[PATCH v2] clk: qcom: a53-pll: convert to use parent_data rather than parent_names

[PATCH v2] clk: qcom: a53-pll: convert to use parent_data rather than parent_names

[Dmitry Baryshkov]

Change a53-pll driver to use clk_parent_data rather than always looking
up the xo clock in the system clock list.

Note, this change also switches the a53-pll from the global `xo' clock
to the `xo_board', the clock that is specified as the `xo' clock in the
DT file.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes since v1:
 - Added a note regarding xo -> xo_board change (Bjorn)

---
 drivers/clk/qcom/a53-pll.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c
index 329d2c5356d8..f9c5e296dba2 100644
--- a/drivers/clk/qcom/a53-pll.c
+++ b/drivers/clk/qcom/a53-pll.c
@@ -127,7 +127,9 @@ static int qcom_a53pll_probe(struct platform_device *pdev)
 	if (!init.name)
 		return -ENOMEM;
 
-	init.parent_names = (const char *[]){ "xo" };
+	init.parent_data = &(const struct clk_parent_data){
+		.fw_name = "xo", .name = "xo_board",
+	};
 	init.num_parents = 1;
 	init.ops = &clk_pll_sr2_ops;
 	pll->clkr.hw.init = &init;
-- 
2.35.1

Re: [PATCH v2] clk: qcom: a53-pll: convert to use parent_data rather than parent_names

[Bjorn Andersson]

On Fri, 9 Sep 2022 13:31:37 +0300, Dmitry Baryshkov wrote:
> Change a53-pll driver to use clk_parent_data rather than always looking
> up the xo clock in the system clock list.
> 
> Note, this change also switches the a53-pll from the global `xo' clock
> to the `xo_board', the clock that is specified as the `xo' clock in the
> DT file.
> 
> [...]

Applied, thanks!

[1/1] clk: qcom: a53-pll: convert to use parent_data rather than parent_names
      commit: 867bc3269ee430f5c822967e7b5a37a0ca959443

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>