[PATCH AUTOSEL 6.13 29/34] cifs: Fix encoding of SMB1 Session Setup Kerberos Request in non-UNICODE mode

[PATCH AUTOSEL 6.13 29/34] cifs: Fix encoding of SMB1 Session Setup Kerberos Request in non-UNICODE mode

[Sasha Levin]

From: Pali Rohár <pali@kernel.org>

[ Upstream commit 16cb6b0509b65ac89187e9402e0b7a9ddf1765ef ]

Like in UNICODE mode, SMB1 Session Setup Kerberos Request contains oslm and
domain strings.

Extract common code into ascii_oslm_strings() and ascii_domain_string()
functions (similar to unicode variants) and use these functions in
non-UNICODE code path in sess_auth_kerberos().

Decision if non-UNICODE or UNICODE mode is used is based on the
SMBFLG2_UNICODE flag in Flags2 packed field, and not based on the
capabilities of server. Fix this check too.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/sess.c | 60 +++++++++++++++++++++++++++++---------------
 1 file changed, 40 insertions(+), 20 deletions(-)

diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c
index faa80e7d54a6e..4ca00f14872a3 100644
--- a/fs/smb/client/sess.c
+++ b/fs/smb/client/sess.c
@@ -672,6 +672,22 @@ unicode_oslm_strings(char **pbcc_area, const struct nls_table *nls_cp)
 	*pbcc_area = bcc_ptr;
 }
 
+static void
+ascii_oslm_strings(char **pbcc_area, const struct nls_table *nls_cp)
+{
+	char *bcc_ptr = *pbcc_area;
+
+	strcpy(bcc_ptr, "Linux version ");
+	bcc_ptr += strlen("Linux version ");
+	strcpy(bcc_ptr, init_utsname()->release);
+	bcc_ptr += strlen(init_utsname()->release) + 1;
+
+	strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
+	bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
+
+	*pbcc_area = bcc_ptr;
+}
+
 static void unicode_domain_string(char **pbcc_area, struct cifs_ses *ses,
 				   const struct nls_table *nls_cp)
 {
@@ -696,6 +712,25 @@ static void unicode_domain_string(char **pbcc_area, struct cifs_ses *ses,
 	*pbcc_area = bcc_ptr;
 }
 
+static void ascii_domain_string(char **pbcc_area, struct cifs_ses *ses,
+				const struct nls_table *nls_cp)
+{
+	char *bcc_ptr = *pbcc_area;
+	int len;
+
+	/* copy domain */
+	if (ses->domainName != NULL) {
+		len = strscpy(bcc_ptr, ses->domainName, CIFS_MAX_DOMAINNAME_LEN);
+		if (WARN_ON_ONCE(len < 0))
+			len = CIFS_MAX_DOMAINNAME_LEN - 1;
+		bcc_ptr += len;
+	} /* else we send a null domain name so server will default to its own domain */
+	*bcc_ptr = 0;
+	bcc_ptr++;
+
+	*pbcc_area = bcc_ptr;
+}
+
 static void unicode_ssetup_strings(char **pbcc_area, struct cifs_ses *ses,
 				   const struct nls_table *nls_cp)
 {
@@ -741,25 +776,10 @@ static void ascii_ssetup_strings(char **pbcc_area, struct cifs_ses *ses,
 	*bcc_ptr = 0;
 	bcc_ptr++; /* account for null termination */
 
-	/* copy domain */
-	if (ses->domainName != NULL) {
-		len = strscpy(bcc_ptr, ses->domainName, CIFS_MAX_DOMAINNAME_LEN);
-		if (WARN_ON_ONCE(len < 0))
-			len = CIFS_MAX_DOMAINNAME_LEN - 1;
-		bcc_ptr += len;
-	} /* else we send a null domain name so server will default to its own domain */
-	*bcc_ptr = 0;
-	bcc_ptr++;
-
 	/* BB check for overflow here */
 
-	strcpy(bcc_ptr, "Linux version ");
-	bcc_ptr += strlen("Linux version ");
-	strcpy(bcc_ptr, init_utsname()->release);
-	bcc_ptr += strlen(init_utsname()->release) + 1;
-
-	strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
-	bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
+	ascii_domain_string(&bcc_ptr, ses, nls_cp);
+	ascii_oslm_strings(&bcc_ptr, nls_cp);
 
