From: Paulo Alcantara <pc@manguebit.com>
To: smfrench@gmail.com
Cc: linux-cifs@vger.kernel.org, Paulo Alcantara <pc@manguebit.com>
Subject: [PATCH v2 6/9] smb: client: fix hardlinking of reparse points
Date: Sat, 25 Nov 2023 23:55:07 -0300 [thread overview]
Message-ID: <20231126025510.28147-7-pc@manguebit.com> (raw)
In-Reply-To: <20231126025510.28147-1-pc@manguebit.com>
The client was sending an SMB2_CREATE request without setting
OPEN_REPARSE_POINT flag thus failing the entire hardlink operation.
Fix this by setting OPEN_REPARSE_POINT in create options for
SMB2_CREATE request when the source inode is a repase point.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
---
fs/smb/client/cifsglob.h | 8 +++++---
fs/smb/client/cifsproto.h | 8 +++++---
fs/smb/client/cifssmb.c | 9 +++++----
fs/smb/client/link.c | 4 ++--
fs/smb/client/smb2inode.c | 34 ++++++++++++++++++++++------------
fs/smb/client/smb2proto.h | 8 +++++---
6 files changed, 44 insertions(+), 27 deletions(-)
diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h
index 7ceea52058ab..50fedc2513c3 100644
--- a/fs/smb/client/cifsglob.h
+++ b/fs/smb/client/cifsglob.h
@@ -405,9 +405,11 @@ struct smb_version_operations {
const char *from_name, const char *to_name,
struct cifs_sb_info *cifs_sb);
/* send create hardlink request */
- int (*create_hardlink)(const unsigned int, struct cifs_tcon *,
- const char *, const char *,
- struct cifs_sb_info *);
+ int (*create_hardlink)(const unsigned int xid,
+ struct cifs_tcon *tcon,
+ struct dentry *source_dentry,
+ const char *from_name, const char *to_name,
+ struct cifs_sb_info *cifs_sb);
/* query symlink target */
int (*query_symlink)(const unsigned int xid,
struct cifs_tcon *tcon,
diff --git a/fs/smb/client/cifsproto.h b/fs/smb/client/cifsproto.h
index e680fe46d4e8..afbab86331a1 100644
--- a/fs/smb/client/cifsproto.h
+++ b/fs/smb/client/cifsproto.h
@@ -447,9 +447,11 @@ extern int CIFSSMBRenameOpenFile(const unsigned int xid, struct cifs_tcon *tcon,
int netfid, const char *target_name,
const struct nls_table *nls_codepage,
int remap_special_chars);
-extern int CIFSCreateHardLink(const unsigned int xid, struct cifs_tcon *tcon,
- const char *from_name, const char *to_name,
- struct cifs_sb_info *cifs_sb);
+int CIFSCreateHardLink(const unsigned int xid,
+ struct cifs_tcon *tcon,
+ struct dentry *source_dentry,
+ const char *from_name, const char *to_name,
+ struct cifs_sb_info *cifs_sb);
extern int CIFSUnixCreateHardLink(const unsigned int xid,
struct cifs_tcon *tcon,
const char *fromName, const char *toName,
diff --git a/fs/smb/client/cifssmb.c b/fs/smb/client/cifssmb.c
index 43a90e646a7a..5331fda8b013 100644
--- a/fs/smb/client/cifssmb.c
+++ b/fs/smb/client/cifssmb.c
@@ -2528,10 +2528,11 @@ CIFSUnixCreateHardLink(const unsigned int xid, struct cifs_tcon *tcon,
return rc;
}
-int
-CIFSCreateHardLink(const unsigned int xid, struct cifs_tcon *tcon,
- const char *from_name, const char *to_name,
- struct cifs_sb_info *cifs_sb)
+int CIFSCreateHardLink(const unsigned int xid,
+ struct cifs_tcon *tcon,
+ struct dentry *source_dentry,
+ const char *from_name, const char *to_name,
+ struct cifs_sb_info *cifs_sb)
{
int rc = 0;
NT_RENAME_REQ *pSMB = NULL;
diff --git a/fs/smb/client/link.c b/fs/smb/client/link.c
index 82fb069c6ce4..d86da949a919 100644
--- a/fs/smb/client/link.c
+++ b/fs/smb/client/link.c
@@ -510,8 +510,8 @@ cifs_hardlink(struct dentry *old_file, struct inode *inode,
rc = -ENOSYS;
goto cifs_hl_exit;
}
- rc = server->ops->create_hardlink(xid, tcon, from_name, to_name,
- cifs_sb);
+ rc = server->ops->create_hardlink(xid, tcon, old_file,
+ from_name, to_name, cifs_sb);
if ((rc == -EIO) || (rc == -EINVAL))
rc = -EOPNOTSUPP;
}
diff --git a/fs/smb/client/smb2inode.c b/fs/smb/client/smb2inode.c
index 956f74328860..1a19b0cc34d7 100644
--- a/fs/smb/client/smb2inode.c
+++ b/fs/smb/client/smb2inode.c
@@ -43,6 +43,18 @@ static struct reparse_data_buffer *reparse_buf_ptr(struct kvec *iov)
return buf;
}
+static inline __u32 file_create_options(struct dentry *dentry)
+{
+ struct cifsInodeInfo *ci;
+
+ if (dentry) {
+ ci = CIFS_I(d_inode(dentry));
+ if (ci->reparse)
+ return OPEN_REPARSE_POINT;
+ }
+ return 0;
+}
+
/*
* note: If cfile is passed, the reference to it is dropped here.
* So make sure that you do not reuse cfile after return from this func.
@@ -919,15 +931,10 @@ int smb2_rename_path(const unsigned int xid,
const char *from_name, const char *to_name,
struct cifs_sb_info *cifs_sb)
{
- struct cifsInodeInfo *ci;
+
struct cifsFileInfo *cfile;
- __u32 co = 0;
+ __u32 co = file_create_options(source_dentry);
- if (source_dentry) {
- ci = CIFS_I(d_inode(source_dentry));
- if (ci->reparse)
- co |= OPEN_REPARSE_POINT;
- }
drop_cached_dir_by_name(xid, tcon, from_name, cifs_sb);
cifs_get_writable_path(tcon, from_name, FIND_WR_WITH_DELETE, &cfile);
@@ -935,13 +942,16 @@ int smb2_rename_path(const unsigned int xid,
co, DELETE, SMB2_OP_RENAME, cfile);
}
-int
-smb2_create_hardlink(const unsigned int xid, struct cifs_tcon *tcon,
- const char *from_name, const char *to_name,
- struct cifs_sb_info *cifs_sb)
+int smb2_create_hardlink(const unsigned int xid,
+ struct cifs_tcon *tcon,
+ struct dentry *source_dentry,
+ const char *from_name, const char *to_name,
+ struct cifs_sb_info *cifs_sb)
{
+ __u32 co = file_create_options(source_dentry);
+
return smb2_set_path_attr(xid, tcon, from_name, to_name,
- cifs_sb, 0, FILE_READ_ATTRIBUTES,
+ cifs_sb, co, FILE_READ_ATTRIBUTES,
SMB2_OP_HARDLINK, NULL);
}
diff --git a/fs/smb/client/smb2proto.h b/fs/smb/client/smb2proto.h
index 5e68ddc7b422..3639588709a2 100644
--- a/fs/smb/client/smb2proto.h
+++ b/fs/smb/client/smb2proto.h
@@ -91,9 +91,11 @@ int smb2_rename_path(const unsigned int xid,
struct dentry *source_dentry,
const char *from_name, const char *to_name,
struct cifs_sb_info *cifs_sb);
-extern int smb2_create_hardlink(const unsigned int xid, struct cifs_tcon *tcon,
- const char *from_name, const char *to_name,
- struct cifs_sb_info *cifs_sb);
+int smb2_create_hardlink(const unsigned int xid,
+ struct cifs_tcon *tcon,
+ struct dentry *source_dentry,
+ const char *from_name, const char *to_name,
+ struct cifs_sb_info *cifs_sb);
extern int smb3_create_mf_symlink(unsigned int xid, struct cifs_tcon *tcon,
struct cifs_sb_info *cifs_sb, const unsigned char *path,
char *pbuf, unsigned int *pbytes_written);
--
2.43.0
next prev parent reply other threads:[~2023-11-26 2:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-26 2:55 [PATCH v2 0/9] reparse points work Paulo Alcantara
2023-11-26 2:55 ` [PATCH v2 1/9] smb: client: extend smb2_compound_op() to accept more commands Paulo Alcantara
2023-11-26 2:55 ` [PATCH v2 2/9] smb: client: allow creating special files via reparse points Paulo Alcantara
2023-11-26 2:55 ` [PATCH v2 3/9] smb: client: allow creating symlinks " Paulo Alcantara
2023-11-26 2:55 ` [PATCH v2 4/9] smb: client: optimise reparse point querying Paulo Alcantara
2023-11-26 2:55 ` [PATCH v2 5/9] smb: client: fix renaming of reparse points Paulo Alcantara
2023-11-26 2:55 ` Paulo Alcantara [this message]
2023-11-26 2:55 ` [PATCH v2 7/9] smb: client: cleanup smb2_query_reparse_point() Paulo Alcantara
2023-11-26 2:55 ` [PATCH v2 8/9] smb: client: optimise dentry revalidation for reparse points Paulo Alcantara
2023-11-26 2:55 ` [PATCH v2 9/9] smb: client: fix missing mode bits for SMB symlinks Paulo Alcantara
2023-11-27 4:28 ` [PATCH v2 0/9] reparse points work Steve French
2023-11-27 10:14 ` Paulo Alcantara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231126025510.28147-7-pc@manguebit.com \
--to=pc@manguebit.com \
--cc=linux-cifs@vger.kernel.org \
--cc=smfrench@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox