xD6=0x7A, check 0xD4=80
[5163516.786877] 0xD6=0x90, check 0xD4=80
[5163516.791455] ERI 0xDD=0x00, check 0xC2=0
[5163516.796324] ERI 0xDD=0x05, check 0xC2=67
[5163516.806276]  Reinit 1 8001 
[5163516.809594]  Reinit 2 1 
[5163516.812623] r8168_reset_task: reset with tx watchdog timeout
[5163516.821787] ata3: wake up from deepsleep, reset link now
[5163516.821832] ata4: wake up from deepsleep, reset link now
[5163516.821951] ata5: wake up from deepsleep, reset link now
[5163517.236074] ata4: device plugged sstatus 0x133
[5163517.241274] ata5: device plugged sstatus 0x133
[5163517.255029] ata3: device plugged sstatus 0x133
[5163518.155770] init: dhcp-client (eth0) main process (30411) killed by TERM signal
[5163519.830401]  Reinit 1 8001 
[5163519.833730]  Reinit 2 1 
[5163519.847114] r8168: eth0: link up 1 Gbps
[5163523.146243] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5163523.154922] ata5.00: configured for UDMA/133
[5163523.159938] ata5: wake up successful, the reset fail can be ignored
[5163523.167169] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5163523.167316] ata5.00: Enabling discard_zeroes_data
[5163523.180860] ata4.00: configured for UDMA/133
[5163523.185855] ata4: wake up successful, the reset fail can be ignored
[5163523.193083] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5163523.193184] ata4.00: Enabling discard_zeroes_data
[5163523.206744] ata3.00: configured for UDMA/133
[5163523.211735] ata3: wake up successful, the reset fail can be ignored
[5163523.219058] ata3.00: Enabling discard_zeroes_data
[5163524.114770] init: scsi_plugin_server main process (4958) killed by TERM signal
[5163524.366590] init: nmbd main process (8235) killed by TERM signal
[5163525.176899] init: dhcp-client (eth0) main process (8010) killed by TERM signal
[5163525.672562] init: iscsi_pluginserverd main process (8240) killed by TERM signal
[5163525.696863] init: iscsi_pluginengined main process (8228) killed by TERM signal
[5163525.772979] init: scsi_plugin_server main process (8247) killed by TERM signal
[5163526.765456] ata2: wake up from deepsleep, reset link now
[5163526.886971] ata2: device plugged sstatus 0x133
[5163527.052798] init: nmbd main process (8822) killed by TERM signal
[5163528.205126] init: iscsi_pluginserverd main process (8701) killed by TERM signal
[5163528.222194] init: iscsi_pluginengined main process (8686) killed by TERM signal
[5163528.336037] init: scsi_plugin_server main process (8712) killed by TERM signal
[5163528.734659] init: nmbd main process (9443) killed by TERM signal
[5163531.263717] init: iscsi_pluginserverd main process (9418) killed by TERM signal
[5163531.275253] init: iscsi_pluginengined main process (9405) killed by TERM signal
[5163531.324474] init: scsi_plugin_server main process (9431) killed by TERM signal
[5163535.339910] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5163535.348276] ata2.00: configured for UDMA/133
[5163535.353520] ata2: wake up successful, the reset fail can be ignored
[5163577.398319] init: scsi_plugin_server main process (10025) killed by TERM signal
[5163578.947295] NET: Unregistered protocol family 15
[5163580.347645] init: iscsi_pluginserverd main process (10863) killed by TERM signal
[5163580.358012] init: iscsi_pluginengined main process (10860) killed by TERM signal
[5163580.387857] init: scsi_plugin_server main process (10875) killed by TERM signal
[5163580.676400] NET: Unregistered protocol family 24
[5163580.816272] PPP generic driver version 2.4.2
[5163580.835082] NET: Registered protocol family 24
[5163580.894020] PPP MPPE Compression module registered
[5163580.906835] PPP BSD Compression module registered
[5163580.919315] PPP Deflate Compression module registered
[5163580.943318] l2tp_core: L2TP core driver, V2.0
[5163580.955869] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5163580.983586] Initializing XFRM netlink socket
[5163580.996757] NET: Registered protocol family 15
[5170174.706993] eth0: dirty_tx=724 cur_tx=1731, NUM_TX_DESC=1024
[5170174.713528] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5170174.729955] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5170174.746392] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5170174.762814] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5170174.779241] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5170174.795675] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111112222222222222222211111111111111111111111111111111111111111111]
[5170174.812103] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5170174.828528] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5170175.145021]  Reinit 3 0 ALDPS 
[5170175.148642] 0xD6=0x70, check 0xD4=0
[5170175.152746] 0xD6=0x7A, check 0xD4=80
[5170175.156945] 0xD6=0x90, check 0xD4=80
[5170175.161519] ERI 0xDD=0x00, check 0xC2=0
[5170175.166389] ERI 0xDD=0x05, check 0xC2=67
[5170175.176340]  Reinit 1 8001 
[5170175.179659]  Reinit 2 1 
[5170175.182683] r8168_reset_task: reset with tx watchdog timeout
[5170175.192179] ata3: wake up from deepsleep, reset link now
[5170175.192230] ata4: wake up from deepsleep, reset link now
[5170175.192260] ata5: wake up from deepsleep, reset link now
[5170175.605009] ata4: device plugged sstatus 0x133
[5170175.610210] ata5: device plugged sstatus 0x133
[5170175.630340] ata3: device plugged sstatus 0x131
[5170176.608553] init: dhcp-client (eth0) main process (8576) killed by TERM signal
[5170177.270423] init: scsi_plugin_server main process (11497) killed by TERM signal
[5170178.518576]  Reinit 1 8001 
[5170178.521904]  Reinit 2 1 
[5170178.535288] r8168: eth0: link up 1 Gbps
[5170180.223046] init: iscsi_pluginserverd main process (15697) killed by TERM signal
[5170180.234879] init: iscsi_pluginengined main process (15696) killed by TERM signal
[5170180.281799] init: scsi_plugin_server main process (15699) killed by TERM signal
[5170181.431390] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5170181.439622] ata4.00: configured for UDMA/133
[5170181.444615] ata4: wake up successful, the reset fail can be ignored
[5170181.451958] ata4.00: Enabling discard_zeroes_data
[5170181.581402] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5170181.589582] ata5.00: configured for UDMA/133
[5170181.594617] ata5: wake up successful, the reset fail can be ignored
[5170181.602016] ata5.00: Enabling discard_zeroes_data
[5170181.626405] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5170181.634637] ata3.00: configured for UDMA/133
[5170181.639636] ata3: wake up successful, the reset fail can be ignored
[5170181.647000] ata3.00: Enabling discard_zeroes_data
[5170182.381736] init: nmbd main process (16030) killed by TERM signal
[5170182.926920] init: dhcp-client (eth0) main process (15891) killed by TERM signal
[5170183.387309] init: iscsi_pluginserverd main process (15858) terminated with status 255
[5170183.396563] init: iscsi_pluginserverd main process ended, respawning
[5170184.686616] ata2: wake up from deepsleep, reset link now
[5170184.807807] ata2: device plugged sstatus 0x133
[5170185.474265] init: iscsi_pluginserverd main process (16385) killed by TERM signal
[5170185.586339] init: scsi_plugin_server main process (15860) killed by TERM signal
[5170188.784744] init: scsi_plugin_server main process (16950) killed by TERM signal
[5170193.148045] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5170193.156437] ata2.00: configured for UDMA/133
[5170193.161528] ata2: wake up successful, the reset fail can be ignored
[5172461.063328] ata3: wake up from deepsleep, reset link now
[5172461.063426] ata5: wake up from deepsleep, reset link now
[5172461.070133] ata4: wake up from deepsleep, reset link now
[5172461.477700] ata5: device plugged sstatus 0x133
[5172461.483321] ata4: device plugged sstatus 0x131
[5172461.496628] ata3: device plugged sstatus 0x131
[5172467.490799] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5172467.499001] ata4.00: configured for UDMA/133
[5172467.504011] ata4: wake up successful, the reset fail can be ignored
[5172467.511343] ata4.00: Enabling discard_zeroes_data
[5172467.543801] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5172467.551979] ata3.00: configured for UDMA/133
[5172467.556985] ata3: wake up successful, the reset fail can be ignored
[5172467.564286] ata3.00: Enabling discard_zeroes_data
[5172467.570800] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5172467.579015] ata5.00: configured for UDMA/133
[5172467.584008] ata5: wake up successful, the reset fail can be ignored
[5172467.591325] ata5.00: Enabling discard_zeroes_data
[5172471.015996] ata2: wake up from deepsleep, reset link now
[5172471.138152] ata2: device plugged sstatus 0x133
[5172471.693135] init: scsi_plugin_server main process (17422) killed by TERM signal
[5172473.445440] init: nmbd main process (21628) killed by TERM signal
[5172473.955186] NET: Unregistered protocol family 15
[5172474.156692] init: iscsi_pluginserverd main process (21354) killed by TERM signal
[5172474.169519] init: iscsi_pluginengined main process (21340) killed by TERM signal
[5172474.306738] init: scsi_plugin_server main process (21368) killed by TERM signal
[5172476.339275] NET: Unregistered protocol family 24
[5172476.504476] PPP generic driver version 2.4.2
[5172476.542768] NET: Registered protocol family 24
[5172476.664348] PPP MPPE Compression module registered
[5172476.685994] PPP BSD Compression module registered
[5172476.707474] PPP Deflate Compression module registered
[5172476.754144] l2tp_core: L2TP core driver, V2.0
[5172476.776233] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5172476.832586] Initializing XFRM netlink socket
[5172476.855536] NET: Registered protocol family 15
[5172479.460466] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5172479.468879] ata2.00: configured for UDMA/133
[5172479.473873] ata2: wake up successful, the reset fail can be ignored
[5174654.254527] ata3: wake up from deepsleep, reset link now
[5174654.254593] ata5: wake up from deepsleep, reset link now
[5174654.254627] ata4: wake up from deepsleep, reset link now
[5174654.669077] ata4: device plugged sstatus 0x133
[5174654.674271] ata5: device plugged sstatus 0x133
[5174654.687804] ata3: device plugged sstatus 0x131
[5174660.563196] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5174660.571380] ata4.00: configured for UDMA/133
[5174660.576369] ata4: wake up successful, the reset fail can be ignored
[5174660.583712] ata4.00: Enabling discard_zeroes_data
[5174660.597196] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5174660.605367] ata3.00: configured for UDMA/133
[5174660.610350] ata3: wake up successful, the reset fail can be ignored
[5174660.632314] ata3.00: Enabling discard_zeroes_data
[5174660.711201] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5174660.719435] ata5.00: configured for UDMA/133
[5174660.724436] ata5: wake up successful, the reset fail can be ignored
[5174660.731780] ata5.00: Enabling discard_zeroes_data
[5174663.753367] ata2: wake up from deepsleep, reset link now
[5174663.875066] ata2: device plugged sstatus 0x133
[5174672.181881] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5174672.190217] ata2.00: configured for UDMA/133
[5174672.195223] ata2: wake up successful, the reset fail can be ignored
[5178261.153854] eth0: dirty_tx=997 cur_tx=2004, NUM_TX_DESC=1024
[5178261.160390] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5178261.176823] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5178261.193248] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5178261.209675] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5178261.226110] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5178261.242541] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5178261.258969] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5178261.275393] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111122222222222222222111111111111111111111111111]
[5178261.591886]  Reinit 3 0 ALDPS 
[5178261.595503] 0xD6=0x70, check 0xD4=70
[5178261.599704] 0xD6=0x7A, check 0xD4=80
[5178261.603900] 0xD6=0x90, check 0xD4=80
[5178261.608479] ERI 0xDD=0x00, check 0xC2=0
[5178261.613349] ERI 0xDD=0x05, check 0xC2=67
[5178261.623302]  Reinit 1 8001 
[5178261.626621]  Reinit 2 1 
[5178261.629644] r8168_reset_task: reset with tx watchdog timeout
[5178261.639857] ata3: wake up from deepsleep, reset link now
[5178261.640918] ata5: wake up from deepsleep, reset link now
[5178261.643905] ata4: wake up from deepsleep, reset link now
[5178262.055658] ata5: device plugged sstatus 0x133
[5178262.060855] ata4: device plugged sstatus 0x133
[5178262.075854] ata3: device plugged sstatus 0x133
[5178262.961255] init: dhcp-client (eth0) main process (16258) killed by TERM signal
[5178263.658132] init: scsi_plugin_server main process (21865) killed by TERM signal
[5178265.135443]  Reinit 1 8001 
[5178265.138769]  Reinit 2 1 
[5178265.152160] r8168: eth0: link up 1 Gbps
[5178266.882455] init: scsi_plugin_server main process (26403) killed by TERM signal
[5178267.900247] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5178267.908908] ata4.00: configured for UDMA/133
[5178267.913942] ata4: wake up successful, the reset fail can be ignored
[5178267.921315] ata4.00: Enabling discard_zeroes_data
[5178268.156262] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5178268.164613] ata3.00: configured for UDMA/133
[5178268.169680] ata3: wake up successful, the reset fail can be ignored
[5178268.177142] ata3.00: Enabling discard_zeroes_data
[5178268.182617] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5178268.190979] ata5.00: configured for UDMA/133
[5178268.195989] ata5: wake up successful, the reset fail can be ignored
[5178268.203383] ata5.00: Enabling discard_zeroes_data
[5178268.980566] init: nmbd main process (26786) killed by TERM signal
[5178269.566771] init: dhcp-client (eth0) main process (26668) killed by TERM signal
[5178271.230602] ata2: wake up from deepsleep, reset link now
[5178271.353063] ata2: device plugged sstatus 0x133
[5178272.534387] init: scsi_plugin_server main process (26562) killed by TERM signal
[5178272.757425] init: nmbd main process (27784) killed by TERM signal
[5178275.320396] init: iscsi_pluginserverd main process (27763) killed by TERM signal
[5178275.333400] init: iscsi_pluginengined main process (27756) killed by TERM signal
[5178275.383266] init: scsi_plugin_server main process (27779) killed by TERM signal
[5178279.801904] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5178279.810336] ata2.00: configured for UDMA/133
[5178279.815336] ata2: wake up successful, the reset fail can be ignored
[5178315.661597] init: scsi_plugin_server main process (28156) killed by TERM signal
[5178316.223214] init: nmbd main process (29196) killed by TERM signal
[5178317.174944] NET: Unregistered protocol family 15
[5178318.643513] init: iscsi_pluginserverd main process (29020) killed by TERM signal
[5178318.653932] init: iscsi_pluginengined main process (29010) killed by TERM signal
[5178318.688426] init: scsi_plugin_server main process (29031) killed by TERM signal
[5178318.915055] NET: Unregistered protocol family 24
[5178319.007845] PPP generic driver version 2.4.2
[5178319.027283] NET: Registered protocol family 24
[5178319.085364] PPP MPPE Compression module registered
[5178319.098569] PPP BSD Compression module registered
[5178319.113810] PPP Deflate Compression module registered
[5178319.137681] l2tp_core: L2TP core driver, V2.0
[5178319.150325] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5178319.179818] Initializing XFRM netlink socket
