Linux Btrfs filesystem development
 help / color / mirror / Atom feed
* btrfs pseudo-drbd
@ 2013-05-19 17:32 Martin
  2013-05-22 22:31 ` Martin
  0 siblings, 1 reply; 2+ messages in thread
From: Martin @ 2013-05-19 17:32 UTC (permalink / raw)
  To: linux-btrfs

Dear Devs,

Would there be any problem to use nbd (/dev/ndX) devices to gain
btrfs-raid across multiple physical hosts across a network? (For a sort
of btrfs-drbd! :-) )


Regards,
Martin


http://en.wikipedia.org/wiki/Network_block_device

http://www.drbd.org/


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: btrfs pseudo-drbd
  2013-05-19 17:32 btrfs pseudo-drbd Martin
@ 2013-05-22 22:31 ` Martin
  0 siblings, 0 replies; 2+ messages in thread
From: Martin @ 2013-05-22 22:31 UTC (permalink / raw)
  To: linux-btrfs

On 19/05/13 18:32, Martin wrote:
> Dear Devs,
> 
> Would there be any problem to use nbd (/dev/ndX) devices to gain
> btrfs-raid across multiple physical hosts across a network? (For a sort
> of btrfs-drbd! :-) )
> 
> 
> Regards,
> Martin
> 
> 
> http://en.wikipedia.org/wiki/Network_block_device
> 
> http://www.drbd.org/


As a follow-up, both nbd and AoE look to be active.

nbd uses tcp/ip (layer 3) and is network routable;

AoE operates on layer 2 (no IP addressing) and so looks to enjoy a lower
overhead for the performance. Ideal for putting together your own low
cost SAN!


Network Block Device (TCP version)
http://nbd.sourceforge.net/

ATA Over Ethernet: As an Alternative
http://www.rfxn.com/ata-over-ethernet-as-an-alternative/

EtherDrive® storage and Linux 2.6
http://support.coraid.com/support/linux/EtherDrive-2.6-HOWTO.html




Hope of interest,

Regards,
Martin


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2013-05-22 22:31 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-19 17:32 btrfs pseudo-drbd Martin
2013-05-22 22:31 ` Martin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox