Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 30/03/2024 10:30, Varadarajan Narayanan wrote:
> On Fri, Mar 29, 2024 at 01:10:03PM +0100, Krzysztof Kozlowski wrote:
>> On 29/03/2024 11:55, Varadarajan Narayanan wrote:
>>>>> +
>>>>> +enum {
>>>>> +       ICC_ANOC_PCIE0,
>>>>> +       ICC_SNOC_PCIE0,
>>>>> +       ICC_ANOC_PCIE1,
>>>>> +       ICC_SNOC_PCIE1,
>>>>> +       ICC_ANOC_PCIE2,
>>>>> +       ICC_SNOC_PCIE2,
>>>>> +       ICC_ANOC_PCIE3,
>>>>> +       ICC_SNOC_PCIE3,
>>>>> +       ICC_SNOC_USB,
>>>>> +       ICC_ANOC_USB_AXI,
>>>>> +       ICC_NSSNOC_NSSCC,
>>>>> +       ICC_NSSNOC_SNOC_0,
>>>>> +       ICC_NSSNOC_SNOC_1,
>>>>> +       ICC_NSSNOC_PCNOC_1,
>>>>> +       ICC_NSSNOC_QOSGEN_REF,
>>>>> +       ICC_NSSNOC_TIMEOUT_REF,
>>>>> +       ICC_NSSNOC_XO_DCD,
>>>>> +       ICC_NSSNOC_ATB,
>>>>> +       ICC_MEM_NOC_NSSNOC,
>>>>> +       ICC_NSSNOC_MEMNOC,
>>>>> +       ICC_NSSNOC_MEM_NOC_1,
>>>>> +};
>>>>
>>>> Are these supposed to be in a dt-binding header?
>>>
>>> Since these don't directly relate to the ids in the dt-bindings
>>> not sure if they will be permitted there. Will move and post a
>>> new version and get feedback.
>>
>> You can answer this by yourself by looking at your DTS. Do you use them
>> as well in the DTS?
> 
> I can use them in the DTS. The icc-clk framework automatically
> creates master and slave nodes as 'n' and 'n+1'. Hence I can have
> something like this in the dt-bindings include file
> 
> 	#define ICC_ANOC_PCIE0		0
> 	#define ICC_SNOC_PCIE0		1
> 		.
> 		.
> 		.
> 	#define ICC_NSSNOC_MEM_NOC_1	20
> 
> 	#define MASTER(x)	((ICC_ ## x) * 2)
> 	#define SLAVE(x)	(MASTER(x) + 1)

I don't understand this or maybe I misunderstood the purpose of this
define. It does not matter if you "can" use something in DT. The
question is: do you use them.

> 
>> It's a pity we see here only parts of DTS, instead of full interconnect
>> usage.
> 
> Unfortunately cannot include the pcie dts changes with this
> patch, but you can refer to them at https://lore.kernel.org/linux-arm-msm/20230519090219.15925-5-quic_devipriy@quicinc.com/
> 
> The above macros will be used in the pcie node as follows
> 
> pcie0: pci@28000000 {
> 	compatible = "qcom,pcie-ipq9574";
> 	. . .
> 	interconnects = <&gcc MASTER(ANOC_PCIE0) &gcc SLAVE(ANOC_PCIE0)>,
> 			<&gcc MASTER(SNOC_PCIE0) &gcc SLAVE(SNOC_PCIE0)>;
> 	interconnect-names = "pcie-mem", "cpu-pcie";

Then why did you add header which is not used?

I will respond there...

Best regards,
Krzysztof