public inbox for linux-clk@vger.kernel.org
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Chuan Liu via B4 Relay <devnull+chuan.liu.amlogic.com@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
	 Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>,
	 Kevin Hilman <khilman@baylibre.com>,
	 Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	 chuan.liu@amlogic.com, linux-amlogic@lists.infradead.org,
	 linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/3] clk: meson: Support PLL with fixed fractional denominators
Date: Fri, 06 Sep 2024 13:22:57 +0200	[thread overview]
Message-ID: <1jjzfpqb5a.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <20240906-fix_clk-v2-1-7a3941eb2cdf@amlogic.com> (Chuan Liu via's message of "Fri, 06 Sep 2024 18:34:40 +0800")

On Fri 06 Sep 2024 at 18:34, Chuan Liu via B4 Relay <devnull+chuan.liu.amlogic.com@kernel.org> wrote:

> From: Chuan Liu <chuan.liu@amlogic.com>
>
> Some PLLS with fractional multipliers have fractional denominators with
> fixed values, instead of the previous "(1 << pll-> frc.width)".
>
> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
> ---
>  drivers/clk/meson/clk-pll.c | 8 +++++---
>  drivers/clk/meson/clk-pll.h | 1 +
>  2 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
> index bc570a2ff3a3..a141ab450009 100644
> --- a/drivers/clk/meson/clk-pll.c
> +++ b/drivers/clk/meson/clk-pll.c
> @@ -57,12 +57,13 @@ static unsigned long __pll_params_to_rate(unsigned long parent_rate,
>  					  struct meson_clk_pll_data *pll)
>  {
>  	u64 rate = (u64)parent_rate * m;
> +	unsigned int frac_max = unlikely(pll->frac_max) ? pll->frac_max
> :
                                 ^ Please don't play with this unless
                                 you've got justification a for it.

By justification, I mean actual numbers showing the difference it makes
and not just for the platforms listed in this series, but all the
platforms supported by this driver.

> +							  (1 << pll->frac.width);
>  
>  	if (frac && MESON_PARM_APPLICABLE(&pll->frac)) {
>  		u64 frac_rate = (u64)parent_rate * frac;
>  
> -		rate += DIV_ROUND_UP_ULL(frac_rate,
> -					 (1 << pll->frac.width));
> +		rate += DIV_ROUND_UP_ULL(frac_rate, frac_max);
>  	}
>  
>  	return DIV_ROUND_UP_ULL(rate, n);
> @@ -100,7 +101,8 @@ static unsigned int __pll_params_with_frac(unsigned long rate,
>  					   unsigned int n,
>  					   struct meson_clk_pll_data *pll)
>  {
> -	unsigned int frac_max = (1 << pll->frac.width);
> +	unsigned int frac_max = unlikely(pll->frac_max) ? pll->frac_max :
> +							  (1 << pll->frac.width);
>  	u64 val = (u64)rate * n;
>  
>  	/* Bail out if we are already over the requested rate */
> diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h
> index 7b6b87274073..949157fb7bf5 100644
> --- a/drivers/clk/meson/clk-pll.h
> +++ b/drivers/clk/meson/clk-pll.h
> @@ -43,6 +43,7 @@ struct meson_clk_pll_data {
>  	unsigned int init_count;
>  	const struct pll_params_table *table;
>  	const struct pll_mult_range *range;
> +	unsigned int frac_max;
>  	u8 flags;
>  };

-- 
Jerome

  reply	other threads:[~2024-09-06 11:23 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-06 10:34 [PATCH v2 0/3] clk: meson: Fix an issue with inaccurate hifi_pll frequency Chuan Liu via B4 Relay
2024-09-06 10:34 ` [PATCH v2 1/3] clk: meson: Support PLL with fixed fractional denominators Chuan Liu via B4 Relay
2024-09-06 11:22   ` Jerome Brunet [this message]
2024-09-09  1:55     ` Chuan Liu
2024-09-09  7:40       ` Jerome Brunet
2024-09-09  8:46         ` Chuan Liu
2024-09-09  8:50           ` Jerome Brunet
2024-09-06 10:34 ` [PATCH v2 2/3] clk: meson: c3: pll: fix frac maximum value for hifi_pll Chuan Liu via B4 Relay
2024-09-06 10:34 ` [PATCH v2 3/3] clk: meson: s4: " Chuan Liu via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1jjzfpqb5a.fsf@starbuckisacylon.baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=chuan.liu@amlogic.com \
    --cc=devnull+chuan.liu.amlogic.com@kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mturquette@baylibre.com \
    --cc=neil.armstrong@linaro.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox