From: Kendall Willis <k-willis@ti.com>
To: Markus Schneider-Pargmann <msp@baylibre.com>,
Chandrasekar Ramakrishnan <rcsekar@samsung.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Vishal Mahaveer <vishalm@ti.com>,
Kevin Hilman <khilman@baylibre.com>, Dhruva Gole <d-gole@ti.com>,
Sebin Francis <sebin.francis@ti.com>,
Akashdeep Kaur <a-kaur@ti.com>, Simon Horman <horms@kernel.org>,
Vincent MAILHOL <mailhol.vincent@wanadoo.fr>,
<linux-can@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v9 1/4] dt-bindings: can: m_can: Add wakeup properties
Date: Tue, 2 Sep 2025 14:59:42 -0500 [thread overview]
Message-ID: <33a285bc-2fbe-4ff6-ae09-e4c13a098647@ti.com> (raw)
In-Reply-To: <20250820-topic-mcan-wakeup-source-v6-12-v9-1-0ac13f2ddd67@baylibre.com>
On 8/20/25 07:42, Markus Schneider-Pargmann wrote:
> The pins associated with m_can have to have a special configuration to
> be able to wakeup the SoC from some system states. This configuration is
> described in the wakeup pinctrl state while the default state describes
> the default configuration. Also add the sleep state which is already in
> use by some devicetrees.
>
> Also m_can can be a wakeup-source if capable of wakeup.
>
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> ---
> .../devicetree/bindings/net/can/bosch,m_can.yaml | 25 ++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> index c4887522e8fe97c3947357b4dbd4ecf20ee8100a..0e00be18a8be681634f25378bb2cdef034dc4e6b 100644
> --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> @@ -106,6 +106,26 @@ properties:
> maximum: 32
> minItems: 1
>
> + pinctrl-0:
> + description: Default pinctrl state
> +
> + pinctrl-1:
> + description: Can be Sleep or Wakeup pinctrl state
> +
> + pinctrl-2:
> + description: Can be Sleep or Wakeup pinctrl state
nit: change Sleep and Wakeup to be in quotes, i.e. "wakeup", "sleep"
Other than that, LTGM
Reviewed-by: Kendall Willis <k-willis@ti.com>
> +
> + pinctrl-names:
> + description:
> + When present should contain at least "default" describing the default pin
> + states. Other states are "sleep" which describes the pinstate when
> + sleeping and "wakeup" describing the pins if wakeup is enabled.
> + minItems: 1
> + items:
> + - const: default
> + - const: sleep
> + - const: wakeup
> +
> power-domains:
> description:
> Power domain provider node and an args specifier containing
> @@ -122,6 +142,11 @@ properties:
> minItems: 1
> maxItems: 2
>
> + wakeup-source:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + List of phandles to system idle states in which mcan can wakeup the system.
> +
> required:
> - compatible
> - reg
>
next prev parent reply other threads:[~2025-09-02 19:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-20 12:42 [PATCH v9 0/4] can: m_can: Add am62 wakeup support Markus Schneider-Pargmann
2025-08-20 12:42 ` [PATCH v9 1/4] dt-bindings: can: m_can: Add wakeup properties Markus Schneider-Pargmann
2025-08-22 14:35 ` Rob Herring
2025-08-27 8:04 ` Markus Schneider-Pargmann
2025-09-09 9:01 ` Markus Schneider-Pargmann
2025-09-02 19:59 ` Kendall Willis [this message]
2025-08-20 12:42 ` [PATCH v9 2/4] can: m_can: Map WoL to device_set_wakeup_enable Markus Schneider-Pargmann
2025-09-09 18:54 ` Kendall Willis
2025-08-20 12:42 ` [PATCH v9 3/4] can: m_can: Return ERR_PTR on error in allocation Markus Schneider-Pargmann
2025-09-04 9:08 ` Dhruva Gole
2025-09-09 18:53 ` Kendall Willis
2025-08-20 12:42 ` [PATCH v9 4/4] can: m_can: Support pinctrl wakeup state Markus Schneider-Pargmann
2025-09-04 9:05 ` Dhruva Gole
2025-09-09 18:57 ` Kendall Willis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=33a285bc-2fbe-4ff6-ae09-e4c13a098647@ti.com \
--to=k-willis@ti.com \
--cc=a-kaur@ti.com \
--cc=conor+dt@kernel.org \
--cc=d-gole@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=horms@kernel.org \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=mkl@pengutronix.de \
--cc=msp@baylibre.com \
--cc=rcsekar@samsung.com \
--cc=robh@kernel.org \
--cc=sebin.francis@ti.com \
--cc=vishalm@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox