[PATCH v3 00/12] initial clock support for exynosauto v9 SoC

[PATCH v3 00/12] initial clock support for exynosauto v9 SoC

[Chanho Park]

This patchset adds initial clock driver support for Exynos Auto v9 SoC.
This driver is highly inspired from exynos850 clock driver. Like
exynos850, this does not use Q-channel control & Hardware automatic
clock gating. So, all the gate clocks will be controlled by CCF & CMU
driver.

Below CMU blocks are supported in this patchset and remains will be
implemented later.

- CMU_TOP
- CMU_BUSMC
- CMU_CORE
- CMU_FSYS2
- CMU_PERIC0
- CMU_PERIC1
- CMU_PERIS

Changes from v2:
- Correct include file path of dt-binding and use full-path
- Reorder clock nodes by unit address

Changes from v1:
- Adjust patch order to avoid dt-binding check bot's build warning
- Rename exynosautov9.h to samsung,exynosautov9.h (Suggested by
  Krzystof)
- clock nodes of exynosautov9.dtsi are aligned by unit address order.
- Each clock items are listed to every own line.
- Added Krzystof RB tags.

Chanho Park (12):
  dt-bindings: clock: add clock binding definitions for Exynos Auto v9
  dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings
  clk: samsung: add top clock support for Exynos Auto v9 SoC
  clk: samsung: exynosautov9: add cmu_core clock support
  clk: samsung: exynosautov9: add cmu_peris clock support
  clk: samsung: exynosautov9: add cmu_busmc clock support
  clk: samsung: exynosautov9: add cmu_fsys2 clock support
  clk: samsung: exynosautov9: add cmu_peric0 clock support
  clk: samsung: exynosautov9: add cmu_peric1 clock support
  arm64: dts: exynosautov9: add initial cmu clock nodes
  arm64: dts: exynosautov9: switch usi clocks
  arm64: dts: exynosautov9: switch ufs clock node

 .../clock/samsung,exynosautov9-clock.yaml     |  219 +++
 arch/arm64/boot/dts/exynos/exynosautov9.dtsi  |  115 +-
 drivers/clk/samsung/Makefile                  |    1 +
 drivers/clk/samsung/clk-exynosautov9.c        | 1733 +++++++++++++++++
 .../dt-bindings/clock/samsung,exynosautov9.h  |  299 +++
 5 files changed, 2342 insertions(+), 25 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
 create mode 100644 drivers/clk/samsung/clk-exynosautov9.c
 create mode 100644 include/dt-bindings/clock/samsung,exynosautov9.h

-- 
2.36.0

[PATCH v3 01/12] dt-bindings: clock: add clock binding definitions for Exynos Auto v9

[Chanho Park]

Add device tree clock binding definitions for below CMU blocks.

- CMU_TOP
- CMU_BUSMC
- CMU_CORE
- CMU_FYS2
- CMU_PERIC0 / C1
- CMU_PERIS

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 .../dt-bindings/clock/samsung,exynosautov9.h  | 299 ++++++++++++++++++
 1 file changed, 299 insertions(+)
 create mode 100644 include/dt-bindings/clock/samsung,exynosautov9.h

diff --git a/include/dt-bindings/clock/samsung,exynosautov9.h b/include/dt-bindings/clock/samsung,exynosautov9.h
new file mode 100644
index 000000000000..71ec0a955364
--- /dev/null
+++ b/include/dt-bindings/clock/samsung,exynosautov9.h
@@ -0,0 +1,299 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022 Samsung Electronics Co., Ltd.
+ * Author: Chanho Park <chanho61.park@samsung.com>
+ *
+ * Device Tree binding constants for Exynos Auto V9 clock controller.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H
+#define _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H
+
+/* CMU_TOP */
+#define FOUT_SHARED0_PLL		1
+#define FOUT_SHARED1_PLL		2
+#define FOUT_SHARED2_PLL		3
+#define FOUT_SHARED3_PLL		4
+#define FOUT_SHARED4_PLL		5
+
+/* MUX in CMU_TOP */
+#define MOUT_SHARED0_PLL		6
+#define MOUT_SHARED1_PLL		7
+#define MOUT_SHARED2_PLL		8
+#define MOUT_SHARED3_PLL		9
+#define MOUT_SHARED4_PLL		10
+#define MOUT_CLKCMU_CMU_BOOST		11
+#define MOUT_CLKCMU_CMU_CMUREF		12
+#define MOUT_CLKCMU_ACC_BUS		13
+#define MOUT_CLKCMU_APM_BUS		14
+#define MOUT_CLKCMU_AUD_CPU		15
+#define MOUT_CLKCMU_AUD_BUS		16
+#define MOUT_CLKCMU_BUSC_BUS		17
+#define MOUT_CLKCMU_BUSMC_BUS		19
+#define MOUT_CLKCMU_CORE_BUS		20
+#define MOUT_CLKCMU_CPUCL0_SWITCH	21
+#define MOUT_CLKCMU_CPUCL0_CLUSTER	22
+#define MOUT_CLKCMU_CPUCL1_SWITCH	24
+#define MOUT_CLKCMU_CPUCL1_CLUSTER	25
+#define MOUT_CLKCMU_DPTX_BUS		26
+#define MOUT_CLKCMU_DPTX_DPGTC		27
+#define MOUT_CLKCMU_DPUM_BUS		28
+#define MOUT_CLKCMU_DPUS0_BUS		29
+#define MOUT_CLKCMU_DPUS1_BUS		30
+#define MOUT_CLKCMU_FSYS0_BUS		31
+#define MOUT_CLKCMU_FSYS0_PCIE		32
+#define MOUT_CLKCMU_FSYS1_BUS		33
+#define MOUT_CLKCMU_FSYS1_USBDRD	34
+#define MOUT_CLKCMU_FSYS1_MMC_CARD	35
+#define MOUT_CLKCMU_FSYS2_BUS		36
+#define MOUT_CLKCMU_FSYS2_UFS_EMBD	37
+#define MOUT_CLKCMU_FSYS2_ETHERNET	38
+#define MOUT_CLKCMU_G2D_G2D		39
+#define MOUT_CLKCMU_G2D_MSCL		40
+#define MOUT_CLKCMU_G3D00_SWITCH	41
+#define MOUT_CLKCMU_G3D01_SWITCH	42
+#define MOUT_CLKCMU_G3D1_SWITCH		43
+#define MOUT_CLKCMU_ISPB_BUS		44
+#define MOUT_CLKCMU_MFC_MFC		45
+#define MOUT_CLKCMU_MFC_WFD		46
+#define MOUT_CLKCMU_MIF_SWITCH		47
+#define MOUT_CLKCMU_MIF_BUSP		48
+#define MOUT_CLKCMU_NPU_BUS		49
+#define MOUT_CLKCMU_PERIC0_BUS		50
+#define MOUT_CLKCMU_PERIC0_IP		51
+#define MOUT_CLKCMU_PERIC1_BUS		52
+#define MOUT_CLKCMU_PERIC1_IP		53
+#define MOUT_CLKCMU_PERIS_BUS		54
+
+/* DIV in CMU_TOP */
+#define DOUT_SHARED0_DIV3		101
+#define DOUT_SHARED0_DIV2		102
+#define DOUT_SHARED1_DIV3		103
+#define DOUT_SHARED1_DIV2		104
+#define DOUT_SHARED1_DIV4		105
+#define DOUT_SHARED2_DIV3		106
+#define DOUT_SHARED2_DIV2		107
+#define DOUT_SHARED2_DIV4		108
+#define DOUT_SHARED4_DIV2		109
+#define DOUT_SHARED4_DIV4		110
+#define DOUT_CLKCMU_CMU_BOOST		111
+#define DOUT_CLKCMU_ACC_BUS		112
+#define DOUT_CLKCMU_APM_BUS		113
+#define DOUT_CLKCMU_AUD_CPU		114
+#define DOUT_CLKCMU_AUD_BUS		115
+#define DOUT_CLKCMU_BUSC_BUS		116
+#define DOUT_CLKCMU_BUSMC_BUS		118
+#define DOUT_CLKCMU_CORE_BUS		119
+#define DOUT_CLKCMU_CPUCL0_SWITCH	120
+#define DOUT_CLKCMU_CPUCL0_CLUSTER	121
+#define DOUT_CLKCMU_CPUCL1_SWITCH	123
+#define DOUT_CLKCMU_CPUCL1_CLUSTER	124
+#define DOUT_CLKCMU_DPTX_BUS		125
+#define DOUT_CLKCMU_DPTX_DPGTC		126
+#define DOUT_CLKCMU_DPUM_BUS		127
+#define DOUT_CLKCMU_DPUS0_BUS		128
+#define DOUT_CLKCMU_DPUS1_BUS		129
+#define DOUT_CLKCMU_FSYS0_BUS		130
+#define DOUT_CLKCMU_FSYS0_PCIE		131
+#define DOUT_CLKCMU_FSYS1_BUS		132
+#define DOUT_CLKCMU_FSYS1_USBDRD	133
+#define DOUT_CLKCMU_FSYS2_BUS		134
+#define DOUT_CLKCMU_FSYS2_UFS_EMBD	135
+#define DOUT_CLKCMU_FSYS2_ETHERNET	136
+#define DOUT_CLKCMU_G2D_G2D		137
+#define DOUT_CLKCMU_G2D_MSCL		138
+#define DOUT_CLKCMU_G3D00_SWITCH	139
+#define DOUT_CLKCMU_G3D01_SWITCH	140
+#define DOUT_CLKCMU_G3D1_SWITCH		141
+#define DOUT_CLKCMU_ISPB_BUS		142
+#define DOUT_CLKCMU_MFC_MFC		143
+#define DOUT_CLKCMU_MFC_WFD		144
+#define DOUT_CLKCMU_MIF_SWITCH		145
+#define DOUT_CLKCMU_MIF_BUSP		146
+#define DOUT_CLKCMU_NPU_BUS		147
+#define DOUT_CLKCMU_PERIC0_BUS		148
+#define DOUT_CLKCMU_PERIC0_IP		149
+#define DOUT_CLKCMU_PERIC1_BUS		150
+#define DOUT_CLKCMU_PERIC1_IP		151
+#define DOUT_CLKCMU_PERIS_BUS		152
+
+/* GAT in CMU_TOP */
+#define GOUT_CLKCMU_CMU_BOOST		201
+#define GOUT_CLKCMU_CPUCL0_BOOST	202
+#define GOUT_CLKCMU_CPUCL1_BOOST	203
+#define GOUT_CLKCMU_CORE_BOOST		204
+#define GOUT_CLKCMU_BUSC_BOOST		205
+#define GOUT_CLKCMU_BUSMC_BOOST		206
+#define GOUT_CLKCMU_MIF_BOOST		207
+#define GOUT_CLKCMU_ACC_BUS		208
+#define GOUT_CLKCMU_APM_BUS		209
+#define GOUT_CLKCMU_AUD_CPU		210
+#define GOUT_CLKCMU_AUD_BUS		211
+#define GOUT_CLKCMU_BUSC_BUS		212
+#define GOUT_CLKCMU_BUSMC_BUS		214
+#define GOUT_CLKCMU_CORE_BUS		215
+#define GOUT_CLKCMU_CPUCL0_SWITCH	216
+#define GOUT_CLKCMU_CPUCL0_CLUSTER	217
+#define GOUT_CLKCMU_CPUCL1_SWITCH	219
+#define GOUT_CLKCMU_CPUCL1_CLUSTER	220
+#define GOUT_CLKCMU_DPTX_BUS		221
+#define GOUT_CLKCMU_DPTX_DPGTC		222
+#define GOUT_CLKCMU_DPUM_BUS		223
+#define GOUT_CLKCMU_DPUS0_BUS		224
+#define GOUT_CLKCMU_DPUS1_BUS		225
+#define GOUT_CLKCMU_FSYS0_BUS		226
+#define GOUT_CLKCMU_FSYS0_PCIE		227
+#define GOUT_CLKCMU_FSYS1_BUS		228
+#define GOUT_CLKCMU_FSYS1_USBDRD	229
+#define GOUT_CLKCMU_FSYS1_MMC_CARD	230
+#define GOUT_CLKCMU_FSYS2_BUS		231
+#define GOUT_CLKCMU_FSYS2_UFS_EMBD	232
+#define GOUT_CLKCMU_FSYS2_ETHERNET	233
+#define GOUT_CLKCMU_G2D_G2D		234
+#define GOUT_CLKCMU_G2D_MSCL		235
+#define GOUT_CLKCMU_G3D00_SWITCH	236
+#define GOUT_CLKCMU_G3D01_SWITCH	237
+#define GOUT_CLKCMU_G3D1_SWITCH		238
+#define GOUT_CLKCMU_ISPB_BUS		239
+#define GOUT_CLKCMU_MFC_MFC		240
+#define GOUT_CLKCMU_MFC_WFD		241
+#define GOUT_CLKCMU_MIF_SWITCH		242
+#define GOUT_CLKCMU_MIF_BUSP		243
+#define GOUT_CLKCMU_NPU_BUS		244
+#define GOUT_CLKCMU_PERIC0_BUS		245
+#define GOUT_CLKCMU_PERIC0_IP		246
+#define GOUT_CLKCMU_PERIC1_BUS		247
+#define GOUT_CLKCMU_PERIC1_IP		248
+#define GOUT_CLKCMU_PERIS_BUS		249
+
+#define TOP_NR_CLK			249
+
+/* CMU_BUSMC */
+#define CLK_MOUT_BUSMC_BUS_USER		1
+#define CLK_DOUT_BUSMC_BUSP		2
+#define CLK_GOUT_BUSMC_PDMA0_PCLK	3
+#define CLK_GOUT_BUSMC_SPDMA_PCLK	4
+
+#define BUSMC_NR_CLK			4
+
+/* CMU_CORE */
+#define CLK_MOUT_CORE_BUS_USER		1
+#define CLK_DOUT_CORE_BUSP		2
+#define CLK_GOUT_CORE_CCI_CLK		3
+#define CLK_GOUT_CORE_CCI_PCLK		4
+#define CLK_GOUT_CORE_CMU_CORE_PCLK	5
+
+#define CORE_NR_CLK			5
+
+/* CMU_FSYS2 */
+#define CLK_MOUT_FSYS2_BUS_USER		1
+#define CLK_MOUT_FSYS2_UFS_EMBD_USER	2
+#define CLK_MOUT_FSYS2_ETHERNET_USER	3
+#define CLK_GOUT_FSYS2_UFS_EMBD0_ACLK	4
+#define CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO	5
+#define CLK_GOUT_FSYS2_UFS_EMBD1_ACLK	6
+#define CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO	7
+
+#define FSYS2_NR_CLK			7
+
+/* CMU_PERIC0 */
+#define CLK_MOUT_PERIC0_BUS_USER	1
+#define CLK_MOUT_PERIC0_IP_USER		2
+#define CLK_MOUT_PERIC0_USI00_USI	3
+#define CLK_MOUT_PERIC0_USI01_USI	4
+#define CLK_MOUT_PERIC0_USI02_USI	5
+#define CLK_MOUT_PERIC0_USI03_USI	6
+#define CLK_MOUT_PERIC0_USI04_USI	7
+#define CLK_MOUT_PERIC0_USI05_USI	8
+#define CLK_MOUT_PERIC0_USI_I2C		9
+
+#define CLK_DOUT_PERIC0_USI00_USI	10
+#define CLK_DOUT_PERIC0_USI01_USI	11
+#define CLK_DOUT_PERIC0_USI02_USI	12
+#define CLK_DOUT_PERIC0_USI03_USI	13
+#define CLK_DOUT_PERIC0_USI04_USI	14
+#define CLK_DOUT_PERIC0_USI05_USI	15
+#define CLK_DOUT_PERIC0_USI_I2C		16
+
+#define CLK_GOUT_PERIC0_IPCLK_0		20
+#define CLK_GOUT_PERIC0_IPCLK_1		21
+#define CLK_GOUT_PERIC0_IPCLK_2		22
+#define CLK_GOUT_PERIC0_IPCLK_3		23
+#define CLK_GOUT_PERIC0_IPCLK_4		24
+#define CLK_GOUT_PERIC0_IPCLK_5		25
+#define CLK_GOUT_PERIC0_IPCLK_6		26
+#define CLK_GOUT_PERIC0_IPCLK_7		27
+#define CLK_GOUT_PERIC0_IPCLK_8		28
+#define CLK_GOUT_PERIC0_IPCLK_9		29
+#define CLK_GOUT_PERIC0_IPCLK_10	30
+#define CLK_GOUT_PERIC0_IPCLK_11	30
+#define CLK_GOUT_PERIC0_PCLK_0		31
+#define CLK_GOUT_PERIC0_PCLK_1		32
+#define CLK_GOUT_PERIC0_PCLK_2		33
+#define CLK_GOUT_PERIC0_PCLK_3		34
+#define CLK_GOUT_PERIC0_PCLK_4		35
+#define CLK_GOUT_PERIC0_PCLK_5		36
+#define CLK_GOUT_PERIC0_PCLK_6		37
+#define CLK_GOUT_PERIC0_PCLK_7		38
+#define CLK_GOUT_PERIC0_PCLK_8		39
+#define CLK_GOUT_PERIC0_PCLK_9		40
+#define CLK_GOUT_PERIC0_PCLK_10		41
+#define CLK_GOUT_PERIC0_PCLK_11		42
+
+#define PERIC0_NR_CLK			42
+
+/* CMU_PERIC1 */
+#define CLK_MOUT_PERIC1_BUS_USER	1
+#define CLK_MOUT_PERIC1_IP_USER		2
+#define CLK_MOUT_PERIC1_USI06_USI	3
+#define CLK_MOUT_PERIC1_USI07_USI	4
+#define CLK_MOUT_PERIC1_USI08_USI	5
+#define CLK_MOUT_PERIC1_USI09_USI	6
+#define CLK_MOUT_PERIC1_USI10_USI	7
+#define CLK_MOUT_PERIC1_USI11_USI	8
+#define CLK_MOUT_PERIC1_USI_I2C		9
+
+#define CLK_DOUT_PERIC1_USI06_USI	10
+#define CLK_DOUT_PERIC1_USI07_USI	11
+#define CLK_DOUT_PERIC1_USI08_USI	12
+#define CLK_DOUT_PERIC1_USI09_USI	13
+#define CLK_DOUT_PERIC1_USI10_USI	14
+#define CLK_DOUT_PERIC1_USI11_USI	15
+#define CLK_DOUT_PERIC1_USI_I2C		16
+
+#define CLK_GOUT_PERIC1_IPCLK_0		20
+#define CLK_GOUT_PERIC1_IPCLK_1		21
+#define CLK_GOUT_PERIC1_IPCLK_2		22
+#define CLK_GOUT_PERIC1_IPCLK_3		23
+#define CLK_GOUT_PERIC1_IPCLK_4		24
+#define CLK_GOUT_PERIC1_IPCLK_5		25
+#define CLK_GOUT_PERIC1_IPCLK_6		26
+#define CLK_GOUT_PERIC1_IPCLK_7		27
+#define CLK_GOUT_PERIC1_IPCLK_8		28
+#define CLK_GOUT_PERIC1_IPCLK_9		29
+#define CLK_GOUT_PERIC1_IPCLK_10	30
+#define CLK_GOUT_PERIC1_IPCLK_11	30
+#define CLK_GOUT_PERIC1_PCLK_0		31
+#define CLK_GOUT_PERIC1_PCLK_1		32
+#define CLK_GOUT_PERIC1_PCLK_2		33
+#define CLK_GOUT_PERIC1_PCLK_3		34
+#define CLK_GOUT_PERIC1_PCLK_4		35
+#define CLK_GOUT_PERIC1_PCLK_5		36
+#define CLK_GOUT_PERIC1_PCLK_6		37
+#define CLK_GOUT_PERIC1_PCLK_7		38
+#define CLK_GOUT_PERIC1_PCLK_8		39
+#define CLK_GOUT_PERIC1_PCLK_9		40
+#define CLK_GOUT_PERIC1_PCLK_10		41
+#define CLK_GOUT_PERIC1_PCLK_11		42
+
+#define PERIC1_NR_CLK			42
+
+/* CMU_PERIS */
+#define CLK_MOUT_PERIS_BUS_USER		1
+#define CLK_GOUT_SYSREG_PERIS_PCLK	2
+#define CLK_GOUT_WDT_CLUSTER0		3
+#define CLK_GOUT_WDT_CLUSTER1		4
+
+#define PERIS_NR_CLK			4
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H */
-- 
2.36.0

Re: [PATCH v3 01/12] dt-bindings: clock: add clock binding definitions for Exynos Auto v9

[Chanwoo Choi]

Hi Chanho,

On 22. 5. 4. 16:51, Chanho Park wrote:
> Add device tree clock binding definitions for below CMU blocks.
> 
> - CMU_TOP
> - CMU_BUSMC
> - CMU_CORE
> - CMU_FYS2
> - CMU_PERIC0 / C1
> - CMU_PERIS
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>   .../dt-bindings/clock/samsung,exynosautov9.h  | 299 ++++++++++++++++++
>   1 file changed, 299 insertions(+)
>   create mode 100644 include/dt-bindings/clock/samsung,exynosautov9.h
> 

(snip)

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>


-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

Re: [PATCH v3 01/12] dt-bindings: clock: add clock binding definitions for Exynos Auto v9

[Krzysztof Kozlowski]

On 04/05/2022 09:51, Chanho Park wrote:
> Add device tree clock binding definitions for below CMU blocks.
> 
> - CMU_TOP
> - CMU_BUSMC
> - CMU_CORE
> - CMU_FYS2
> - CMU_PERIC0 / C1
> - CMU_PERIS
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>  .../dt-bindings/clock/samsung,exynosautov9.h  | 299 ++++++++++++++++++

Hi Sylwester,

If I am to apply the DTS, which uses this header, I would need to take
it via my tree and send you a pull request with it.

Otherwise the DTS would need to be modified to have workaround-defines
for missing header.

Best regards,
Krzysztof

Re: [PATCH v3 01/12] dt-bindings: clock: add clock binding definitions for Exynos Auto v9

[Sylwester Nawrocki]

Hi,

On 04.05.2022 16:36, Krzysztof Kozlowski wrote:
> On 04/05/2022 09:51, Chanho Park wrote:
>> Add device tree clock binding definitions for below CMU blocks.
>>
>> - CMU_TOP
>> - CMU_BUSMC
>> - CMU_CORE
>> - CMU_FYS2
>> - CMU_PERIC0 / C1
>> - CMU_PERIS
>>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
>> ---
>>  .../dt-bindings/clock/samsung,exynosautov9.h  | 299 ++++++++++++++++++
> 
> Hi Sylwester,
> 
> If I am to apply the DTS, which uses this header, I would need to take
> it via my tree and send you a pull request with it.

Let's do it that way, please provide a pull request with the header.


Regards,
Sylwester

Re: (subset) [PATCH v3 01/12] dt-bindings: clock: add clock binding definitions for Exynos Auto v9

[Krzysztof Kozlowski]

On Wed, 4 May 2022 16:51:43 +0900, Chanho Park wrote:
> Add device tree clock binding definitions for below CMU blocks.
> 
> - CMU_TOP
> - CMU_BUSMC
> - CMU_CORE
> - CMU_FYS2
> - CMU_PERIC0 / C1
> - CMU_PERIS
> 
> [...]

Applied, thanks!

[01/12] dt-bindings: clock: add clock binding definitions for Exynos Auto v9
        commit: 680e1c8370a2ed7aff4f99ce3cebf79873d68f59

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[PATCH v3 02/12] dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings

[Chanho Park]

Add dt-schema for Exynos Auto v9 SoC clock controller.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 .../clock/samsung,exynosautov9-clock.yaml     | 219 ++++++++++++++++++
 1 file changed, 219 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
new file mode 100644
index 000000000000..eafc715d2d02
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Auto v9 SoC clock controller
+
+maintainers:
+  - Chanho Park <chanho61.park@samsung.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos Auto v9 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+  The external OSCCLK must be defined as fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynosautov9.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynosautov9-cmu-top
+      - samsung,exynosautov9-cmu-busmc
+      - samsung,exynosautov9-cmu-core
+      - samsung,exynosautov9-cmu-fsys2
+      - samsung,exynosautov9-cmu-peric0
+      - samsung,exynosautov9-cmu-peric1
+      - samsung,exynosautov9-cmu-peris
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-busmc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_BUSMC bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_busmc_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_core_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS2 bus clock (from CMU_TOP)
+            - description: UFS clock (from CMU_TOP)
+            - description: Ethernet clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys2_bus
+            - const: dout_fsys2_clkcmu_ufs_embd
+            - const: dout_fsys2_clkcmu_ethernet
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC0 bus clock (from CMU_TOP)
+            - description: PERIC0 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric0_bus
+            - const: dout_clkcmu_peric0_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC1 bus clock (from CMU_TOP)
+            - description: PERIC1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric1_bus
+            - const: dout_clkcmu_peric1_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peris
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIS bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peris_bus
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS2
+  - |
+    #include <dt-bindings/clock/samsung,exynosautov9.h>
+
+    cmu_fsys2: clock-controller@17c00000 {
+        compatible = "samsung,exynosautov9-cmu-fsys2";
+        reg = <0x17c00000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&xtcxo>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+        clock-names = "oscclk",
+                      "dout_clkcmu_fsys2_bus",
+                      "dout_fsys2_clkcmu_ufs_embd",
+                      "dout_fsys2_clkcmu_ethernet";
+    };
+
+...
-- 
2.36.0

Re: [PATCH v3 02/12] dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings

[Krzysztof Kozlowski]

On 04/05/2022 09:51, Chanho Park wrote:
> Add dt-schema for Exynos Auto v9 SoC clock controller.
> 
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v3 02/12] dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings

[Chanwoo Choi]

On 22. 5. 4. 16:51, Chanho Park wrote:
> Add dt-schema for Exynos Auto v9 SoC clock controller.
> 
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>   .../clock/samsung,exynosautov9-clock.yaml     | 219 ++++++++++++++++++
>   1 file changed, 219 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
> 


(snip)

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

Re: (subset) [PATCH v3 02/12] dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings

[Krzysztof Kozlowski]

On Wed, 4 May 2022 16:51:44 +0900, Chanho Park wrote:
> Add dt-schema for Exynos Auto v9 SoC clock controller.
> 
> 

Applied, thanks!

[02/12] dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings
        commit: e61492e47838f4d99a3ffcc591ba57d1d5d0896f

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[PATCH v3 03/12] clk: samsung: add top clock support for Exynos Auto v9 SoC

[Chanho Park]

This adds support for CMU_TOP which generates clocks for all the
function blocks such as CORE, FSYS0/1/2, PERIC0/1 and so on. For
CMU_TOP, PLL_SHARED0,1,2,3 and 4 will be the sources of this block
and they will generate bus clocks.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 drivers/clk/samsung/Makefile           |   1 +
 drivers/clk/samsung/clk-exynosautov9.c | 958 +++++++++++++++++++++++++
 2 files changed, 959 insertions(+)
 create mode 100644 drivers/clk/samsung/clk-exynosautov9.c

diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 17e5d1cb9da2..239d9eead77f 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos-arm64.o
 obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos7.o
 obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos7885.o
 obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos850.o
+obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynosautov9.o
 obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
 obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
 obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
diff --git a/drivers/clk/samsung/clk-exynosautov9.c b/drivers/clk/samsung/clk-exynosautov9.c
new file mode 100644
index 000000000000..96c6c9dbc995
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynosautov9.c
@@ -0,0 +1,958 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Samsung Electronics Co., Ltd.
+ * Author: Chanho Park <chanho61.park@samsung.com>
+ *
+ * Common Clock Framework support for ExynosAuto V9 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/samsung,exynosautov9.h>
+
+#include "clk.h"
+#include "clk-exynos-arm64.h"
+
+/* ---- CMU_TOP ------------------------------------------------------------ */
+
+/* Register Offset definitions for CMU_TOP (0x1b240000) */
+#define PLL_LOCKTIME_PLL_SHARED0		0x0000
+#define PLL_LOCKTIME_PLL_SHARED1		0x0004
+#define PLL_LOCKTIME_PLL_SHARED2		0x0008
+#define PLL_LOCKTIME_PLL_SHARED3		0x000c
+#define PLL_LOCKTIME_PLL_SHARED4		0x0010
+#define PLL_CON0_PLL_SHARED0			0x0100
+#define PLL_CON3_PLL_SHARED0			0x010c
+#define PLL_CON0_PLL_SHARED1			0x0140
+#define PLL_CON3_PLL_SHARED1			0x014c
+#define PLL_CON0_PLL_SHARED2			0x0180
+#define PLL_CON3_PLL_SHARED2			0x018c
+#define PLL_CON0_PLL_SHARED3			0x01c0
+#define PLL_CON3_PLL_SHARED3			0x01cc
+#define PLL_CON0_PLL_SHARED4			0x0200
+#define PLL_CON3_PLL_SHARED4			0x020c
+
+/* MUX */
+#define CLK_CON_MUX_MUX_CLKCMU_ACC_BUS		0x1000
+#define CLK_CON_MUX_MUX_CLKCMU_APM_BUS		0x1004
+#define CLK_CON_MUX_MUX_CLKCMU_AUD_BUS		0x1008
+#define CLK_CON_MUX_MUX_CLKCMU_AUD_CPU		0x100c
+#define CLK_CON_MUX_MUX_CLKCMU_BUSC_BUS		0x1010
+#define CLK_CON_MUX_MUX_CLKCMU_BUSMC_BUS	0x1018
+#define CLK_CON_MUX_MUX_CLKCMU_CMU_BOOST	0x101c
+#define CLK_CON_MUX_MUX_CLKCMU_CORE_BUS		0x1020
+#define CLK_CON_MUX_MUX_CLKCMU_CPUCL0_CLUSTER	0x1024
+#define CLK_CON_MUX_MUX_CLKCMU_CPUCL0_SWITCH	0x102c
+#define CLK_CON_MUX_MUX_CLKCMU_CPUCL1_CLUSTER	0x1030
+#define CLK_CON_MUX_MUX_CLKCMU_CPUCL1_SWITCH	0x1034
+#define CLK_CON_MUX_MUX_CLKCMU_DPTX_BUS		0x1040
+#define CLK_CON_MUX_MUX_CLKCMU_DPTX_DPGTC	0x1044
+#define CLK_CON_MUX_MUX_CLKCMU_DPUM_BUS		0x1048
+#define CLK_CON_MUX_MUX_CLKCMU_DPUS0_BUS	0x104c
+#define CLK_CON_MUX_MUX_CLKCMU_DPUS1_BUS	0x1050
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS0_BUS	0x1054
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS0_PCIE	0x1058
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS1_BUS	0x105c
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS1_MMC_CARD	0x1060
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS1_USBDRD	0x1064
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS2_BUS	0x1068
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS2_ETHERNET	0x106c
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS2_UFS_EMBD	0x1070
+#define CLK_CON_MUX_MUX_CLKCMU_G2D_G2D		0x1074
+#define CLK_CON_MUX_MUX_CLKCMU_G2D_MSCL		0x1078
+#define CLK_CON_MUX_MUX_CLKCMU_G3D00_SWITCH	0x107c
+#define CLK_CON_MUX_MUX_CLKCMU_G3D01_SWITCH	0x1080
+#define CLK_CON_MUX_MUX_CLKCMU_G3D1_SWITCH	0x1084
+#define CLK_CON_MUX_MUX_CLKCMU_ISPB_BUS		0x108c
+#define CLK_CON_MUX_MUX_CLKCMU_MFC_MFC		0x1090
+#define CLK_CON_MUX_MUX_CLKCMU_MFC_WFD		0x1094
+#define CLK_CON_MUX_MUX_CLKCMU_MIF_SWITCH	0x109c
+#define CLK_CON_MUX_MUX_CLKCMU_MIF_BUSP		0x1098
+#define CLK_CON_MUX_MUX_CLKCMU_MIF_SWITCH	0x109c
+#define CLK_CON_MUX_MUX_CLKCMU_NPU_BUS		0x10a0
+#define CLK_CON_MUX_MUX_CLKCMU_PERIC0_BUS	0x10a4
+#define CLK_CON_MUX_MUX_CLKCMU_PERIC0_IP	0x10a8
+#define CLK_CON_MUX_MUX_CLKCMU_PERIC1_BUS	0x10ac
+#define CLK_CON_MUX_MUX_CLKCMU_PERIC1_IP	0x10b0
+#define CLK_CON_MUX_MUX_CLKCMU_PERIS_BUS	0x10b4
+#define CLK_CON_MUX_MUX_CMU_CMUREF		0x10c0
+
+/* DIV */
+#define CLK_CON_DIV_CLKCMU_ACC_BUS		0x1800
+#define CLK_CON_DIV_CLKCMU_APM_BUS		0x1804
+#define CLK_CON_DIV_CLKCMU_AUD_BUS		0x1808
+#define CLK_CON_DIV_CLKCMU_AUD_CPU		0x180c
+#define CLK_CON_DIV_CLKCMU_BUSC_BUS		0x1810
+#define CLK_CON_DIV_CLKCMU_BUSMC_BUS		0x1818
+#define CLK_CON_DIV_CLKCMU_CORE_BUS		0x181c
+#define CLK_CON_DIV_CLKCMU_CPUCL0_CLUSTER	0x1820
+#define CLK_CON_DIV_CLKCMU_CPUCL0_SWITCH	0x1828
+#define CLK_CON_DIV_CLKCMU_CPUCL1_CLUSTER	0x182c
+#define CLK_CON_DIV_CLKCMU_CPUCL1_SWITCH	0x1830
+#define CLK_CON_DIV_CLKCMU_DPTX_BUS		0x183c
+#define CLK_CON_DIV_CLKCMU_DPTX_DPGTC		0x1840
+#define CLK_CON_DIV_CLKCMU_DPUM_BUS		0x1844
+#define CLK_CON_DIV_CLKCMU_DPUS0_BUS		0x1848
+#define CLK_CON_DIV_CLKCMU_DPUS1_BUS		0x184c
+#define CLK_CON_DIV_CLKCMU_FSYS0_BUS		0x1850
+#define CLK_CON_DIV_CLKCMU_FSYS0_PCIE		0x1854
+#define CLK_CON_DIV_CLKCMU_FSYS1_BUS		0x1858
+#define CLK_CON_DIV_CLKCMU_FSYS1_USBDRD		0x185c
+#define CLK_CON_DIV_CLKCMU_FSYS2_BUS		0x1860
+#define CLK_CON_DIV_CLKCMU_FSYS2_ETHERNET	0x1864
+#define CLK_CON_DIV_CLKCMU_FSYS2_UFS_EMBD	0x1868
+#define CLK_CON_DIV_CLKCMU_G2D_G2D		0x186c
+#define CLK_CON_DIV_CLKCMU_G2D_MSCL		0x1870
+#define CLK_CON_DIV_CLKCMU_G3D00_SWITCH		0x1874
+#define CLK_CON_DIV_CLKCMU_G3D01_SWITCH		0x1878
+#define CLK_CON_DIV_CLKCMU_G3D1_SWITCH		0x187c
+#define CLK_CON_DIV_CLKCMU_ISPB_BUS		0x1884
+#define CLK_CON_DIV_CLKCMU_MFC_MFC		0x1888
+#define CLK_CON_DIV_CLKCMU_MFC_WFD		0x188c
+#define CLK_CON_DIV_CLKCMU_MIF_BUSP		0x1890
+#define CLK_CON_DIV_CLKCMU_NPU_BUS		0x1894
+#define CLK_CON_DIV_CLKCMU_PERIC0_BUS		0x1898
+#define CLK_CON_DIV_CLKCMU_PERIC0_IP		0x189c
+#define CLK_CON_DIV_CLKCMU_PERIC1_BUS		0x18a0
+#define CLK_CON_DIV_CLKCMU_PERIC1_IP		0x18a4
+#define CLK_CON_DIV_CLKCMU_PERIS_BUS		0x18a8
+#define CLK_CON_DIV_DIV_CLKCMU_CMU_BOOST	0x18b4
+
+#define CLK_CON_DIV_PLL_SHARED0_DIV2		0x18b8
+#define CLK_CON_DIV_PLL_SHARED0_DIV3		0x18bc
+#define CLK_CON_DIV_PLL_SHARED1_DIV2		0x18c0
+#define CLK_CON_DIV_PLL_SHARED1_DIV3		0x18c4
+#define CLK_CON_DIV_PLL_SHARED1_DIV4		0x18c8
+#define CLK_CON_DIV_PLL_SHARED2_DIV2		0x18cc
+#define CLK_CON_DIV_PLL_SHARED2_DIV3		0x18d0
+#define CLK_CON_DIV_PLL_SHARED2_DIV4		0x18d4
+#define CLK_CON_DIV_PLL_SHARED4_DIV2		0x18d4
+#define CLK_CON_DIV_PLL_SHARED4_DIV4		0x18d8
+
+/* GATE */
+#define CLK_CON_GAT_CLKCMU_CMU_BUSC_BOOST	0x2000
+#define CLK_CON_GAT_CLKCMU_CMU_BUSMC_BOOST	0x2004
+#define CLK_CON_GAT_CLKCMU_CMU_CORE_BOOST	0x2008
+#define CLK_CON_GAT_CLKCMU_CMU_CPUCL0_BOOST	0x2010
+#define CLK_CON_GAT_CLKCMU_CMU_CPUCL1_BOOST	0x2018
+#define CLK_CON_GAT_CLKCMU_CMU_MIF_BOOST	0x2020
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS1_MMC_CARD	0x2024
+#define CLK_CON_GAT_GATE_CLKCMU_MIF_SWITCH	0x2028
+#define CLK_CON_GAT_GATE_CLKCMU_ACC_BUS		0x202c
+#define CLK_CON_GAT_GATE_CLKCMU_APM_BUS		0x2030
+#define CLK_CON_GAT_GATE_CLKCMU_AUD_BUS		0x2034
+#define CLK_CON_GAT_GATE_CLKCMU_AUD_CPU		0x2038
+#define CLK_CON_GAT_GATE_CLKCMU_BUSC_BUS	0x203c
+#define CLK_CON_GAT_GATE_CLKCMU_BUSMC_BUS	0x2044
+#define CLK_CON_GAT_GATE_CLKCMU_CMU_BOOST	0x2048
+#define CLK_CON_GAT_GATE_CLKCMU_CORE_BUS	0x204c
+#define CLK_CON_GAT_GATE_CLKCMU_CPUCL0_CLUSTER	0x2050
+#define CLK_CON_GAT_GATE_CLKCMU_CPUCL0_SWITCH	0x2058
+#define CLK_CON_GAT_GATE_CLKCMU_CPUCL1_CLUSTER	0x205c
+#define CLK_CON_GAT_GATE_CLKCMU_CPUCL1_SWITCH	0x2060
+#define CLK_CON_GAT_GATE_CLKCMU_DPTX_BUS	0x206c
+#define CLK_CON_GAT_GATE_CLKCMU_DPTX_DPGTC	0x2070
+#define CLK_CON_GAT_GATE_CLKCMU_DPUM_BUS	0x2060
+#define CLK_CON_GAT_GATE_CLKCMU_DPUS0_BUS	0x2064
+#define CLK_CON_GAT_GATE_CLKCMU_DPUS1_BUS	0x207c
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS0_BUS	0x2080
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS0_PCIE	0x2084
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS1_BUS	0x2088
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS1_USBDRD	0x208c
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS2_BUS	0x2090
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS2_ETHERNET	0x2094
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS2_UFS_EMBD	0x2098
+#define CLK_CON_GAT_GATE_CLKCMU_G2D_G2D		0x209c
+#define CLK_CON_GAT_GATE_CLKCMU_G2D_MSCL	0x20a0
+#define CLK_CON_GAT_GATE_CLKCMU_G3D00_SWITCH	0x20a4
+#define CLK_CON_GAT_GATE_CLKCMU_G3D01_SWITCH	0x20a8
+#define CLK_CON_GAT_GATE_CLKCMU_G3D1_SWITCH	0x20ac
+#define CLK_CON_GAT_GATE_CLKCMU_ISPB_BUS	0x20b4
+#define CLK_CON_GAT_GATE_CLKCMU_MFC_MFC		0x20b8
+#define CLK_CON_GAT_GATE_CLKCMU_MFC_WFD		0x20bc
+#define CLK_CON_GAT_GATE_CLKCMU_MIF_BUSP	0x20c0
+#define CLK_CON_GAT_GATE_CLKCMU_NPU_BUS		0x20c4
+#define CLK_CON_GAT_GATE_CLKCMU_PERIC0_BUS	0x20c8
+#define CLK_CON_GAT_GATE_CLKCMU_PERIC0_IP	0x20cc
+#define CLK_CON_GAT_GATE_CLKCMU_PERIC1_BUS	0x20d0
+#define CLK_CON_GAT_GATE_CLKCMU_PERIC1_IP	0x20d4
+#define CLK_CON_GAT_GATE_CLKCMU_PERIS_BUS	0x20d8
+
+static const unsigned long top_clk_regs[] __initconst = {
+	PLL_LOCKTIME_PLL_SHARED0,
+	PLL_LOCKTIME_PLL_SHARED1,
+	PLL_LOCKTIME_PLL_SHARED2,
+	PLL_LOCKTIME_PLL_SHARED3,
+	PLL_LOCKTIME_PLL_SHARED4,
+	PLL_CON0_PLL_SHARED0,
+	PLL_CON3_PLL_SHARED0,
+	PLL_CON0_PLL_SHARED1,
+	PLL_CON3_PLL_SHARED1,
+	PLL_CON0_PLL_SHARED2,
+	PLL_CON3_PLL_SHARED2,
+	PLL_CON0_PLL_SHARED3,
+	PLL_CON3_PLL_SHARED3,
+	PLL_CON0_PLL_SHARED4,
+	PLL_CON3_PLL_SHARED4,
+	CLK_CON_MUX_MUX_CLKCMU_ACC_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_APM_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_AUD_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_AUD_CPU,
+	CLK_CON_MUX_MUX_CLKCMU_BUSC_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_CMU_BOOST,
+	CLK_CON_MUX_MUX_CLKCMU_CORE_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_CPUCL0_CLUSTER,
+	CLK_CON_MUX_MUX_CLKCMU_CPUCL0_SWITCH,
+	CLK_CON_MUX_MUX_CLKCMU_CPUCL1_CLUSTER,
+	CLK_CON_MUX_MUX_CLKCMU_CPUCL1_SWITCH,
+	CLK_CON_MUX_MUX_CLKCMU_DPTX_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_DPTX_DPGTC,
+	CLK_CON_MUX_MUX_CLKCMU_DPUM_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_DPUS0_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_DPUS1_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS0_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS0_PCIE,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS1_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS1_MMC_CARD,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS1_USBDRD,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS2_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS2_ETHERNET,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS2_UFS_EMBD,
+	CLK_CON_MUX_MUX_CLKCMU_G2D_G2D,
+	CLK_CON_MUX_MUX_CLKCMU_G2D_MSCL,
+	CLK_CON_MUX_MUX_CLKCMU_G3D00_SWITCH,
+	CLK_CON_MUX_MUX_CLKCMU_G3D01_SWITCH,
+	CLK_CON_MUX_MUX_CLKCMU_G3D1_SWITCH,
+	CLK_CON_MUX_MUX_CLKCMU_ISPB_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_MFC_MFC,
+	CLK_CON_MUX_MUX_CLKCMU_MFC_WFD,
+	CLK_CON_MUX_MUX_CLKCMU_MIF_SWITCH,
+	CLK_CON_MUX_MUX_CLKCMU_MIF_BUSP,
+	CLK_CON_MUX_MUX_CLKCMU_MIF_SWITCH,
+	CLK_CON_MUX_MUX_CLKCMU_NPU_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_PERIC0_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_PERIC0_IP,
+	CLK_CON_MUX_MUX_CLKCMU_PERIC1_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_PERIC1_IP,
+	CLK_CON_MUX_MUX_CLKCMU_PERIS_BUS,
+	CLK_CON_MUX_MUX_CMU_CMUREF,
+	CLK_CON_DIV_CLKCMU_ACC_BUS,
+	CLK_CON_DIV_CLKCMU_APM_BUS,
+	CLK_CON_DIV_CLKCMU_AUD_BUS,
+	CLK_CON_DIV_CLKCMU_AUD_CPU,
+	CLK_CON_DIV_CLKCMU_BUSC_BUS,
+	CLK_CON_DIV_CLKCMU_BUSMC_BUS,
+	CLK_CON_DIV_CLKCMU_CORE_BUS,
+	CLK_CON_DIV_CLKCMU_CPUCL0_CLUSTER,
+	CLK_CON_DIV_CLKCMU_CPUCL0_SWITCH,
+	CLK_CON_DIV_CLKCMU_CPUCL1_CLUSTER,
+	CLK_CON_DIV_CLKCMU_CPUCL1_SWITCH,
+	CLK_CON_DIV_CLKCMU_DPTX_BUS,
+	CLK_CON_DIV_CLKCMU_DPTX_DPGTC,
+	CLK_CON_DIV_CLKCMU_DPUM_BUS,
+	CLK_CON_DIV_CLKCMU_DPUS0_BUS,
+	CLK_CON_DIV_CLKCMU_DPUS1_BUS,
+	CLK_CON_DIV_CLKCMU_FSYS0_BUS,
+	CLK_CON_DIV_CLKCMU_FSYS0_PCIE,
+	CLK_CON_DIV_CLKCMU_FSYS1_BUS,
+	CLK_CON_DIV_CLKCMU_FSYS1_USBDRD,
+	CLK_CON_DIV_CLKCMU_FSYS2_BUS,
+	CLK_CON_DIV_CLKCMU_FSYS2_ETHERNET,
+	CLK_CON_DIV_CLKCMU_FSYS2_UFS_EMBD,
+	CLK_CON_DIV_CLKCMU_G2D_G2D,
+	CLK_CON_DIV_CLKCMU_G2D_MSCL,
+	CLK_CON_DIV_CLKCMU_G3D00_SWITCH,
+	CLK_CON_DIV_CLKCMU_G3D01_SWITCH,
+	CLK_CON_DIV_CLKCMU_G3D1_SWITCH,
+	CLK_CON_DIV_CLKCMU_ISPB_BUS,
+	CLK_CON_DIV_CLKCMU_MFC_MFC,
+	CLK_CON_DIV_CLKCMU_MFC_WFD,
+	CLK_CON_DIV_CLKCMU_MIF_BUSP,
+	CLK_CON_DIV_CLKCMU_NPU_BUS,
+	CLK_CON_DIV_CLKCMU_PERIC0_BUS,
+	CLK_CON_DIV_CLKCMU_PERIC0_IP,
+	CLK_CON_DIV_CLKCMU_PERIC1_BUS,
+	CLK_CON_DIV_CLKCMU_PERIC1_IP,
+	CLK_CON_DIV_CLKCMU_PERIS_BUS,
+	CLK_CON_DIV_DIV_CLKCMU_CMU_BOOST,
+	CLK_CON_DIV_PLL_SHARED0_DIV2,
+	CLK_CON_DIV_PLL_SHARED0_DIV3,
+	CLK_CON_DIV_PLL_SHARED1_DIV2,
+	CLK_CON_DIV_PLL_SHARED1_DIV3,
+	CLK_CON_DIV_PLL_SHARED1_DIV4,
+	CLK_CON_DIV_PLL_SHARED2_DIV2,
+	CLK_CON_DIV_PLL_SHARED2_DIV3,
+	CLK_CON_DIV_PLL_SHARED2_DIV4,
+	CLK_CON_DIV_PLL_SHARED4_DIV2,
+	CLK_CON_DIV_PLL_SHARED4_DIV4,
+	CLK_CON_GAT_CLKCMU_CMU_BUSC_BOOST,
+	CLK_CON_GAT_CLKCMU_CMU_BUSMC_BOOST,
+	CLK_CON_GAT_CLKCMU_CMU_CORE_BOOST,
+	CLK_CON_GAT_CLKCMU_CMU_CPUCL0_BOOST,
+	CLK_CON_GAT_CLKCMU_CMU_CPUCL1_BOOST,
+	CLK_CON_GAT_CLKCMU_CMU_MIF_BOOST,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS1_MMC_CARD,
+	CLK_CON_GAT_GATE_CLKCMU_MIF_SWITCH,
+	CLK_CON_GAT_GATE_CLKCMU_ACC_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_APM_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_AUD_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_AUD_CPU,
+	CLK_CON_GAT_GATE_CLKCMU_BUSC_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_BUSMC_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_CMU_BOOST,
+	CLK_CON_GAT_GATE_CLKCMU_CORE_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_CPUCL0_CLUSTER,
+	CLK_CON_GAT_GATE_CLKCMU_CPUCL0_SWITCH,
+	CLK_CON_GAT_GATE_CLKCMU_CPUCL1_CLUSTER,
+	CLK_CON_GAT_GATE_CLKCMU_CPUCL1_SWITCH,
+	CLK_CON_GAT_GATE_CLKCMU_DPTX_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_DPTX_DPGTC,
+	CLK_CON_GAT_GATE_CLKCMU_DPUM_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_DPUS0_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_DPUS1_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS0_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS0_PCIE,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS1_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS1_USBDRD,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS2_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS2_ETHERNET,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS2_UFS_EMBD,
+	CLK_CON_GAT_GATE_CLKCMU_G2D_G2D,
+	CLK_CON_GAT_GATE_CLKCMU_G2D_MSCL,
+	CLK_CON_GAT_GATE_CLKCMU_G3D00_SWITCH,
+	CLK_CON_GAT_GATE_CLKCMU_G3D01_SWITCH,
+	CLK_CON_GAT_GATE_CLKCMU_G3D1_SWITCH,
+	CLK_CON_GAT_GATE_CLKCMU_ISPB_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_MFC_MFC,
+	CLK_CON_GAT_GATE_CLKCMU_MFC_WFD,
+	CLK_CON_GAT_GATE_CLKCMU_MIF_BUSP,
+	CLK_CON_GAT_GATE_CLKCMU_NPU_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_PERIC0_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_PERIC0_IP,
+	CLK_CON_GAT_GATE_CLKCMU_PERIC1_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_PERIC1_IP,
+	CLK_CON_GAT_GATE_CLKCMU_PERIS_BUS,
+};
+
+static const struct samsung_pll_clock top_pll_clks[] __initconst = {
+	/* CMU_TOP_PURECLKCOMP */
+	PLL(pll_0822x, FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
+	    PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0, NULL),
+	PLL(pll_0822x, FOUT_SHARED0_PLL, "fout_shared1_pll", "oscclk",
+	    PLL_LOCKTIME_PLL_SHARED1, PLL_CON3_PLL_SHARED1, NULL),
+	PLL(pll_0822x, FOUT_SHARED0_PLL, "fout_shared2_pll", "oscclk",
+	    PLL_LOCKTIME_PLL_SHARED2, PLL_CON3_PLL_SHARED2, NULL),
+	PLL(pll_0822x, FOUT_SHARED0_PLL, "fout_shared3_pll", "oscclk",
+	    PLL_LOCKTIME_PLL_SHARED3, PLL_CON3_PLL_SHARED3, NULL),
+	PLL(pll_0822x, FOUT_SHARED0_PLL, "fout_shared4_pll", "oscclk",
+	    PLL_LOCKTIME_PLL_SHARED4, PLL_CON3_PLL_SHARED4, NULL),
+};
+
+/* List of parent clocks for Muxes in CMU_TOP */
+PNAME(mout_shared0_pll_p) = { "oscclk", "fout_shared0_pll" };
+PNAME(mout_shared1_pll_p) = { "oscclk", "fout_shared1_pll" };
+PNAME(mout_shared2_pll_p) = { "oscclk", "fout_shared2_pll" };
+PNAME(mout_shared3_pll_p) = { "oscclk", "fout_shared3_pll" };
+PNAME(mout_shared4_pll_p) = { "oscclk", "fout_shared4_pll" };
+
+PNAME(mout_clkcmu_cmu_boost_p) = { "dout_shared2_div3", "dout_shared1_div4",
+				   "dout_shared2_div4", "dout_shared4_div4" };
+PNAME(mout_clkcmu_cmu_cmuref_p) = { "oscclk", "dout_cmu_boost" };
+PNAME(mout_clkcmu_acc_bus_p) = { "dout_shared1_div3", "dout_shared2_div3",
+				 "dout_shared1_div4", "dout_shared2_div4" };
+PNAME(mout_clkcmu_apm_bus_p) = { "dout_shared2_div3", "dout_shared1_div4",
+				 "dout_shared2_div4", "dout_shared4_div4" };
+PNAME(mout_clkcmu_aud_cpu_p) = { "dout_shared0_div2", "dout_shared1_div2",
+				 "dout_shared2_div2", "dout_shared0_div3",
+				 "dout_shared4_div2", "dout_shared1_div3",
+				 "fout_shared3_pll" };
+PNAME(mout_clkcmu_aud_bus_p) = { "dout_shared4_div2", "dout_shared1_div3",
+				  "dout_shared2_div3", "dout_shared1_div4" };
+PNAME(mout_clkcmu_busc_bus_p) = { "dout_shared2_div3", "dout_shared1_div4",
+				  "dout_shared2_div4", "dout_shared4_div4" };
+PNAME(mout_clkcmu_core_bus_p) = { "dout_shared0_div2", "dout_shared1_div2",
+				  "dout_shared2_div2", "dout_shared0_div3",
+				  "dout_shared4_div2", "dout_shared1_div3",
+				  "dout_shared2_div3", "fout_shared3_pll" };
+PNAME(mout_clkcmu_cpucl0_switch_p) = {
+	"dout_shared0_div2", "dout_shared1_div2",
+	"dout_shared2_div2", "dout_shared4_div2" };
+PNAME(mout_clkcmu_cpucl0_cluster_p) = {
+	"fout_shared2_pll", "fout_shared4_pll",
+	"dout_shared0_div2", "dout_shared1_div2",
+	"dout_shared2_div2", "dout_shared4_div2",
+	"dout_shared2_div3", "fout_shared3_pll" };
+PNAME(mout_clkcmu_dptx_bus_p) = { "dout_shared4_div2", "dout_shared2_div3",
+				  "dout_shared1_div4", "dout_shared2_div4" };
+PNAME(mout_clkcmu_dptx_dpgtc_p) = { "oscclk", "dout_shared2_div3",
+				    "dout_shared2_div4", "dout_shared4_div4" };
+PNAME(mout_clkcmu_dpum_bus_p) = { "dout_shared1_div3", "dout_shared2_div3",
+				  "dout_shared1_div4", "dout_shared2_div4",
+				  "dout_shared4_div4", "fout_shared3_pll" };
+PNAME(mout_clkcmu_fsys0_bus_p)	= {
+	"dout_shared4_div2", "dout_shared2_div3",
+	"dout_shared1_div4", "dout_shared2_div4" };
+PNAME(mout_clkcmu_fsys0_pcie_p) = { "oscclk", "dout_shared2_div4" };
+PNAME(mout_clkcmu_fsys1_bus_p)	= { "dout_shared2_div3", "dout_shared1_div4",
+				    "dout_shared2_div4", "dout_shared4_div4" };
+PNAME(mout_clkcmu_fsys1_usbdrd_p) = {
+	"oscclk", "dout_shared2_div3",
+	"dout_shared2_div4", "dout_shared4_div4" };
+PNAME(mout_clkcmu_fsys1_mmc_card_p) = {
+	"oscclk", "dout_shared2_div2",
+	"dout_shared4_div2", "dout_shared2_div3" };
+PNAME(mout_clkcmu_fsys2_ethernet_p) = {
+	"oscclk", "dout_shared2_div2",
+	"dout_shared0_div3", "dout_shared2_div3",
+	"dout_shared1_div4", "fout_shared3_pll" };
+PNAME(mout_clkcmu_g2d_g2d_p) = { "dout_shared2_div2", "dout_shared0_div3",
+				 "dout_shared4_div2", "dout_shared1_div3",
+				 "dout_shared2_div3", "dout_shared1_div4",
+				 "dout_shared2_div4", "dout_shared4_div4" };
+PNAME(mout_clkcmu_g3d0_switch_p) = { "dout_shared0_div2", "dout_shared1_div2",
+				     "dout_shared2_div2", "dout_shared4_div2" };
+PNAME(mout_clkcmu_g3d1_switch_p) = { "dout_shared2_div2", "dout_shared4_div2",
+				     "dout_shared2_div3", "dout_shared1_div4" };
+PNAME(mout_clkcmu_mif_switch_p) = { "fout_shared0_pll", "fout_shared1_pll",
+				    "fout_shared2_pll", "fout_shared4_pll",
+				    "dout_shared0_div2", "dout_shared1_div2",
+				    "dout_shared2_div2", "fout_shared3_pll" };
+PNAME(mout_clkcmu_npu_bus_p) = { "dout_shared1_div2", "dout_shared2_div2",
+				 "dout_shared0_div3", "dout_shared4_div2",
+				 "dout_shared1_div3", "dout_shared2_div3",
+				 "dout_shared1_div4", "fout_shared3_pll" };
+PNAME(mout_clkcmu_peric0_bus_p) = { "dout_shared2_div3", "dout_shared2_div4" };
+
+static const struct samsung_mux_clock top_mux_clks[] __initconst = {
+	/* CMU_TOP_PURECLKCOMP */
+	MUX(MOUT_SHARED0_PLL, "mout_shared0_pll", mout_shared0_pll_p,
+	    PLL_CON0_PLL_SHARED0, 4, 1),
+	MUX(MOUT_SHARED1_PLL, "mout_shared1_pll", mout_shared1_pll_p,
+	    PLL_CON0_PLL_SHARED1, 4, 1),
+	MUX(MOUT_SHARED2_PLL, "mout_shared2_pll", mout_shared2_pll_p,
+	    PLL_CON0_PLL_SHARED2, 4, 1),
+	MUX(MOUT_SHARED3_PLL, "mout_shared3_pll", mout_shared3_pll_p,
+	    PLL_CON0_PLL_SHARED3, 4, 1),
+	MUX(MOUT_SHARED4_PLL, "mout_shared4_pll", mout_shared4_pll_p,
