[PATCH] clk: qcom: camcc-nord: Correct camera clock source tables

[Taniya Das <taniya.das@oss.qualcomm.com>]

Select the PLL0 odd output for the 200 MHz and 400 MHz CAMNOC RT
AXI rates.  Use PLL0 main output dividers for the 300 MHz and 400 MHz
CPHY RX rates.

CSID and IFE Lite use the CPHY RX rates, so share that table rather
than duplicating it.  Remove the unsupported 300 MHz CSI PHY timer
rate.

Fixes: 7647815dfc8f ("clk: qcom: camcc: Add support for camera clock controller for Nord")
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
---
 drivers/clk/qcom/camcc-nord.c | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/clk/qcom/camcc-nord.c b/drivers/clk/qcom/camcc-nord.c
index 9e3c40cb3ad5f06196bab87593afb7d1c7da411d..1c1314340b92f03af442b82a6402e442f1550a2c 100644
--- a/drivers/clk/qcom/camcc-nord.c
+++ b/drivers/clk/qcom/camcc-nord.c
@@ -515,8 +515,8 @@ static const struct clk_parent_data cam_cc_parent_data_9[] = {
 };
 
 static const struct freq_tbl ftbl_cam_cc_camnoc_rt_axi_clk_src[] = {
-	F(300000000, P_CAM_CC_PLL0_OUT_EVEN, 2, 0, 0),
-	F(400000000, P_CAM_CC_PLL0_OUT_MAIN, 3, 0, 0),
+	F(200000000, P_CAM_CC_PLL0_OUT_ODD, 2, 0, 0),
+	F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
 	{ }
 };
 
@@ -622,8 +622,8 @@ static struct clk_rcg2 cam_cc_cci_4_clk_src = {
 };
 
 static const struct freq_tbl ftbl_cam_cc_cphy_rx_clk_src[] = {
-	F(300000000, P_CAM_CC_PLL0_OUT_EVEN, 2, 0, 0),
-	F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
+	F(300000000, P_CAM_CC_PLL0_OUT_MAIN, 4, 0, 0),
+	F(400000000, P_CAM_CC_PLL0_OUT_MAIN, 3, 0, 0),
 	F(480000000, P_CAM_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
 	{ }
 };
@@ -645,7 +645,6 @@ static struct clk_rcg2 cam_cc_cphy_rx_clk_src = {
 };
 
 static const struct freq_tbl ftbl_cam_cc_csi0phytimer_clk_src[] = {
-	F(300000000, P_CAM_CC_PLL0_OUT_EVEN, 2, 0, 0),
 	F(400000000, P_CAM_CC_PLL0_OUT_ODD, 1, 0, 0),
 	{ }
 };
@@ -730,19 +729,12 @@ static struct clk_rcg2 cam_cc_csi4phytimer_clk_src = {
 	},
 };
 
-static const struct freq_tbl ftbl_cam_cc_csid_clk_src[] = {
-	F(300000000, P_CAM_CC_PLL0_OUT_MAIN, 4, 0, 0),
-	F(400000000, P_CAM_CC_PLL0_OUT_MAIN, 3, 0, 0),
-	F(480000000, P_CAM_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
-	{ }
-};
-
 static struct clk_rcg2 cam_cc_csid_clk_src = {
 	.cmd_rcgr = 0x13214,
 	.mnd_width = 0,
 	.hid_width = 5,
 	.parent_map = cam_cc_parent_map_1,
-	.freq_tbl = ftbl_cam_cc_csid_clk_src,
+	.freq_tbl = ftbl_cam_cc_cphy_rx_clk_src,
 	.hw_clk_ctrl = true,
 	.clkr.hw.init = &(const struct clk_init_data) {
 		.name = "cam_cc_csid_clk_src",
@@ -889,7 +881,7 @@ static struct clk_rcg2 cam_cc_ife_lite_clk_src = {
 	.mnd_width = 0,
 	.hid_width = 5,
 	.parent_map = cam_cc_parent_map_1,
-	.freq_tbl = ftbl_cam_cc_csid_clk_src,
+	.freq_tbl = ftbl_cam_cc_cphy_rx_clk_src,
 	.hw_clk_ctrl = true,
 	.clkr.hw.init = &(const struct clk_init_data) {
 		.name = "cam_cc_ife_lite_clk_src",
@@ -905,7 +897,7 @@ static struct clk_rcg2 cam_cc_ife_lite_csid_clk_src = {
 	.mnd_width = 0,
 	.hid_width = 5,
 	.parent_map = cam_cc_parent_map_1,
-	.freq_tbl = ftbl_cam_cc_csid_clk_src,
+	.freq_tbl = ftbl_cam_cc_cphy_rx_clk_src,
 	.hw_clk_ctrl = true,
 	.clkr.hw.init = &(const struct clk_init_data) {
 		.name = "cam_cc_ife_lite_csid_clk_src",

---
base-commit: f5f84daefcd92d7a630066635ecea1433ed5eac7
change-id: 20260926-fix_camcc-7f03083c0bc5

Best regards,
-- 
Taniya Das <taniya.das@oss.qualcomm.com>