Re: [PATCH] clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 3/11/24 16:06, Gabor Juhos wrote:
> Booting v6.8 results in a hang on various IPQ5018 based boards.
> Investigating the problem showed that the hang happens when the
> clk_alpha_pll_stromer_plus_set_rate() function tries to write
> into the PLL_MODE register of the APSS PLL.
> 
> Checking the downstream code revealed that it uses [1] stromer
> specific operations for IPQ5018, whereas in the current code
> the stromer plus specific operations are used.
> 
> The ops in the 'ipq_pll_stromer_plus' clock definition can't be
> changed since that is needed for IPQ5332, so add a new alpha pll
> clock declaration which uses the correct stromer ops and use this
> new clock for IPQ5018 to avoid the boot failure.
> 
> 1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c#L67
> 
> Cc: stable@vger.kernel.org
> Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018")
> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
> ---
> Based on v6.8.
> ---
>   drivers/clk/qcom/apss-ipq-pll.c | 20 +++++++++++++++++++-
>   1 file changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
> index 678b805f13d45..11f1ae59438f7 100644
> --- a/drivers/clk/qcom/apss-ipq-pll.c
> +++ b/drivers/clk/qcom/apss-ipq-pll.c
> @@ -55,6 +55,24 @@ static struct clk_alpha_pll ipq_pll_huayra = {
>   	},
>   };
>   
> +static struct clk_alpha_pll ipq_pll_stromer = {
> +	.offset = 0x0,
> +	.regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],

CLK_ALPHA_PLL_TYPE_STROMER?

[...]

>   static const struct apss_pll_data ipq5018_pll_data = {
>   	.pll_type = CLK_ALPHA_PLL_TYPE_STROMER_PLUS,

and here?

The L register differs, so the rattesetting done from Linux must
have never worked anyway?

Konrad