[PATCH v5 09/26] drm: sun4i: de3: pass engine reference to ccsc setup function

[Ryan Walklin <ryan@testtoast.com>]

From: Jernej Skrabec <jernej.skrabec@gmail.com>

Configuration of the DE3 colorspace and dynamic range correction module
requires knowledge of the current video format and encoding.

Pass the display engine by reference to the csc setup function, rather
than the register map alone, to allow access to this information.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
---
 drivers/gpu/drm/sun4i/sun8i_csc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_csc.c b/drivers/gpu/drm/sun4i/sun8i_csc.c
index 68d955c63b05b..8a336ccb27d33 100644
--- a/drivers/gpu/drm/sun4i/sun8i_csc.c
+++ b/drivers/gpu/drm/sun4i/sun8i_csc.c
@@ -148,17 +148,19 @@ static void sun8i_csc_setup(struct regmap *map, u32 base,
 	regmap_write(map, SUN8I_CSC_CTRL(base), val);
 }
 
-static void sun8i_de3_ccsc_setup(struct regmap *map, int layer,
+static void sun8i_de3_ccsc_setup(struct sunxi_engine *engine, int layer,
 				 enum format_type fmt_type,
 				 enum drm_color_encoding encoding,
 				 enum drm_color_range range)
 {
 	u32 addr, val, mask;
+	struct regmap *map;
 	const u32 *table;
 	int i;
 
 	mask = SUN50I_MIXER_BLEND_CSC_CTL_EN(layer);
 	table = yuv2rgb_de3[range][encoding];
+	map = engine->regs;
 
 	switch (fmt_type) {
 	case FORMAT_TYPE_RGB:
@@ -204,7 +206,7 @@ void sun8i_csc_set_ccsc(struct sun8i_mixer *mixer, int layer,
 	u32 base;
 
 	if (mixer->cfg->is_de3) {
-		sun8i_de3_ccsc_setup(mixer->engine.regs, layer,
+		sun8i_de3_ccsc_setup(&mixer->engine, layer,
 				     fmt_type, encoding, range);
 		return;
 	}
-- 
2.46.1