 	*pbcc_area = bcc_ptr;
 }
@@ -1562,7 +1582,7 @@ sess_auth_kerberos(struct sess_data *sess_data)
 	sess_data->iov[1].iov_len = msg->secblob_len;
 	pSMB->req.SecurityBlobLength = cpu_to_le16(sess_data->iov[1].iov_len);
 
-	if (ses->capabilities & CAP_UNICODE) {
+	if (pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) {
 		/* unicode strings must be word aligned */
 		if (!IS_ALIGNED(sess_data->iov[0].iov_len + sess_data->iov[1].iov_len, 2)) {
 			*bcc_ptr = 0;
@@ -1571,8 +1591,8 @@ sess_auth_kerberos(struct sess_data *sess_data)
 		unicode_oslm_strings(&bcc_ptr, sess_data->nls_cp);
 		unicode_domain_string(&bcc_ptr, ses, sess_data->nls_cp);
 	} else {
-		/* BB: is this right? */
-		ascii_ssetup_strings(&bcc_ptr, ses, sess_data->nls_cp);
+		ascii_oslm_strings(&bcc_ptr, sess_data->nls_cp);
+		ascii_domain_string(&bcc_ptr, ses, sess_data->nls_cp);
 	}
 
 	sess_data->iov[2].iov_len = (long) bcc_ptr -
-- 
2.39.5

[PATCH AUTOSEL 6.13 31/34] cifs: Fix querying of WSL CHR and BLK reparse points over SMB1

[Sasha Levin]

From: Pali Rohár <pali@kernel.org>

[ Upstream commit ef86ab131d9127dfbfa8f06e12441d05fdfb090b ]

When reparse point in SMB1 query_path_info() callback was detected then
query also for EA $LXDEV. In this EA are stored device major and minor
numbers used by WSL CHR and BLK reparse points. Without major and minor
numbers, stat() syscall does not work for char and block devices.

Similar code is already in SMB2+ query_path_info() callback function.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/smb1ops.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/fs/smb/client/smb1ops.c b/fs/smb/client/smb1ops.c
index bd791aa54681f..55cceb8229323 100644
--- a/fs/smb/client/smb1ops.c
+++ b/fs/smb/client/smb1ops.c
@@ -597,6 +597,42 @@ static int cifs_query_path_info(const unsigned int xid,
 			CIFSSMBClose(xid, tcon, fid.netfid);
 	}
 
+#ifdef CONFIG_CIFS_XATTR
+	/*
+	 * For WSL CHR and BLK reparse points it is required to fetch
+	 * EA $LXDEV which contains major and minor device numbers.
+	 */
+	if (!rc && data->reparse_point) {
+		struct smb2_file_full_ea_info *ea;
+
+		ea = (struct smb2_file_full_ea_info *)data->wsl.eas;
+		rc = CIFSSMBQAllEAs(xid, tcon, full_path, SMB2_WSL_XATTR_DEV,
+				    &ea->ea_data[SMB2_WSL_XATTR_NAME_LEN + 1],
+				    SMB2_WSL_XATTR_DEV_SIZE, cifs_sb);
+		if (rc == SMB2_WSL_XATTR_DEV_SIZE) {
+			ea->next_entry_offset = cpu_to_le32(0);
+			ea->flags = 0;
+			ea->ea_name_length = SMB2_WSL_XATTR_NAME_LEN;
+			ea->ea_value_length = cpu_to_le16(SMB2_WSL_XATTR_DEV_SIZE);
+			memcpy(&ea->ea_data[0], SMB2_WSL_XATTR_DEV, SMB2_WSL_XATTR_NAME_LEN + 1);
+			data->wsl.eas_len = sizeof(*ea) + SMB2_WSL_XATTR_NAME_LEN + 1 +
+					    SMB2_WSL_XATTR_DEV_SIZE;
+			rc = 0;
+		} else if (rc >= 0) {
+			/* It is an error if EA $LXDEV has wrong size. */
+			rc = -EINVAL;
+		} else {
+			/*
+			 * In all other cases ignore error if fetching
+			 * of EA $LXDEV failed. It is needed only for
+			 * WSL CHR and BLK reparse points and wsl_to_fattr()
+			 * handle the case when EA is missing.
+			 */
+			rc = 0;
+		}
+	}
+#endif
+
 	return rc;
 }
 
-- 
2.39.5