+	    PLL_CON0_PLL_SHARED4, 4, 1),
+
+	/* BOOST */
+	MUX(MOUT_CLKCMU_CMU_BOOST, "mout_clkcmu_cmu_boost",
+	    mout_clkcmu_cmu_boost_p, CLK_CON_MUX_MUX_CLKCMU_CMU_BOOST, 0, 2),
+	MUX(MOUT_CLKCMU_CMU_CMUREF, "mout_clkcmu_cmu_cmuref",
+	    mout_clkcmu_cmu_cmuref_p, CLK_CON_MUX_MUX_CMU_CMUREF, 0, 1),
+
+	/* ACC */
+	MUX(MOUT_CLKCMU_ACC_BUS, "mout_clkcmu_acc_bus", mout_clkcmu_acc_bus_p,
+	    CLK_CON_MUX_MUX_CLKCMU_ACC_BUS, 0, 2),
+
+	/* APM */
+	MUX(MOUT_CLKCMU_APM_BUS, "mout_clkcmu_apm_bus", mout_clkcmu_apm_bus_p,
+	    CLK_CON_MUX_MUX_CLKCMU_APM_BUS, 0, 2),
+
+	/* AUD */
+	MUX(MOUT_CLKCMU_AUD_CPU, "mout_clkcmu_aud_cpu", mout_clkcmu_aud_cpu_p,
+	    CLK_CON_MUX_MUX_CLKCMU_AUD_CPU, 0, 3),
+	MUX(MOUT_CLKCMU_AUD_BUS, "mout_clkcmu_aud_bus", mout_clkcmu_aud_bus_p,
+	    CLK_CON_MUX_MUX_CLKCMU_AUD_BUS, 0, 2),
+
+	/* BUSC */
+	MUX(MOUT_CLKCMU_BUSC_BUS, "mout_clkcmu_busc_bus",
+	    mout_clkcmu_busc_bus_p, CLK_CON_MUX_MUX_CLKCMU_BUSC_BUS, 0, 2),
+
+	/* BUSMC */
+	MUX(MOUT_CLKCMU_BUSMC_BUS, "mout_clkcmu_busmc_bus",
+	    mout_clkcmu_busc_bus_p, CLK_CON_MUX_MUX_CLKCMU_BUSMC_BUS, 0, 2),
+
+	/* CORE */
+	MUX(MOUT_CLKCMU_CORE_BUS, "mout_clkcmu_core_bus",
+	    mout_clkcmu_core_bus_p, CLK_CON_MUX_MUX_CLKCMU_CORE_BUS, 0, 3),
+
+	/* CPUCL0 */
+	MUX(MOUT_CLKCMU_CPUCL0_SWITCH, "mout_clkcmu_cpucl0_switch",
+	    mout_clkcmu_cpucl0_switch_p, CLK_CON_MUX_MUX_CLKCMU_CPUCL0_SWITCH,
+	    0, 2),
+	MUX(MOUT_CLKCMU_CPUCL0_CLUSTER, "mout_clkcmu_cpucl0_cluster",
+	    mout_clkcmu_cpucl0_cluster_p,
+	    CLK_CON_MUX_MUX_CLKCMU_CPUCL0_CLUSTER, 0, 3),
+
+	/* CPUCL1 */
+	MUX(MOUT_CLKCMU_CPUCL1_SWITCH, "mout_clkcmu_cpucl1_switch",
+	    mout_clkcmu_cpucl0_switch_p, CLK_CON_MUX_MUX_CLKCMU_CPUCL1_SWITCH,
+	    0, 2),
+	MUX(MOUT_CLKCMU_CPUCL1_CLUSTER, "mout_clkcmu_cpucl1_cluster",
+	    mout_clkcmu_cpucl0_cluster_p,
+	    CLK_CON_MUX_MUX_CLKCMU_CPUCL1_CLUSTER, 0, 3),
+
+	/* DPTX */
+	MUX(MOUT_CLKCMU_DPTX_BUS, "mout_clkcmu_dptx_bus",
+	    mout_clkcmu_dptx_bus_p, CLK_CON_MUX_MUX_CLKCMU_DPTX_BUS, 0, 2),
+	MUX(MOUT_CLKCMU_DPTX_DPGTC, "mout_clkcmu_dptx_dpgtc",
+	    mout_clkcmu_dptx_dpgtc_p, CLK_CON_MUX_MUX_CLKCMU_DPTX_DPGTC, 0, 2),
+
+	/* DPUM */
+	MUX(MOUT_CLKCMU_DPUM_BUS, "mout_clkcmu_dpum_bus",
+	    mout_clkcmu_dpum_bus_p, CLK_CON_MUX_MUX_CLKCMU_DPUM_BUS, 0, 3),
+
+	/* DPUS */
+	MUX(MOUT_CLKCMU_DPUS0_BUS, "mout_clkcmu_dpus0_bus",
+	    mout_clkcmu_dpum_bus_p, CLK_CON_MUX_MUX_CLKCMU_DPUS0_BUS, 0, 3),
+	MUX(MOUT_CLKCMU_DPUS1_BUS, "mout_clkcmu_dpus1_bus",
+	    mout_clkcmu_dpum_bus_p, CLK_CON_MUX_MUX_CLKCMU_DPUS1_BUS, 0, 3),
+
+	/* FSYS0 */
+	MUX(MOUT_CLKCMU_FSYS0_BUS, "mout_clkcmu_fsys0_bus",
+	    mout_clkcmu_fsys0_bus_p, CLK_CON_MUX_MUX_CLKCMU_FSYS0_BUS, 0, 2),
+	MUX(MOUT_CLKCMU_FSYS0_PCIE, "mout_clkcmu_fsys0_pcie",
+	    mout_clkcmu_fsys0_pcie_p, CLK_CON_MUX_MUX_CLKCMU_FSYS0_PCIE, 0, 1),
+
+	/* FSYS1 */
+	MUX(MOUT_CLKCMU_FSYS1_BUS, "mout_clkcmu_fsys1_bus",
+	    mout_clkcmu_fsys1_bus_p, CLK_CON_MUX_MUX_CLKCMU_FSYS1_BUS, 0, 2),
+	MUX(MOUT_CLKCMU_FSYS1_USBDRD, "mout_clkcmu_fsys1_usbdrd",
+	    mout_clkcmu_fsys1_usbdrd_p, CLK_CON_MUX_MUX_CLKCMU_FSYS1_USBDRD,
+	    0, 2),
+	MUX(MOUT_CLKCMU_FSYS1_MMC_CARD, "mout_clkcmu_fsys1_mmc_card",
+	    mout_clkcmu_fsys1_mmc_card_p,
+	    CLK_CON_MUX_MUX_CLKCMU_FSYS1_MMC_CARD, 0, 2),
+
+	/* FSYS2 */
+	MUX(MOUT_CLKCMU_FSYS2_BUS, "mout_clkcmu_fsys2_bus",
+	    mout_clkcmu_fsys0_bus_p, CLK_CON_MUX_MUX_CLKCMU_FSYS2_BUS, 0, 2),
+	MUX(MOUT_CLKCMU_FSYS2_UFS_EMBD, "mout_clkcmu_fsys2_ufs_embd",
+	    mout_clkcmu_fsys1_usbdrd_p, CLK_CON_MUX_MUX_CLKCMU_FSYS2_UFS_EMBD,
+	    0, 2),
+	MUX(MOUT_CLKCMU_FSYS2_ETHERNET, "mout_clkcmu_fsys2_ethernet",
+	    mout_clkcmu_fsys2_ethernet_p,
+	    CLK_CON_MUX_MUX_CLKCMU_FSYS2_ETHERNET, 0, 3),
+
+	/* G2D */
+	MUX(MOUT_CLKCMU_G2D_G2D, "mout_clkcmu_g2d_g2d", mout_clkcmu_g2d_g2d_p,
+	    CLK_CON_MUX_MUX_CLKCMU_G2D_G2D, 0, 3),
+	MUX(MOUT_CLKCMU_G2D_MSCL, "mout_clkcmu_g2d_mscl",
+	    mout_clkcmu_fsys1_bus_p, CLK_CON_MUX_MUX_CLKCMU_G2D_MSCL, 0, 2),
+
+	/* G3D0 */
+	MUX(MOUT_CLKCMU_G3D00_SWITCH, "mout_clkcmu_g3d00_switch",
+	    mout_clkcmu_g3d0_switch_p, CLK_CON_MUX_MUX_CLKCMU_G3D00_SWITCH,
+	    0, 2),
+	MUX(MOUT_CLKCMU_G3D01_SWITCH, "mout_clkcmu_g3d01_switch",
+	    mout_clkcmu_g3d0_switch_p, CLK_CON_MUX_MUX_CLKCMU_G3D01_SWITCH,
+	    0, 2),
+
+	/* G3D1 */
+	MUX(MOUT_CLKCMU_G3D1_SWITCH, "mout_clkcmu_g3d1_switch",
+	    mout_clkcmu_g3d1_switch_p, CLK_CON_MUX_MUX_CLKCMU_G3D1_SWITCH,
+	    0, 2),
+
+	/* ISPB */
+	MUX(MOUT_CLKCMU_ISPB_BUS, "mout_clkcmu_ispb_bus",
+	    mout_clkcmu_acc_bus_p, CLK_CON_MUX_MUX_CLKCMU_ISPB_BUS, 0, 2),
+
+	/* MFC */
+	MUX(MOUT_CLKCMU_MFC_MFC, "mout_clkcmu_mfc_mfc",
+	    mout_clkcmu_g3d1_switch_p, CLK_CON_MUX_MUX_CLKCMU_MFC_MFC, 0, 2),
+	MUX(MOUT_CLKCMU_MFC_WFD, "mout_clkcmu_mfc_wfd",
+	    mout_clkcmu_fsys0_bus_p, CLK_CON_MUX_MUX_CLKCMU_MFC_WFD, 0, 2),
+
+	/* MIF */
+	MUX(MOUT_CLKCMU_MIF_SWITCH, "mout_clkcmu_mif_switch",
+	    mout_clkcmu_mif_switch_p, CLK_CON_MUX_MUX_CLKCMU_MIF_SWITCH, 0, 3),
+	MUX(MOUT_CLKCMU_MIF_BUSP, "mout_clkcmu_mif_busp",
+	    mout_clkcmu_fsys1_bus_p, CLK_CON_MUX_MUX_CLKCMU_MIF_BUSP, 0, 2),
+
+	/* NPU */
+	MUX(MOUT_CLKCMU_NPU_BUS, "mout_clkcmu_npu_bus", mout_clkcmu_npu_bus_p,
+	    CLK_CON_MUX_MUX_CLKCMU_NPU_BUS, 0, 3),
+
+	/* PERIC0 */
+	MUX(MOUT_CLKCMU_PERIC0_BUS, "mout_clkcmu_peric0_bus",
+	    mout_clkcmu_peric0_bus_p, CLK_CON_MUX_MUX_CLKCMU_PERIC0_BUS, 0, 1),
+	MUX(MOUT_CLKCMU_PERIC0_IP, "mout_clkcmu_peric0_ip",
+	    mout_clkcmu_peric0_bus_p, CLK_CON_MUX_MUX_CLKCMU_PERIC0_IP, 0, 1),
+
+	/* PERIC1 */
+	MUX(MOUT_CLKCMU_PERIC1_BUS, "mout_clkcmu_peric1_bus",
+	    mout_clkcmu_peric0_bus_p, CLK_CON_MUX_MUX_CLKCMU_PERIC1_BUS, 0, 1),
+	MUX(MOUT_CLKCMU_PERIC1_IP, "mout_clkcmu_peric1_ip",
+	    mout_clkcmu_peric0_bus_p, CLK_CON_MUX_MUX_CLKCMU_PERIC1_IP, 0, 1),
+
+	/* PERIS */
+	MUX(MOUT_CLKCMU_PERIS_BUS, "mout_clkcmu_peris_bus",
+	    mout_clkcmu_peric0_bus_p, CLK_CON_MUX_MUX_CLKCMU_PERIS_BUS, 0, 1),
+};
+
+static const struct samsung_div_clock top_div_clks[] __initconst = {
+	/* CMU_TOP_PURECLKCOMP */
+	DIV(DOUT_SHARED0_DIV3, "dout_shared0_div3", "mout_shared0_pll",
+	    CLK_CON_DIV_PLL_SHARED0_DIV3, 0, 2),
+	DIV(DOUT_SHARED0_DIV2, "dout_shared0_div2", "mout_shared0_pll",
+	    CLK_CON_DIV_PLL_SHARED0_DIV2, 0, 1),
+
+	DIV(DOUT_SHARED1_DIV3, "dout_shared1_div3", "mout_shared1_pll",
+	    CLK_CON_DIV_PLL_SHARED1_DIV3, 0, 2),
+	DIV(DOUT_SHARED1_DIV2, "dout_shared1_div2", "mout_shared1_pll",
+	    CLK_CON_DIV_PLL_SHARED1_DIV2, 0, 1),
+	DIV(DOUT_SHARED1_DIV4, "dout_shared1_div4", "dout_shared1_div2",
+	    CLK_CON_DIV_PLL_SHARED1_DIV4, 0, 1),
+
+	DIV(DOUT_SHARED2_DIV3, "dout_shared2_div3", "mout_shared2_pll",
+	    CLK_CON_DIV_PLL_SHARED2_DIV3, 0, 2),
+	DIV(DOUT_SHARED2_DIV2, "dout_shared2_div2", "mout_shared2_pll",
+	    CLK_CON_DIV_PLL_SHARED2_DIV2, 0, 1),
+	DIV(DOUT_SHARED2_DIV4, "dout_shared2_div4", "dout_shared2_div2",
+	    CLK_CON_DIV_PLL_SHARED2_DIV4, 0, 1),
+
+	DIV(DOUT_SHARED4_DIV2, "dout_shared4_div2", "mout_shared4_pll",
+	    CLK_CON_DIV_PLL_SHARED4_DIV2, 0, 1),
+	DIV(DOUT_SHARED4_DIV4, "dout_shared4_div4", "dout_shared4_div2",
+	    CLK_CON_DIV_PLL_SHARED4_DIV4, 0, 1),
+
+	/* BOOST */
+	DIV(DOUT_CLKCMU_CMU_BOOST, "dout_clkcmu_cmu_boost",
+	    "gout_clkcmu_cmu_boost", CLK_CON_DIV_DIV_CLKCMU_CMU_BOOST, 0, 2),
+
+	/* ACC */
+	DIV(DOUT_CLKCMU_ACC_BUS, "dout_clkcmu_acc_bus", "gout_clkcmu_acc_bus",
+	    CLK_CON_DIV_CLKCMU_ACC_BUS, 0, 4),
+
+	/* APM */
+	DIV(DOUT_CLKCMU_APM_BUS, "dout_clkcmu_apm_bus", "gout_clkcmu_apm_bus",
+	    CLK_CON_DIV_CLKCMU_APM_BUS, 0, 3),
+
+	/* AUD */
+	DIV(DOUT_CLKCMU_AUD_CPU, "dout_clkcmu_aud_cpu", "gout_clkcmu_aud_cpu",
+	    CLK_CON_DIV_CLKCMU_AUD_CPU, 0, 3),
+	DIV(DOUT_CLKCMU_AUD_BUS, "dout_clkcmu_aud_bus", "gout_clkcmu_aud_bus",
+	    CLK_CON_DIV_CLKCMU_AUD_BUS, 0, 4),
+
+	/* BUSC */
+	DIV(DOUT_CLKCMU_BUSC_BUS, "dout_clkcmu_busc_bus",
+	    "gout_clkcmu_busc_bus", CLK_CON_DIV_CLKCMU_BUSC_BUS, 0, 4),
+
+	/* BUSMC */
+	DIV(DOUT_CLKCMU_BUSMC_BUS, "dout_clkcmu_busmc_bus",
+	    "gout_clkcmu_busmc_bus", CLK_CON_DIV_CLKCMU_BUSMC_BUS, 0, 4),
+
+	/* CORE */
+	DIV(DOUT_CLKCMU_CORE_BUS, "dout_clkcmu_core_bus",
+	    "gout_clkcmu_core_bus", CLK_CON_DIV_CLKCMU_CORE_BUS, 0, 4),
+
+	/* CPUCL0 */
+	DIV(DOUT_CLKCMU_CPUCL0_SWITCH, "dout_clkcmu_cpucl0_switch",
+	    "gout_clkcmu_cpucl0_switch", CLK_CON_DIV_CLKCMU_CPUCL0_SWITCH,
+	    0, 3),
+	DIV(DOUT_CLKCMU_CPUCL0_CLUSTER, "dout_clkcmu_cpucl0_cluster",
+	    "gout_clkcmu_cpucl0_cluster", CLK_CON_DIV_CLKCMU_CPUCL0_CLUSTER,
+	    0, 3),
+
+	/* CPUCL1 */
+	DIV(DOUT_CLKCMU_CPUCL1_SWITCH, "dout_clkcmu_cpucl1_switch",
+	    "gout_clkcmu_cpucl1_switch", CLK_CON_DIV_CLKCMU_CPUCL1_SWITCH,
+	    0, 3),
+	DIV(DOUT_CLKCMU_CPUCL1_CLUSTER, "dout_clkcmu_cpucl1_cluster",
+	    "gout_clkcmu_cpucl1_cluster", CLK_CON_DIV_CLKCMU_CPUCL1_CLUSTER,
+	    0, 3),
+
+	/* DPTX */
+	DIV(DOUT_CLKCMU_DPTX_BUS, "dout_clkcmu_dptx_bus",
+	    "gout_clkcmu_dptx_bus", CLK_CON_DIV_CLKCMU_DPTX_BUS, 0, 4),
+	DIV(DOUT_CLKCMU_DPTX_DPGTC, "dout_clkcmu_dptx_dpgtc",
+	    "gout_clkcmu_dptx_dpgtc", CLK_CON_DIV_CLKCMU_DPTX_DPGTC, 0, 3),
+
+	/* DPUM */
+	DIV(DOUT_CLKCMU_DPUM_BUS, "dout_clkcmu_dpum_bus",
+	    "gout_clkcmu_dpum_bus", CLK_CON_DIV_CLKCMU_DPUM_BUS, 0, 4),
+
+	/* DPUS */
+	DIV(DOUT_CLKCMU_DPUS0_BUS, "dout_clkcmu_dpus0_bus",
+	    "gout_clkcmu_dpus0_bus", CLK_CON_DIV_CLKCMU_DPUS0_BUS, 0, 4),
+	DIV(DOUT_CLKCMU_DPUS1_BUS, "dout_clkcmu_dpus1_bus",
+	    "gout_clkcmu_dpus1_bus", CLK_CON_DIV_CLKCMU_DPUS1_BUS, 0, 4),
+
+	/* FSYS0 */
+	DIV(DOUT_CLKCMU_FSYS0_BUS, "dout_clkcmu_fsys0_bus",
+	    "gout_clkcmu_fsys0_bus", CLK_CON_DIV_CLKCMU_FSYS0_BUS, 0, 4),
+
+	/* FSYS1 */
+	DIV(DOUT_CLKCMU_FSYS1_BUS, "dout_clkcmu_fsys1_bus",
+	    "gout_clkcmu_fsys1_bus", CLK_CON_DIV_CLKCMU_FSYS1_BUS, 0, 4),
+	DIV(DOUT_CLKCMU_FSYS1_USBDRD, "dout_clkcmu_fsys1_usbdrd",
+	    "gout_clkcmu_fsys1_usbdrd", CLK_CON_DIV_CLKCMU_FSYS1_USBDRD, 0, 4),
+
+	/* FSYS2 */
+	DIV(DOUT_CLKCMU_FSYS2_BUS, "dout_clkcmu_fsys2_bus",
+	    "gout_clkcmu_fsys2_bus", CLK_CON_DIV_CLKCMU_FSYS2_BUS, 0, 4),
+	DIV(DOUT_CLKCMU_FSYS2_UFS_EMBD, "dout_clkcmu_fsys2_ufs_embd",
+	    "gout_clkcmu_fsys2_ufs_embd", CLK_CON_DIV_CLKCMU_FSYS2_UFS_EMBD,
+	    0, 3),
+	DIV(DOUT_CLKCMU_FSYS2_ETHERNET, "dout_clkcmu_fsys2_ethernet",
+	    "gout_clkcmu_fsys2_ethernet", CLK_CON_DIV_CLKCMU_FSYS2_ETHERNET,
+	    0, 3),
+
+	/* G2D */
+	DIV(DOUT_CLKCMU_G2D_G2D, "dout_clkcmu_g2d_g2d", "gout_clkcmu_g2d_g2d",
+	    CLK_CON_DIV_CLKCMU_G2D_G2D, 0, 4),
+	DIV(DOUT_CLKCMU_G2D_MSCL, "dout_clkcmu_g2d_mscl",
+	    "gout_clkcmu_g2d_mscl", CLK_CON_DIV_CLKCMU_G2D_MSCL, 0, 4),
+
+	/* G3D0 */
+	DIV(DOUT_CLKCMU_G3D00_SWITCH, "dout_clkcmu_g3d00_switch",
+	    "gout_clkcmu_g3d00_switch", CLK_CON_DIV_CLKCMU_G3D00_SWITCH, 0, 3),
+	DIV(DOUT_CLKCMU_G3D01_SWITCH, "dout_clkcmu_g3d01_switch",
+	    "gout_clkcmu_g3d01_switch", CLK_CON_DIV_CLKCMU_G3D01_SWITCH, 0, 3),
+
+	/* G3D1 */
+	DIV(DOUT_CLKCMU_G3D1_SWITCH, "dout_clkcmu_g3d1_switch",
+	    "gout_clkcmu_g3d1_switch", CLK_CON_DIV_CLKCMU_G3D1_SWITCH, 0, 3),
+
+	/* ISPB */
+	DIV(DOUT_CLKCMU_ISPB_BUS, "dout_clkcmu_ispb_bus",
+	    "gout_clkcmu_ispb_bus", CLK_CON_DIV_CLKCMU_ISPB_BUS, 0, 4),
+
+	/* MFC */
+	DIV(DOUT_CLKCMU_MFC_MFC, "dout_clkcmu_mfc_mfc", "gout_clkcmu_mfc_mfc",
+	    CLK_CON_DIV_CLKCMU_MFC_MFC, 0, 4),
+	DIV(DOUT_CLKCMU_MFC_WFD, "dout_clkcmu_mfc_wfd", "gout_clkcmu_mfc_wfd",
+	    CLK_CON_DIV_CLKCMU_MFC_WFD, 0, 4),
+
+	/* MIF */
+	DIV(DOUT_CLKCMU_MIF_BUSP, "dout_clkcmu_mif_busp",
+	    "gout_clkcmu_mif_busp", CLK_CON_DIV_CLKCMU_MIF_BUSP, 0, 4),
+
+	/* NPU */
+	DIV(DOUT_CLKCMU_NPU_BUS, "dout_clkcmu_npu_bus", "gout_clkcmu_npu_bus",
+	    CLK_CON_DIV_CLKCMU_NPU_BUS, 0, 4),
+
+	/* PERIC0 */
+	DIV(DOUT_CLKCMU_PERIC0_BUS, "dout_clkcmu_peric0_bus",
+	    "gout_clkcmu_peric0_bus", CLK_CON_DIV_CLKCMU_PERIC0_BUS, 0, 4),
+	DIV(DOUT_CLKCMU_PERIC0_IP, "dout_clkcmu_peric0_ip",
+	    "gout_clkcmu_peric0_ip", CLK_CON_DIV_CLKCMU_PERIC0_IP, 0, 4),
+
+	/* PERIC1 */
+	DIV(DOUT_CLKCMU_PERIC1_BUS, "dout_clkcmu_peric1_bus",
+	    "gout_clkcmu_peric1_bus", CLK_CON_DIV_CLKCMU_PERIC1_BUS, 0, 4),
+	DIV(DOUT_CLKCMU_PERIC1_IP, "dout_clkcmu_peric1_ip",
+	    "gout_clkcmu_peric1_ip", CLK_CON_DIV_CLKCMU_PERIC1_IP, 0, 4),
+
+	/* PERIS */
+	DIV(DOUT_CLKCMU_PERIS_BUS, "dout_clkcmu_peris_bus",
+	    "gout_clkcmu_peris_bus", CLK_CON_DIV_CLKCMU_PERIS_BUS, 0, 4),
+};
+
+static const struct samsung_fixed_factor_clock top_fixed_factor_clks[] __initconst = {
+	FFACTOR(DOUT_CLKCMU_FSYS0_PCIE, "dout_clkcmu_fsys0_pcie",
+		"gout_clkcmu_fsys0_pcie", 1, 4, 0),
+};
+
+static const struct samsung_gate_clock top_gate_clks[] __initconst = {
+	/* BOOST */
+	GATE(GOUT_CLKCMU_CMU_BOOST, "gout_clkcmu_cmu_boost",
+	     "mout_clkcmu_cmu_boost", CLK_CON_GAT_GATE_CLKCMU_CMU_BOOST,
+	     21, 0, 0),
+
+	GATE(GOUT_CLKCMU_CPUCL0_BOOST, "gout_clkcmu_cpucl0_boost",
+	     "dout_cmu_boost", CLK_CON_GAT_CLKCMU_CMU_CPUCL0_BOOST, 21, 0, 0),
+	GATE(GOUT_CLKCMU_CPUCL1_BOOST, "gout_clkcmu_cpucl1_boost",
+	     "dout_cmu_boost", CLK_CON_GAT_CLKCMU_CMU_CPUCL1_BOOST, 21, 0, 0),
+	GATE(GOUT_CLKCMU_CORE_BOOST, "gout_clkcmu_core_boost",
+	     "dout_cmu_boost", CLK_CON_GAT_CLKCMU_CMU_CORE_BOOST, 21, 0, 0),
+	GATE(GOUT_CLKCMU_BUSC_BOOST, "gout_clkcmu_busc_boost",
+	     "dout_cmu_boost", CLK_CON_GAT_CLKCMU_CMU_BUSC_BOOST, 21, 0, 0),
+
+	GATE(GOUT_CLKCMU_BUSMC_BOOST, "gout_clkcmu_busmc_boost",
+	     "dout_cmu_boost", CLK_CON_GAT_CLKCMU_CMU_BUSMC_BOOST, 21, 0, 0),
+	GATE(GOUT_CLKCMU_MIF_BOOST, "gout_clkcmu_mif_boost", "dout_cmu_boost",
+	     CLK_CON_GAT_CLKCMU_CMU_MIF_BOOST, 21, 0, 0),
+
+	/* ACC */
+	GATE(GOUT_CLKCMU_ACC_BUS, "gout_clkcmu_acc_bus", "mout_clkcmu_acc_bus",
+	     CLK_CON_GAT_GATE_CLKCMU_ACC_BUS, 21, 0, 0),
+
+	/* APM */
+	GATE(GOUT_CLKCMU_APM_BUS, "gout_clkcmu_apm_bus", "mout_clkcmu_apm_bus",
+	     CLK_CON_GAT_GATE_CLKCMU_APM_BUS, 21, CLK_IGNORE_UNUSED, 0),
+
+	/* AUD */
+	GATE(GOUT_CLKCMU_AUD_CPU, "gout_clkcmu_aud_cpu", "mout_clkcmu_aud_cpu",
+	     CLK_CON_GAT_GATE_CLKCMU_AUD_CPU, 21, 0, 0),
+	GATE(GOUT_CLKCMU_AUD_BUS, "gout_clkcmu_aud_bus", "mout_clkcmu_aud_bus",
+	     CLK_CON_GAT_GATE_CLKCMU_AUD_BUS, 21, 0, 0),
+
+	/* BUSC */
+	GATE(GOUT_CLKCMU_BUSC_BUS, "gout_clkcmu_busc_bus",
+	     "mout_clkcmu_busc_bus", CLK_CON_GAT_GATE_CLKCMU_BUSC_BUS, 21,
+	     CLK_IS_CRITICAL, 0),
+
+	/* BUSMC */
+	GATE(GOUT_CLKCMU_BUSMC_BUS, "gout_clkcmu_busmc_bus",
+	     "mout_clkcmu_busmc_bus", CLK_CON_GAT_GATE_CLKCMU_BUSMC_BUS, 21,
+	     CLK_IS_CRITICAL, 0),
+
+	/* CORE */
+	GATE(GOUT_CLKCMU_CORE_BUS, "gout_clkcmu_core_bus",
+	     "mout_clkcmu_core_bus", CLK_CON_GAT_GATE_CLKCMU_CORE_BUS,
+	     21, 0, 0),
+
+	/* CPUCL0 */
+	GATE(GOUT_CLKCMU_CPUCL0_SWITCH, "gout_clkcmu_cpucl0_switch",
+	     "mout_clkcmu_cpucl0_switch",
+	     CLK_CON_GAT_GATE_CLKCMU_CPUCL0_SWITCH, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(GOUT_CLKCMU_CPUCL0_CLUSTER, "gout_clkcmu_cpucl0_cluster",
+	     "mout_clkcmu_cpucl0_cluster",
+	     CLK_CON_GAT_GATE_CLKCMU_CPUCL0_CLUSTER, 21, CLK_IGNORE_UNUSED, 0),
+
+	/* CPUCL1 */
+	GATE(GOUT_CLKCMU_CPUCL1_SWITCH, "gout_clkcmu_cpucl1_switch",
+	     "mout_clkcmu_cpucl1_switch",
+	     CLK_CON_GAT_GATE_CLKCMU_CPUCL1_SWITCH, 21, CLK_IGNORE_UNUSED, 0),
+	GATE(GOUT_CLKCMU_CPUCL1_CLUSTER, "gout_clkcmu_cpucl1_cluster",
+	     "mout_clkcmu_cpucl1_cluster",
+	     CLK_CON_GAT_GATE_CLKCMU_CPUCL1_CLUSTER, 21, CLK_IGNORE_UNUSED, 0),
+
+	/* DPTX */
+	GATE(GOUT_CLKCMU_DPTX_BUS, "gout_clkcmu_dptx_bus",
+	     "mout_clkcmu_dptx_bus", CLK_CON_GAT_GATE_CLKCMU_DPTX_BUS,
+	     21, 0, 0),
+	GATE(GOUT_CLKCMU_DPTX_DPGTC, "gout_clkcmu_dptx_dpgtc",
+	     "mout_clkcmu_dptx_dpgtc", CLK_CON_GAT_GATE_CLKCMU_DPTX_DPGTC,
+	     21, 0, 0),
+
+	/* DPUM */
+	GATE(GOUT_CLKCMU_DPUM_BUS, "gout_clkcmu_dpum_bus",
+	     "mout_clkcmu_dpum_bus", CLK_CON_GAT_GATE_CLKCMU_DPUM_BUS,
+	     21, 0, 0),
+
+	/* DPUS */
+	GATE(GOUT_CLKCMU_DPUS0_BUS, "gout_clkcmu_dpus0_bus",
+	     "mout_clkcmu_dpus0_bus", CLK_CON_GAT_GATE_CLKCMU_DPUS0_BUS,
+	     21, 0, 0),
+	GATE(GOUT_CLKCMU_DPUS1_BUS, "gout_clkcmu_dpus1_bus",
+	     "mout_clkcmu_dpus1_bus", CLK_CON_GAT_GATE_CLKCMU_DPUS1_BUS,
+	     21, 0, 0),
+
+	/* FSYS0 */
+	GATE(GOUT_CLKCMU_FSYS0_BUS, "gout_clkcmu_fsys0_bus",
+	     "mout_clkcmu_fsys0_bus", CLK_CON_GAT_GATE_CLKCMU_FSYS0_BUS,
+	     21, 0, 0),
+	GATE(GOUT_CLKCMU_FSYS0_PCIE, "gout_clkcmu_fsys0_pcie",
+	     "mout_clkcmu_fsys0_pcie", CLK_CON_GAT_GATE_CLKCMU_FSYS0_PCIE,
+	     21, 0, 0),
+
+	/* FSYS1 */
+	GATE(GOUT_CLKCMU_FSYS1_BUS, "gout_clkcmu_fsys1_bus",
+	     "mout_clkcmu_fsys1_bus", CLK_CON_GAT_GATE_CLKCMU_FSYS1_BUS,
+	     21, 0, 0),
+	GATE(GOUT_CLKCMU_FSYS1_USBDRD, "gout_clkcmu_fsys1_usbdrd",
+	     "mout_clkcmu_fsys1_usbdrd", CLK_CON_GAT_GATE_CLKCMU_FSYS1_USBDRD,
+	     21, 0, 0),
+	GATE(GOUT_CLKCMU_FSYS1_MMC_CARD, "gout_clkcmu_fsys1_mmc_card",
+	     "mout_clkcmu_fsys1_mmc_card",
+	     CLK_CON_GAT_GATE_CLKCMU_FSYS1_MMC_CARD, 21, 0, 0),
+
+	/* FSYS2 */
+	GATE(GOUT_CLKCMU_FSYS2_BUS, "gout_clkcmu_fsys2_bus",
+	     "mout_clkcmu_fsys2_bus", CLK_CON_GAT_GATE_CLKCMU_FSYS2_BUS,
+	     21, 0, 0),
+	GATE(GOUT_CLKCMU_FSYS2_UFS_EMBD, "gout_clkcmu_fsys2_ufs_embd",
+	     "mout_clkcmu_fsys2_ufs_embd",
+	     CLK_CON_GAT_GATE_CLKCMU_FSYS2_UFS_EMBD, 21, 0, 0),
+	GATE(GOUT_CLKCMU_FSYS2_ETHERNET, "gout_clkcmu_fsys2_ethernet",
+	     "mout_clkcmu_fsys2_ethernet",
+	     CLK_CON_GAT_GATE_CLKCMU_FSYS2_ETHERNET, 21, 0, 0),
+
+	/* G2D */
+	GATE(GOUT_CLKCMU_G2D_G2D, "gout_clkcmu_g2d_g2d",
+	     "mout_clkcmu_g2d_g2d", CLK_CON_GAT_GATE_CLKCMU_G2D_G2D, 21, 0, 0),
+	GATE(GOUT_CLKCMU_G2D_MSCL, "gout_clkcmu_g2d_mscl",
+	     "mout_clkcmu_g2d_mscl", CLK_CON_GAT_GATE_CLKCMU_G2D_MSCL,
+	     21, 0, 0),
+
+	/* G3D0 */
+	GATE(GOUT_CLKCMU_G3D00_SWITCH, "gout_clkcmu_g3d00_switch",
+	     "mout_clkcmu_g3d00_switch", CLK_CON_GAT_GATE_CLKCMU_G3D00_SWITCH,
+	     21, 0, 0),
+	GATE(GOUT_CLKCMU_G3D01_SWITCH, "gout_clkcmu_g3d01_switch",
+	     "mout_clkcmu_g3d01_switch", CLK_CON_GAT_GATE_CLKCMU_G3D01_SWITCH,
+	     21, 0, 0),
+
+	/* G3D1 */
+	GATE(GOUT_CLKCMU_G3D1_SWITCH, "gout_clkcmu_g3d1_switch",
+	     "mout_clkcmu_g3d1_switch", CLK_CON_GAT_GATE_CLKCMU_G3D1_SWITCH,
+	     21, 0, 0),
+
+	/* ISPB */
+	GATE(GOUT_CLKCMU_ISPB_BUS, "gout_clkcmu_ispb_bus",
+	     "mout_clkcmu_ispb_bus", CLK_CON_GAT_GATE_CLKCMU_ISPB_BUS,
+	     21, 0, 0),
+
+	/* MFC */
+	GATE(GOUT_CLKCMU_MFC_MFC, "gout_clkcmu_mfc_mfc", "mout_clkcmu_mfc_mfc",
+	     CLK_CON_GAT_GATE_CLKCMU_MFC_MFC, 21, 0, 0),
+	GATE(GOUT_CLKCMU_MFC_WFD, "gout_clkcmu_mfc_wfd", "mout_clkcmu_mfc_wfd",
+	     CLK_CON_GAT_GATE_CLKCMU_MFC_WFD, 21, 0, 0),
+
+	/* MIF */
+	GATE(GOUT_CLKCMU_MIF_SWITCH, "gout_clkcmu_mif_switch",
+	     "mout_clkcmu_mif_switch", CLK_CON_GAT_GATE_CLKCMU_MIF_SWITCH,
+	     21, CLK_IGNORE_UNUSED, 0),
+	GATE(GOUT_CLKCMU_MIF_BUSP, "gout_clkcmu_mif_busp",
+	     "mout_clkcmu_mif_busp", CLK_CON_GAT_GATE_CLKCMU_MIF_BUSP,
+	     21, CLK_IGNORE_UNUSED, 0),
+
+	/* NPU */
+	GATE(GOUT_CLKCMU_NPU_BUS, "gout_clkcmu_npu_bus", "mout_clkcmu_npu_bus",
+	     CLK_CON_GAT_GATE_CLKCMU_NPU_BUS, 21, 0, 0),
+
+	/* PERIC0 */
+	GATE(GOUT_CLKCMU_PERIC0_BUS, "gout_clkcmu_peric0_bus",
+	     "mout_clkcmu_peric0_bus", CLK_CON_GAT_GATE_CLKCMU_PERIC0_BUS,
+	     21, 0, 0),
+	GATE(GOUT_CLKCMU_PERIC0_IP, "gout_clkcmu_peric0_ip",
+	     "mout_clkcmu_peric0_ip", CLK_CON_GAT_GATE_CLKCMU_PERIC0_IP,
+	     21, 0, 0),
+
+	/* PERIC1 */
+	GATE(GOUT_CLKCMU_PERIC1_BUS, "gout_clkcmu_peric1_bus",
+	     "mout_clkcmu_peric1_bus", CLK_CON_GAT_GATE_CLKCMU_PERIC1_BUS,
+	     21, 0, 0),
+	GATE(GOUT_CLKCMU_PERIC1_IP, "gout_clkcmu_peric1_ip",
+	     "mout_clkcmu_peric1_ip", CLK_CON_GAT_GATE_CLKCMU_PERIC1_IP,
+	     21, 0, 0),
+
+	/* PERIS */
+	GATE(GOUT_CLKCMU_PERIS_BUS, "gout_clkcmu_peris_bus",
+	     "mout_clkcmu_peris_bus", CLK_CON_GAT_GATE_CLKCMU_PERIS_BUS,
+	     21, CLK_IGNORE_UNUSED, 0),
+};
+
+static const struct samsung_cmu_info top_cmu_info __initconst = {
+	.pll_clks		= top_pll_clks,
+	.nr_pll_clks		= ARRAY_SIZE(top_pll_clks),
+	.mux_clks		= top_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(top_mux_clks),
+	.div_clks		= top_div_clks,
+	.nr_div_clks		= ARRAY_SIZE(top_div_clks),
+	.fixed_factor_clks	= top_fixed_factor_clks,
+	.nr_fixed_factor_clks	= ARRAY_SIZE(top_fixed_factor_clks),
+	.gate_clks		= top_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(top_gate_clks),
+	.nr_clk_ids		= TOP_NR_CLK,
+	.clk_regs		= top_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(top_clk_regs),
+};
+
+static void __init exynosautov9_cmu_top_init(struct device_node *np)
+{
+	exynos_arm64_register_cmu(NULL, np, &top_cmu_info);
+}
+
+/* Register CMU_TOP early, as it's a dependency for other early domains */
+CLK_OF_DECLARE(exynosautov9_cmu_top, "samsung,exynosautov9-cmu-top",
+	       exynosautov9_cmu_top_init);
-- 
2.36.0

