Canutils can not up can0

Canutils can not up can0

[grommerin]

Hello. I downloaded your utility canutils and installed it on i.MX6 
MarsBoard but I can not configure and run the CAN interface. Usually I 
used to do it "canconfig" of other version "canutils" but in your 
version of this file is not. How can I configure CAN bitrate with your 
tool? Best regards, Dzivakou Mikita.

Re: Canutils can not up can0

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 809 bytes --]

On 07/22/2014 01:32 PM, grommerin wrote:
> Hello. I downloaded your utility canutils and installed it on i.MX6
> MarsBoard but I can not configure and run the CAN interface. Usually I
> used to do it "canconfig" of other version "canutils" but in your
> version of this file is not. How can I configure CAN bitrate with your
> tool? Best regards, Dzivakou Mikita.

Which version of cantuils are you using? Which version of canutils are
working for you? Do you get any error messages? What's the output of
"dmesg"?

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 242 bytes --]

Re: Canutils can not up can0

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 837 bytes --]

Mikita,

please keep the mailing list on Cc.

On 07/22/2014 02:10 PM, grommerin wrote:
> Now I try using this version:
> https://gitorious.org/linux-can/can-utils/source/518faef3acc79bb4f31ae2b55b266eb540850f39:

There is no canconfig in the gitoruous can-utils.

> Working version: git://git.pengutronix.de/git/tools/canutils.git
> No error messages. The problem is that I can not configure can0 and set
> bitrate.
> I can not attach a message "dmesg". "ifconfig" sees can0 but it is not
> configured.

Which canconfig are you using?

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 242 bytes --]

Re: Canutils can not up can0

[Yegor Yefremov]

On Tue, Jul 22, 2014 at 2:20 PM, Marc Kleine-Budde <mkl@pengutronix.de> wrote:
> Mikita,
>
> please keep the mailing list on Cc.
>
> On 07/22/2014 02:10 PM, grommerin wrote:
>> Now I try using this version:
>> https://gitorious.org/linux-can/can-utils/source/518faef3acc79bb4f31ae2b55b266eb540850f39:
>
> There is no canconfig in the gitoruous can-utils.
>
>> Working version: git://git.pengutronix.de/git/tools/canutils.git
>> No error messages. The problem is that I can not configure can0 and set
>> bitrate.
>> I can not attach a message "dmesg". "ifconfig" sees can0 but it is not
>> configured.
>
> Which canconfig are you using?

Please take a look at our turorial
http://elinux.org/Bringing_CAN_interface_up too.

Yegor