(unknown),

(unknown),

[kedari appana]

Hi,

 if i type the below command i am getting the following errors
# ip link show can0
2: can0: <NOARP40000> mtu 16 qdisc noop qlen 10
    link/[280]
#cat /proc/interrupts
in this i am not getting entry for my can interrupt handler
#./canconfig can0 bitrate 50000 ctrlmode triple-sampling on
this command was successfull but when i debugging it is showing  can0:
bit-timing not yet defined

#If i use ifconfig can0 up
error is can0: bit-timing not yet defined
ifconfig: SIOCSIFFLAGS: Invalid argument
Please help me what is the problem.
regards,
Kedar.

Re:

[Wolfgang Grandegger]

On 05/08/2013 08:25 AM, kedari appana wrote:
> Hi,
> 
>  if i type the below command i am getting the following errors
> # ip link show can0
> 2: can0: <NOARP40000> mtu 16 qdisc noop qlen 10
>     link/[280]

That's a strange output. Where does the "40000" come from? Maybe you are
using an old version of the "ip" program. The command shown below should
report:

  # ip link help
  ...
  TYPE := { vlan | veth | vcan | dummy | ifb | macvlan | can }

If you don't see "can", it's the wrong version.

> #cat /proc/interrupts
> in this i am not getting entry for my can interrupt handler

The device must be started to have the interrupt line requested. Please read

http://lxr.free-electrons.com/source/Documentation/networking/can.txt#L747

on how to use the "ip" program for CAN.

> #./canconfig can0 bitrate 50000 ctrlmode triple-sampling on
> this command was successfull but when i debugging it is showing  can0:
> bit-timing not yet defined
> 
> #If i use ifconfig can0 up
> error is can0: bit-timing not yet defined
> ifconfig: SIOCSIFFLAGS: Invalid argument
> Please help me what is the problem.

Your tools seem not to work properly. What does

 # canconfig can0

print out? Anyway, please try using "ip" in the first place.

Please do not repeat the same question multiple times. It does usually
not help in getting an answer more quickly.

Wolfgang.

Re:

[kedari appana]

Hi,

                Thanks for the help.I successfully compiled the
canutilities and iproute2 utilities and all are working file except
canconfig command
when i type ./canconfig can0 bitrate 50000
Inconsistency detected by ld.so: dl-deps.c: 622: _dl_map_object_deps:
Assertion `nlist > 1' failed!

i am getting the above error how to overcome it.

Regards,
Kedar.

Re:

[Yegor Yefremov]

On Wed, May 8, 2013 at 8:25 AM, kedari appana <kedare06@gmail.com> wrote:
> Hi,
>
>  if i type the below command i am getting the following errors
> # ip link show can0
> 2: can0: <NOARP40000> mtu 16 qdisc noop qlen 10
>     link/[280]
> #cat /proc/interrupts
> in this i am not getting entry for my can interrupt handler
> #./canconfig can0 bitrate 50000 ctrlmode triple-sampling on
> this command was successfull but when i debugging it is showing  can0:
> bit-timing not yet defined
>
> #If i use ifconfig can0 up
> error is can0: bit-timing not yet defined
> ifconfig: SIOCSIFFLAGS: Invalid argument
> Please help me what is the problem.

In this thread there is a presentation slides for iproute2 and
canutils cross-compilation:
http://e2e.ti.com/support/arm/sitara_arm/f/791/p/154560/899055.aspx.
Presentation file is
d_can_on_Beaglebone.pptx.

Or just take http://buildroot.uclibc.org/ and create your rootfs with
it. can-utils and iproute2 (must be explicitly activated to disable
the one from BusyBox, that AFAIK doesn't support CAN routines) are
already there.

Yegor

RE:

[Unify Loan Company]

Do you need business or personal loan? Reply back with details

RE:

[Qin's Yanjun]

How are you today and your family? I require your attention and honest
co-operation about some issues which i will really want to discuss with you
which.  Looking forward to read from you soon.  

Qin's


______________________________

Sky Silk, http://aknet.kz

Re:

[Amos Kalonzo]

Attn:

I am wondering why You haven't respond to my email for some days now.
reference to my client's contract balance payment of (11.7M,USD)
Kindly get back to me for more details.

Best Regards

Amos Kalonzo