Re: [PATCH v3 03/12] clk: samsung: add top clock support for Exynos Auto v9 SoC

[Krzysztof Kozlowski]

On 04/05/2022 09:51, Chanho Park wrote:
> This adds support for CMU_TOP which generates clocks for all the
> function blocks such as CORE, FSYS0/1/2, PERIC0/1 and so on. For
> CMU_TOP, PLL_SHARED0,1,2,3 and 4 will be the sources of this block
> and they will generate bus clocks.
> 
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v3 03/12] clk: samsung: add top clock support for Exynos Auto v9 SoC

[Chanwoo Choi]

On 22. 5. 4. 16:51, Chanho Park wrote:
> This adds support for CMU_TOP which generates clocks for all the
> function blocks such as CORE, FSYS0/1/2, PERIC0/1 and so on. For
> CMU_TOP, PLL_SHARED0,1,2,3 and 4 will be the sources of this block
> and they will generate bus clocks.
> 
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>   drivers/clk/samsung/Makefile           |   1 +
>   drivers/clk/samsung/clk-exynosautov9.c | 958 +++++++++++++++++++++++++
>   2 files changed, 959 insertions(+)
>   create mode 100644 drivers/clk/samsung/clk-exynosautov9.c
> 

(snip)

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>


-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

[PATCH v3 04/12] clk: samsung: exynosautov9: add cmu_core clock support

[Chanho Park]

Add CMU_CORE clock which represents Core BUS clocks. The source clocks
of this CMU block are oscclk or dout_clkcmu_core_bus. Thus, two source
clocks should be provided via device tree. All the gate clocks are
defined as CLK_IS_CRITICAL because they control(gate/ungate) core bus
clocks but not been assigned to any drivers.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 drivers/clk/samsung/clk-exynosautov9.c | 92 ++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynosautov9.c b/drivers/clk/samsung/clk-exynosautov9.c
index 96c6c9dbc995..984ecba83e42 100644
--- a/drivers/clk/samsung/clk-exynosautov9.c
+++ b/drivers/clk/samsung/clk-exynosautov9.c
@@ -956,3 +956,95 @@ static void __init exynosautov9_cmu_top_init(struct device_node *np)
 /* Register CMU_TOP early, as it's a dependency for other early domains */
 CLK_OF_DECLARE(exynosautov9_cmu_top, "samsung,exynosautov9-cmu-top",
 	       exynosautov9_cmu_top_init);
+
+/* ---- CMU_CORE ----------------------------------------------------------- */
+
+/* Register Offset definitions for CMU_CORE (0x1b030000) */
+#define PLL_CON0_MUX_CLKCMU_CORE_BUS_USER				0x0600
+#define CLK_CON_MUX_MUX_CORE_CMUREF					0x1000
+#define CLK_CON_DIV_DIV_CLK_CORE_BUSP					0x1800
+#define CLK_CON_GAT_CLK_BLK_CORE_UID_CCI_IPCLKPORT_CLK			0x2000
+#define CLK_CON_GAT_CLK_BLK_CORE_UID_CCI_IPCLKPORT_PCLK			0x2004
+#define CLK_CON_GAT_CLK_BLK_CORE_UID_CORE_CMU_CORE_IPCLKPORT_PCLK	0x2008
+
+static const unsigned long core_clk_regs[] __initconst = {
+	PLL_CON0_MUX_CLKCMU_CORE_BUS_USER,
+	CLK_CON_MUX_MUX_CORE_CMUREF,
+	CLK_CON_DIV_DIV_CLK_CORE_BUSP,
+	CLK_CON_GAT_CLK_BLK_CORE_UID_CCI_IPCLKPORT_CLK,
+	CLK_CON_GAT_CLK_BLK_CORE_UID_CCI_IPCLKPORT_PCLK,
+	CLK_CON_GAT_CLK_BLK_CORE_UID_CORE_CMU_CORE_IPCLKPORT_PCLK,
+};
+
+/* List of parent clocks for Muxes in CMU_CORE */
+PNAME(mout_core_bus_user_p) = { "oscclk", "dout_clkcmu_core_bus" };
+
+static const struct samsung_mux_clock core_mux_clks[] __initconst = {
+	MUX(CLK_MOUT_CORE_BUS_USER, "mout_core_bus_user", mout_core_bus_user_p,
+	    PLL_CON0_MUX_CLKCMU_CORE_BUS_USER, 4, 1),
+};
+
+static const struct samsung_div_clock core_div_clks[] __initconst = {
+	DIV(CLK_DOUT_CORE_BUSP, "dout_core_busp", "mout_core_bus_user",
+	    CLK_CON_DIV_DIV_CLK_CORE_BUSP, 0, 3),
+};
+
+static const struct samsung_gate_clock core_gate_clks[] __initconst = {
+	GATE(CLK_GOUT_CORE_CCI_CLK, "gout_core_cci_clk", "mout_core_bus_user",
+	     CLK_CON_GAT_CLK_BLK_CORE_UID_CCI_IPCLKPORT_CLK, 21,
+	     CLK_IS_CRITICAL, 0),
+	GATE(CLK_GOUT_CORE_CCI_PCLK, "gout_core_cci_pclk", "dout_core_busp",
+	     CLK_CON_GAT_CLK_BLK_CORE_UID_CCI_IPCLKPORT_PCLK, 21,
+	     CLK_IS_CRITICAL, 0),
+	GATE(CLK_GOUT_CORE_CMU_CORE_PCLK, "gout_core_cmu_core_pclk",
+	     "dout_core_busp",
+	     CLK_CON_GAT_CLK_BLK_CORE_UID_CORE_CMU_CORE_IPCLKPORT_PCLK, 21,
+	     CLK_IS_CRITICAL, 0),
+};
+
+static const struct samsung_cmu_info core_cmu_info __initconst = {
+	.mux_clks		= core_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(core_mux_clks),
+	.div_clks		= core_div_clks,
+	.nr_div_clks		= ARRAY_SIZE(core_div_clks),
+	.gate_clks		= core_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(core_gate_clks),
+	.nr_clk_ids		= CORE_NR_CLK,
+	.clk_regs		= core_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(core_clk_regs),
+	.clk_name		= "dout_clkcmu_core_bus",
+};
+
+static int __init exynosautov9_cmu_probe(struct platform_device *pdev)
+{
+	const struct samsung_cmu_info *info;
+	struct device *dev = &pdev->dev;
+
+	info = of_device_get_match_data(dev);
+	exynos_arm64_register_cmu(dev, dev->of_node, info);
+
+	return 0;
+}
+
+static const struct of_device_id exynosautov9_cmu_of_match[] = {
+	{
+		.compatible = "samsung,exynosautov9-cmu-core",
+		.data = &core_cmu_info,
+	}, {
+	},
+};
+
+static struct platform_driver exynosautov9_cmu_driver __refdata = {
+	.driver = {
+		.name = "exynosautov9-cmu",
+		.of_match_table = exynosautov9_cmu_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = exynosautov9_cmu_probe,
+};
+
+static int __init exynosautov9_cmu_init(void)
+{
+	return platform_driver_register(&exynosautov9_cmu_driver);
+}
+core_initcall(exynosautov9_cmu_init);
-- 
2.36.0

Re: [PATCH v3 04/12] clk: samsung: exynosautov9: add cmu_core clock support

[Chanwoo Choi]

On 22. 5. 4. 16:51, Chanho Park wrote:
> Add CMU_CORE clock which represents Core BUS clocks. The source clocks
> of this CMU block are oscclk or dout_clkcmu_core_bus. Thus, two source
> clocks should be provided via device tree. All the gate clocks are
> defined as CLK_IS_CRITICAL because they control(gate/ungate) core bus
> clocks but not been assigned to any drivers.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>   drivers/clk/samsung/clk-exynosautov9.c | 92 ++++++++++++++++++++++++++
>   1 file changed, 92 insertions(+)



(snip)

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>


-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

[PATCH v3 05/12] clk: samsung: exynosautov9: add cmu_peris clock support

[Chanho Park]

CMU_PERIS is responsible to control clocks of BLK_PERIS which has
OPT/MCT/WDT and TMU. This patch only supports WDT gate clocks and all
other clocks except WDT will be supported later.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 drivers/clk/samsung/clk-exynosautov9.c | 51 ++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynosautov9.c b/drivers/clk/samsung/clk-exynosautov9.c
index 984ecba83e42..b3ea586c0d21 100644
--- a/drivers/clk/samsung/clk-exynosautov9.c
+++ b/drivers/clk/samsung/clk-exynosautov9.c
@@ -1015,6 +1015,53 @@ static const struct samsung_cmu_info core_cmu_info __initconst = {
 	.clk_name		= "dout_clkcmu_core_bus",
 };
 
+/* ---- CMU_PERIS ---------------------------------------------------------- */
+
+/* Register Offset definitions for CMU_PERIS (0x10020000) */
+#define PLL_CON0_MUX_CLKCMU_PERIS_BUS_USER	0x0600
+#define CLK_CON_GAT_GOUT_BLK_PERIS_UID_SYSREG_PERIS_IPCLKPORT_PCLK	0x2058
+#define CLK_CON_GAT_GOUT_BLK_PERIS_UID_WDT_CLUSTER0_IPCLKPORT_PCLK	0x205c
+#define CLK_CON_GAT_GOUT_BLK_PERIS_UID_WDT_CLUSTER1_IPCLKPORT_PCLK	0x2060
+
+static const unsigned long peris_clk_regs[] __initconst = {
+	PLL_CON0_MUX_CLKCMU_PERIS_BUS_USER,
+	CLK_CON_GAT_GOUT_BLK_PERIS_UID_SYSREG_PERIS_IPCLKPORT_PCLK,
+	CLK_CON_GAT_GOUT_BLK_PERIS_UID_WDT_CLUSTER0_IPCLKPORT_PCLK,
+	CLK_CON_GAT_GOUT_BLK_PERIS_UID_WDT_CLUSTER1_IPCLKPORT_PCLK,
+};
+
+/* List of parent clocks for Muxes in CMU_PERIS */
+PNAME(mout_peris_bus_user_p) = { "oscclk", "dout_clkcmu_peris_bus" };
+
+static const struct samsung_mux_clock peris_mux_clks[] __initconst = {
+	MUX(CLK_MOUT_PERIS_BUS_USER, "mout_peris_bus_user",
+	    mout_peris_bus_user_p, PLL_CON0_MUX_CLKCMU_PERIS_BUS_USER, 4, 1),
+};
+
+static const struct samsung_gate_clock peris_gate_clks[] __initconst = {
+	GATE(CLK_GOUT_SYSREG_PERIS_PCLK, "gout_sysreg_peris_pclk",
+	     "mout_peris_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIS_UID_SYSREG_PERIS_IPCLKPORT_PCLK,
+	     21, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_GOUT_WDT_CLUSTER0, "gout_wdt_cluster0", "mout_peris_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIS_UID_WDT_CLUSTER0_IPCLKPORT_PCLK,
+	     21, 0, 0),
+	GATE(CLK_GOUT_WDT_CLUSTER1, "gout_wdt_cluster1", "mout_peris_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIS_UID_WDT_CLUSTER1_IPCLKPORT_PCLK,
+	     21, 0, 0),
+};
+
+static const struct samsung_cmu_info peris_cmu_info __initconst = {
+	.mux_clks		= peris_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(peris_mux_clks),
+	.gate_clks		= peris_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(peris_gate_clks),
+	.nr_clk_ids		= PERIS_NR_CLK,
+	.clk_regs		= peris_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(peris_clk_regs),
+	.clk_name		= "dout_clkcmu_peris_bus",
+};
+
 static int __init exynosautov9_cmu_probe(struct platform_device *pdev)
 {
 	const struct samsung_cmu_info *info;
@@ -1031,6 +1078,10 @@ static const struct of_device_id exynosautov9_cmu_of_match[] = {
 		.compatible = "samsung,exynosautov9-cmu-core",
 		.data = &core_cmu_info,
 	}, {
+	}, {
+		.compatible = "samsung,exynosautov9-cmu-peris",
+		.data = &peris_cmu_info,
+	}, {
 	},
 };
 
-- 
2.36.0

Re: [PATCH v3 05/12] clk: samsung: exynosautov9: add cmu_peris clock support

[Chanwoo Choi]

Hi Chanho Park,

On 22. 5. 4. 16:51, Chanho Park wrote:
> CMU_PERIS is responsible to control clocks of BLK_PERIS which has
> OPT/MCT/WDT and TMU. This patch only supports WDT gate clocks and all
> other clocks except WDT will be supported later.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>   drivers/clk/samsung/clk-exynosautov9.c | 51 ++++++++++++++++++++++++++
>   1 file changed, 51 insertions(+)
> 

(snip)

Look good to me for all patches. But, some v3 patches has
not yet arrived into my mail box. So that I checked
the patches on lore.kernel.org[1].

[1] 
https://lore.kernel.org/linux-clk/20220504075154.58819-1-chanho61.park@samsung.com/

Thanks for your work for latest Exynos SoC.

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

[PATCH v3 06/12] clk: samsung: exynosautov9: add cmu_busmc clock support

[Chanho Park]

CMU_BUSMC is responsible to control clocks of BLK_BUSMC which represents
Data/Peri buses. Most clocks except PDMA/SPDMA are not necessary to
be controlled by HLOS. So, this adds PDMA/SPDMA gate clocks.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 drivers/clk/samsung/clk-exynosautov9.c | 55 ++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynosautov9.c b/drivers/clk/samsung/clk-exynosautov9.c
index b3ea586c0d21..aaa78b921fde 100644
--- a/drivers/clk/samsung/clk-exynosautov9.c
+++ b/drivers/clk/samsung/clk-exynosautov9.c
@@ -957,6 +957,58 @@ static void __init exynosautov9_cmu_top_init(struct device_node *np)
 CLK_OF_DECLARE(exynosautov9_cmu_top, "samsung,exynosautov9-cmu-top",
 	       exynosautov9_cmu_top_init);
 
+/* ---- CMU_BUSMC ---------------------------------------------------------- */
+
+/* Register Offset definitions for CMU_BUSMC (0x1b200000) */
+#define PLL_CON0_MUX_CLKCMU_BUSMC_BUS_USER				0x0600
+#define CLK_CON_DIV_DIV_CLK_BUSMC_BUSP					0x1800
+#define CLK_CON_GAT_GOUT_BLK_BUSMC_UID_QE_PDMA0_IPCLKPORT_PCLK		0x2078
+#define CLK_CON_GAT_GOUT_BLK_BUSMC_UID_QE_SPDMA_IPCLKPORT_PCLK		0x2080
+
+static const unsigned long busmc_clk_regs[] __initconst = {
+	PLL_CON0_MUX_CLKCMU_BUSMC_BUS_USER,
+	CLK_CON_DIV_DIV_CLK_BUSMC_BUSP,
+	CLK_CON_GAT_GOUT_BLK_BUSMC_UID_QE_PDMA0_IPCLKPORT_PCLK,
+	CLK_CON_GAT_GOUT_BLK_BUSMC_UID_QE_SPDMA_IPCLKPORT_PCLK,
+};
+
+/* List of parent clocks for Muxes in CMU_BUSMC */
+PNAME(mout_busmc_bus_user_p) = { "oscclk", "dout_clkcmu_busmc_bus" };
+
+static const struct samsung_mux_clock busmc_mux_clks[] __initconst = {
+	MUX(CLK_MOUT_BUSMC_BUS_USER, "mout_busmc_bus_user",
+	    mout_busmc_bus_user_p, PLL_CON0_MUX_CLKCMU_BUSMC_BUS_USER, 4, 1),
+};
+
+static const struct samsung_div_clock busmc_div_clks[] __initconst = {
+	DIV(CLK_DOUT_BUSMC_BUSP, "dout_busmc_busp", "mout_busmc_bus_user",
+	    CLK_CON_DIV_DIV_CLK_BUSMC_BUSP, 0, 3),
+};
+
+static const struct samsung_gate_clock busmc_gate_clks[] __initconst = {
+	GATE(CLK_GOUT_BUSMC_PDMA0_PCLK, "gout_busmc_pdma0_pclk",
+	     "dout_busmc_busp",
+	     CLK_CON_GAT_GOUT_BLK_BUSMC_UID_QE_PDMA0_IPCLKPORT_PCLK, 21,
+	     0, 0),
+	GATE(CLK_GOUT_BUSMC_SPDMA_PCLK, "gout_busmc_spdma_pclk",
+	     "dout_busmc_busp",
+	     CLK_CON_GAT_GOUT_BLK_BUSMC_UID_QE_SPDMA_IPCLKPORT_PCLK, 21,
+	     0, 0),
+};
+
+static const struct samsung_cmu_info busmc_cmu_info __initconst = {
+	.mux_clks		= busmc_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(busmc_mux_clks),
+	.div_clks		= busmc_div_clks,
+	.nr_div_clks		= ARRAY_SIZE(busmc_div_clks),
+	.gate_clks		= busmc_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(busmc_gate_clks),
+	.nr_clk_ids		= BUSMC_NR_CLK,
+	.clk_regs		= busmc_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(busmc_clk_regs),
+	.clk_name		= "dout_clkcmu_busmc_bus",
+};
+
 /* ---- CMU_CORE ----------------------------------------------------------- */
 
 /* Register Offset definitions for CMU_CORE (0x1b030000) */
@@ -1075,6 +1127,9 @@ static int __init exynosautov9_cmu_probe(struct platform_device *pdev)
 
 static const struct of_device_id exynosautov9_cmu_of_match[] = {
 	{
+		.compatible = "samsung,exynosautov9-cmu-busmc",
+		.data = &busmc_cmu_info,
+	}, {
 		.compatible = "samsung,exynosautov9-cmu-core",
 		.data = &core_cmu_info,
 	}, {
-- 
2.36.0

Re: [PATCH v3 06/12] clk: samsung: exynosautov9: add cmu_busmc clock support

[Chanwoo Choi]

Hi Chanho,

On 22. 5. 4. 16:51, Chanho Park wrote:
> CMU_BUSMC is responsible to control clocks of BLK_BUSMC which represents
> Data/Peri buses. Most clocks except PDMA/SPDMA are not necessary to
> be controlled by HLOS. So, this adds PDMA/SPDMA gate clocks.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>   drivers/clk/samsung/clk-exynosautov9.c | 55 ++++++++++++++++++++++++++
>   1 file changed, 55 insertions(+)
> 

(snip)


Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

[PATCH v3 07/12] clk: samsung: exynosautov9: add cmu_fsys2 clock support

[Chanho Park]

CMU_FSYS2 is responsible to control clocks of BLK_FSYS2 which includes
ufs and ethernet IPs. This patch adds some essential clocks to be
controlled by ethernet/ufs drivers instead of listing full clocks.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 drivers/clk/samsung/clk-exynosautov9.c | 69 ++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynosautov9.c b/drivers/clk/samsung/clk-exynosautov9.c
index aaa78b921fde..8c6ecd3f3eeb 100644
--- a/drivers/clk/samsung/clk-exynosautov9.c
+++ b/drivers/clk/samsung/clk-exynosautov9.c
@@ -1067,6 +1067,73 @@ static const struct samsung_cmu_info core_cmu_info __initconst = {
 	.clk_name		= "dout_clkcmu_core_bus",
 };
 
+/* ---- CMU_FSYS2 ---------------------------------------------------------- */
+
+/* Register Offset definitions for CMU_FSYS2 (0x17c00000) */
+#define PLL_CON0_MUX_CLKCMU_FSYS2_BUS_USER	0x0600
+#define PLL_CON0_MUX_CLKCMU_FSYS2_UFS_EMBD_USER	0x0620
+#define PLL_CON0_MUX_CLKCMU_FSYS2_ETHERNET_USER	0x0610
+#define CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_ACLK	0x2098
+#define CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_CLK_UNIPRO	0x209c
+#define CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_ACLK	0x20a4
+#define CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_CLK_UNIPRO	0x20a8
+
+static const unsigned long fsys2_clk_regs[] __initconst = {
+	PLL_CON0_MUX_CLKCMU_FSYS2_BUS_USER,
+	PLL_CON0_MUX_CLKCMU_FSYS2_UFS_EMBD_USER,
+	PLL_CON0_MUX_CLKCMU_FSYS2_ETHERNET_USER,
+	CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_ACLK,
+	CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_CLK_UNIPRO,
+	CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_ACLK,
+	CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_CLK_UNIPRO,
+};
+
+/* List of parent clocks for Muxes in CMU_FSYS2 */
+PNAME(mout_fsys2_bus_user_p) = { "oscclk", "dout_clkcmu_fsys2_bus" };
+PNAME(mout_fsys2_ufs_embd_user_p) = { "oscclk", "dout_clkcmu_fsys2_ufs_embd" };
+PNAME(mout_fsys2_ethernet_user_p) = { "oscclk", "dout_clkcmu_fsys2_ethernet" };
+
+static const struct samsung_mux_clock fsys2_mux_clks[] __initconst = {
+	MUX(CLK_MOUT_FSYS2_BUS_USER, "mout_fsys2_bus_user",
+	    mout_fsys2_bus_user_p, PLL_CON0_MUX_CLKCMU_FSYS2_BUS_USER, 4, 1),
+	MUX(CLK_MOUT_FSYS2_UFS_EMBD_USER, "mout_fsys2_ufs_embd_user",
+	    mout_fsys2_ufs_embd_user_p,
+	    PLL_CON0_MUX_CLKCMU_FSYS2_UFS_EMBD_USER, 4, 1),
+	MUX(CLK_MOUT_FSYS2_ETHERNET_USER, "mout_fsys2_ethernet_user",
+	    mout_fsys2_ethernet_user_p,
+	    PLL_CON0_MUX_CLKCMU_FSYS2_ETHERNET_USER, 4, 1),
+};
+
+static const struct samsung_gate_clock fsys2_gate_clks[] __initconst = {
+	GATE(CLK_GOUT_FSYS2_UFS_EMBD0_ACLK, "gout_fsys2_ufs_embd0_aclk",
+	     "mout_fsys2_ufs_embd_user",
+	     CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_ACLK, 21,
+	     0, 0),
+	GATE(CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO, "gout_fsys2_ufs_embd0_unipro",
+	     "mout_fsys2_ufs_embd_user",
+	     CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_CLK_UNIPRO,
+	     21, 0, 0),
+	GATE(CLK_GOUT_FSYS2_UFS_EMBD1_ACLK, "gout_fsys2_ufs_embd1_aclk",
+	     "mout_fsys2_ufs_embd_user",
+	     CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_ACLK, 21,
+	     0, 0),
+	GATE(CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO, "gout_fsys2_ufs_embd1_unipro",
+	     "mout_fsys2_ufs_embd_user",
+	     CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_CLK_UNIPRO,
+	     21, 0, 0),
+};
+
+static const struct samsung_cmu_info fsys2_cmu_info __initconst = {
+	.mux_clks		= fsys2_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(fsys2_mux_clks),
+	.gate_clks		= fsys2_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(fsys2_gate_clks),
+	.nr_clk_ids		= FSYS2_NR_CLK,
+	.clk_regs		= fsys2_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(fsys2_clk_regs),
+	.clk_name		= "dout_clkcmu_fsys2_bus",
+};
+
 /* ---- CMU_PERIS ---------------------------------------------------------- */
 
 /* Register Offset definitions for CMU_PERIS (0x10020000) */
@@ -1133,6 +1200,8 @@ static const struct of_device_id exynosautov9_cmu_of_match[] = {
 		.compatible = "samsung,exynosautov9-cmu-core",
 		.data = &core_cmu_info,
 	}, {
+		.compatible = "samsung,exynosautov9-cmu-fsys2",
+		.data = &fsys2_cmu_info,
 	}, {
 		.compatible = "samsung,exynosautov9-cmu-peris",
 		.data = &peris_cmu_info,
-- 
2.36.0

Re: [PATCH v3 07/12] clk: samsung: exynosautov9: add cmu_fsys2 clock support

[Chanwoo Choi]

On 22. 5. 4. 16:51, Chanho Park wrote:
> CMU_FSYS2 is responsible to control clocks of BLK_FSYS2 which includes
> ufs and ethernet IPs. This patch adds some essential clocks to be
> controlled by ethernet/ufs drivers instead of listing full clocks.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>   drivers/clk/samsung/clk-exynosautov9.c | 69 ++++++++++++++++++++++++++
>   1 file changed, 69 insertions(+)
> 
> diff --git a/drivers/clk/samsung/clk-exynosautov9.c b/drivers/clk/samsung/clk-exynosautov9.c
> index aaa78b921fde..8c6ecd3f3eeb 100644
> --- a/drivers/clk/samsung/clk-exynosautov9.c
> +++ b/drivers/clk/samsung/clk-exynosautov9.c
> @@ -1067,6 +1067,73 @@ static const struct samsung_cmu_info core_cmu_info __initconst = {
>   	.clk_name		= "dout_clkcmu_core_bus",
>   };
>   
> +/* ---- CMU_FSYS2 ---------------------------------------------------------- */
> +
> +/* Register Offset definitions for CMU_FSYS2 (0x17c00000) */
> +#define PLL_CON0_MUX_CLKCMU_FSYS2_BUS_USER	0x0600
> +#define PLL_CON0_MUX_CLKCMU_FSYS2_UFS_EMBD_USER	0x0620
> +#define PLL_CON0_MUX_CLKCMU_FSYS2_ETHERNET_USER	0x0610
> +#define CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_ACLK	0x2098
> +#define CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_CLK_UNIPRO	0x209c
> +#define CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_ACLK	0x20a4
> +#define CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_CLK_UNIPRO	0x20a8
> +
> +static const unsigned long fsys2_clk_regs[] __initconst = {
> +	PLL_CON0_MUX_CLKCMU_FSYS2_BUS_USER,
> +	PLL_CON0_MUX_CLKCMU_FSYS2_UFS_EMBD_USER,
> +	PLL_CON0_MUX_CLKCMU_FSYS2_ETHERNET_USER,
> +	CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_ACLK,
> +	CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_CLK_UNIPRO,
> +	CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_ACLK,
> +	CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_CLK_UNIPRO,
> +};
> +
> +/* List of parent clocks for Muxes in CMU_FSYS2 */
> +PNAME(mout_fsys2_bus_user_p) = { "oscclk", "dout_clkcmu_fsys2_bus" };
> +PNAME(mout_fsys2_ufs_embd_user_p) = { "oscclk", "dout_clkcmu_fsys2_ufs_embd" };
> +PNAME(mout_fsys2_ethernet_user_p) = { "oscclk", "dout_clkcmu_fsys2_ethernet" };
> +
> +static const struct samsung_mux_clock fsys2_mux_clks[] __initconst = {
> +	MUX(CLK_MOUT_FSYS2_BUS_USER, "mout_fsys2_bus_user",
> +	    mout_fsys2_bus_user_p, PLL_CON0_MUX_CLKCMU_FSYS2_BUS_USER, 4, 1),
> +	MUX(CLK_MOUT_FSYS2_UFS_EMBD_USER, "mout_fsys2_ufs_embd_user",
> +	    mout_fsys2_ufs_embd_user_p,
> +	    PLL_CON0_MUX_CLKCMU_FSYS2_UFS_EMBD_USER, 4, 1),
> +	MUX(CLK_MOUT_FSYS2_ETHERNET_USER, "mout_fsys2_ethernet_user",
> +	    mout_fsys2_ethernet_user_p,
> +	    PLL_CON0_MUX_CLKCMU_FSYS2_ETHERNET_USER, 4, 1),
> +};
> +
> +static const struct samsung_gate_clock fsys2_gate_clks[] __initconst = {
> +	GATE(CLK_GOUT_FSYS2_UFS_EMBD0_ACLK, "gout_fsys2_ufs_embd0_aclk",
> +	     "mout_fsys2_ufs_embd_user",
> +	     CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_ACLK, 21,
> +	     0, 0),
> +	GATE(CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO, "gout_fsys2_ufs_embd0_unipro",
> +	     "mout_fsys2_ufs_embd_user",
> +	     CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD0_IPCLKPORT_I_CLK_UNIPRO,
> +	     21, 0, 0),
> +	GATE(CLK_GOUT_FSYS2_UFS_EMBD1_ACLK, "gout_fsys2_ufs_embd1_aclk",
> +	     "mout_fsys2_ufs_embd_user",
> +	     CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_ACLK, 21,
> +	     0, 0),
> +	GATE(CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO, "gout_fsys2_ufs_embd1_unipro",
> +	     "mout_fsys2_ufs_embd_user",
> +	     CLK_CON_GAT_GOUT_BLK_FSYS2_UID_UFS_EMBD1_IPCLKPORT_I_CLK_UNIPRO,
> +	     21, 0, 0),
> +};
> +
> +static const struct samsung_cmu_info fsys2_cmu_info __initconst = {
> +	.mux_clks		= fsys2_mux_clks,
> +	.nr_mux_clks		= ARRAY_SIZE(fsys2_mux_clks),
> +	.gate_clks		= fsys2_gate_clks,
> +	.nr_gate_clks		= ARRAY_SIZE(fsys2_gate_clks),
> +	.nr_clk_ids		= FSYS2_NR_CLK,
> +	.clk_regs		= fsys2_clk_regs,
> +	.nr_clk_regs		= ARRAY_SIZE(fsys2_clk_regs),
> +	.clk_name		= "dout_clkcmu_fsys2_bus",
> +};
> +
>   /* ---- CMU_PERIS ---------------------------------------------------------- */
>   
>   /* Register Offset definitions for CMU_PERIS (0x10020000) */
> @@ -1133,6 +1200,8 @@ static const struct of_device_id exynosautov9_cmu_of_match[] = {
>   		.compatible = "samsung,exynosautov9-cmu-core",
>   		.data = &core_cmu_info,
>   	}, {
> +		.compatible = "samsung,exynosautov9-cmu-fsys2",
> +		.data = &fsys2_cmu_info,
>   	}, {
>   		.compatible = "samsung,exynosautov9-cmu-peris",
>   		.data = &peris_cmu_info,

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

[PATCH v3 08/12] clk: samsung: exynosautov9: add cmu_peric0 clock support

[Chanho Park]

CMU_PERIC0 provides clocks for USI0 ~ USI5 and USIx_I2C. USI0/1/2/3/4/5
have its own divider but USI_I2Cs share "dout_peric0_usi_i2c" divider.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 drivers/clk/samsung/clk-exynosautov9.c | 254 +++++++++++++++++++++++++
 1 file changed, 254 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynosautov9.c b/drivers/clk/samsung/clk-exynosautov9.c
index 8c6ecd3f3eeb..e85efc6c3f71 100644
--- a/drivers/clk/samsung/clk-exynosautov9.c
+++ b/drivers/clk/samsung/clk-exynosautov9.c
@@ -1134,6 +1134,257 @@ static const struct samsung_cmu_info fsys2_cmu_info __initconst = {
 	.clk_name		= "dout_clkcmu_fsys2_bus",
 };
 
+/* ---- CMU_PERIC0 --------------------------------------------------------- */
+
+/* Register Offset definitions for CMU_PERIC0 (0x10200000) */
+#define PLL_CON0_MUX_CLKCMU_PERIC0_BUS_USER	0x0600
+#define PLL_CON0_MUX_CLKCMU_PERIC0_IP_USER	0x0610
+#define CLK_CON_MUX_MUX_CLK_PERIC0_USI00_USI	0x1000
+#define CLK_CON_MUX_MUX_CLK_PERIC0_USI01_USI	0x1004
+#define CLK_CON_MUX_MUX_CLK_PERIC0_USI02_USI	0x1008
+#define CLK_CON_MUX_MUX_CLK_PERIC0_USI03_USI	0x100c
+#define CLK_CON_MUX_MUX_CLK_PERIC0_USI04_USI	0x1010
+#define CLK_CON_MUX_MUX_CLK_PERIC0_USI05_USI	0x1014
+#define CLK_CON_MUX_MUX_CLK_PERIC0_USI_I2C	0x1018
+#define CLK_CON_DIV_DIV_CLK_PERIC0_USI00_USI	0x1800
+#define CLK_CON_DIV_DIV_CLK_PERIC0_USI01_USI	0x1804
+#define CLK_CON_DIV_DIV_CLK_PERIC0_USI02_USI	0x1808
+#define CLK_CON_DIV_DIV_CLK_PERIC0_USI03_USI	0x180c
+#define CLK_CON_DIV_DIV_CLK_PERIC0_USI04_USI	0x1810
+#define CLK_CON_DIV_DIV_CLK_PERIC0_USI05_USI	0x1814
+#define CLK_CON_DIV_DIV_CLK_PERIC0_USI_I2C	0x1818
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_0	0x2014
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_1	0x2018
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_2	0x2024
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_3	0x2028
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_4	0x202c
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_5	0x2030
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_6	0x2034
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_7	0x2038
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_8	0x203c
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_9	0x2040
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_10	0x201c
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_11	0x2020
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_0	0x2044
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_1	0x2048
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_2	0x2058
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_3	0x205c
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_4	0x2060
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_7	0x206c
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_5	0x2064
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_6	0x2068
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_8	0x2070
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_9	0x2074
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_10	0x204c
+#define CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_11	0x2050
+
+static const unsigned long peric0_clk_regs[] __initconst = {
+	PLL_CON0_MUX_CLKCMU_PERIC0_BUS_USER,
+	PLL_CON0_MUX_CLKCMU_PERIC0_IP_USER,
+	CLK_CON_MUX_MUX_CLK_PERIC0_USI00_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC0_USI01_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC0_USI02_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC0_USI03_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC0_USI04_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC0_USI05_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC0_USI_I2C,
+	CLK_CON_DIV_DIV_CLK_PERIC0_USI00_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC0_USI01_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC0_USI02_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC0_USI03_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC0_USI04_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC0_USI05_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC0_USI_I2C,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_0,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_1,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_2,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_3,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_4,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_5,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_6,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_7,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_8,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_9,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_10,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_11,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_0,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_1,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_2,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_3,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_4,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_7,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_5,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_6,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_8,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_9,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_10,
+	CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_11,
+};
+
+/* List of parent clocks for Muxes in CMU_PERIC0 */
+PNAME(mout_peric0_bus_user_p) = { "oscclk", "dout_clkcmu_peric0_bus" };
+PNAME(mout_peric0_ip_user_p) = { "oscclk", "dout_clkcmu_peric0_ip" };
+PNAME(mout_peric0_usi_p) = { "oscclk", "mout_peric0_ip_user" };
+
+static const struct samsung_mux_clock peric0_mux_clks[] __initconst = {
+	MUX(CLK_MOUT_PERIC0_BUS_USER, "mout_peric0_bus_user",
+	    mout_peric0_bus_user_p, PLL_CON0_MUX_CLKCMU_PERIC0_BUS_USER, 4, 1),
+	MUX(CLK_MOUT_PERIC0_IP_USER, "mout_peric0_ip_user",
+	    mout_peric0_ip_user_p, PLL_CON0_MUX_CLKCMU_PERIC0_IP_USER, 4, 1),
+	/* USI00 ~ USI05 */
+	MUX(CLK_MOUT_PERIC0_USI00_USI, "mout_peric0_usi00_usi",
+	    mout_peric0_usi_p, CLK_CON_MUX_MUX_CLK_PERIC0_USI00_USI, 0, 1),
+	MUX(CLK_MOUT_PERIC0_USI01_USI, "mout_peric0_usi01_usi",
+	    mout_peric0_usi_p, CLK_CON_MUX_MUX_CLK_PERIC0_USI01_USI, 0, 1),
+	MUX(CLK_MOUT_PERIC0_USI02_USI, "mout_peric0_usi02_usi",
+	    mout_peric0_usi_p, CLK_CON_MUX_MUX_CLK_PERIC0_USI02_USI, 0, 1),
+	MUX(CLK_MOUT_PERIC0_USI03_USI, "mout_peric0_usi03_usi",
+	    mout_peric0_usi_p, CLK_CON_MUX_MUX_CLK_PERIC0_USI03_USI, 0, 1),
+	MUX(CLK_MOUT_PERIC0_USI04_USI, "mout_peric0_usi04_usi",
+	    mout_peric0_usi_p, CLK_CON_MUX_MUX_CLK_PERIC0_USI04_USI, 0, 1),
+	MUX(CLK_MOUT_PERIC0_USI05_USI, "mout_peric0_usi05_usi",
+	    mout_peric0_usi_p, CLK_CON_MUX_MUX_CLK_PERIC0_USI05_USI, 0, 1),
+	/* USI_I2C */
+	MUX(CLK_MOUT_PERIC0_USI_I2C, "mout_peric0_usi_i2c",
+	    mout_peric0_usi_p, CLK_CON_MUX_MUX_CLK_PERIC0_USI_I2C, 0, 1),
+};
+
+static const struct samsung_div_clock peric0_div_clks[] __initconst = {
+	/* USI00 ~ USI05 */
+	DIV(CLK_DOUT_PERIC0_USI00_USI, "dout_peric0_usi00_usi",
+	    "mout_peric0_usi00_usi", CLK_CON_DIV_DIV_CLK_PERIC0_USI00_USI,
+	    0, 4),
+	DIV(CLK_DOUT_PERIC0_USI01_USI, "dout_peric0_usi01_usi",
+	    "mout_peric0_usi01_usi", CLK_CON_DIV_DIV_CLK_PERIC0_USI01_USI,
+	    0, 4),
+	DIV(CLK_DOUT_PERIC0_USI02_USI, "dout_peric0_usi02_usi",
+	    "mout_peric0_usi02_usi", CLK_CON_DIV_DIV_CLK_PERIC0_USI02_USI,
+	    0, 4),
+	DIV(CLK_DOUT_PERIC0_USI03_USI, "dout_peric0_usi03_usi",
+	    "mout_peric0_usi03_usi", CLK_CON_DIV_DIV_CLK_PERIC0_USI03_USI,
+	    0, 4),
+	DIV(CLK_DOUT_PERIC0_USI04_USI, "dout_peric0_usi04_usi",
+	    "mout_peric0_usi04_usi", CLK_CON_DIV_DIV_CLK_PERIC0_USI04_USI,
+	    0, 4),
+	DIV(CLK_DOUT_PERIC0_USI05_USI, "dout_peric0_usi05_usi",
+	    "mout_peric0_usi05_usi", CLK_CON_DIV_DIV_CLK_PERIC0_USI05_USI,
+	    0, 4),
+	/* USI_I2C */
+	DIV(CLK_DOUT_PERIC0_USI_I2C, "dout_peric0_usi_i2c",
+	    "mout_peric0_usi_i2c", CLK_CON_DIV_DIV_CLK_PERIC0_USI_I2C, 0, 4),
+};
+
+static const struct samsung_gate_clock peric0_gate_clks[] __initconst = {
+	/* IPCLK */
+	GATE(CLK_GOUT_PERIC0_IPCLK_0, "gout_peric0_ipclk_0",
+	     "dout_peric0_usi00_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_0,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_IPCLK_1, "gout_peric0_ipclk_1",
+	     "dout_peric0_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_1,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_IPCLK_2, "gout_peric0_ipclk_2",
+	     "dout_peric0_usi01_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_2,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_IPCLK_3, "gout_peric0_ipclk_3",
+	     "dout_peric0_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_3,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_IPCLK_4, "gout_peric0_ipclk_4",
+	     "dout_peric0_usi02_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_4,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_IPCLK_5, "gout_peric0_ipclk_5",
+	     "dout_peric0_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_5,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_IPCLK_6, "gout_peric0_ipclk_6",
+	     "dout_peric0_usi03_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_6,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_IPCLK_7, "gout_peric0_ipclk_7",
+	     "dout_peric0_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_7,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_IPCLK_8, "gout_peric0_ipclk_8",
+	     "dout_peric0_usi04_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_8,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_IPCLK_9, "gout_peric0_ipclk_9",
+	     "dout_peric0_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_9,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_IPCLK_10, "gout_peric0_ipclk_10",
+	     "dout_peric0_usi05_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_10,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_IPCLK_11, "gout_peric0_ipclk_11",
+	     "dout_peric0_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_11,
+	     21, 0, 0),
+
+	/* PCLK */
+	GATE(CLK_GOUT_PERIC0_PCLK_0, "gout_peric0_pclk_0",
+	     "mout_peric0_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_0,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_PCLK_2, "gout_peric0_pclk_2",
+	     "mout_peric0_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_2,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_PCLK_3, "gout_peric0_pclk_3",
+	     "mout_peric0_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_3,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_PCLK_4, "gout_peric0_pclk_4",
+	     "mout_peric0_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_4,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_PCLK_5, "gout_peric0_pclk_5",
+	     "mout_peric0_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_5,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_PCLK_6, "gout_peric0_pclk_6",
+	     "mout_peric0_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_6,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_PCLK_7, "gout_peric0_pclk_7",
+	     "mout_peric0_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_7,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_PCLK_8, "gout_peric0_pclk_8",
+	     "mout_peric0_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_8,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_PCLK_9, "gout_peric0_pclk_9",
+	     "mout_peric0_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_9,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_PCLK_10, "gout_peric0_pclk_10",
+	     "mout_peric0_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_10,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC0_PCLK_11, "gout_peric0_pclk_11",
+	     "mout_peric0_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_11,
+	     21, 0, 0),
+};
+
+static const struct samsung_cmu_info peric0_cmu_info __initconst = {
+	.mux_clks		= peric0_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(peric0_mux_clks),
+	.div_clks		= peric0_div_clks,
+	.nr_div_clks		= ARRAY_SIZE(peric0_div_clks),
+	.gate_clks		= peric0_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(peric0_gate_clks),
+	.nr_clk_ids		= PERIC0_NR_CLK,
+	.clk_regs		= peric0_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(peric0_clk_regs),
+	.clk_name		= "dout_clkcmu_peric0_bus",
+};
+
 /* ---- CMU_PERIS ---------------------------------------------------------- */
 
 /* Register Offset definitions for CMU_PERIS (0x10020000) */
@@ -1202,6 +1453,9 @@ static const struct of_device_id exynosautov9_cmu_of_match[] = {
 	}, {
 		.compatible = "samsung,exynosautov9-cmu-fsys2",
 		.data = &fsys2_cmu_info,
+	}, {
+		.compatible = "samsung,exynosautov9-cmu-peric0",
+		.data = &peric0_cmu_info,
 	}, {
 		.compatible = "samsung,exynosautov9-cmu-peris",
 		.data = &peris_cmu_info,
-- 
2.36.0

[PATCH v3 09/12] clk: samsung: exynosautov9: add cmu_peric1 clock support

[Chanho Park]

Like CMU_PERIC0, this provides clocks for USI06 ~ USI11 and USI_I2C.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 drivers/clk/samsung/clk-exynosautov9.c | 254 +++++++++++++++++++++++++
 1 file changed, 254 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynosautov9.c b/drivers/clk/samsung/clk-exynosautov9.c
index e85efc6c3f71..d9e1f8e4a7b4 100644
--- a/drivers/clk/samsung/clk-exynosautov9.c
+++ b/drivers/clk/samsung/clk-exynosautov9.c
@@ -1385,6 +1385,257 @@ static const struct samsung_cmu_info peric0_cmu_info __initconst = {
 	.clk_name		= "dout_clkcmu_peric0_bus",
 };
 
+/* ---- CMU_PERIC1 --------------------------------------------------------- */
+
+/* Register Offset definitions for CMU_PERIC1 (0x10800000) */
+#define PLL_CON0_MUX_CLKCMU_PERIC1_BUS_USER	0x0600
+#define PLL_CON0_MUX_CLKCMU_PERIC1_IP_USER	0x0610
+#define CLK_CON_MUX_MUX_CLK_PERIC1_USI06_USI	0x1000
+#define CLK_CON_MUX_MUX_CLK_PERIC1_USI07_USI	0x1004
+#define CLK_CON_MUX_MUX_CLK_PERIC1_USI08_USI	0x1008
+#define CLK_CON_MUX_MUX_CLK_PERIC1_USI09_USI	0x100c
+#define CLK_CON_MUX_MUX_CLK_PERIC1_USI10_USI	0x1010
+#define CLK_CON_MUX_MUX_CLK_PERIC1_USI11_USI	0x1014
+#define CLK_CON_MUX_MUX_CLK_PERIC1_USI_I2C	0x1018
+#define CLK_CON_DIV_DIV_CLK_PERIC1_USI06_USI	0x1800
+#define CLK_CON_DIV_DIV_CLK_PERIC1_USI07_USI	0x1804
+#define CLK_CON_DIV_DIV_CLK_PERIC1_USI08_USI	0x1808
+#define CLK_CON_DIV_DIV_CLK_PERIC1_USI09_USI	0x180c
+#define CLK_CON_DIV_DIV_CLK_PERIC1_USI10_USI	0x1810
+#define CLK_CON_DIV_DIV_CLK_PERIC1_USI11_USI	0x1814
+#define CLK_CON_DIV_DIV_CLK_PERIC1_USI_I2C	0x1818
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_0	0x2014
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_1	0x2018
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_2	0x2024
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_3	0x2028
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_4	0x202c
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_5	0x2030
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_6	0x2034
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_7	0x2038
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_8	0x203c
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_9	0x2040
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_10	0x201c
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_11	0x2020
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_0	0x2044
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_1	0x2048
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_2	0x2058
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_3	0x205c
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_4	0x2060
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_7	0x206c
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_5	0x2064
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_6	0x2068
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_8	0x2070
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_9	0x2074
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_10	0x204c
+#define CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_11	0x2050
+
+static const unsigned long peric1_clk_regs[] __initconst = {
+	PLL_CON0_MUX_CLKCMU_PERIC1_BUS_USER,
+	PLL_CON0_MUX_CLKCMU_PERIC1_IP_USER,
+	CLK_CON_MUX_MUX_CLK_PERIC1_USI06_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC1_USI07_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC1_USI08_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC1_USI09_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC1_USI10_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC1_USI11_USI,
+	CLK_CON_MUX_MUX_CLK_PERIC1_USI_I2C,
+	CLK_CON_DIV_DIV_CLK_PERIC1_USI06_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC1_USI07_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC1_USI08_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC1_USI09_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC1_USI10_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC1_USI11_USI,
+	CLK_CON_DIV_DIV_CLK_PERIC1_USI_I2C,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_0,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_1,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_2,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_3,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_4,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_5,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_6,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_7,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_8,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_9,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_10,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_11,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_0,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_1,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_2,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_3,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_4,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_7,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_5,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_6,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_8,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_9,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_10,
+	CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_11,
+};
+
+/* List of parent clocks for Muxes in CMU_PERIC1 */
+PNAME(mout_peric1_bus_user_p) = { "oscclk", "dout_clkcmu_peric1_bus" };
+PNAME(mout_peric1_ip_user_p) = { "oscclk", "dout_clkcmu_peric1_ip" };
+PNAME(mout_peric1_usi_p) = { "oscclk", "mout_peric1_ip_user" };
+
+static const struct samsung_mux_clock peric1_mux_clks[] __initconst = {
+	MUX(CLK_MOUT_PERIC1_BUS_USER, "mout_peric1_bus_user",
+	    mout_peric1_bus_user_p, PLL_CON0_MUX_CLKCMU_PERIC1_BUS_USER, 4, 1),
+	MUX(CLK_MOUT_PERIC1_IP_USER, "mout_peric1_ip_user",
+	    mout_peric1_ip_user_p, PLL_CON0_MUX_CLKCMU_PERIC1_IP_USER, 4, 1),
+	/* USI06 ~ USI11 */
+	MUX(CLK_MOUT_PERIC1_USI06_USI, "mout_peric1_usi06_usi",
+	    mout_peric1_usi_p, CLK_CON_MUX_MUX_CLK_PERIC1_USI06_USI, 0, 1),
+	MUX(CLK_MOUT_PERIC1_USI07_USI, "mout_peric1_usi07_usi",
+	    mout_peric1_usi_p, CLK_CON_MUX_MUX_CLK_PERIC1_USI07_USI, 0, 1),
+	MUX(CLK_MOUT_PERIC1_USI08_USI, "mout_peric1_usi08_usi",
+	    mout_peric1_usi_p, CLK_CON_MUX_MUX_CLK_PERIC1_USI08_USI, 0, 1),
+	MUX(CLK_MOUT_PERIC1_USI09_USI, "mout_peric1_usi09_usi",
+	    mout_peric1_usi_p, CLK_CON_MUX_MUX_CLK_PERIC1_USI09_USI, 0, 1),
+	MUX(CLK_MOUT_PERIC1_USI10_USI, "mout_peric1_usi10_usi",
+	    mout_peric1_usi_p, CLK_CON_MUX_MUX_CLK_PERIC1_USI10_USI, 0, 1),
+	MUX(CLK_MOUT_PERIC1_USI11_USI, "mout_peric1_usi11_usi",
+	    mout_peric1_usi_p, CLK_CON_MUX_MUX_CLK_PERIC1_USI11_USI, 0, 1),
+	/* USI_I2C */
+	MUX(CLK_MOUT_PERIC1_USI_I2C, "mout_peric1_usi_i2c",
+	    mout_peric1_usi_p, CLK_CON_MUX_MUX_CLK_PERIC1_USI_I2C, 0, 1),
+};
+
+static const struct samsung_div_clock peric1_div_clks[] __initconst = {
+	/* USI06 ~ USI11 */
+	DIV(CLK_DOUT_PERIC1_USI06_USI, "dout_peric1_usi06_usi",
+	    "mout_peric1_usi06_usi", CLK_CON_DIV_DIV_CLK_PERIC1_USI06_USI,
+	    0, 4),
+	DIV(CLK_DOUT_PERIC1_USI07_USI, "dout_peric1_usi07_usi",
+	    "mout_peric1_usi07_usi", CLK_CON_DIV_DIV_CLK_PERIC1_USI07_USI,
+	    0, 4),
+	DIV(CLK_DOUT_PERIC1_USI08_USI, "dout_peric1_usi08_usi",
+	    "mout_peric1_usi08_usi", CLK_CON_DIV_DIV_CLK_PERIC1_USI08_USI,
+	    0, 4),
+	DIV(CLK_DOUT_PERIC1_USI09_USI, "dout_peric1_usi09_usi",
+	    "mout_peric1_usi09_usi", CLK_CON_DIV_DIV_CLK_PERIC1_USI09_USI,
+	    0, 4),
+	DIV(CLK_DOUT_PERIC1_USI10_USI, "dout_peric1_usi10_usi",
+	    "mout_peric1_usi10_usi", CLK_CON_DIV_DIV_CLK_PERIC1_USI10_USI,
+	    0, 4),
+	DIV(CLK_DOUT_PERIC1_USI11_USI, "dout_peric1_usi11_usi",
+	    "mout_peric1_usi11_usi", CLK_CON_DIV_DIV_CLK_PERIC1_USI11_USI,
+	    0, 4),
+	/* USI_I2C */
+	DIV(CLK_DOUT_PERIC1_USI_I2C, "dout_peric1_usi_i2c",
+	    "mout_peric1_usi_i2c", CLK_CON_DIV_DIV_CLK_PERIC1_USI_I2C, 0, 4),
+};
+
+static const struct samsung_gate_clock peric1_gate_clks[] __initconst = {
+	/* IPCLK */
+	GATE(CLK_GOUT_PERIC1_IPCLK_0, "gout_peric1_ipclk_0",
+	     "dout_peric1_usi06_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_0,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_IPCLK_1, "gout_peric1_ipclk_1",
+	     "dout_peric1_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_1,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_IPCLK_2, "gout_peric1_ipclk_2",
+	     "dout_peric1_usi07_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_2,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_IPCLK_3, "gout_peric1_ipclk_3",
+	     "dout_peric1_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_3,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_IPCLK_4, "gout_peric1_ipclk_4",
+	     "dout_peric1_usi08_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_4,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_IPCLK_5, "gout_peric1_ipclk_5",
+	     "dout_peric1_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_5,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_IPCLK_6, "gout_peric1_ipclk_6",
+	     "dout_peric1_usi09_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_6,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_IPCLK_7, "gout_peric1_ipclk_7",
+	     "dout_peric1_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_7,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_IPCLK_8, "gout_peric1_ipclk_8",
+	     "dout_peric1_usi10_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_8,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_IPCLK_9, "gout_peric1_ipclk_9",
+	     "dout_peric1_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_9,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_IPCLK_10, "gout_peric1_ipclk_10",
+	     "dout_peric1_usi11_usi",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_10,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_IPCLK_11, "gout_peric1_ipclk_11",
+	     "dout_peric1_usi_i2c",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_11,
+	     21, 0, 0),
+
+	/* PCLK */
+	GATE(CLK_GOUT_PERIC1_PCLK_0, "gout_peric1_pclk_0",
+	     "mout_peric1_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_0,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_PCLK_2, "gout_peric1_pclk_2",
+	     "mout_peric1_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_2,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_PCLK_3, "gout_peric1_pclk_3",
+	     "mout_peric1_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_3,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_PCLK_4, "gout_peric1_pclk_4",
+	     "mout_peric1_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_4,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_PCLK_5, "gout_peric1_pclk_5",
+	     "mout_peric1_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_5,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_PCLK_6, "gout_peric1_pclk_6",
+	     "mout_peric1_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_6,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_PCLK_7, "gout_peric1_pclk_7",
+	     "mout_peric1_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_7,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_PCLK_8, "gout_peric1_pclk_8",
+	     "mout_peric1_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_8,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_PCLK_9, "gout_peric1_pclk_9",
+	     "mout_peric1_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_9,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_PCLK_10, "gout_peric1_pclk_10",
+	     "mout_peric1_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_10,
+	     21, 0, 0),
+	GATE(CLK_GOUT_PERIC1_PCLK_11, "gout_peric1_pclk_11",
+	     "mout_peric1_bus_user",
+	     CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_PCLK_11,
+	     21, 0, 0),
+};
+
+static const struct samsung_cmu_info peric1_cmu_info __initconst = {
+	.mux_clks		= peric1_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(peric1_mux_clks),
+	.div_clks		= peric1_div_clks,
+	.nr_div_clks		= ARRAY_SIZE(peric1_div_clks),
+	.gate_clks		= peric1_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(peric1_gate_clks),
+	.nr_clk_ids		= PERIC1_NR_CLK,
+	.clk_regs		= peric1_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(peric1_clk_regs),
+	.clk_name		= "dout_clkcmu_peric1_bus",
+};
+
 /* ---- CMU_PERIS ---------------------------------------------------------- */
 
 /* Register Offset definitions for CMU_PERIS (0x10020000) */
@@ -1456,6 +1707,9 @@ static const struct of_device_id exynosautov9_cmu_of_match[] = {
 	}, {
 		.compatible = "samsung,exynosautov9-cmu-peric0",
 		.data = &peric0_cmu_info,
+	}, {
+		.compatible = "samsung,exynosautov9-cmu-peric1",
+		.data = &peric1_cmu_info,
 	}, {
 		.compatible = "samsung,exynosautov9-cmu-peris",
 		.data = &peris_cmu_info,
-- 
2.36.0

Re: [PATCH v3 09/12] clk: samsung: exynosautov9: add cmu_peric1 clock support

[Chanwoo Choi]

On 22. 5. 4. 16:51, Chanho Park wrote:
> Like CMU_PERIC0, this provides clocks for USI06 ~ USI11 and USI_I2C.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>   drivers/clk/samsung/clk-exynosautov9.c | 254 +++++++++++++++++++++++++
>   1 file changed, 254 insertions(+)
> 

(snip)

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

[PATCH v3 10/12] arm64: dts: exynosautov9: add initial cmu clock nodes

[Chanho Park]

Add cmu_top, cmu_busmc, cmu_core, cmu_fsys and peric0/c1/s clock nodes.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 84 ++++++++++++++++++++
 1 file changed, 84 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index 807d500d6022..c9cd3774f298 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -6,6 +6,7 @@
  *
  */
 
+#include <dt-bindings/clock/samsung,exynosautov9.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/soc/samsung,exynos-usi.h>
 
@@ -190,6 +191,89 @@ chipid@10000000 {
 			reg = <0x10000000 0x24>;
 		};
 
+		cmu_peris: clock-controller@10020000 {
+			compatible = "samsung,exynosautov9-cmu-peris";
+			reg = <0x10020000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIS_BUS>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_peris_bus";
+		};
+
+		cmu_peric0: clock-controller@10200000 {
+			compatible = "samsung,exynosautov9-cmu-peric0";
+			reg = <0x10200000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIC0_BUS>,
+				 <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_peric0_bus",
+				      "dout_clkcmu_peric0_ip";
+		};
+
+		cmu_peric1: clock-controller@10800000 {
+			compatible = "samsung,exynosautov9-cmu-peric1";
+			reg = <0x10800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIC1_BUS>,
+				 <&cmu_top DOUT_CLKCMU_PERIC1_IP>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_peric1_bus",
+				      "dout_clkcmu_peric1_ip";
+		};
+
+		cmu_fsys2: clock-controller@17c00000 {
+			compatible = "samsung,exynosautov9-cmu-fsys2";
+			reg = <0x17c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+				 <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+				 <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_fsys2_bus",
+				      "dout_fsys2_clkcmu_ufs_embd",
+				      "dout_fsys2_clkcmu_ethernet";
+		};
+
+		cmu_core: clock-controller@1b030000 {
+			compatible = "samsung,exynosautov9-cmu-core";
+			reg = <0x1b030000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CORE_BUS>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_core_bus";
+		};
+
+		cmu_busmc: clock-controller@1b200000 {
+			compatible = "samsung,exynosautov9-cmu-busmc";
+			reg = <0x1b200000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_BUSMC_BUS>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_busmc_bus";
+		};
+
+		cmu_top: clock-controller@1b240000 {
+			compatible = "samsung,exynosautov9-cmu-top";
+			reg = <0x1b240000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>;
+			clock-names = "oscclk";
+		};
+
 		gic: interrupt-controller@10101000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
-- 
2.36.0

Re: [PATCH v3 10/12] arm64: dts: exynosautov9: add initial cmu clock nodes

[Chanwoo Choi]

On 22. 5. 4. 16:51, Chanho Park wrote:
> Add cmu_top, cmu_busmc, cmu_core, cmu_fsys and peric0/c1/s clock nodes.
> 
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>   arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 84 ++++++++++++++++++++
>   1 file changed, 84 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
> index 807d500d6022..c9cd3774f298 100644
> --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
> @@ -6,6 +6,7 @@
>    *
>    */
>   
> +#include <dt-bindings/clock/samsung,exynosautov9.h>
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/soc/samsung,exynos-usi.h>
>   
> @@ -190,6 +191,89 @@ chipid@10000000 {
>   			reg = <0x10000000 0x24>;
>   		};
>   
> +		cmu_peris: clock-controller@10020000 {
> +			compatible = "samsung,exynosautov9-cmu-peris";
> +			reg = <0x10020000 0x8000>;
> +			#clock-cells = <1>;
> +
> +			clocks = <&xtcxo>,
> +				 <&cmu_top DOUT_CLKCMU_PERIS_BUS>;
> +			clock-names = "oscclk",
> +				      "dout_clkcmu_peris_bus";
> +		};
> +
> +		cmu_peric0: clock-controller@10200000 {
> +			compatible = "samsung,exynosautov9-cmu-peric0";
> +			reg = <0x10200000 0x8000>;
> +			#clock-cells = <1>;
> +
> +			clocks = <&xtcxo>,
> +				 <&cmu_top DOUT_CLKCMU_PERIC0_BUS>,
> +				 <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
> +			clock-names = "oscclk",
> +				      "dout_clkcmu_peric0_bus",
> +				      "dout_clkcmu_peric0_ip";
> +		};
> +
> +		cmu_peric1: clock-controller@10800000 {
> +			compatible = "samsung,exynosautov9-cmu-peric1";
> +			reg = <0x10800000 0x8000>;
> +			#clock-cells = <1>;
> +
> +			clocks = <&xtcxo>,
> +				 <&cmu_top DOUT_CLKCMU_PERIC1_BUS>,
> +				 <&cmu_top DOUT_CLKCMU_PERIC1_IP>;
> +			clock-names = "oscclk",
> +				      "dout_clkcmu_peric1_bus",
> +				      "dout_clkcmu_peric1_ip";
> +		};
> +
> +		cmu_fsys2: clock-controller@17c00000 {
> +			compatible = "samsung,exynosautov9-cmu-fsys2";
> +			reg = <0x17c00000 0x8000>;
> +			#clock-cells = <1>;
> +
> +			clocks = <&xtcxo>,
> +				 <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
> +				 <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
> +				 <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
> +			clock-names = "oscclk",
> +				      "dout_clkcmu_fsys2_bus",
> +				      "dout_fsys2_clkcmu_ufs_embd",
> +				      "dout_fsys2_clkcmu_ethernet";
> +		};
> +
> +		cmu_core: clock-controller@1b030000 {
> +			compatible = "samsung,exynosautov9-cmu-core";
> +			reg = <0x1b030000 0x8000>;
> +			#clock-cells = <1>;
> +
> +			clocks = <&xtcxo>,
> +				 <&cmu_top DOUT_CLKCMU_CORE_BUS>;
> +			clock-names = "oscclk",
> +				      "dout_clkcmu_core_bus";
> +		};
> +
> +		cmu_busmc: clock-controller@1b200000 {
> +			compatible = "samsung,exynosautov9-cmu-busmc";
> +			reg = <0x1b200000 0x8000>;
> +			#clock-cells = <1>;
> +
> +			clocks = <&xtcxo>,
> +				 <&cmu_top DOUT_CLKCMU_BUSMC_BUS>;
> +			clock-names = "oscclk",
> +				      "dout_clkcmu_busmc_bus";
> +		};
> +
> +		cmu_top: clock-controller@1b240000 {
> +			compatible = "samsung,exynosautov9-cmu-top";
> +			reg = <0x1b240000 0x8000>;
> +			#clock-cells = <1>;
> +
> +			clocks = <&xtcxo>;
> +			clock-names = "oscclk";
> +		};
> +
>   		gic: interrupt-controller@10101000 {
>   			compatible = "arm,gic-400";
>   			#interrupt-cells = <3>;

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

Re: (subset) [PATCH v3 10/12] arm64: dts: exynosautov9: add initial cmu clock nodes

[Krzysztof Kozlowski]

On Wed, 4 May 2022 16:51:52 +0900, Chanho Park wrote:
> Add cmu_top, cmu_busmc, cmu_core, cmu_fsys and peric0/c1/s clock nodes.
> 
> 

Applied, thanks!

[10/12] arm64: dts: exynosautov9: add initial cmu clock nodes
        commit: 5394461a31c9d1c6a0452a0312f941e0b4d08d74

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[PATCH v3 11/12] arm64: dts: exynosautov9: switch usi clocks

[Chanho Park]

This changes to use cmu clock nodes instead of dummy fixed-rate-clock.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index c9cd3774f298..68335fefa5f3 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -158,17 +158,6 @@ xtcxo: clock {
 			clock-output-names = "oscclk";
 		};
 
-		/*
-		 * Keep the stub clock for serial driver, until proper clock
-		 * driver is implemented.
-		 */
-		uart_clock: uart-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <133250000>;
-			clock-output-names = "uart";
-		};
-
 		/*
 		 * Keep the stub clock for ufs driver, until proper clock
 		 * driver is implemented.
@@ -355,7 +344,8 @@ usi_0: usi@103000c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			clocks = <&uart_clock>, <&uart_clock>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
 			clock-names = "pclk", "ipclk";
 			status = "disabled";
 
@@ -366,7 +356,8 @@ serial_0: serial@10300000 {
 				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&uart0_bus_dual>;
-				clocks = <&uart_clock>, <&uart_clock>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
 				clock-names = "uart", "clk_uart_baud0";
 				status = "disabled";
 			};
-- 
2.36.0

Re: [PATCH v3 11/12] arm64: dts: exynosautov9: switch usi clocks

[Chanwoo Choi]

On 22. 5. 4. 16:51, Chanho Park wrote:
> This changes to use cmu clock nodes instead of dummy fixed-rate-clock.
> 
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>   arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 17 ++++-------------
>   1 file changed, 4 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
> index c9cd3774f298..68335fefa5f3 100644
> --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
> @@ -158,17 +158,6 @@ xtcxo: clock {
>   			clock-output-names = "oscclk";
>   		};
>   
> -		/*
> -		 * Keep the stub clock for serial driver, until proper clock
> -		 * driver is implemented.
> -		 */
> -		uart_clock: uart-clock {
> -			compatible = "fixed-clock";
> -			#clock-cells = <0>;
> -			clock-frequency = <133250000>;
> -			clock-output-names = "uart";
> -		};
> -
>   		/*
>   		 * Keep the stub clock for ufs driver, until proper clock
>   		 * driver is implemented.
> @@ -355,7 +344,8 @@ usi_0: usi@103000c0 {
>   			#address-cells = <1>;
>   			#size-cells = <1>;
>   			ranges;
> -			clocks = <&uart_clock>, <&uart_clock>;
> +			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
> +				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
>   			clock-names = "pclk", "ipclk";
>   			status = "disabled";
>   
> @@ -366,7 +356,8 @@ serial_0: serial@10300000 {
>   				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
>   				pinctrl-names = "default";
>   				pinctrl-0 = <&uart0_bus_dual>;
> -				clocks = <&uart_clock>, <&uart_clock>;
> +				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
> +					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
>   				clock-names = "uart", "clk_uart_baud0";
>   				status = "disabled";
>   			};

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

Re: (subset) [PATCH v3 11/12] arm64: dts: exynosautov9: switch usi clocks

[Krzysztof Kozlowski]

On Wed, 4 May 2022 16:51:53 +0900, Chanho Park wrote:
> This changes to use cmu clock nodes instead of dummy fixed-rate-clock.
> 
> 

Applied, thanks!

[11/12] arm64: dts: exynosautov9: switch usi clocks
        commit: 4c882968d434c9968f53fbefa3ba6e64ff33d6a0

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[PATCH v3 12/12] arm64: dts: exynosautov9: switch ufs clock node

[Chanho Park]

Use cmu_fsys's clock node instead of dummy ufs clock node.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index 68335fefa5f3..a8818b92e217 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -157,16 +157,6 @@ xtcxo: clock {
 			clock-frequency = <26000000>;
 			clock-output-names = "oscclk";
 		};
-
-		/*
-		 * Keep the stub clock for ufs driver, until proper clock
-		 * driver is implemented.
-		 */
-		ufs_core_clock: ufs-core-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <166562500>;
-		};
 	};
 
 	soc: soc@0 {
@@ -383,8 +373,8 @@ ufs_0: ufs0@17e00000 {
 				<0x17dc0000 0x2200>;  /* 3: UFS protector */
 			reg-names = "hci", "vs_hci", "unipro", "ufsp";
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ufs_core_clock>,
-				<&ufs_core_clock>;
+			clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_ACLK>,
+				 <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO>;
 			clock-names = "core_clk", "sclk_unipro_main";
 			freq-table-hz = <0 0>, <0 0>;
 			pinctrl-names = "default";
-- 
2.36.0

Re: [PATCH v3 12/12] arm64: dts: exynosautov9: switch ufs clock node

[Chanwoo Choi]

On 22. 5. 4. 16:51, Chanho Park wrote:
> Use cmu_fsys's clock node instead of dummy ufs clock node.
> 
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>   arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 14 ++------------
>   1 file changed, 2 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
> index 68335fefa5f3..a8818b92e217 100644
> --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
> @@ -157,16 +157,6 @@ xtcxo: clock {
>   			clock-frequency = <26000000>;
>   			clock-output-names = "oscclk";
>   		};
> -
> -		/*
> -		 * Keep the stub clock for ufs driver, until proper clock
> -		 * driver is implemented.
> -		 */
> -		ufs_core_clock: ufs-core-clock {
> -			compatible = "fixed-clock";
> -			#clock-cells = <0>;
> -			clock-frequency = <166562500>;
> -		};
>   	};
>   
>   	soc: soc@0 {
> @@ -383,8 +373,8 @@ ufs_0: ufs0@17e00000 {
>   				<0x17dc0000 0x2200>;  /* 3: UFS protector */
>   			reg-names = "hci", "vs_hci", "unipro", "ufsp";
>   			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&ufs_core_clock>,
> -				<&ufs_core_clock>;
> +			clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_ACLK>,
> +				 <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO>;
>   			clock-names = "core_clk", "sclk_unipro_main";
>   			freq-table-hz = <0 0>, <0 0>;
>   			pinctrl-names = "default";

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

Re: (subset) [PATCH v3 12/12] arm64: dts: exynosautov9: switch ufs clock node

[Krzysztof Kozlowski]

On Wed, 4 May 2022 16:51:54 +0900, Chanho Park wrote:
> Use cmu_fsys's clock node instead of dummy ufs clock node.
> 
> 

Applied, thanks!

[12/12] arm64: dts: exynosautov9: switch ufs clock node
        commit: 9882948322874b1ffdd559e6887397de4c903440

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: [PATCH v3 00/12] initial clock support for exynosauto v9 SoC

[Sylwester Nawrocki]

On 04.05.2022 09:51, Chanho Park wrote:
> This patchset adds initial clock driver support for Exynos Auto v9 SoC.

Thanks, I have applied patches 04...09/12.

Regards,
Sylwester