[5178319.192650] NET: Registered protocol family 15
[5179887.668849] ata3: wake up from deepsleep, reset link now
[5179887.668910] ata4: wake up from deepsleep, reset link now
[5179887.668954] ata5: wake up from deepsleep, reset link now
[5179888.081825] ata4: device plugged sstatus 0x133
[5179888.087025] ata5: device plugged sstatus 0x133
[5179888.102021] ata3: device plugged sstatus 0x133
[5179893.977264] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5179893.985480] ata4.00: configured for UDMA/133
[5179893.990476] ata4: wake up successful, the reset fail can be ignored
[5179893.997710] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5179893.997801] ata4.00: Enabling discard_zeroes_data
[5179894.011405] ata5.00: configured for UDMA/133
[5179894.016402] ata5: wake up successful, the reset fail can be ignored
[5179894.023745] ata5.00: Enabling discard_zeroes_data
[5179894.212275] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5179894.220475] ata3.00: configured for UDMA/133
[5179894.225478] ata3: wake up successful, the reset fail can be ignored
[5179894.232873] ata3.00: Enabling discard_zeroes_data
[5179897.270459] ata2: wake up from deepsleep, reset link now
[5179897.392039] ata2: device plugged sstatus 0x133
[5179898.264319] init: nmbd main process (467) killed by TERM signal
[5179898.588245] init: scsi_plugin_server main process (29798) killed by TERM signal
[5179899.877799] init: nmbd main process (727) killed by TERM signal
[5179900.745824] init: iscsi_pluginserverd main process (552) killed by TERM signal
[5179900.763187] init: iscsi_pluginengined main process (533) killed by TERM signal
[5179900.781638] NET: Unregistered protocol family 15
[5179900.858305] init: scsi_plugin_server main process (567) killed by TERM signal
[5179903.206762] NET: Unregistered protocol family 24
[5179903.375820] PPP generic driver version 2.4.2
[5179903.412480] NET: Registered protocol family 24
[5179903.536132] PPP MPPE Compression module registered
[5179903.557682] PPP BSD Compression module registered
[5179903.579478] PPP Deflate Compression module registered
[5179903.626483] l2tp_core: L2TP core driver, V2.0
[5179903.649256] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5179903.705674] Initializing XFRM netlink socket
[5179903.728499] NET: Registered protocol family 15
[5179905.733913] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5179905.742261] ata2.00: configured for UDMA/133
[5179905.747250] ata2: wake up successful, the reset fail can be ignored
[5185399.549594] eth0: dirty_tx=717 cur_tx=1724, NUM_TX_DESC=1024
[5185399.556132] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5185399.572587] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5185399.589026] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5185399.605447] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5185399.621865] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5185399.638301] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111122222222222222222111111111111111111111111111111111111111111111111111]
[5185399.654720] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5185399.671140] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5185399.987633]  Reinit 3 0 ALDPS 
[5185399.991256] 0xD6=0x70, check 0xD4=70
[5185399.995468] 0xD6=0x7A, check 0xD4=80
[5185399.999669] 0xD6=0x90, check 0xD4=80
[5185400.004250] ERI 0xDD=0x00, check 0xC2=0
[5185400.009114] ERI 0xDD=0x05, check 0xC2=67
[5185400.019064]  Reinit 1 8001 
[5185400.022383]  Reinit 2 1 
[5185400.025415] r8168_reset_task: reset with tx watchdog timeout
[5185400.035697] ata3: wake up from deepsleep, reset link now
[5185400.035737] ata4: wake up from deepsleep, reset link now
[5185400.035781] ata5: wake up from deepsleep, reset link now
[5185400.449933] ata4: device plugged sstatus 0x133
[5185400.455130] ata5: device plugged sstatus 0x133
[5185400.469529] ata3: device plugged sstatus 0x133
[5185401.436098] init: dhcp-client (eth0) main process (26963) killed by TERM signal
[5185402.238628] init: scsi_plugin_server main process (978) killed by TERM signal
[5185403.043157]  Reinit 1 8001 
[5185403.046485]  Reinit 2 1 
[5185403.059870] r8168: eth0: link up 1 Gbps
[5185404.825628] init: iscsi_pluginserverd main process (4173) killed by TERM signal
[5185404.837448] init: iscsi_pluginengined main process (4171) killed by TERM signal
[5185404.880816] init: scsi_plugin_server main process (4175) killed by TERM signal
[5185406.282991] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5185406.291208] ata4.00: configured for UDMA/133
[5185406.296295] ata4: wake up successful, the reset fail can be ignored
[5185406.303682] ata4.00: Enabling discard_zeroes_data
[5185406.377010] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5185406.385309] ata5.00: configured for UDMA/133
[5185406.390323] ata5: wake up successful, the reset fail can be ignored
[5185406.397863] ata5.00: Enabling discard_zeroes_data
[5185406.478009] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5185406.486279] ata3.00: configured for UDMA/133
[5185406.491308] ata3: wake up successful, the reset fail can be ignored
[5185406.498693] ata3.00: Enabling discard_zeroes_data
[5185407.258139] init: nmbd main process (4553) killed by TERM signal
[5185407.534318] init: dhcp-client (eth0) main process (4417) killed by TERM signal
[5185409.541192] ata2: wake up from deepsleep, reset link now
[5185409.662665] ata2: device plugged sstatus 0x133
[5185410.492842] init: scsi_plugin_server main process (4335) killed by TERM signal
[5185410.814511] init: nmbd main process (5600) killed by TERM signal
[5185413.279408] init: iscsi_pluginserverd main process (5522) killed by TERM signal
[5185413.291064] init: iscsi_pluginengined main process (5516) killed by TERM signal
[5185413.336888] init: scsi_plugin_server main process (5537) killed by TERM signal
[5185418.025641] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5185418.034012] ata2.00: configured for UDMA/133
[5185418.039005] ata2: wake up successful, the reset fail can be ignored
[5185456.967889] init: scsi_plugin_server main process (5962) killed by TERM signal
[5185458.500855] NET: Unregistered protocol family 15
[5185459.927359] init: iscsi_pluginserverd main process (6849) killed by TERM signal
[5185459.937620] init: iscsi_pluginengined main process (6843) killed by TERM signal
[5185459.967475] init: scsi_plugin_server main process (6866) killed by TERM signal
[5185460.228020] NET: Unregistered protocol family 24
[5185460.327582] PPP generic driver version 2.4.2
[5185460.347036] NET: Registered protocol family 24
[5185460.405400] PPP MPPE Compression module registered
[5185460.418291] PPP BSD Compression module registered
[5185460.431017] PPP Deflate Compression module registered
[5185460.454948] l2tp_core: L2TP core driver, V2.0
[5185460.467590] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5185460.496304] Initializing XFRM netlink socket
[5185460.509213] NET: Registered protocol family 15
[5185747.314632] init: scsi_plugin_server main process (7445) killed by TERM signal
[5185747.674534] init: nmbd main process (9732) killed by TERM signal
[5185748.739967] NET: Unregistered protocol family 15
[5185750.115508] init: iscsi_pluginserverd main process (9707) killed by TERM signal
[5185750.125851] init: iscsi_pluginengined main process (9680) killed by TERM signal
[5185750.155570] init: scsi_plugin_server main process (9726) killed by TERM signal
[5185750.469078] NET: Unregistered protocol family 24
[5185750.566753] PPP generic driver version 2.4.2
[5185750.586323] NET: Registered protocol family 24
[5185750.645024] PPP MPPE Compression module registered
[5185750.657950] PPP BSD Compression module registered
[5185750.670746] PPP Deflate Compression module registered
[5185750.694255] l2tp_core: L2TP core driver, V2.0
[5185750.706915] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5185750.736532] Initializing XFRM netlink socket
[5185750.749541] NET: Registered protocol family 15
[5187390.330329] ata3: wake up from deepsleep, reset link now
[5187390.330381] ata5: wake up from deepsleep, reset link now
[5187390.337197] ata4: wake up from deepsleep, reset link now
[5187390.745087] ata5: device plugged sstatus 0x133
[5187390.751440] ata4: device plugged sstatus 0x133
[5187390.765395] ata3: device plugged sstatus 0x133
[5187396.647179] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5187396.655425] ata4.00: configured for UDMA/133
[5187396.660450] ata4: wake up successful, the reset fail can be ignored
[5187396.667725] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5187396.675913] ata3.00: configured for UDMA/133
[5187396.679999] ata4.00: Enabling discard_zeroes_data
[5187396.686371] ata3: wake up successful, the reset fail can be ignored
[5187396.693714] ata3.00: Enabling discard_zeroes_data
[5187396.739186] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5187396.747386] ata5.00: configured for UDMA/133
[5187396.752380] ata5: wake up successful, the reset fail can be ignored
[5187396.759713] ata5.00: Enabling discard_zeroes_data
[5187399.789333] ata2: wake up from deepsleep, reset link now
[5187399.910805] ata2: device plugged sstatus 0x133
[5187408.213811] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5187408.222198] ata2.00: configured for UDMA/133
[5187408.227252] ata2: wake up successful, the reset fail can be ignored
[5191218.643601] ata3: wake up from deepsleep, reset link now
[5191218.643645] ata5: wake up from deepsleep, reset link now
[5191218.649788] ata4: wake up from deepsleep, reset link now
[5191219.058488] ata5: device plugged sstatus 0x133
[5191219.063691] ata4: device plugged sstatus 0x133
[5191219.076830] ata3: device plugged sstatus 0x131
[5191224.878824] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5191224.887022] ata4.00: configured for UDMA/133
[5191224.892017] ata4: wake up successful, the reset fail can be ignored
[5191224.917779] ata4.00: Enabling discard_zeroes_data
[5191225.085830] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5191225.094013] ata3.00: configured for UDMA/133
[5191225.099002] ata3: wake up successful, the reset fail can be ignored
[5191225.106314] ata3.00: Enabling discard_zeroes_data
[5191225.127837] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5191225.138075] ata5.00: configured for UDMA/133
[5191225.143111] ata5: wake up successful, the reset fail can be ignored
[5191225.150491] ata5.00: Enabling discard_zeroes_data
[5191228.189990] ata2: wake up from deepsleep, reset link now
[5191228.311385] ata2: device plugged sstatus 0x133
[5191236.666468] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5191236.675001] ata2.00: configured for UDMA/133
[5191236.680023] ata2: wake up successful, the reset fail can be ignored
[5198510.380190] ata3: wake up from deepsleep, reset link now
[5198510.380236] ata5: wake up from deepsleep, reset link now
[5198510.382813] ata4: wake up from deepsleep, reset link now
[5198510.794931] ata5: device plugged sstatus 0x133
[5198510.800128] ata4: device plugged sstatus 0x133
[5198510.813258] ata3: device plugged sstatus 0x131
[5198516.651130] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5198516.659328] ata4.00: configured for UDMA/133
[5198516.664345] ata4: wake up successful, the reset fail can be ignored
[5198516.671721] ata4.00: Enabling discard_zeroes_data
[5198516.702129] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5198516.710344] ata3.00: configured for UDMA/133
[5198516.715349] ata3: wake up successful, the reset fail can be ignored
[5198516.722724] ata3.00: Enabling discard_zeroes_data
[5198516.860138] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5198516.868770] ata5.00: configured for UDMA/133
[5198516.873817] ata5: wake up successful, the reset fail can be ignored
[5198516.899839] ata5.00: Enabling discard_zeroes_data
[5198519.926313] ata2: wake up from deepsleep, reset link now
[5198520.047450] ata2: device plugged sstatus 0x133
[5198528.409785] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5198528.418161] ata2.00: configured for UDMA/133
[5198528.423152] ata2: wake up successful, the reset fail can be ignored
[5204537.208050] ata5: wake up from deepsleep, reset link now
[5204537.208095] ata3: wake up from deepsleep, reset link now
[5204537.208911] ata4: wake up from deepsleep, reset link now
[5204537.621721] ata4: device plugged sstatus 0x133
[5204537.626922] ata3: device plugged sstatus 0x133
[5204537.641216] ata5: device plugged sstatus 0x133
[5204543.485255] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5204543.493452] ata4.00: configured for UDMA/133
[5204543.498447] ata4: wake up successful, the reset fail can be ignored
[5204543.505792] ata4.00: Enabling discard_zeroes_data
[5204543.566257] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5204543.574466] ata3.00: configured for UDMA/133
[5204543.579459] ata3: wake up successful, the reset fail can be ignored
[5204543.586878] ata3.00: Enabling discard_zeroes_data
[5204543.691263] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5204543.699879] ata5.00: configured for UDMA/133
[5204543.704886] ata5: wake up successful, the reset fail can be ignored
[5204543.712251] ata5.00: Enabling discard_zeroes_data
[5204546.736420] ata2: wake up from deepsleep, reset link now
[5204546.857712] ata2: device plugged sstatus 0x133
[5204555.319911] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5204555.328287] ata2.00: configured for UDMA/133
[5204555.333283] ata2: wake up successful, the reset fail can be ignored
[5209047.873122] ata3: wake up from deepsleep, reset link now
[5209047.873163] ata4: wake up from deepsleep, reset link now
[5209047.875995] ata5: wake up from deepsleep, reset link now
[5209048.286022] ata4: device plugged sstatus 0x133
[5209048.291222] ata5: device plugged sstatus 0x133
[5209048.306254] ata3: device plugged sstatus 0x131
[5209054.113317] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5209054.121531] ata4.00: configured for UDMA/133
[5209054.126524] ata4: wake up successful, the reset fail can be ignored
[5209054.133881] ata4.00: Enabling discard_zeroes_data
[5209054.277328] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5209054.285533] ata3.00: configured for UDMA/133
[5209054.290524] ata3: wake up successful, the reset fail can be ignored
[5209054.297884] ata3.00: Enabling discard_zeroes_data
[5209054.383338] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5209054.391561] ata5.00: configured for UDMA/133
[5209054.396558] ata5: wake up successful, the reset fail can be ignored
[5209054.404193] ata5.00: Enabling discard_zeroes_data
[5209057.428495] ata2: wake up from deepsleep, reset link now
[5209057.549804] ata2: device plugged sstatus 0x133
[5209065.853963] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5209065.862350] ata2.00: configured for UDMA/133
[5209065.867364] ata2: wake up successful, the reset fail can be ignored
[5211462.005325] ata3: wake up from deepsleep, reset link now
[5211462.005369] ata4: wake up from deepsleep, reset link now
[5211462.005400] ata5: wake up from deepsleep, reset link now
[5211462.418213] ata4: device plugged sstatus 0x133
[5211462.423401] ata5: device plugged sstatus 0x133
[5211462.438446] ata3: device plugged sstatus 0x131
[5211468.343489] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5211468.351698] ata3.00: configured for UDMA/133
[5211468.356708] ata3: wake up successful, the reset fail can be ignored
[5211468.363940] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5211468.364043] ata3.00: Enabling discard_zeroes_data
[5211468.377646] ata4.00: configured for UDMA/133
[5211468.382639] ata4: wake up successful, the reset fail can be ignored
[5211468.389977] ata4.00: Enabling discard_zeroes_data
[5211468.463499] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5211468.471703] ata5.00: configured for UDMA/133
[5211468.476715] ata5: wake up successful, the reset fail can be ignored
[5211468.484051] ata5.00: Enabling discard_zeroes_data
[5211471.746657] ata2: wake up from deepsleep, reset link now
[5211471.868054] ata2: device plugged sstatus 0x133
[5211480.177128] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5211480.185484] ata2.00: configured for UDMA/133
[5211480.190479] ata2: wake up successful, the reset fail can be ignored
[5218924.413036] ata3: wake up from deepsleep, reset link now
[5218924.413084] ata4: wake up from deepsleep, reset link now
[5218924.421927] ata5: wake up from deepsleep, reset link now
[5218924.827325] ata4: device plugged sstatus 0x133
[5218924.836537] ata5: device plugged sstatus 0x131
[5218924.846191] ata3: device plugged sstatus 0x131
[5218930.689207] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5218930.697402] ata5.00: configured for UDMA/133
[5218930.702414] ata5: wake up successful, the reset fail can be ignored
[5218930.709759] ata5.00: Enabling discard_zeroes_data
[5218930.824213] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5218930.832464] ata4.00: configured for UDMA/133
[5218930.837451] ata4: wake up successful, the reset fail can be ignored
[5218930.844785] ata4.00: Enabling discard_zeroes_data
[5218930.893214] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5218930.901444] ata3.00: configured for UDMA/133
[5218930.906460] ata3: wake up successful, the reset fail can be ignored
[5218930.913800] ata3.00: Enabling discard_zeroes_data
[5218933.967371] ata2: wake up from deepsleep, reset link now
[5218934.088662] ata2: device plugged sstatus 0x133
[5218942.596856] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5218942.605210] ata2.00: configured for UDMA/133
[5218942.610205] ata2: wake up successful, the reset fail can be ignored
[5223519.899778] ata5: wake up from deepsleep, reset link now
[5223519.899823] ata3: wake up from deepsleep, reset link now
[5223519.899853] ata4: wake up from deepsleep, reset link now
[5223520.314110] ata4: device plugged sstatus 0x133
[5223520.319309] ata3: device plugged sstatus 0x133
[5223520.332814] ata5: device plugged sstatus 0x133
[5223526.152395] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5223526.160613] ata3.00: configured for UDMA/133
[5223526.165605] ata3: wake up successful, the reset fail can be ignored
[5223526.173043] ata3.00: Enabling discard_zeroes_data
[5223526.207059] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5223526.215294] ata4.00: configured for UDMA/133
[5223526.220295] ata4: wake up successful, the reset fail can be ignored
[5223526.227662] ata4.00: Enabling discard_zeroes_data
[5223526.432399] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5223526.440587] ata5.00: configured for UDMA/133
[5223526.445586] ata5: wake up successful, the reset fail can be ignored
[5223526.452906] ata5.00: Enabling discard_zeroes_data
[5223529.486555] ata2: wake up from deepsleep, reset link now
[5223529.607909] ata2: device plugged sstatus 0x133
[5223537.917033] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5223537.925408] ata2.00: configured for UDMA/133
[5223537.930412] ata2: wake up successful, the reset fail can be ignored
[5227047.177198] ata3: wake up from deepsleep, reset link now
[5227047.177284] ata4: wake up from deepsleep, reset link now
[5227047.183401] ata5: wake up from deepsleep, reset link now
[5227047.590294] ata4: device plugged sstatus 0x133
[5227047.597919] ata5: device plugged sstatus 0x131
[5227047.610385] ata3: device unplugged sstatus 0x100
[5227053.497104] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5227053.504291] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5227053.512184] ata4.00: configured for UDMA/133
[5227053.517196] ata4: wake up successful, the reset fail can be ignored
[5227053.524533] ata3.00: configured for UDMA/133
[5227053.529524] ata3: wake up successful, the reset fail can be ignored
[5227053.536800] ata4.00: Enabling discard_zeroes_data
[5227053.542316] ata3.00: Enabling discard_zeroes_data
[5227053.772112] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5227053.780295] ata5.00: configured for UDMA/133
[5227053.785299] ata5: wake up successful, the reset fail can be ignored
[5227053.809769] ata5.00: Enabling discard_zeroes_data
[5227056.844275] ata2: wake up from deepsleep, reset link now
[5227056.965883] ata2: device plugged sstatus 0x133
[5227065.271755] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5227065.280127] ata2.00: configured for UDMA/133
[5227065.285141] ata2: wake up successful, the reset fail can be ignored
[5234389.392162] ata3: wake up from deepsleep, reset link now
[5234389.392212] ata5: wake up from deepsleep, reset link now
[5234389.392242] ata4: wake up from deepsleep, reset link now
[5234389.805058] ata4: device plugged sstatus 0x133
[5234389.810254] ata5: device plugged sstatus 0x133
[5234389.825345] ata3: device plugged sstatus 0x131
[5234395.711168] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5234395.719375] ata5.00: configured for UDMA/133
[5234395.724392] ata5: wake up successful, the reset fail can be ignored
[5234395.731765] ata5.00: Enabling discard_zeroes_data
[5234395.767173] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5234395.775365] ata4.00: configured for UDMA/133
[5234395.780354] ata4: wake up successful, the reset fail can be ignored
[5234395.787643] ata4.00: Enabling discard_zeroes_data
[5234395.840179] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5234395.848392] ata3.00: configured for UDMA/133
[5234395.853378] ata3: wake up successful, the reset fail can be ignored
[5234395.860703] ata3.00: Enabling discard_zeroes_data
[5234399.011347] ata2: wake up from deepsleep, reset link now
[5234399.132599] ata2: device plugged sstatus 0x133
[5234407.641826] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5234407.650138] ata2.00: configured for UDMA/133
[5234407.655130] ata2: wake up successful, the reset fail can be ignored
[5241461.241258] ata3: wake up from deepsleep, reset link now
[5241461.241343] ata4: wake up from deepsleep, reset link now
[5241461.241388] ata5: wake up from deepsleep, reset link now
[5241461.654229] ata4: device plugged sstatus 0x133
[5241461.659427] ata5: device plugged sstatus 0x133
[5241461.674473] ata3: device plugged sstatus 0x133
[5241467.509509] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5241467.517720] ata4.00: configured for UDMA/133
[5241467.522722] ata4: wake up successful, the reset fail can be ignored
[5241467.530607] ata4.00: Enabling discard_zeroes_data
[5241467.696514] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5241467.703671] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5241467.711555] ata3.00: configured for UDMA/133
[5241467.716547] ata3: wake up successful, the reset fail can be ignored
[5241467.723869] ata3.00: Enabling discard_zeroes_data
[5241467.729406] ata5.00: configured for UDMA/133
[5241467.734402] ata5: wake up successful, the reset fail can be ignored
[5241467.741699] ata5.00: Enabling discard_zeroes_data
[5241470.771680] ata2: wake up from deepsleep, reset link now
[5241470.892918] ata2: device plugged sstatus 0x133
[5241479.252170] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5241479.260568] ata2.00: configured for UDMA/133
[5241479.265587] ata2: wake up successful, the reset fail can be ignored
[5248740.676011] ata3: wake up from deepsleep, reset link now
[5248740.676089] ata4: wake up from deepsleep, reset link now
[5248740.682346] ata5: wake up from deepsleep, reset link now
[5248741.088985] ata4: device plugged sstatus 0x133
[5248741.097037] ata5: device plugged sstatus 0x131
[5248741.109146] ata3: device plugged sstatus 0x131
[5248746.928475] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5248746.936714] ata4.00: configured for UDMA/133
[5248746.941735] ata4: wake up successful, the reset fail can be ignored
[5248746.949088] ata4.00: Enabling discard_zeroes_data
[5248747.150498] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5248747.158737] ata3.00: configured for UDMA/133
[5248747.163743] ata3: wake up successful, the reset fail can be ignored
[5248747.171072] ata3.00: Enabling discard_zeroes_data
[5248747.204515] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5248747.213182] ata5.00: configured for UDMA/133
[5248747.218194] ata5: wake up successful, the reset fail can be ignored
[5248747.247949] ata5.00: Enabling discard_zeroes_data
[5248750.272657] ata2: wake up from deepsleep, reset link now
[5248750.393928] ata2: device plugged sstatus 0x133
[5248758.858149] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5248758.866497] ata2.00: configured for UDMA/133
[5248758.871530] ata2: wake up successful, the reset fail can be ignored
[5255970.621055] ata3: wake up from deepsleep, reset link now
[5255970.621103] ata5: wake up from deepsleep, reset link now
[5255970.621132] ata4: wake up from deepsleep, reset link now
[5255971.034009] ata4: device plugged sstatus 0x133
[5255971.039206] ata5: device plugged sstatus 0x133
[5255971.054202] ata3: device plugged sstatus 0x133
[5255976.875735] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5255976.882888] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5255976.890749] ata5.00: configured for UDMA/133
[5255976.895764] ata5: wake up successful, the reset fail can be ignored
[5255976.903254] ata5.00: Enabling discard_zeroes_data
[5255976.908784] ata4.00: configured for UDMA/133
[5255976.913771] ata4: wake up successful, the reset fail can be ignored
[5255976.921045] ata4.00: Enabling discard_zeroes_data
[5255977.124743] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5255977.132914] ata3.00: configured for UDMA/133
[5255977.137908] ata3: wake up successful, the reset fail can be ignored
[5255977.145320] ata3.00: Enabling discard_zeroes_data
[5255980.216914] ata2: wake up from deepsleep, reset link now
[5255980.338131] ata2: device plugged sstatus 0x133
[5255988.743395] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5255988.751726] ata2.00: configured for UDMA/133
[5255988.756718] ata2: wake up successful, the reset fail can be ignored
[5259079.189426] ata3: wake up from deepsleep, reset link now
[5259079.189467] ata4: wake up from deepsleep, reset link now
[5259079.191837] ata5: wake up from deepsleep, reset link now
[5259079.602324] ata4: device plugged sstatus 0x133
[5259079.607519] ata5: device plugged sstatus 0x133
[5259079.622587] ata3: device plugged sstatus 0x131
[5259085.547152] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5259085.555379] ata4.00: configured for UDMA/133
[5259085.560404] ata4: wake up successful, the reset fail can be ignored
[5259085.585461] ata4.00: Enabling discard_zeroes_data
[5259085.670161] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5259085.678336] ata3.00: configured for UDMA/133
[5259085.683328] ata3: wake up successful, the reset fail can be ignored
[5259085.690726] ata3.00: Enabling discard_zeroes_data
[5259085.717163] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5259085.726457] ata5.00: configured for UDMA/133
[5259085.732185] ata5: wake up successful, the reset fail can be ignored
[5259085.761818] ata5.00: Enabling discard_zeroes_data
[5259088.773325] ata2: wake up from deepsleep, reset link now
[5259088.894589] ata2: device plugged sstatus 0x133
[5259097.254795] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5259097.263126] ata2.00: configured for UDMA/133
[5259097.268125] ata2: wake up successful, the reset fail can be ignored
[5263005.050324] ata3: wake up from deepsleep, reset link now
[5263005.050406] ata4: wake up from deepsleep, reset link now
[5263005.056551] ata5: wake up from deepsleep, reset link now
[5263005.464699] ata4: device plugged sstatus 0x133
[5263005.471102] ata5: device plugged sstatus 0x131
[5263005.483544] ata3: device plugged sstatus 0x131
[5263011.376908] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5263011.385122] ata3.00: configured for UDMA/133
[5263011.390123] ata3: wake up successful, the reset fail can be ignored
[5263011.397435] ata3.00: Enabling discard_zeroes_data
[5263011.417908] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5263011.426098] ata4.00: configured for UDMA/133
[5263011.431178] ata4: wake up successful, the reset fail can be ignored
[5263011.438517] ata4.00: Enabling discard_zeroes_data
[5263011.587918] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5263011.596090] ata5.00: configured for UDMA/133
[5263011.601075] ata5: wake up successful, the reset fail can be ignored
[5263011.608389] ata5.00: Enabling discard_zeroes_data
[5263014.652073] ata2: wake up from deepsleep, reset link now
[5263014.773625] ata2: device plugged sstatus 0x133
[5263023.133563] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5263023.142397] ata2.00: configured for UDMA/133
[5263023.147490] ata2: wake up successful, the reset fail can be ignored
[5270419.336207] ata3: wake up from deepsleep, reset link now
[5270419.336251] ata5: wake up from deepsleep, reset link now
[5270419.336298] ata4: wake up from deepsleep, reset link now
[5270419.749089] ata4: device plugged sstatus 0x133
[5270419.754280] ata5: device plugged sstatus 0x133
[5270419.769324] ata3: device plugged sstatus 0x131
[5270425.558529] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5270425.566758] ata4.00: configured for UDMA/133
[5270425.571909] ata4: wake up successful, the reset fail can be ignored
[5270425.579269] ata4.00: Enabling discard_zeroes_data
[5270425.753558] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5270425.761774] ata5.00: configured for UDMA/133
[5270425.766769] ata5: wake up successful, the reset fail can be ignored
[5270425.774101] ata5.00: Enabling discard_zeroes_data
[5270425.779617] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5270425.787827] ata3.00: configured for UDMA/133
[5270425.792813] ata3: wake up successful, the reset fail can be ignored
[5270425.800175] ata3.00: Enabling discard_zeroes_data
[5270428.889714] ata2: wake up from deepsleep, reset link now
[5270429.010992] ata2: device plugged sstatus 0x133
[5270437.372202] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5270437.380690] ata2.00: configured for UDMA/133
[5270437.385776] ata2: wake up successful, the reset fail can be ignored
[5277651.881343] ata3: wake up from deepsleep, reset link now
[5277651.881392] ata5: wake up from deepsleep, reset link now
[5277651.881423] ata4: wake up from deepsleep, reset link now
[5277652.294123] ata4: device plugged sstatus 0x133
[5277652.299317] ata5: device plugged sstatus 0x133
[5277652.314527] ata3: device plugged sstatus 0x131
[5277658.135411] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5277658.143630] ata4.00: configured for UDMA/133
[5277658.148623] ata4: wake up successful, the reset fail can be ignored
[5277658.172213] ata4.00: Enabling discard_zeroes_data
[5277658.185407] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5277658.193607] ata5.00: configured for UDMA/133
[5277658.198593] ata5: wake up successful, the reset fail can be ignored
[5277658.205902] ata5.00: Enabling discard_zeroes_data
[5277658.270429] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5277658.278609] ata3.00: configured for UDMA/133
[5277658.283594] ata3: wake up successful, the reset fail can be ignored
[5277658.290944] ata3.00: Enabling discard_zeroes_data
[5277661.345576] ata2: wake up from deepsleep, reset link now
[5277661.466908] ata2: device plugged sstatus 0x133
[5277669.823073] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5277669.831867] ata2.00: configured for UDMA/133
[5277669.836985] ata2: wake up successful, the reset fail can be ignored
[5284786.413884] ata3: wake up from deepsleep, reset link now
[5284786.413955] ata5: wake up from deepsleep, reset link now
[5284786.413991] ata4: wake up from deepsleep, reset link now
[5284786.826848] ata4: device plugged sstatus 0x133
[5284786.832037] ata5: device plugged sstatus 0x133
[5284786.847037] ata3: device plugged sstatus 0x131
[5284792.667260] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5284792.675482] ata4.00: configured for UDMA/133
[5284792.680477] ata4: wake up successful, the reset fail can be ignored
[5284792.687826] ata4.00: Enabling discard_zeroes_data
[5284792.862293] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5284792.870542] ata3.00: configured for UDMA/133
[5284792.875612] ata3: wake up successful, the reset fail can be ignored
[5284792.882979] ata3.00: Enabling discard_zeroes_data
[5284792.900271] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5284792.908463] ata5.00: configured for UDMA/133
[5284792.913468] ata5: wake up successful, the reset fail can be ignored
[5284792.920846] ata5.00: Enabling discard_zeroes_data
[5284795.942437] ata2: wake up from deepsleep, reset link now
[5284796.063784] ata2: device plugged sstatus 0x133
[5284804.371921] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5284804.380626] ata2.00: configured for UDMA/133
[5284804.385833] ata2: wake up successful, the reset fail can be ignored
[5292974.198007] ata3: wake up from deepsleep, reset link now
[5292974.198060] ata5: wake up from deepsleep, reset link now
[5292974.198086] ata4: wake up from deepsleep, reset link now
[5292974.610892] ata4: device plugged sstatus 0x133
[5292974.616088] ata5: device plugged sstatus 0x133
[5292974.631115] ata3: device plugged sstatus 0x133
[5292980.470787] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5292980.478973] ata4.00: configured for UDMA/133
[5292980.483962] ata4: wake up successful, the reset fail can be ignored
[5292980.491300] ata4.00: Enabling discard_zeroes_data
[5292980.554801] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5292980.562976] ata5.00: configured for UDMA/133
[5292980.567968] ata5: wake up successful, the reset fail can be ignored
[5292980.575269] ata5.00: Enabling discard_zeroes_data
[5292980.628811] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5292980.637024] ata3.00: configured for UDMA/133
[5292980.642017] ata3: wake up successful, the reset fail can be ignored
[5292980.649341] ata3.00: Enabling discard_zeroes_data
[5292983.722965] ata2: wake up from deepsleep, reset link now
[5292983.844157] ata2: device plugged sstatus 0x133
[5292992.252486] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5292992.260848] ata2.00: configured for UDMA/133
[5292992.265860] ata2: wake up successful, the reset fail can be ignored
[5295133.854300] ata3: wake up from deepsleep, reset link now
[5295133.854343] ata4: wake up from deepsleep, reset link now
[5295133.856620] ata5: wake up from deepsleep, reset link now
[5295134.267225] ata4: device plugged sstatus 0x133
[5295134.272423] ata5: device plugged sstatus 0x133
[5295134.287458] ata3: device plugged sstatus 0x131
[5295140.114922] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5295140.123155] ata5.00: configured for UDMA/133
[5295140.128181] ata5: wake up successful, the reset fail can be ignored
[5295140.135409] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5295140.135533] ata5.00: Enabling discard_zeroes_data
[5295140.149064] ata4.00: configured for UDMA/133
[5295140.154072] ata4: wake up successful, the reset fail can be ignored
[5295140.161434] ata4.00: Enabling discard_zeroes_data
[5295140.187933] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5295140.196147] ata3.00: configured for UDMA/133
[5295140.201142] ata3: wake up successful, the reset fail can be ignored
[5295140.225933] ata3.00: Enabling discard_zeroes_data
[5295143.258089] ata2: wake up from deepsleep, reset link now
[5295143.379605] ata2: device plugged sstatus 0x133
[5295151.637557] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5295151.645884] ata2.00: configured for UDMA/133
[5295151.650880] ata2: wake up successful, the reset fail can be ignored
[5297868.772952] ata3: wake up from deepsleep, reset link now
[5297868.772992] ata4: wake up from deepsleep, reset link now
[5297868.773025] ata5: wake up from deepsleep, reset link now
[5297869.187152] ata4: device plugged sstatus 0x133
[5297869.192353] ata5: device plugged sstatus 0x133
[5297869.206077] ata3: device plugged sstatus 0x131
[5297875.026142] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5297875.034376] ata4.00: configured for UDMA/133
[5297875.039397] ata4: wake up successful, the reset fail can be ignored
[5297875.046750] ata4.00: Enabling discard_zeroes_data
[5297875.095162] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5297875.103910] ata3.00: configured for UDMA/133
[5297875.108911] ata3: wake up successful, the reset fail can be ignored
[5297875.116565] ata3.00: Enabling discard_zeroes_data
[5297875.349168] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5297875.357351] ata5.00: configured for UDMA/133
[5297875.362347] ata5: wake up successful, the reset fail can be ignored
[5297875.369680] ata5.00: Enabling discard_zeroes_data
[5297878.402324] ata2: wake up from deepsleep, reset link now
[5297878.523740] ata2: device plugged sstatus 0x133
[5297886.832787] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5297886.841154] ata2.00: configured for UDMA/133
[5297886.846184] ata2: wake up successful, the reset fail can be ignored
[5305493.193683] ata3: wake up from deepsleep, reset link now
[5305493.193725] ata4: wake up from deepsleep, reset link now
[5305493.196536] ata5: wake up from deepsleep, reset link now
[5305493.606647] ata4: device plugged sstatus 0x133
[5305493.611848] ata5: device plugged sstatus 0x133
[5305493.628897] ata3: device plugged sstatus 0x133
[5305499.450849] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5305499.459076] ata4.00: configured for UDMA/133
[5305499.464115] ata4: wake up successful, the reset fail can be ignored
[5305499.484646] ata4.00: Enabling discard_zeroes_data
[5305499.516863] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5305499.525044] ata5.00: configured for UDMA/133
[5305499.530046] ata5: wake up successful, the reset fail can be ignored
[5305499.558730] ata5.00: Enabling discard_zeroes_data
[5305499.643863] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5305499.652047] ata3.00: configured for UDMA/133
[5305499.657126] ata3: wake up successful, the reset fail can be ignored
[5305499.664537] ata3.00: Enabling discard_zeroes_data
[5305502.688015] ata2: wake up from deepsleep, reset link now
[5305502.809270] ata2: device plugged sstatus 0x133
[5305511.266498] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5305511.274865] ata2.00: configured for UDMA/133
[5305511.279859] ata2: wake up successful, the reset fail can be ignored
[5305512.011540] init: logrotate main process (15994) terminated with status 1
[5311466.811726] ata4: wake up from deepsleep, reset link now
[5311466.811779] ata3: wake up from deepsleep, reset link now
[5311466.820542] ata5: wake up from deepsleep, reset link now
[5311467.226530] ata3: device plugged sstatus 0x133
[5311467.235297] ata5: device plugged sstatus 0x133
[5311467.242950] ata4: device plugged sstatus 0x133
[5311473.060881] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5311473.069125] ata4.00: configured for UDMA/133
[5311473.074142] ata4: wake up successful, the reset fail can be ignored
[5311473.081476] ata4.00: Enabling discard_zeroes_data
[5311473.175887] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5311473.183914] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5311473.191207] ata5.00: configured for UDMA/133
[5311473.196209] ata5: wake up successful, the reset fail can be ignored
[5311473.203636] ata5.00: Enabling discard_zeroes_data
[5311473.210227] ata3.00: configured for UDMA/133
[5311473.215226] ata3: wake up successful, the reset fail can be ignored
[5311473.238895] ata3.00: Enabling discard_zeroes_data
[5311476.313046] ata2: wake up from deepsleep, reset link now
[5311476.434413] ata2: device plugged sstatus 0x133
[5311484.757513] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5311484.765856] ata2.00: configured for UDMA/133
[5311484.770849] ata2: wake up successful, the reset fail can be ignored
[5313645.396463] ata3: wake up from deepsleep, reset link now
[5313645.396515] ata5: wake up from deepsleep, reset link now
[5313645.403782] ata4: wake up from deepsleep, reset link now
[5313645.811011] ata5: device plugged sstatus 0x133
[5313645.816676] ata4: device plugged sstatus 0x131
[5313645.829649] ata3: device plugged sstatus 0x131
[5313651.720657] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5313651.728874] ata3.00: configured for UDMA/133
[5313651.733861] ata3: wake up successful, the reset fail can be ignored
[5313651.741238] ata3.00: Enabling discard_zeroes_data
[5313651.753669] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5313651.761889] ata4.00: configured for UDMA/133
[5313651.766903] ata4: wake up successful, the reset fail can be ignored
[5313651.774232] ata4.00: Enabling discard_zeroes_data
[5313652.017681] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5313652.026294] ata5.00: configured for UDMA/133
[5313652.031291] ata5: wake up successful, the reset fail can be ignored
[5313652.038614] ata5.00: Enabling discard_zeroes_data
[5313655.084844] ata2: wake up from deepsleep, reset link now
[5313655.206436] ata2: device plugged sstatus 0x133
[5313663.514305] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5313663.522636] ata2.00: configured for UDMA/133
[5313663.527627] ata2: wake up successful, the reset fail can be ignored
[5318864.929530] ata3: wake up from deepsleep, reset link now
[5318864.929600] ata5: wake up from deepsleep, reset link now
[5318864.935774] ata4: wake up from deepsleep, reset link now
[5318865.344293] ata5: device plugged sstatus 0x133
[5318865.349489] ata4: device plugged sstatus 0x133
[5318865.362777] ata3: device plugged sstatus 0x131
[5318871.323648] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5318871.331873] ata3.00: configured for UDMA/133
[5318871.336865] ata3: wake up successful, the reset fail can be ignored
[5318871.344236] ata3.00: Enabling discard_zeroes_data
[5318871.357641] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5318871.365845] ata4.00: configured for UDMA/133
[5318871.370832] ata4: wake up successful, the reset fail can be ignored
[5318871.378151] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5318871.378170] ata4.00: Enabling discard_zeroes_data
[5318871.391847] ata5.00: configured for UDMA/133
[5318871.396835] ata5: wake up successful, the reset fail can be ignored
[5318871.404221] ata5.00: Enabling discard_zeroes_data
[5318874.490808] ata2: wake up from deepsleep, reset link now
[5318874.612228] ata2: device plugged sstatus 0x133
[5318882.916292] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5318882.924653] ata2.00: configured for UDMA/133
[5318882.929730] ata2: wake up successful, the reset fail can be ignored
[5322263.936658] ata3: wake up from deepsleep, reset link now
[5322263.936744] ata5: wake up from deepsleep, reset link now
[5322263.942853] ata4: wake up from deepsleep, reset link now
[5322264.351384] ata5: device plugged sstatus 0x133
[5322264.356578] ata4: device plugged sstatus 0x133
[5322264.369893] ata3: device plugged sstatus 0x131
[5322270.208883] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5322270.217089] ata4.00: configured for UDMA/133
[5322270.222089] ata4: wake up successful, the reset fail can be ignored
[5322270.229488] ata4.00: Enabling discard_zeroes_data
[5322270.272884] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5322270.281128] ata3.00: configured for UDMA/133
[5322270.286104] ata3: wake up successful, the reset fail can be ignored
[5322270.293412] ata3.00: Enabling discard_zeroes_data
[5322270.402891] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5322270.411513] ata5.00: configured for UDMA/133
[5322270.416505] ata5: wake up successful, the reset fail can be ignored
[5322270.423948] ata5.00: Enabling discard_zeroes_data
[5322273.470049] ata2: wake up from deepsleep, reset link now
[5322273.591420] ata2: device plugged sstatus 0x133
[5322281.951518] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5322281.959868] ata2.00: configured for UDMA/133
[5322281.964857] ata2: wake up successful, the reset fail can be ignored
[5326700.254460] ata3: wake up from deepsleep, reset link now
[5326700.254571] ata4: wake up from deepsleep, reset link now
[5326700.256798] ata5: wake up from deepsleep, reset link now
[5326700.667428] ata4: device plugged sstatus 0x133
[5326700.672629] ata5: device plugged sstatus 0x133
[5326700.687665] ata3: device plugged sstatus 0x133
[5326706.525135] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5326706.533346] ata4.00: configured for UDMA/133
[5326706.538337] ata4: wake up successful, the reset fail can be ignored
[5326706.545823] ata4.00: Enabling discard_zeroes_data
[5326706.576138] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5326706.584349] ata5.00: configured for UDMA/133
[5326706.589337] ata5: wake up successful, the reset fail can be ignored
[5326706.596655] ata5.00: Enabling discard_zeroes_data
[5326706.734149] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5326706.742340] ata3.00: configured for UDMA/133
[5326706.747326] ata3: wake up successful, the reset fail can be ignored
[5326706.754682] ata3.00: Enabling discard_zeroes_data
[5326709.314274] ata2: wake up from deepsleep, reset link now
[5326709.435590] ata2: device plugged sstatus 0x133
[5326717.790747] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5326717.799089] ata2.00: configured for UDMA/133
[5326717.804083] ata2: wake up successful, the reset fail can be ignored
[5330587.568605] ata3: wake up from deepsleep, reset link now
[5330587.568641] ata4: wake up from deepsleep, reset link now
[5330587.576787] ata5: wake up from deepsleep, reset link now
[5330587.981544] ata4: device plugged sstatus 0x133
[5330587.991524] ata5: device plugged sstatus 0x133
[5330588.001758] ata3: device plugged sstatus 0x133
[5330593.973762] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5330593.981967] ata4.00: configured for UDMA/133
[5330593.986960] ata4: wake up successful, the reset fail can be ignored
[5330593.994697] ata4.00: Enabling discard_zeroes_data
[5330594.036765] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5330594.044971] ata5.00: configured for UDMA/133
[5330594.050012] ata5: wake up successful, the reset fail can be ignored
[5330594.057351] ata5.00: Enabling discard_zeroes_data
[5330594.062832] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5330594.071016] ata3.00: configured for UDMA/133
[5330594.076007] ata3: wake up successful, the reset fail can be ignored
[5330594.083323] ata3.00: Enabling discard_zeroes_data
[5330597.189938] ata2: wake up from deepsleep, reset link now
[5330597.311214] ata2: device plugged sstatus 0x133
[5330605.768429] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5330605.776795] ata2.00: configured for UDMA/133
[5330605.781788] ata2: wake up successful, the reset fail can be ignored
[5331139.599816] eth0: dirty_tx=10030025 cur_tx=10031032, NUM_TX_DESC=1024
[5331139.607214] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5331139.623641] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5331139.640068] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5331139.656489] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5331139.672907] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5331139.689335] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5331139.705748] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5331139.722168] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111222222222222222221111111111111111111111111111111111111111111111111111111]
[5331140.038637]  Reinit 3 0 ALDPS 
[5331140.042253] 0xD6=0x70, check 0xD4=0
[5331140.046353] 0xD6=0x7A, check 0xD4=80
[5331140.050546] 0xD6=0x90, check 0xD4=80
[5331140.055123] ERI 0xDD=0x00, check 0xC2=0
[5331140.059988] ERI 0xDD=0x05, check 0xC2=67
[5331140.069937]  Reinit 1 8001 
[5331140.073255]  Reinit 2 1 
[5331140.076274] r8168_reset_task: reset with tx watchdog timeout
[5331141.942238] init: dhcp-client (eth0) main process (4704) killed by TERM signal
[5331142.610544] init: scsi_plugin_server main process (10351) killed by TERM signal
[5331143.087390]  Reinit 1 8001 
[5331143.090701]  Reinit 2 1 
[5331143.104050] r8168: eth0: link up 1 Gbps
[5331144.495418] init: dhcp-client (eth0) main process (32643) killed by TERM signal
[5331144.669596] init: iscsi_pluginserverd main process (32717) killed by TERM signal
[5331144.680064] init: iscsi_pluginengined main process (32708) killed by TERM signal
[5331144.712477] init: scsi_plugin_server main process (32721) killed by TERM signal
[5331146.324297] init: iscsi_pluginserverd main process (778) killed by TERM signal
[5331146.350596] init: iscsi_pluginengined main process (777) killed by TERM signal
[5331146.422235] init: scsi_plugin_server main process (783) killed by TERM signal
[5331146.645056] init: iscsi_pluginserverd main process (1536) killed by TERM signal
[5331146.656738] init: iscsi_pluginengined main process (1532) killed by TERM signal
[5331146.699980] init: scsi_plugin_server main process (1548) killed by TERM signal
[5331190.273543] init: scsi_plugin_server main process (1645) killed by TERM signal
[5331191.942791] NET: Unregistered protocol family 15
[5331193.162799] init: iscsi_pluginserverd main process (3592) killed by TERM signal
[5331193.173026] init: iscsi_pluginengined main process (3587) killed by TERM signal
[5331193.200020] init: scsi_plugin_server main process (3622) killed by TERM signal
[5331193.668955] NET: Unregistered protocol family 24
[5331193.860243] PPP generic driver version 2.4.2
[5331193.898311] NET: Registered protocol family 24
[5331193.978625] PPP MPPE Compression module registered
[5331193.991480] PPP BSD Compression module registered
[5331194.021057] PPP Deflate Compression module registered
[5331194.044502] l2tp_core: L2TP core driver, V2.0
[5331194.057207] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5331194.090888] Initializing XFRM netlink socket
[5331194.115257] NET: Registered protocol family 15
[5334050.378501] ata3: wake up from deepsleep, reset link now
[5334050.384830] ata4: wake up from deepsleep, reset link now
[5334050.384872] ata5: wake up from deepsleep, reset link now
[5334050.799399] ata3: device plugged sstatus 0x133
[5334050.804596] ata5: device plugged sstatus 0x133
[5334050.809974] ata4: device plugged sstatus 0x131
[5334056.759588] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5334056.767793] ata5.00: configured for UDMA/133
[5334056.772811] ata5: wake up successful, the reset fail can be ignored
[5334056.780155] ata5.00: Enabling discard_zeroes_data
[5334056.802587] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5334056.810787] ata4.00: configured for UDMA/133
[5334056.815770] ata4: wake up successful, the reset fail can be ignored
[5334056.823083] ata4.00: Enabling discard_zeroes_data
[5334056.843598] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5334056.851813] ata3.00: configured for UDMA/133
[5334056.856821] ata3: wake up successful, the reset fail can be ignored
[5334056.864120] ata3.00: Enabling discard_zeroes_data
[5334060.317791] ata2: wake up from deepsleep, reset link now
[5334060.440213] ata2: device plugged sstatus 0x133
[5334061.807593] init: scsi_plugin_server main process (4225) killed by TERM signal
[5334062.017161] init: scsi_plugin_server main process (8433) killed by TERM signal
[5334062.527253] init: nmbd main process (8394) killed by TERM signal
[5334063.798411] NET: Unregistered protocol family 15
[5334066.311117] NET: Unregistered protocol family 24
[5334066.476532] PPP generic driver version 2.4.2
[5334066.513219] NET: Registered protocol family 24
[5334066.636474] PPP MPPE Compression module registered
[5334066.657957] PPP BSD Compression module registered
[5334066.679584] PPP Deflate Compression module registered
[5334066.725857] l2tp_core: L2TP core driver, V2.0
[5334066.747691] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5334066.803995] Initializing XFRM netlink socket
[5334066.828337] NET: Registered protocol family 15
[5334068.784255] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5334068.792662] ata2.00: configured for UDMA/133
[5334068.797788] ata2: wake up successful, the reset fail can be ignored
[5339904.081498] eth0: dirty_tx=1175 cur_tx=2182, NUM_TX_DESC=1024
[5339904.088141] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5339904.104581] eth0: TX queue state[11111122222222222222222111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5339904.121010] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5339904.137444] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5339904.153872] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5339904.170301] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5339904.186731] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5339904.203166] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5339904.519647]  Reinit 3 0 ALDPS 
[5339904.523269] 0xD6=0x70, check 0xD4=70
[5339904.527474] 0xD6=0x7A, check 0xD4=80
[5339904.531674] 0xD6=0x90, check 0xD4=80
[5339904.536257] ERI 0xDD=0x00, check 0xC2=0
[5339904.541130] ERI 0xDD=0x05, check 0xC2=67
[5339904.551085]  Reinit 1 8001 
[5339904.554413]  Reinit 2 1 
[5339904.557438] r8168_reset_task: reset with tx watchdog timeout
[5339904.566424] ata3: wake up from deepsleep, reset link now
[5339904.566478] ata4: wake up from deepsleep, reset link now
[5339904.570903] ata5: wake up from deepsleep, reset link now
[5339904.979309] ata4: device plugged sstatus 0x133
[5339904.985552] ata5: device plugged sstatus 0x133
[5339904.999541] ata3: device plugged sstatus 0x131
[5339905.865703] init: dhcp-client (eth0) main process (727) killed by TERM signal
[5339906.637983] init: scsi_plugin_server main process (8461) killed by TERM signal
[5339908.091093]  Reinit 1 8001 
[5339908.094425]  Reinit 2 1 
[5339908.107819] r8168: eth0: link up 1 Gbps
[5339909.844256] init: scsi_plugin_server main process (12386) killed by TERM signal
[5339910.830906] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5339910.839792] ata4.00: configured for UDMA/133
[5339910.844806] ata4: wake up successful, the reset fail can be ignored
[5339910.874440] ata4.00: Enabling discard_zeroes_data
[5339911.024924] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5339911.033164] ata5.00: configured for UDMA/133
[5339911.038174] ata5: wake up successful, the reset fail can be ignored
[5339911.045593] ata5.00: Enabling discard_zeroes_data
[5339911.136910] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5339911.145157] ata3.00: configured for UDMA/133
[5339911.150158] ata3: wake up successful, the reset fail can be ignored
[5339911.157537] ata3.00: Enabling discard_zeroes_data
[5339911.884736] init: nmbd main process (12814) killed by TERM signal
[5339912.544496] init: dhcp-client (eth0) main process (12700) killed by TERM signal
[5339914.183105] ata2: wake up from deepsleep, reset link now
[5339914.305057] ata2: device plugged sstatus 0x133
[5339915.353956] init: scsi_plugin_server main process (12555) killed by TERM signal
[5339915.829530] init: nmbd main process (13879) killed by TERM signal
[5339918.298731] init: iscsi_pluginserverd main process (13819) killed by TERM signal
[5339918.310901] init: iscsi_pluginengined main process (13817) killed by TERM signal
[5339918.354219] init: scsi_plugin_server main process (13831) killed by TERM signal
[5339922.632543] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5339922.640948] ata2.00: configured for UDMA/133
[5339922.645948] ata2: wake up successful, the reset fail can be ignored
[5339961.972980] init: scsi_plugin_server main process (14235) killed by TERM signal
[5339963.384732] NET: Unregistered protocol family 15
[5339964.892863] init: iscsi_pluginserverd main process (15169) killed by TERM signal
[5339964.903114] init: iscsi_pluginengined main process (15161) killed by TERM signal
[5339964.935973] init: scsi_plugin_server main process (15193) killed by TERM signal
[5339965.106840] NET: Unregistered protocol family 24
[5339965.199112] PPP generic driver version 2.4.2
[5339965.218774] NET: Registered protocol family 24
[5339965.276330] PPP MPPE Compression module registered
[5339965.289126] PPP BSD Compression module registered
[5339965.301770] PPP Deflate Compression module registered
[5339965.325344] l2tp_core: L2TP core driver, V2.0
[5339965.338079] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5339965.366576] Initializing XFRM netlink socket
[5339965.379402] NET: Registered protocol family 15
[5343138.688101] ata3: wake up from deepsleep, reset link now
[5343138.688180] ata5: wake up from deepsleep, reset link now
[5343138.694282] ata4: wake up from deepsleep, reset link now
[5343139.102741] ata5: device plugged sstatus 0x133
[5343139.107936] ata4: device plugged sstatus 0x133
[5343139.121258] ata3: device plugged sstatus 0x133
[5343144.999923] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5343145.008159] ata4.00: configured for UDMA/133
[5343145.013158] ata4: wake up successful, the reset fail can be ignored
[5343145.020501] ata4.00: Enabling discard_zeroes_data
[5343145.064927] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5343145.073128] ata3.00: configured for UDMA/133
[5343145.078121] ata3: wake up successful, the reset fail can be ignored
[5343145.107974] ata3.00: Enabling discard_zeroes_data
[5343145.118925] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5343145.127163] ata5.00: configured for UDMA/133
[5343145.132173] ata5: wake up successful, the reset fail can be ignored
[5343145.139514] ata5.00: Enabling discard_zeroes_data
[5343148.167098] ata2: wake up from deepsleep, reset link now
[5343148.288964] ata2: device plugged sstatus 0x133
[5343149.197782] init: nmbd main process (19415) killed by TERM signal
[5343149.368536] init: scsi_plugin_server main process (15740) killed by TERM signal
[5343150.480174] init: nmbd main process (19614) killed by TERM signal
[5343151.633298] NET: Unregistered protocol family 15
[5343151.770690] init: iscsi_pluginserverd main process (19455) killed by TERM signal
[5343151.786628] init: iscsi_pluginengined main process (19444) killed by TERM signal
[5343151.852613] init: scsi_plugin_server main process (19477) killed by TERM signal
[5343153.969443] NET: Unregistered protocol family 24
[5343154.127639] PPP generic driver version 2.4.2
[5343154.164308] NET: Registered protocol family 24
[5343154.288409] PPP MPPE Compression module registered
[5343154.312165] PPP BSD Compression module registered
[5343154.333863] PPP Deflate Compression module registered
[5343154.381664] l2tp_core: L2TP core driver, V2.0
[5343154.403794] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5343154.462207] Initializing XFRM netlink socket
[5343154.484945] NET: Registered protocol family 15
[5343156.622552] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5343156.630901] ata2.00: configured for UDMA/133
[5343156.635900] ata2: wake up successful, the reset fail can be ignored
[5347468.943377] ata4: wake up from deepsleep, reset link now
[5347468.943420] ata3: wake up from deepsleep, reset link now
[5347468.943458] ata5: wake up from deepsleep, reset link now
[5347469.358160] ata3: device plugged sstatus 0x133
[5347469.363361] ata5: device plugged sstatus 0x133
[5347469.376010] ata4: device plugged sstatus 0x131
[5347475.219227] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5347475.227451] ata4.00: configured for UDMA/133
[5347475.232461] ata4: wake up successful, the reset fail can be ignored
[5347475.239807] ata4.00: Enabling discard_zeroes_data
[5347475.396249] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5347475.404426] ata3.00: configured for UDMA/133
[5347475.409403] ata3: wake up successful, the reset fail can be ignored
[5347475.416708] ata3.00: Enabling discard_zeroes_data
[5347475.454244] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5347475.462463] ata5.00: configured for UDMA/133
[5347475.467453] ata5: wake up successful, the reset fail can be ignored
[5347475.474806] ata5.00: Enabling discard_zeroes_data
[5347478.621409] ata2: wake up from deepsleep, reset link now
[5347478.742658] ata2: device plugged sstatus 0x133
[5347487.102893] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5347487.111233] ata2.00: configured for UDMA/133
[5347487.116220] ata2: wake up successful, the reset fail can be ignored
[5349868.633462] eth0: dirty_tx=1251 cur_tx=2258, NUM_TX_DESC=1024
[5349868.640092] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5349868.656521] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111112222222222222222211111111111111111111111111111]
[5349868.672941] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5349868.689369] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5349868.705795] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5349868.722218] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5349868.738649] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5349868.755071] eth0: TX queue state[11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111]
[5349869.071555]  Reinit 3 0 ALDPS 
[5349869.075163] 0xD6=0x70, check 0xD4=70
[5349869.079365] 0xD6=0x7A, check 0xD4=80
[5349869.083562] 0xD6=0x90, check 0xD4=80
[5349869.088141] ERI 0xDD=0x00, check 0xC2=0
[5349869.093008] ERI 0xDD=0x05, check 0xC2=67
[5349869.102960]  Reinit 1 8001 
[5349869.106278]  Reinit 2 1 
[5349869.109301] r8168_reset_task: reset with tx watchdog timeout
[5349869.119545] ata3: wake up from deepsleep, reset link now
[5349869.119573] ata4: wake up from deepsleep, reset link now
[5349869.121930] ata5: wake up from deepsleep, reset link now
[5349869.533754] ata4: device plugged sstatus 0x133
[5349869.538956] ata5: device plugged sstatus 0x133
[5349869.552740] ata3: device plugged sstatus 0x133
[5349870.432771] init: dhcp-client (eth0) main process (13028) killed by TERM signal
[5349871.143031] init: scsi_plugin_server main process (19879) killed by TERM signal
[5349872.565053]  Reinit 1 8001 
[5349872.568380]  Reinit 2 1 
[5349872.581762] r8168: eth0: link up 1 Gbps
[5349874.338231] init: scsi_plugin_server main process (24765) killed by TERM signal
