[PATCH] clk: keystone: syscon-clk: Do not use syscon helper to build regmap

[Andrew Davis <afd@ti.com>]

The syscon helper device_node_to_regmap() is used to fetch a regmap
registered to a device node. It also currently creates this regmap
if the node did not already have a regmap associated with it. This
should only be used on "syscon" nodes. This driver is not such a
device and instead uses device_node_to_regmap() on its own node as
a hacky way to create a regmap for itself.

This will not work going forward and so we should create our regmap
the normal way by defining our regmap_config, fetching our memory
resource, then using the normal regmap_init_mmio() function.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/clk/keystone/syscon-clk.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/keystone/syscon-clk.c b/drivers/clk/keystone/syscon-clk.c
index 935d9a2d8c2b3..073c2ebcdf6af 100644
--- a/drivers/clk/keystone/syscon-clk.c
+++ b/drivers/clk/keystone/syscon-clk.c
@@ -105,6 +105,12 @@ static struct clk_hw
 	return &priv->hw;
 }
 
+static const struct regmap_config ti_syscon_regmap_cfg = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
 static int ti_syscon_gate_clk_probe(struct platform_device *pdev)
 {
 	const struct ti_syscon_gate_clk_data *data, *p;
@@ -113,12 +119,18 @@ static int ti_syscon_gate_clk_probe(struct platform_device *pdev)
 	int num_clks, num_parents, i;
 	const char *parent_name;
 	struct regmap *regmap;
+	void __iomem *base;
 
 	data = device_get_match_data(dev);
 	if (!data)
 		return -EINVAL;
 
-	regmap = device_node_to_regmap(dev->of_node);
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return dev_err_probe(dev, PTR_ERR(base),
+				     "failed to get base memory resource\n");
+
+	regmap = regmap_init_mmio(dev, base, &ti_syscon_regmap_cfg);
 	if (IS_ERR(regmap))
 		return dev_err_probe(dev, PTR_ERR(regmap),
 				     "failed to get regmap\n");
-- 
2.39.2