libsocketcan: Setting CAN FD data bitrate

libsocketcan: Setting CAN FD data bitrate

[Thomas Wagner]

Hello Marc and Lars,

I have been searching for a possibility to set the CAN FD data bitrate
with libsocketcan recently and came across this [1] old thread.

It seems like there has never been a final patch?  If this is the case I
will look into it myself but I wanted to make sure there is no other
solution already present beforehand.

[1] - https://marc.info/?l=linux-can&m=153418949026459&w=2

Regards
Thomas Wagner

Re: libsocketcan: Setting CAN FD data bitrate

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 964 bytes --]

On 18.06.2021 10:27:40, Thomas Wagner wrote:
> Hello Marc and Lars,
> 
> I have been searching for a possibility to set the CAN FD data bitrate
> with libsocketcan recently and came across this [1] old thread.
> 
> It seems like there has never been a final patch?  If this is the case I
> will look into it myself but I wanted to make sure there is no other
> solution already present beforehand.

As far as I know, there isn't any other solution.

> [1] - https://marc.info/?l=linux-can&m=153418949026459&w=2

Feel free to pick up the discussion.

For the record: The thread starts at:
https://lore.kernel.org/r/68f4de55-c98a-3081-a2fe-084e01df73b8@gmx.de

regards
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]