[5349875.487878] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5349875.496107] ata4.00: configured for UDMA/133
[5349875.501129] ata4: wake up successful, the reset fail can be ignored
[5349875.508487] ata4.00: Enabling discard_zeroes_data
[5349875.565879] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5349875.574653] ata5.00: configured for UDMA/133
[5349875.579658] ata5: wake up successful, the reset fail can be ignored
[5349875.587556] ata5.00: Enabling discard_zeroes_data
[5349875.661900] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5349875.670886] ata3.00: configured for UDMA/133
[5349875.675964] ata3: wake up successful, the reset fail can be ignored
[5349875.684314] ata3.00: Enabling discard_zeroes_data
[5349876.511094] init: nmbd main process (25180) killed by TERM signal
[5349876.984384] init: dhcp-client (eth0) main process (25043) killed by TERM signal
[5349878.984074] ata2: wake up from deepsleep, reset link now
[5349879.109039] ata2: device plugged sstatus 0x133
[5349879.795271] init: scsi_plugin_server main process (24924) killed by TERM signal
[5349880.248382] init: nmbd main process (26186) killed by TERM signal
[5349882.814210] init: iscsi_pluginserverd main process (26120) killed by TERM signal
[5349882.827679] init: iscsi_pluginengined main process (26107) killed by TERM signal
[5349882.872307] init: scsi_plugin_server main process (26130) killed by TERM signal
[5349887.437532] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5349887.445943] ata2.00: configured for UDMA/133
[5349887.450947] ata2: wake up successful, the reset fail can be ignored
[5349926.696411] init: scsi_plugin_server main process (26561) killed by TERM signal
[5349927.006480] init: nmbd main process (27486) killed by TERM signal
[5349927.446635] init: nmbd main process (27646) killed by TERM signal
[5349928.323779] NET: Unregistered protocol family 15
[5349929.679098] init: iscsi_pluginserverd main process (27375) killed by TERM signal
[5349929.689409] init: iscsi_pluginengined main process (27364) killed by TERM signal
[5349929.723643] init: scsi_plugin_server main process (27385) killed by TERM signal
[5349930.031874] NET: Unregistered protocol family 24
[5349930.120904] PPP generic driver version 2.4.2
[5349930.140606] NET: Registered protocol family 24
[5349930.199069] PPP MPPE Compression module registered
[5349930.211905] PPP BSD Compression module registered
[5349930.224827] PPP Deflate Compression module registered
[5349930.248178] l2tp_core: L2TP core driver, V2.0
[5349930.260995] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5349930.289286] Initializing XFRM netlink socket
[5349930.302862] NET: Registered protocol family 15
[5351180.938522] init: scsi_plugin_server main process (28114) killed by TERM signal
[5351181.435656] init: nmbd main process (31196) killed by TERM signal
[5351182.390551] NET: Unregistered protocol family 15
[5351183.794929] init: iscsi_pluginserverd main process (31132) killed by TERM signal
[5351183.805293] init: iscsi_pluginengined main process (31112) killed by TERM signal
[5351183.834653] init: scsi_plugin_server main process (31145) killed by TERM signal
[5351184.135647] NET: Unregistered protocol family 24
[5351184.227801] PPP generic driver version 2.4.2
[5351184.247260] NET: Registered protocol family 24
[5351184.306799] PPP MPPE Compression module registered
[5351184.319799] PPP BSD Compression module registered
[5351184.332531] PPP Deflate Compression module registered
[5351184.356237] l2tp_core: L2TP core driver, V2.0
[5351184.369005] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[5351184.398055] Initializing XFRM netlink socket
[5351184.411334] NET: Registered protocol family 15
[5359718.092735] ata3: wake up from deepsleep, reset link now
[5359718.092773] ata4: wake up from deepsleep, reset link now
[5359718.099170] ata5: wake up from deepsleep, reset link now
[5359718.505413] ata4: device plugged sstatus 0x133
[5359718.513867] ata5: device plugged sstatus 0x133
[5359718.525867] ata3: device plugged sstatus 0x133
[5359724.415793] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5359724.424012] ata4.00: configured for UDMA/133
[5359724.429014] ata4: wake up successful, the reset fail can be ignored
[5359724.436275] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5359724.436357] ata4.00: Enabling discard_zeroes_data
[5359724.449970] ata5.00: configured for UDMA/133
[5359724.454978] ata5: wake up successful, the reset fail can be ignored
[5359724.462308] ata5.00: Enabling discard_zeroes_data
[5359724.489797] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5359724.498007] ata3.00: configured for UDMA/133
[5359724.503053] ata3: wake up successful, the reset fail can be ignored
[5359724.527722] ata3.00: Enabling discard_zeroes_data
[5359727.564950] ata2: wake up from deepsleep, reset link now
[5359727.686158] ata2: device plugged sstatus 0x133
[5359736.042422] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5359736.050833] ata2.00: configured for UDMA/133
[5359736.055852] ata2: wake up successful, the reset fail can be ignored
[5364322.053978] ata3: wake up from deepsleep, reset link now
[5364322.054023] ata4: wake up from deepsleep, reset link now
[5364322.056908] ata5: wake up from deepsleep, reset link now
[5364322.466811] ata4: device plugged sstatus 0x133
[5364322.472039] ata5: device plugged sstatus 0x133
[5364322.487704] ata3: device plugged sstatus 0x133
[5364328.325226] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5364328.332385] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5364328.340265] ata5.00: configured for UDMA/133
[5364328.345257] ata5: wake up successful, the reset fail can be ignored
[5364328.352598] ata5.00: Enabling discard_zeroes_data
[5364328.352603] ata4.00: configured for UDMA/133
[5364328.363033] ata4: wake up successful, the reset fail can be ignored
[5364328.370350] ata4.00: Enabling discard_zeroes_data
[5364328.490229] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5364328.498420] ata3.00: configured for UDMA/133
[5364328.503424] ata3: wake up successful, the reset fail can be ignored
[5364328.510792] ata3.00: Enabling discard_zeroes_data
[5364331.573386] ata2: wake up from deepsleep, reset link now
[5364331.694629] ata2: device plugged sstatus 0x133
[5364340.051878] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5364340.060309] ata2.00: configured for UDMA/133
[5364340.065312] ata2: wake up successful, the reset fail can be ignored
[5371653.545568] ata3: wake up from deepsleep, reset link now
[5371653.545660] ata5: wake up from deepsleep, reset link now
[5371653.545680] ata4: wake up from deepsleep, reset link now
[5371653.958486] ata4: device plugged sstatus 0x133
[5371653.963688] ata5: device plugged sstatus 0x133
[5371653.981556] ata3: device plugged sstatus 0x133
[5371659.875767] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5371659.884003] ata3.00: configured for UDMA/133
[5371659.889154] ata3: wake up successful, the reset fail can be ignored
[5371659.896551] ata3.00: Enabling discard_zeroes_data
[5371659.972772] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5371659.980993] ata4.00: configured for UDMA/133
[5371659.985975] ata4: wake up successful, the reset fail can be ignored
[5371659.993320] ata4.00: Enabling discard_zeroes_data
[5371660.010769] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5371660.018983] ata5.00: configured for UDMA/133
[5371660.023972] ata5: wake up successful, the reset fail can be ignored
[5371660.031401] ata5.00: Enabling discard_zeroes_data
[5371663.141928] ata2: wake up from deepsleep, reset link now
[5371663.263221] ata2: device plugged sstatus 0x133
[5371671.624398] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[5371671.632733] ata2.00: configured for UDMA/133
[5371671.637727] ata2: wake up successful, the reset fail can be ignored
[5372092.969077] BTRFS critical (device dm-0): leaf bad key order, block=2717818945536, root=2, slot=41
[5372093.005462] BTRFS critical (device dm-0): leaf bad key order, block=2717818945536, root=2, slot=41
[5372093.020627] BTRFS critical (device dm-0): leaf bad key order, block=2717818945536, root=2, slot=41
[5372093.030836] ------------[ cut here ]------------
[5372093.036215] WARNING: CPU: 0 PID: 10682 at fs/btrfs/disk-io.c:1095 btree_io_failed_hook+0x1bc/0x220 [btrfs]()
[5372093.047405] Modules linked in: ipt_MASQUERADE xt_REDIRECT nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 nf_nat_redirect nf_nat xt_recent xt_iprange xt_limit xt_state xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter xfrm6_mode_transport xfrm4_mode_transport xfrm6_mode_tunnel xfrm4_mode_tunnel xfrm6_mode_beet xfrm4_mode_beet deflate authencesn authenc ipcomp6 ipcomp xfrm6_tunnel xfrm4_tunnel tunnel6 esp6 esp4 ah6 ah4 xfrm_ipcomp af_key xfrm_user xfrm_algo hmac l2tp_ppp l2tp_core ppp_deflate bsd_comp ppp_mppe arc4 echainiv xt_TCPMSS xt_tcpudp iptable_mangle pppox ppp_async ppp_generic slhc nf_conntrack ip_tables x_tables cifs udf isofs loop tcm_loop(O) syno_hddmon(P) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O)
[5372093.128289]  syno_extent_pool(PO) rodsp_ep(O) hid_generic usbhid hid usblp usb_storage uhci_hcd ehci_pci ehci_hcd apollolake_synobios(PO) leds_lp3943 exfat(O) btrfs i915 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cfbfillrect cfbcopyarea cfbimgblt drm drm_panel_orientation_quirks iosf_mbi fb fbdev video backlight button synoacl_vfs(PO) hfsplus md4 r8168(O) igb(O) i2c_algo_bit e1000e(O) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper cryptd ecryptfs sha256_generic ecb aes_x86_64 des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd xhci_pci xhci_hcd
[5372093.206240]  usbcore usb_common [last unloaded: slhc]
[5372093.210431] CPU: 0 PID: 10682 Comm: kworker/u8:15 Tainted: P        W  O    4.4.59+ #25426
[5372093.219857] Hardware name: Synology DS1019+/DS1019+, BIOS M.412 04/01/2020
[5372093.227751] Workqueue: btrfs-endio-meta btrfs_endio_meta_helper [btrfs]
[5372093.235335]  0000000000000000 ffff880001a3fc68 ffffffff812bb8cd 0000000000000000
[5372093.243802]  ffffffffa069b533 ffff880001a3fca0 ffffffff8104a1fd ffff88024ec29908
[5372093.252269]  00000278caa20000 ffff880076e80bd8 0000000000000000 ffff8801bd597000
[5372093.260743] Call Trace:
[5372093.263668]  [<ffffffff812bb8cd>] dump_stack+0x4d/0x70
[5372093.269599]  [<ffffffff8104a1fd>] warn_slowpath_common+0x7d/0xc0
[5372093.276502]  [<ffffffff8104a2f6>] warn_slowpath_null+0x16/0x20
[5372093.283225]  [<ffffffffa060061c>] btree_io_failed_hook+0x1bc/0x220 [btrfs]
[5372093.291114]  [<ffffffffa0631166>] end_bio_extent_readpage+0x196/0xa80 [btrfs]
[5372093.299279]  [<ffffffff81071fe9>] ? sched_clock_cpu+0xb9/0xd0
[5372093.305891]  [<ffffffff812958ca>] bio_endio+0x3a/0x70
[5372093.311737]  [<ffffffffa05feed7>] end_workqueue_fn+0x37/0x40 [btrfs]
[5372093.319041]  [<ffffffffa0641f3d>] normal_work_helper+0x19d/0x1b0 [btrfs]
[5372093.326732]  [<ffffffffa06420fd>] btrfs_endio_meta_helper+0xd/0x10 [btrfs]
[5372093.334607]  [<ffffffff8105fe92>] process_one_work+0x142/0x360
[5372093.341313]  [<ffffffff8106055a>] worker_thread+0x4a/0x450
[5372093.347634]  [<ffffffff81060510>] ? max_active_store+0x60/0x60
[5372093.354341]  [<ffffffff810652d6>] kthread+0xc6/0xe0
[5372093.359970]  [<ffffffff81065210>] ? kthread_create_on_node+0x180/0x180
[5372093.367455]  [<ffffffff815777bf>] ret_from_fork+0x3f/0x80
[5372093.373678]  [<ffffffff81065210>] ? kthread_create_on_node+0x180/0x180
[5372093.381476] ---[ end trace 49b3b995ae8a8db9 ]---
[5372093.404583] BTRFS critical (device dm-0): leaf bad key order, block=2717818945536, root=2, slot=41
[5372093.427102] BTRFS critical (device dm-0): leaf bad key order, block=2717818945536, root=2, slot=41
[5372093.437816] BTRFS critical (device dm-0): leaf bad key order, block=2717818945536, root=2, slot=41
[5372093.448263] ------------[ cut here ]------------
[5372093.453679] WARNING: CPU: 2 PID: 10202 at fs/btrfs/extent-tree.c:4004 btrfs_start_dirty_block_groups+0x260/0x3d0 [btrfs]()
[5372093.466294] BTRFS: Transaction aborted (error -5)
[5372093.466296] Modules linked in: ipt_MASQUERADE xt_REDIRECT nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 nf_nat_redirect nf_nat xt_recent xt_iprange xt_limit xt_state xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter xfrm6_mode_transport xfrm4_mode_transport xfrm6_mode_tunnel xfrm4_mode_tunnel xfrm6_mode_beet xfrm4_mode_beet deflate authencesn authenc ipcomp6 ipcomp xfrm6_tunnel xfrm4_tunnel tunnel6 esp6 esp4 ah6 ah4 xfrm_ipcomp af_key xfrm_user xfrm_algo hmac l2tp_ppp l2tp_core ppp_deflate bsd_comp ppp_mppe arc4 echainiv xt_TCPMSS xt_tcpudp iptable_mangle pppox ppp_async ppp_generic slhc nf_conntrack ip_tables x_tables cifs udf isofs loop tcm_loop(O) syno_hddmon(P) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O)
[5372093.547299]  syno_extent_pool(PO) rodsp_ep(O) hid_generic usbhid hid usblp usb_storage uhci_hcd ehci_pci ehci_hcd apollolake_synobios(PO) leds_lp3943 exfat(O) btrfs i915 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cfbfillrect cfbcopyarea cfbimgblt drm drm_panel_orientation_quirks iosf_mbi fb fbdev video backlight button synoacl_vfs(PO) hfsplus md4 r8168(O) igb(O) i2c_algo_bit e1000e(O) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper cryptd ecryptfs sha256_generic ecb aes_x86_64 des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd xhci_pci xhci_hcd
[5372093.625264]  usbcore usb_common [last unloaded: slhc]
[5372093.629471] CPU: 2 PID: 10202 Comm: smbd Tainted: P        W  O    4.4.59+ #25426
[5372093.638023] Hardware name: Synology DS1019+/DS1019+, BIOS M.412 04/01/2020
[5372093.645894]  0000000000000000 ffff88023d4f7d38 ffffffff812bb8cd ffff88023d4f7d80
[5372093.654362]  ffffffffa069b13a ffff88023d4f7d70 ffffffff8104a1fd ffff8801a5c4ea98
[5372093.662829]  ffff8800632d3c00 0000000000000001 ffff8800632d3d50 ffff8800679b1000
[5372093.671296] Call Trace:
[5372093.674220]  [<ffffffff812bb8cd>] dump_stack+0x4d/0x70
[5372093.680153]  [<ffffffff8104a1fd>] warn_slowpath_common+0x7d/0xc0
[5372093.687056]  [<ffffffff8104a289>] warn_slowpath_fmt+0x49/0x50
[5372093.693683]  [<ffffffffa05f7670>] btrfs_start_dirty_block_groups+0x260/0x3d0 [btrfs]
[5372093.702541]  [<ffffffffa060a998>] btrfs_commit_transaction+0x178/0xcb0 [btrfs]
[5372093.710815]  [<ffffffffa060b565>] ? start_transaction+0x95/0x3d0 [btrfs]
[5372093.718502]  [<ffffffffa05d511e>] btrfs_sync_fs+0x4e/0xc0 [btrfs]
[5372093.725502]  [<ffffffff8116a9ac>] sync_filesystem+0x6c/0xa0
[5372093.731918]  [<ffffffff8116ab0c>] SyS_syncfs+0x3c/0x70
[5372093.737850]  [<ffffffff8157740a>] entry_SYSCALL_64_fastpath+0x1e/0x92
[5372093.745262] ---[ end trace 49b3b995ae8a8dba ]---
[5372093.750621] BTRFS: error (device dm-0) in btrfs_start_dirty_block_groups:4004: errno=-5 IO failure
[5372093.760837] BTRFS info (device dm-0): forced readonly
[5372093.766864] BTRFS warning (device dm-0): Skipping commit of aborted transaction.
[5372093.775340] BTRFS: error (device dm-0) in cleanup_transaction:2032: errno=-5 IO failure
[5375701.176237] nr_pdflush_threads exported in /proc is scheduled for removal
[5378236.526270] sfdisk (20907): drop_caches: 3
[5378237.034207] BTRFS error (device dm-0): parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378237.059444] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378237.077023] sfdisk (20917): drop_caches: 3
[5378237.103932] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378237.170028] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378237.178889] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717771022336, mirror = 2

[5378237.322930] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378237.332113] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378237.341178] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378237.350189] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378237.359229] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378237.467522] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378237.497437] sfdisk (20920): drop_caches: 3
[5378237.520157] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378238.074648] sfdisk (20921): drop_caches: 3
[5378238.748010] BTRFS error (device dm-0): parent transid verify failed on 2717772152832 wanted 142264 found 142232
[5378238.997712] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717772152832, mirror = 2

[5378239.185029] sfdisk (20935): drop_caches: 3
[5378239.248270] BTRFS error (device dm-0): parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378239.445771] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717771022336, mirror = 2

[5378239.839028] md: bind<sde1>
[5378239.876189] RAID1 conf printout:
[5378239.876195]  --- wd:3 rd:5
[5378239.876198]  disk 0, wo:0, o:1, dev:sda1
[5378239.876200]  disk 1, wo:0, o:1, dev:sdb1
[5378239.876202]  disk 2, wo:0, o:1, dev:sdc1
[5378239.876204]  disk 3, wo:1, o:1, dev:sde1
[5378239.876324] md: md0: current auto_remap = 0
[5378239.881258] md: recovery of RAID array md0
[5378239.886081] md: minimum _guaranteed_  speed: 10000 KB/sec/disk.
[5378239.892945] md: using maximum available idle IO bandwidth (but not more than 10000 KB/sec) for recovery.
[5378239.904440] md: using 128k window, over a total of 2490176k.
[5378239.975772] md: bind<sde2>
[5378240.068624] RAID1 conf printout:
[5378240.068631]  --- wd:3 rd:5
[5378240.068635]  disk 0, wo:0, o:1, dev:sda2
[5378240.068637]  disk 1, wo:0, o:1, dev:sdb2
[5378240.068639]  disk 2, wo:0, o:1, dev:sdc2
[5378240.068641]  disk 3, wo:1, o:1, dev:sde2
[5378240.068781] md: md1: current auto_remap = 0
[5378240.073947] md: recovery of RAID array md1
[5378240.078726] md: minimum _guaranteed_  speed: 10000 KB/sec/disk.
[5378240.085538] md: using maximum available idle IO bandwidth (but not more than 10000 KB/sec) for recovery.
[5378240.096338] md: using 128k window, over a total of 2097088k.
[5378240.778882] sfdisk (20950): drop_caches: 3
[5378241.218906] BTRFS error (device dm-0): parent transid verify failed on 2717772152832 wanted 142264 found 142232
[5378241.309898] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717772152832, mirror = 2

[5378241.643334] sfdisk (20953): drop_caches: 3
[5378241.703702] BTRFS error (device dm-0): parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378241.762744] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717771022336, mirror = 2

[5378241.905810] BTRFS error (device dm-0): parent transid verify failed on 2717772152832 wanted 142264 found 142232
[5378241.958309] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717772152832, mirror = 2

[5378242.061131] btree_readpage_end_io_hook: 2456 callbacks suppressed
[5378242.068152] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378242.086699] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378242.103669] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378242.120662] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378242.154659] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378242.185649] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378242.194703] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378242.203690] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378242.213033] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378242.230699] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378243.312515] sfdisk (20967): drop_caches: 3
[5378243.461236] BTRFS error (device dm-0): parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5378243.474677] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717771857920, mirror = 2

[5378243.582074] BTRFS error (device dm-0): parent transid verify failed on 2717772152832 wanted 142264 found 142232
[5378243.674070] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717772152832, mirror = 2

[5378244.442037] md: bind<sde5>
[5378244.771301] md/raid1:md3: active with 1 out of 1 mirrors
[5378244.808334] md3: detected capacity change from 0 to 1995451858944
[5378247.230006] btree_readpage_end_io_hook: 6460 callbacks suppressed
[5378247.237067] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378247.250802] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378247.436810] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378247.482959] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378247.511955] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378247.611259] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378247.638093] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378247.733950] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378247.749969] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378247.766948] parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5378269.510595] EXT4-fs (dm-1): barriers disabled
[5378269.671110] EXT4-fs (dm-1): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback
[5378270.109537] EXT4-fs (dm-1): re-mounted. Opts: (null)
[5378270.142818] EXT4-fs (dm-1): re-mounted. Opts: (null)
[5378270.849051] EXT4-fs (dm-1): re-mounted. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,
[5378277.385289] md: md3: set sde5 to auto_remap [1]
[5378448.705856] md: md1: recovery done.
[5378448.766798] md: md1: current auto_remap = 0
[5378448.812441] RAID1 conf printout:
[5378448.812445]  --- wd:4 rd:5
[5378448.812448]  disk 0, wo:0, o:1, dev:sda2
[5378448.812450]  disk 1, wo:0, o:1, dev:sdb2
[5378448.812452]  disk 2, wo:0, o:1, dev:sdc2
[5378448.812454]  disk 3, wo:0, o:1, dev:sde2
[5378492.424480] md: md0: recovery done.
[5378492.450415] md: md0: current auto_remap = 0
[5378492.520868] RAID1 conf printout:
[5378492.520872]  --- wd:4 rd:5
[5378492.520875]  disk 0, wo:0, o:1, dev:sda1
[5378492.520877]  disk 1, wo:0, o:1, dev:sdb1
[5378492.520879]  disk 2, wo:0, o:1, dev:sdc1
[5378492.520881]  disk 3, wo:0, o:1, dev:sde1
[5380145.519119] BTRFS info (device dm-0): using free space tree
[5380145.525564] BTRFS error (device dm-0): Remounting read-write after error is not allowed
[5380234.561547] EXT4-fs (md0): re-mounted. Opts: (null)
[5380287.141369] BTRFS info (device dm-0): using free space tree
[5380287.147802] BTRFS error (device dm-0): Remounting read-write after error is not allowed
[5380373.964743] BTRFS info (device dm-0): using free space tree
[5380373.971185] BTRFS error (device dm-0): Remounting read-write after error is not allowed
[5381379.528015] BTRFS error (device dm-0): parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381379.548814] btree_readpage_end_io_hook: 1978 callbacks suppressed
[5381379.555844] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381379.583969] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381379.594497] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381379.603434] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717771857920, mirror = 2

[5381379.619293] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381379.628311] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381379.637542] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381379.651466] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381379.676923] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381379.685974] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381379.695152] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381379.799506] BTRFS error (device dm-0): parent transid verify failed on 2717771022336 wanted 142264 found 142015
[5381379.856058] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717771022336, mirror = 2

[5381380.123289] BTRFS error (device dm-0): parent transid verify failed on 2717772152832 wanted 142264 found 142232
[5381380.171103] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717772152832, mirror = 2

[5381381.715890] BTRFS error (device dm-0): parent transid verify failed on 2717772398592 wanted 142264 found 142084
[5381381.759085] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717772398592, mirror = 2

[5381384.036524] BTRFS error (device dm-0): parent transid verify failed on 2717770891264 wanted 142264 found 142015
[5381384.081763] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717770891264, mirror = 2

[5381384.926005] btree_readpage_end_io_hook: 6051 callbacks suppressed
[5381384.933035] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381384.942090] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381384.951145] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381384.960156] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381384.969268] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381384.978283] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381384.987730] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381384.996723] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381385.005843] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381385.014840] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381398.895750] btree_readpage_end_io_hook: 8118 callbacks suppressed
[5381398.902880] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381398.911918] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381398.921017] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381398.941130] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381398.954061] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381398.963112] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381398.972213] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381398.981242] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381398.990461] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381398.999568] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381404.346694] btree_readpage_end_io_hook: 17454 callbacks suppressed
[5381404.353821] parent transid verify failed on 2717770891264 wanted 142264 found 142015
[5381404.362904] parent transid verify failed on 2717770891264 wanted 142264 found 142015
[5381404.371968] parent transid verify failed on 2717770891264 wanted 142264 found 142015
[5381404.380973] parent transid verify failed on 2717770891264 wanted 142264 found 142015
[5381404.409151] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381404.418165] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381404.427278] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381404.436328] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381404.445472] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381404.454561] parent transid verify failed on 2717771857920 wanted 142264 found 142015
[5381404.604618] BTRFS error (device dm-0): error loading props for ino 11822 (root 439): -5
[5381688.711204] BTRFS error (device dm-0): parent transid verify failed on 2717772087296 wanted 142264 found 142232
[5381688.730626] btree_readpage_end_io_hook: 3272 callbacks suppressed
[5381688.737662] parent transid verify failed on 2717772087296 wanted 142264 found 142232
[5381688.768555] parent transid verify failed on 2717772087296 wanted 142264 found 142232
[5381688.778018] parent transid verify failed on 2717772087296 wanted 142264 found 142232
[5381688.786884] BTRFS error (device dm-0): BTRFS: dm-0 failed to repair parent transid verify failure on 2717772087296, mirror = 2

[5381688.801869] BTRFS info (device dm-0): no csum found for inode 12414 start 12288
[5381688.838770] BTRFS warning (device dm-0): csum failed ino 12414 off 12288 csum 733359009 expected csum 0

Re: Problem with Btrsf

[Qu Wenruo]

[-- Attachment #1.1: Type: text/plain, Size: 2296 bytes --]



On 2020/12/2 上午2:48, Régis Priqueler wrote:
> Hi,
> 
> My system is an synology with a SHR array of 3 2Tb WD Red (WD40EFAX)
> whish seems to be a SMR .
> 
> The filesystem has gone to read only this afternoon (without any
> modification of the NAS).
> 
> Synology says that the disks are not compatible because of SMR.
> 
> As I wanted to be sure I browse the logs and found that there's some errors
> 
> In dmesg
> 
> some BTRFS critical (device dm-0): leaf bad key order,
> block=2717818945536, root=2, slot=41

That's the root cause, extent tree has something corrupted.

Normally if you're using newer enough kernel, such problem should not
reach disk at least.

The vendor kernel is pretty old, 4.4, and I'm not sure how heavily the
backport is.

> 
> then
> 
> 2020-12-01T13:50:28+01:00 MediasHomeBase kernel: [5372093.750621] BTRFS:
> error (device dm-0) in btrfs_start_dirty_block_groups:4004: errno=-5 IO
> failure
> 2020-12-01T13:50:28+01:00 MediasHomeBase kernel: [5372093.766864] BTRFS
> warning (device dm-0): Skipping commit of aborted transaction.
> 2020-12-01T13:50:28+01:00 MediasHomeBase kernel: [5372093.775340] BTRFS:
> error (device dm-0) in cleanup_transaction:2032: errno=-5 IO failure
> 2020-12-01T14:50:35+01:00 MediasHomeBase kernel: [5375701.176237]
> nr_pdflush_threads exported in /proc is scheduled for removal
> 
> I'm not very familliar with BTRFS
> 
> Is there a way to repair this problem ?

Btrfs check output please.

Please try the latest btrfs-progs.

At the meantime, the corruption is only limited to extent tree, thus you
still have a chance to mount the fs RO, and salvage your data.

Thanks,
Qu

> 
> Best regards,
> 
> Infos:
> 
> Linux MediasHomeBase 4.4.59+ #25426 SMP PREEMPT Wed Jul 8 03:21:29 CST
> 2020 x86_64 GNU/Linux synology_apollolake_1019+
> btrfs-progs v4.0
> Label: '2020.09.17-15:40:50 v25426'  uuid:
> aae48b56-d453-4dfb-b5dd-3af62e923686
>     Total devices 1 FS bytes used 2.22TiB
>     devid    1 size 7.27TiB used 2.52TiB path /dev/mapper/vg1000-lv
> 
> Data, single: total=2.46TiB, used=2.22TiB
> System, DUP: total=8.00MiB, used=64.00KiB
> Metadata, DUP: total=28.50GiB, used=2.64GiB
> GlobalReserve, single: total=2.00GiB, used=0.00B
> 


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]