* CANutilities
@ 2013-05-15 7:00 kedari appana
[not found] ` <CANdmM3MkAN9tZLUDSnVrdXTngu7CH5UESUAo7NO4u85D0Hg2tQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 13+ messages in thread
From: kedari appana @ 2013-05-15 7:00 UTC (permalink / raw)
To: Marc Kleine-Budde,
linux-can-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
socketcan-users-0fE9KPoRgkgATYTw5x5z8w
Hi,
when i try to run the below command i am getting the error
./canconfig can0 bitrate 100000 ctrlmode triple-sampling on loopback on
1c
can0 bitrate: 100000, sample-point: 0.875
RTNETLINK answers: Operation not supported
can0: failed to set ctrlmode
How to overcome it
Regards,
kedar
^ permalink raw reply [flat|nested] 13+ messages in thread[parent not found: <CANdmM3MkAN9tZLUDSnVrdXTngu7CH5UESUAo7NO4u85D0Hg2tQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: CANutilities [not found] ` <CANdmM3MkAN9tZLUDSnVrdXTngu7CH5UESUAo7NO4u85D0Hg2tQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2013-05-15 7:15 ` Marc Kleine-Budde [not found] ` <5193360F.3040609-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> 0 siblings, 1 reply; 13+ messages in thread From: Marc Kleine-Budde @ 2013-05-15 7:15 UTC (permalink / raw) To: kedari appana Cc: socketcan-users-0fE9KPoRgkgATYTw5x5z8w, linux-can-u79uwXL29TY76Z2rM5mHXA@public.gmane.org [-- Attachment #1.1: Type: text/plain, Size: 689 bytes --] On 05/15/2013 09:00 AM, kedari appana wrote: > Hi, > when i try to run the below command i am getting the error > ./canconfig can0 bitrate 100000 ctrlmode triple-sampling on loopback on > 1c > can0 bitrate: 100000, sample-point: 0.875 > RTNETLINK answers: Operation not supported > can0: failed to set ctrlmode > > How to overcome it Are you running canconfig as root? Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | [-- Attachment #1.2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 263 bytes --] [-- Attachment #2: Type: text/plain, Size: 190 bytes --] _______________________________________________ Socketcan-users mailing list Socketcan-users-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org https://lists.berlios.de/mailman/listinfo/socketcan-users ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <5193360F.3040609-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]
* Re: CANutilities [not found] ` <5193360F.3040609-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> @ 2013-05-15 7:39 ` kedari appana 2013-05-15 7:43 ` CANutilities Marc Kleine-Budde 0 siblings, 1 reply; 13+ messages in thread From: kedari appana @ 2013-05-15 7:39 UTC (permalink / raw) To: Marc Kleine-Budde Cc: socketcan-users-0fE9KPoRgkgATYTw5x5z8w, linux-can-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Hi Marc, I am running as a root.my hardware don't support triple sampling mode is there any issue with that? Regards, Kedar. On Wed, May 15, 2013 at 12:45 PM, Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> wrote: > On 05/15/2013 09:00 AM, kedari appana wrote: >> Hi, >> when i try to run the below command i am getting the error >> ./canconfig can0 bitrate 100000 ctrlmode triple-sampling on loopback on >> 1c >> can0 bitrate: 100000, sample-point: 0.875 >> RTNETLINK answers: Operation not supported >> can0: failed to set ctrlmode >> >> How to overcome it > > Are you running canconfig as root? > > Marc > > -- > Pengutronix e.K. | Marc Kleine-Budde | > Industrial Linux Solutions | Phone: +49-231-2826-924 | > Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | > Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: CANutilities 2013-05-15 7:39 ` CANutilities kedari appana @ 2013-05-15 7:43 ` Marc Kleine-Budde 2013-05-15 8:21 ` CANutilities kedari appana 0 siblings, 1 reply; 13+ messages in thread From: Marc Kleine-Budde @ 2013-05-15 7:43 UTC (permalink / raw) To: kedari appana; +Cc: linux-can@vger.kernel.org [-- Attachment #1: Type: text/plain, Size: 462 bytes --] On 05/15/2013 09:39 AM, kedari appana wrote: > I am running as a root.my hardware don't support triple sampling mode > is there any issue with that? What's your hardware? Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 263 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: CANutilities 2013-05-15 7:43 ` CANutilities Marc Kleine-Budde @ 2013-05-15 8:21 ` kedari appana 2013-05-15 8:24 ` CANutilities Marc Kleine-Budde 0 siblings, 1 reply; 13+ messages in thread From: kedari appana @ 2013-05-15 8:21 UTC (permalink / raw) To: Marc Kleine-Budde; +Cc: linux-can@vger.kernel.org Hi, xilinx canps regards, Kedar. On Wed, May 15, 2013 at 1:13 PM, Marc Kleine-Budde <mkl@pengutronix.de> wrote: > On 05/15/2013 09:39 AM, kedari appana wrote: >> I am running as a root.my hardware don't support triple sampling mode >> is there any issue with that? > > What's your hardware? > > Marc > > -- > Pengutronix e.K. | Marc Kleine-Budde | > Industrial Linux Solutions | Phone: +49-231-2826-924 | > Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | > Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: CANutilities 2013-05-15 8:21 ` CANutilities kedari appana @ 2013-05-15 8:24 ` Marc Kleine-Budde 2013-05-15 8:52 ` CANutilities kedari appana 0 siblings, 1 reply; 13+ messages in thread From: Marc Kleine-Budde @ 2013-05-15 8:24 UTC (permalink / raw) To: kedari appana; +Cc: linux-can@vger.kernel.org [-- Attachment #1: Type: text/plain, Size: 434 bytes --] On 05/15/2013 10:21 AM, kedari appana wrote: > xilinx canps If your hardware doesn't support triple sampling, why are you trying to active it? Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 263 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: CANutilities 2013-05-15 8:24 ` CANutilities Marc Kleine-Budde @ 2013-05-15 8:52 ` kedari appana 2013-05-15 8:57 ` CANutilities Marc Kleine-Budde 0 siblings, 1 reply; 13+ messages in thread From: kedari appana @ 2013-05-15 8:52 UTC (permalink / raw) To: Marc Kleine-Budde; +Cc: linux-can@vger.kernel.org hi Marc, if i try without triple sampling on and just this command #./canconfig can0 bitrate 100000 ctrlmode loopback on 1c can0 bitrate: 100000, sample-point: 0.875 RTNETLINK answers: Operation not supported can0: failed to set ctrlmode the same error i am getting what was the issue. Regards, Kedar. On Wed, May 15, 2013 at 1:54 PM, Marc Kleine-Budde <mkl@pengutronix.de> wrote: > On 05/15/2013 10:21 AM, kedari appana wrote: >> xilinx canps > > If your hardware doesn't support triple sampling, why are you trying to > active it? > > Marc > > -- > Pengutronix e.K. | Marc Kleine-Budde | > Industrial Linux Solutions | Phone: +49-231-2826-924 | > Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | > Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: CANutilities 2013-05-15 8:52 ` CANutilities kedari appana @ 2013-05-15 8:57 ` Marc Kleine-Budde 2013-05-15 8:59 ` CANutilities kedari appana 0 siblings, 1 reply; 13+ messages in thread From: Marc Kleine-Budde @ 2013-05-15 8:57 UTC (permalink / raw) To: kedari appana; +Cc: linux-can@vger.kernel.org [-- Attachment #1: Type: text/plain, Size: 686 bytes --] On 05/15/2013 10:52 AM, kedari appana wrote: > if i try without triple sampling on > and just this command #./canconfig can0 bitrate 100000 ctrlmode loopback on > > 1c > can0 bitrate: 100000, sample-point: 0.875 > RTNETLINK answers: Operation not supported > can0: failed to set ctrlmode > the same error i am getting what was the issue. Does your hardware/driver support loopback mode? Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 263 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: CANutilities 2013-05-15 8:57 ` CANutilities Marc Kleine-Budde @ 2013-05-15 8:59 ` kedari appana 2013-05-15 8:59 ` CANutilities Marc Kleine-Budde 2013-05-15 9:00 ` CANutilities kedari appana 0 siblings, 2 replies; 13+ messages in thread From: kedari appana @ 2013-05-15 8:59 UTC (permalink / raw) To: Marc Kleine-Budde; +Cc: linux-can@vger.kernel.org yes On Wed, May 15, 2013 at 2:27 PM, Marc Kleine-Budde <mkl@pengutronix.de> wrote: > On 05/15/2013 10:52 AM, kedari appana wrote: >> if i try without triple sampling on >> and just this command #./canconfig can0 bitrate 100000 ctrlmode loopback on >> >> 1c >> can0 bitrate: 100000, sample-point: 0.875 >> RTNETLINK answers: Operation not supported >> can0: failed to set ctrlmode >> the same error i am getting what was the issue. > > Does your hardware/driver support loopback mode? > > Marc > > -- > Pengutronix e.K. | Marc Kleine-Budde | > Industrial Linux Solutions | Phone: +49-231-2826-924 | > Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | > Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: CANutilities 2013-05-15 8:59 ` CANutilities kedari appana @ 2013-05-15 8:59 ` Marc Kleine-Budde 2013-05-15 9:00 ` CANutilities kedari appana 1 sibling, 0 replies; 13+ messages in thread From: Marc Kleine-Budde @ 2013-05-15 8:59 UTC (permalink / raw) To: kedari appana; +Cc: linux-can@vger.kernel.org [-- Attachment #1: Type: text/plain, Size: 361 bytes --] On 05/15/2013 10:59 AM, kedari appana wrote: > yes Show us the driver. Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 263 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: CANutilities 2013-05-15 8:59 ` CANutilities kedari appana 2013-05-15 8:59 ` CANutilities Marc Kleine-Budde @ 2013-05-15 9:00 ` kedari appana 2013-05-15 9:03 ` CANutilities kedari appana 1 sibling, 1 reply; 13+ messages in thread From: kedari appana @ 2013-05-15 9:00 UTC (permalink / raw) To: Marc Kleine-Budde; +Cc: linux-can@vger.kernel.org yes it supports loopback mode and silent mode.I tried with the ip command and as well as with the canconfig command same error as mentioned above i am getting On Wed, May 15, 2013 at 2:29 PM, kedari appana <kedare06@gmail.com> wrote: > yes > > On Wed, May 15, 2013 at 2:27 PM, Marc Kleine-Budde <mkl@pengutronix.de> wrote: >> On 05/15/2013 10:52 AM, kedari appana wrote: >>> if i try without triple sampling on >>> and just this command #./canconfig can0 bitrate 100000 ctrlmode loopback on >>> >>> 1c >>> can0 bitrate: 100000, sample-point: 0.875 >>> RTNETLINK answers: Operation not supported >>> can0: failed to set ctrlmode >>> the same error i am getting what was the issue. >> >> Does your hardware/driver support loopback mode? >> >> Marc >> >> -- >> Pengutronix e.K. | Marc Kleine-Budde | >> Industrial Linux Solutions | Phone: +49-231-2826-924 | >> Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | >> Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | >> ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: CANutilities 2013-05-15 9:00 ` CANutilities kedari appana @ 2013-05-15 9:03 ` kedari appana 2013-05-15 9:07 ` CANutilities Marc Kleine-Budde 0 siblings, 1 reply; 13+ messages in thread From: kedari appana @ 2013-05-15 9:03 UTC (permalink / raw) To: Marc Kleine-Budde; +Cc: linux-can@vger.kernel.org Hi , I am unable to send that code to you it supports loopback mode the driver is under developing and i am the driver developer .Please tell me the fix Regards, Kedar. On Wed, May 15, 2013 at 2:30 PM, kedari appana <kedare06@gmail.com> wrote: > yes it supports loopback mode and silent mode.I tried with the ip > command and as well as with the canconfig command same error as > mentioned above i am getting > > On Wed, May 15, 2013 at 2:29 PM, kedari appana <kedare06@gmail.com> wrote: >> yes >> >> On Wed, May 15, 2013 at 2:27 PM, Marc Kleine-Budde <mkl@pengutronix.de> wrote: >>> On 05/15/2013 10:52 AM, kedari appana wrote: >>>> if i try without triple sampling on >>>> and just this command #./canconfig can0 bitrate 100000 ctrlmode loopback on >>>> >>>> 1c >>>> can0 bitrate: 100000, sample-point: 0.875 >>>> RTNETLINK answers: Operation not supported >>>> can0: failed to set ctrlmode >>>> the same error i am getting what was the issue. >>> >>> Does your hardware/driver support loopback mode? >>> >>> Marc >>> >>> -- >>> Pengutronix e.K. | Marc Kleine-Budde | >>> Industrial Linux Solutions | Phone: +49-231-2826-924 | >>> Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | >>> Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | >>> ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: CANutilities 2013-05-15 9:03 ` CANutilities kedari appana @ 2013-05-15 9:07 ` Marc Kleine-Budde 0 siblings, 0 replies; 13+ messages in thread From: Marc Kleine-Budde @ 2013-05-15 9:07 UTC (permalink / raw) To: kedari appana; +Cc: linux-can@vger.kernel.org [-- Attachment #1: Type: text/plain, Size: 611 bytes --] On 05/15/2013 11:03 AM, kedari appana wrote: > I am unable to send that code to you it supports loopback mode the > driver is under developing and i am the driver developer .Please tell > me the fix I don't mind looking at a driver which is still under development. Without the code, it's not easy to debug. regards, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 263 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2013-05-15 9:07 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-15 7:00 CANutilities kedari appana
[not found] ` <CANdmM3MkAN9tZLUDSnVrdXTngu7CH5UESUAo7NO4u85D0Hg2tQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-05-15 7:15 ` CANutilities Marc Kleine-Budde
[not found] ` <5193360F.3040609-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-05-15 7:39 ` CANutilities kedari appana
2013-05-15 7:43 ` CANutilities Marc Kleine-Budde
2013-05-15 8:21 ` CANutilities kedari appana
2013-05-15 8:24 ` CANutilities Marc Kleine-Budde
2013-05-15 8:52 ` CANutilities kedari appana
2013-05-15 8:57 ` CANutilities Marc Kleine-Budde
2013-05-15 8:59 ` CANutilities kedari appana
2013-05-15 8:59 ` CANutilities Marc Kleine-Budde
2013-05-15 9:00 ` CANutilities kedari appana
2013-05-15 9:03 ` CANutilities kedari appana
2013-05-15 9:07 ` CANutilities Marc Kleine-Budde
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox