* [PATCH AUTOSEL 6.12 21/29] ksmbd: retry iterate_dir in smb2_query_dir
[not found] <20241220171130.511389-1-sashal@kernel.org>
@ 2024-12-20 17:11 ` Sasha Levin
2024-12-20 17:11 ` [PATCH AUTOSEL 6.12 22/29] ksmbd: set ATTR_CTIME flags when setting mtime Sasha Levin
2024-12-20 17:11 ` [PATCH AUTOSEL 6.12 23/29] smb: client: destroy cfid_put_wq on module exit Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2024-12-20 17:11 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Hobin Woo, Sungjong Seo, Namjae Jeon, Yoonho Shin, Steve French,
Sasha Levin, sfrench, linux-cifs
From: Hobin Woo <hobin.woo@samsung.com>
[ Upstream commit 2b904d61a97e8ba79e3bc216ba290fd7e1d85028 ]
Some file systems do not ensure that the single call of iterate_dir
reaches the end of the directory. For example, FUSE fetches entries from
a daemon using 4KB buffer and stops fetching if entries exceed the
buffer. And then an actor of caller, KSMBD, is used to fill the entries
from the buffer.
Thus, pattern searching on FUSE, files located after the 4KB could not
be found and STATUS_NO_SUCH_FILE was returned.
Signed-off-by: Hobin Woo <hobin.woo@samsung.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Yoonho Shin <yoonho.shin@samsung.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/smb/server/smb2pdu.c | 12 +++++++++++-
fs/smb/server/vfs.h | 1 +
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c
index d0836d710f18..80cfaa1b4e01 100644
--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -4224,6 +4224,7 @@ static bool __query_dir(struct dir_context *ctx, const char *name, int namlen,
/* dot and dotdot entries are already reserved */
if (!strcmp(".", name) || !strcmp("..", name))
return true;
+ d_info->num_scan++;
if (ksmbd_share_veto_filename(priv->work->tcon->share_conf, name))
return true;
if (!match_pattern(name, namlen, priv->search_pattern))
@@ -4384,8 +4385,17 @@ int smb2_query_dir(struct ksmbd_work *work)
query_dir_private.info_level = req->FileInformationClass;
dir_fp->readdir_data.private = &query_dir_private;
set_ctx_actor(&dir_fp->readdir_data.ctx, __query_dir);
-
+again:
+ d_info.num_scan = 0;
rc = iterate_dir(dir_fp->filp, &dir_fp->readdir_data.ctx);
+ /*
+ * num_entry can be 0 if the directory iteration stops before reaching
+ * the end of the directory and no file is matched with the search
+ * pattern.
+ */
+ if (rc >= 0 && !d_info.num_entry && d_info.num_scan &&
+ d_info.out_buf_len > 0)
+ goto again;
/*
* req->OutputBufferLength is too small to contain even one entry.
* In this case, it immediately returns OutputBufferLength 0 to client.
diff --git a/fs/smb/server/vfs.h b/fs/smb/server/vfs.h
index cb76f4b5bafe..06903024a2d8 100644
--- a/fs/smb/server/vfs.h
+++ b/fs/smb/server/vfs.h
@@ -43,6 +43,7 @@ struct ksmbd_dir_info {
char *rptr;
int name_len;
int out_buf_len;
+ int num_scan;
int num_entry;
int data_count;
int last_entry_offset;
--
2.39.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH AUTOSEL 6.12 22/29] ksmbd: set ATTR_CTIME flags when setting mtime
[not found] <20241220171130.511389-1-sashal@kernel.org>
2024-12-20 17:11 ` [PATCH AUTOSEL 6.12 21/29] ksmbd: retry iterate_dir in smb2_query_dir Sasha Levin
@ 2024-12-20 17:11 ` Sasha Levin
2024-12-20 17:11 ` [PATCH AUTOSEL 6.12 23/29] smb: client: destroy cfid_put_wq on module exit Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2024-12-20 17:11 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Namjae Jeon, David Disseldorp, Steve French, Sasha Levin, sfrench,
linux-cifs
From: Namjae Jeon <linkinjeon@kernel.org>
[ Upstream commit 21e46a79bbe6c4e1aa73b3ed998130f2ff07b128 ]
David reported that the new warning from setattr_copy_mgtime is coming
like the following.
[ 113.215316] ------------[ cut here ]------------
[ 113.215974] WARNING: CPU: 1 PID: 31 at fs/attr.c:300 setattr_copy+0x1ee/0x200
[ 113.219192] CPU: 1 UID: 0 PID: 31 Comm: kworker/1:1 Not tainted 6.13.0-rc1+ #234
[ 113.220127] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[ 113.221530] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[ 113.222220] RIP: 0010:setattr_copy+0x1ee/0x200
[ 113.222833] Code: 24 28 49 8b 44 24 30 48 89 53 58 89 43 6c 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 48 89 df e8 77 d6 ff ff e9 cd fe ff ff <0f> 0b e9 be fe ff ff 66 0
[ 113.225110] RSP: 0018:ffffaf218010fb68 EFLAGS: 00010202
[ 113.225765] RAX: 0000000000000120 RBX: ffffa446815f8568 RCX: 0000000000000003
[ 113.226667] RDX: ffffaf218010fd38 RSI: ffffa446815f8568 RDI: ffffffff94eb03a0
[ 113.227531] RBP: ffffaf218010fb90 R08: 0000001a251e217d R09: 00000000675259fa
[ 113.228426] R10: 0000000002ba8a6d R11: ffffa4468196c7a8 R12: ffffaf218010fd38
[ 113.229304] R13: 0000000000000120 R14: ffffffff94eb03a0 R15: 0000000000000000
[ 113.230210] FS: 0000000000000000(0000) GS:ffffa44739d00000(0000) knlGS:0000000000000000
[ 113.231215] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 113.232055] CR2: 00007efe0053d27e CR3: 000000000331a000 CR4: 00000000000006b0
[ 113.232926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 113.233812] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 113.234797] Call Trace:
[ 113.235116] <TASK>
[ 113.235393] ? __warn+0x73/0xd0
[ 113.235802] ? setattr_copy+0x1ee/0x200
[ 113.236299] ? report_bug+0xf3/0x1e0
[ 113.236757] ? handle_bug+0x4d/0x90
[ 113.237202] ? exc_invalid_op+0x13/0x60
[ 113.237689] ? asm_exc_invalid_op+0x16/0x20
[ 113.238185] ? setattr_copy+0x1ee/0x200
[ 113.238692] btrfs_setattr+0x80/0x820 [btrfs]
[ 113.239285] ? get_stack_info_noinstr+0x12/0xf0
[ 113.239857] ? __module_address+0x22/0xa0
[ 113.240368] ? handle_ksmbd_work+0x6e/0x460 [ksmbd]
[ 113.240993] ? __module_text_address+0x9/0x50
[ 113.241545] ? __module_address+0x22/0xa0
[ 113.242033] ? unwind_next_frame+0x10e/0x920
[ 113.242600] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 113.243268] notify_change+0x2c2/0x4e0
[ 113.243746] ? stack_depot_save_flags+0x27/0x730
[ 113.244339] ? set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.244993] set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.245613] ? process_scheduled_works+0xbe/0x310
[ 113.246181] ? worker_thread+0x100/0x240
[ 113.246696] ? kthread+0xc8/0x100
[ 113.247126] ? ret_from_fork+0x2b/0x40
[ 113.247606] ? ret_from_fork_asm+0x1a/0x30
[ 113.248132] smb2_set_info+0x63f/0xa70 [ksmbd]
ksmbd is trying to set the atime and mtime via notify_change without also
setting the ctime. so This patch add ATTR_CTIME flags when setting mtime
to avoid a warning.
Reported-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/smb/server/smb2pdu.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c
index 80cfaa1b4e01..e03d784148e6 100644
--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -6016,15 +6016,13 @@ static int set_file_basic_info(struct ksmbd_file *fp,
attrs.ia_valid |= (ATTR_ATIME | ATTR_ATIME_SET);
}
- attrs.ia_valid |= ATTR_CTIME;
if (file_info->ChangeTime)
- attrs.ia_ctime = ksmbd_NTtimeToUnix(file_info->ChangeTime);
- else
- attrs.ia_ctime = inode_get_ctime(inode);
+ inode_set_ctime_to_ts(inode,
+ ksmbd_NTtimeToUnix(file_info->ChangeTime));
if (file_info->LastWriteTime) {
attrs.ia_mtime = ksmbd_NTtimeToUnix(file_info->LastWriteTime);
- attrs.ia_valid |= (ATTR_MTIME | ATTR_MTIME_SET);
+ attrs.ia_valid |= (ATTR_MTIME | ATTR_MTIME_SET | ATTR_CTIME);
}
if (file_info->Attributes) {
@@ -6066,8 +6064,6 @@ static int set_file_basic_info(struct ksmbd_file *fp,
return -EACCES;
inode_lock(inode);
- inode_set_ctime_to_ts(inode, attrs.ia_ctime);
- attrs.ia_valid &= ~ATTR_CTIME;
rc = notify_change(idmap, dentry, &attrs, NULL);
inode_unlock(inode);
}
--
2.39.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH AUTOSEL 6.12 23/29] smb: client: destroy cfid_put_wq on module exit
[not found] <20241220171130.511389-1-sashal@kernel.org>
2024-12-20 17:11 ` [PATCH AUTOSEL 6.12 21/29] ksmbd: retry iterate_dir in smb2_query_dir Sasha Levin
2024-12-20 17:11 ` [PATCH AUTOSEL 6.12 22/29] ksmbd: set ATTR_CTIME flags when setting mtime Sasha Levin
@ 2024-12-20 17:11 ` Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2024-12-20 17:11 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Enzo Matsumiya, Steve French, Sasha Levin, sfrench, linux-cifs,
samba-technical
From: Enzo Matsumiya <ematsumiya@suse.de>
[ Upstream commit 633609c48a358134d3f8ef8241dff24841577f58 ]
Fix potential problem in rmmod
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/smb/client/cifsfs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/smb/client/cifsfs.c b/fs/smb/client/cifsfs.c
index bf909c2f6b96..0ceebde38f9f 100644
--- a/fs/smb/client/cifsfs.c
+++ b/fs/smb/client/cifsfs.c
@@ -2018,6 +2018,7 @@ exit_cifs(void)
destroy_workqueue(decrypt_wq);
destroy_workqueue(fileinfo_put_wq);
destroy_workqueue(serverclose_wq);
+ destroy_workqueue(cfid_put_wq);
destroy_workqueue(cifsiod_wq);
cifs_proc_clean();
}
--
2.39.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-12-20 17:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20241220171130.511389-1-sashal@kernel.org>
2024-12-20 17:11 ` [PATCH AUTOSEL 6.12 21/29] ksmbd: retry iterate_dir in smb2_query_dir Sasha Levin
2024-12-20 17:11 ` [PATCH AUTOSEL 6.12 22/29] ksmbd: set ATTR_CTIME flags when setting mtime Sasha Levin
2024-12-20 17:11 ` [PATCH AUTOSEL 6.12 23/29] smb: client: destroy cfid_put_wq on module exit Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox