[PATCH 3/8] drm/vc4: hdmi: Properly compute the BVB clock rate

[Maxime Ripard <maxime@cerno.tech>]

The BVB clock rate computation doesn't take into account a mode clock of
594MHz that we're going to need to support 4k60.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index eee9751009c2..b5bc742993a4 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -91,7 +91,6 @@
 # define VC4_HD_M_ENABLE			BIT(0)
 
 #define CEC_CLOCK_FREQ 40000
-#define VC4_HSM_MID_CLOCK 149985000
 
 #define HDMI_14_MAX_TMDS_CLK   (340 * 1000 * 1000)
 
@@ -739,7 +738,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 		conn_state_to_vc4_hdmi_conn_state(conn_state);
 	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
-	unsigned long pixel_rate, hsm_rate;
+	unsigned long bvb_rate, pixel_rate, hsm_rate;
 	int ret;
 
 	ret = pm_runtime_get_sync(&vc4_hdmi->pdev->dev);
@@ -793,12 +792,8 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 
 	vc4_hdmi_cec_update_clk_div(vc4_hdmi);
 
-	/*
-	 * FIXME: When the pixel freq is 594MHz (4k60), this needs to be setup
-	 * at 300MHz.
-	 */
-	ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock,
-			       (hsm_rate > VC4_HSM_MID_CLOCK ? 150000000 : 75000000));
+	bvb_rate = roundup(mode->clock * 1000 / 2, 75000000);
+	ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock, bvb_rate);
 	if (ret) {
 		DRM_ERROR("Failed to set pixel bvb clock rate: %d\n", ret);
 		clk_disable_unprepare(vc4_hdmi->hsm_clock);
-- 
2.29.2