[PATCH v11 0/5] clk: add support for Airoha AN7583 clock

[PATCH v11 0/5] clk: add support for Airoha AN7583 clock

[Christian Marangi]

This small series introduce some cleanup and support for
clock and reset of Airoha AN7583.

The implementation is similar to EN7581 but AN7583 introduce
new reset and more clock divisor support.

Changes v11:
- Move to global spinlock
- Move pci ops to sleepable prepare/unprepare

Changes v10:
- Fix whitespace in include patch
- Add reset and phy cell as required
- Add additional patch for devm variant
- Add additional patch for lock for clock and reset access

Changes v9:
- Fix compilation error for priv (again) (this time fixed)

Changes v8:
- Add ACK tag by Connor
- Fix missing priv->base assign

Changes v7:
- Add further info for DT patch
- Add serdes selection support
- Rebase on top of linux-next
  Link: https://lore.kernel.org/all/20261009070725.13196-1-ansuelsmth@gmail.com/

Changes v6:
- Address bot suggestion for DT patch
- Add further information on chip-scu phandle
- Add dedicated PERSTOUT reset and PCIE_HB reset
  Link: https://lore.kernel.org/all/20260819221458.30040-1-ansuelsmth@gmail.com/

Changes v5:
- Rebase on top of linux-next
- Drop even more patch to reduce patch delta
- Make chip-scu specific to AN7583
  Link: https://lore.kernel.org/all/20260528190000.9164-1-ansuelsmth@gmail.com

Changes v4:
- Add review tag for DT patch
- Fix clock patch to use en7581-chip-scu compatible
- Drop PCIE SCU SSR write

Changes v3:
- Drop .set_rate patch (will be proposed later)
- Drop chip-scu binding and related patch
  Link: https://lore.kernel.org/all/20251106195935.1767696-1-ansuelsmth@gmail.com

Changes v2:
- Add .set_rate support
- Rework DT to EN7581 implementation (clock driver is parent)
- Add additional cleanup patch
- Merge binding with schema patch
- Add chip_scu phandle

Christian Marangi (5):
  dt-bindings: clock: airoha: Document support for AN7583 clock
  clk: en7523: use devm variant for clk_hw_register and fixed clock
  clk: en7523: protect concurrent access to reset and PCI register
  clk: en7523: generalize register clocks function
  clk: en7523: add support for Airoha AN7583 clock

 .../bindings/clock/airoha,en7523-scu.yaml     |  25 ++
 drivers/clk/clk-en7523.c                      | 352 +++++++++++++++++-
 include/dt-bindings/clock/en7523-clk.h        |   3 +
 .../dt-bindings/reset/airoha,an7583-reset.h   |  65 ++++
 4 files changed, 437 insertions(+), 8 deletions(-)
 create mode 100644 include/dt-bindings/reset/airoha,an7583-reset.h

-- 
2.55.0

[PATCH v11 1/5] dt-bindings: clock: airoha: Document support for AN7583 clock

[Christian Marangi]

Document support for Airoha AN7583 clock. This is based on the EN7523
clock schema with the new requirement of the "airoha,chip-scu".

The register for clock and reset for normal system and PCIe are scattered
between the "SCU" and "chip SCU" registers (they are 2 different register
block, the name is taken from the programming guide)

- Chip SCU provide register access to some clk gate and clk rate
- SCU provide register for reset, PCIe clock, other clock gate and PHY
  SERDES.

Upcoming and current airoha clock driver all follow this pattern of
declaring one of the 2 register and use a sysconf for the other as the 2
register block are tighlty coupled.

EN7581 internally handle the syscon with a direct reference by the use of
syscon_regmap_lookup_by_compatible while AN7583 wants to make this
explicit in DT with the new "airoha,chip-scu" phandle.

Similar to EN7581, also AN7583 permit the selection of the serdes line.

Add additional binding for additional clock and reset lines.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../bindings/clock/airoha,en7523-scu.yaml     | 25 +++++++
 include/dt-bindings/clock/en7523-clk.h        |  3 +
 .../dt-bindings/reset/airoha,an7583-reset.h   | 65 +++++++++++++++++++
 3 files changed, 93 insertions(+)
 create mode 100644 include/dt-bindings/reset/airoha,an7583-reset.h

diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
index fc37786ac7ed..05cd20ce3ab9 100644
--- a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -31,6 +31,7 @@ properties:
   compatible:
     items:
       - enum:
+          - airoha,an7583-scu
           - airoha,en7523-scu
           - airoha,en7581-scu
           - econet,en751221-scu
@@ -57,12 +58,36 @@ properties:
       available serdes port.
     const: 1
 
+  airoha,chip-scu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the Chip SCU providing the registers required
+      for configuring the PCIe related clocks and resets.
+
 required:
   - compatible
   - reg
   - '#clock-cells'
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          const: airoha,an7583-scu
+
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+      required:
+        - airoha,chip-scu
+        - '#reset-cells'
+        - '#phy-cells'
+
+    else:
+      properties:
+        airoha,chip-scu: false
+
   - if:
       properties:
         compatible:
diff --git a/include/dt-bindings/clock/en7523-clk.h b/include/dt-bindings/clock/en7523-clk.h
index edfa64045f52..0fbbcb7b1b25 100644
--- a/include/dt-bindings/clock/en7523-clk.h
+++ b/include/dt-bindings/clock/en7523-clk.h
@@ -14,4 +14,7 @@
 
 #define EN7581_CLK_EMMC		8
 
+#define AN7583_CLK_MDIO0	9
+#define AN7583_CLK_MDIO1	10
+
 #endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
diff --git a/include/dt-bindings/reset/airoha,an7583-reset.h b/include/dt-bindings/reset/airoha,an7583-reset.h
new file mode 100644
index 000000000000..433a5c6180bf
--- /dev/null
+++ b/include/dt-bindings/reset/airoha,an7583-reset.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024 AIROHA Inc
+ * Author: Christian Marangi <ansuelsmth@gmail.com>
+ */
+
+#ifndef __DT_BINDINGS_RESET_CONTROLLER_AIROHA_AN7583_H_
+#define __DT_BINDINGS_RESET_CONTROLLER_AIROHA_AN7583_H_
+
+/* RST_CTRL2 */
+#define AN7583_XPON_PHY_RST		 0
+#define AN7583_GPON_OLT_RST		 1
+#define AN7583_CPU_TIMER2_RST		 2
+#define AN7583_HSUART_RST		 3
+#define AN7583_UART4_RST		 4
+#define AN7583_UART5_RST		 5
+#define AN7583_I2C2_RST			 6
+#define AN7583_XSI_MAC_RST		 7
+#define AN7583_XSI_PHY_RST		 8
+#define AN7583_NPU_RST			 9
+#define AN7583_TRNG_MSTART_RST		10
+#define AN7583_DUAL_HSI0_RST		11
+#define AN7583_DUAL_HSI1_RST		12
+#define AN7583_DUAL_HSI0_MAC_RST	13
+#define AN7583_DUAL_HSI1_MAC_RST	14
+#define AN7583_XPON_XFI_RST		15
+#define AN7583_WDMA_RST			16
+#define AN7583_WOE0_RST			17
+#define AN7583_HSDMA_RST		18
+#define AN7583_TDMA_RST			19
+#define AN7583_EMMC_RST			20
+#define AN7583_SOE_RST			21
+#define AN7583_XFP_MAC_RST		22
+#define AN7583_MDIO0_RST		23
+#define AN7583_MDIO1_RST		24
+/* RST_CTRL1 */
+#define AN7583_PCM1_ZSI_ISI_RST		25
+#define AN7583_FE_PDMA_RST		26
+#define AN7583_FE_QDMA_RST		27
+#define AN7583_PCM_SPIWP_RST		28
+#define AN7583_CRYPTO_RST		29
+#define AN7583_TIMER_RST		30
+#define AN7583_PCM1_RST			31
+#define AN7583_UART_RST			32
+#define AN7583_GPIO_RST			33
+#define AN7583_GDMA_RST			34
+#define AN7583_I2C_MASTER_RST		35
+#define AN7583_PCM2_ZSI_ISI_RST		36
+#define AN7583_SFC_RST			37
+#define AN7583_UART2_RST		38
+#define AN7583_GDMP_RST			39
+#define AN7583_FE_RST			40
+#define AN7583_USB_HOST_P0_RST		41
+#define AN7583_GSW_RST			42
+#define AN7583_SFC2_PCM_RST		43
+#define AN7583_PCIE0_RST		44
+#define AN7583_PCIE1_RST		45
+#define AN7583_CPU_TIMER_RST		46
+#define AN7583_PCIE_HB_RST		47
+#define AN7583_XPON_MAC_RST		48
+/* RST_PCIC */
+#define AN7583_PCIC_PERSTOUT0_RST	49
+#define AN7583_PCIC_PERSTOUT1_RST	50
+
+#endif /* __DT_BINDINGS_RESET_CONTROLLER_AIROHA_AN7583_H_ */
-- 
2.55.0

[PATCH v11 2/5] clk: en7523: use devm variant for clk_hw_register and fixed clock

[Christian Marangi]

Use devm variant for clk_hw_register and clk_hw_register_fixed_rate
to correctly unregister the clocks on probe fails.

This should never happen under normal condition but it's better to
handle these cleanup.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/clk/clk-en7523.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
index 24fdec2e6198..2baec734df9f 100644
--- a/drivers/clk/clk-en7523.c
+++ b/drivers/clk/clk-en7523.c
@@ -651,7 +651,7 @@ static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
 	if (init.ops->unprepare)
 		init.ops->unprepare(&cg->hw);
 
-	if (clk_hw_register(dev, &cg->hw))
+	if (devm_clk_hw_register(dev, &cg->hw))
 		return NULL;
 
 	return &cg->hw;
@@ -708,7 +708,7 @@ static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_dat
 		val = readl(base + reg);
 		rate /= en7523_get_div(desc, val);
 
-		hw = clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
+		hw = devm_clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
 		if (IS_ERR(hw)) {
 			pr_err("Failed to register clk %s: %ld\n",
 			       desc->name, PTR_ERR(hw));
@@ -770,7 +770,7 @@ static void en7581_register_clocks(struct device *dev, struct clk_hw_onecell_dat
 		}
 		rate /= en7523_get_div(desc, val);
 
-		hw = clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
+		hw = devm_clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
 		if (IS_ERR(hw)) {
 			pr_err("Failed to register clk %s: %ld\n",
 			       desc->name, PTR_ERR(hw));
@@ -1105,7 +1105,7 @@ static void en751221_try_register_clk(struct device *dev, int key,
 	if (WARN_ON_ONCE(key >= EN751221_MAX_CLKS))
 		return;
 
-	hw = clk_hw_register_fixed_rate(dev, name, NULL, 0, rate);
+	hw = devm_clk_hw_register_fixed_rate(dev, name, NULL, 0, rate);
 	if (IS_ERR(hw))
 		pr_err("Failed to register clk %s: %pe\n", name, hw);
 	else
-- 
2.55.0

[PATCH v11 3/5] clk: en7523: protect concurrent access to reset and PCI register

[Christian Marangi]

Use spinlock for concurrent access to reset and PCI register to catch case
when clock is enabled/disabled while a reset is also operated at the same
time.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/clk/clk-en7523.c | 86 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 84 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
index 2baec734df9f..e534a5c91e61 100644
--- a/drivers/clk/clk-en7523.c
+++ b/drivers/clk/clk-en7523.c
@@ -577,44 +577,87 @@ static u32 en7523_get_div(const struct en_clk_desc *desc, u32 val)
 static int en7523_pci_is_enabled(struct clk_hw *hw)
 {
 	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	struct device *dev = clk_hw_get_dev(hw);
+	struct en_clk_priv *priv;
+	unsigned long flags;
+	u32 val;
 
-	return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
+	priv = dev_get_drvdata(dev);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	val = readl(cg->base + REG_PCI_CONTROL);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return !!(val & REG_PCI_CONTROL_REFCLK_EN1);
 }
 
 static int en7523_pci_prepare(struct clk_hw *hw)
 {
 	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	struct device *dev = clk_hw_get_dev(hw);
 	void __iomem *np_base = cg->base;
+	struct en_clk_priv *priv;
+	unsigned long flags;
 	u32 val, mask;
 
+	priv = dev_get_drvdata(dev);
+
 	/* Need to pull device low before reset */
+	spin_lock_irqsave(&priv->lock, flags);
 	val = readl(np_base + REG_PCI_CONTROL);
 	val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
 	writel(val, np_base + REG_PCI_CONTROL);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	usleep_range(1000, 2000);
 
 	/* Enable PCIe port 1 */
+	spin_lock_irqsave(&priv->lock, flags);
+	val = readl(np_base + REG_PCI_CONTROL);
 	val |= REG_PCI_CONTROL_REFCLK_EN1;
 	writel(val, np_base + REG_PCI_CONTROL);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	usleep_range(1000, 2000);
 
 	/* Reset to default */
+	spin_lock_irqsave(&priv->lock, flags);
 	val = readl(np_base + REG_RESET_CONTROL1);
 	mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
 	       REG_RESET_CONTROL_PCIEHB;
 	writel(val & ~mask, np_base + REG_RESET_CONTROL1);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	usleep_range(1000, 2000);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	val = readl(np_base + REG_RESET_CONTROL1);
 	writel(val | mask, np_base + REG_RESET_CONTROL1);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	msleep(100);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	val = readl(np_base + REG_RESET_CONTROL1);
 	writel(val & ~mask, np_base + REG_RESET_CONTROL1);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	usleep_range(5000, 10000);
 
 	/* Release device */
-	mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
+	spin_lock_irqsave(&priv->lock, flags);
 	val = readl(np_base + REG_PCI_CONTROL);
+	mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
 	writel(val & ~mask, np_base + REG_PCI_CONTROL);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	usleep_range(1000, 2000);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	val = readl(np_base + REG_PCI_CONTROL);
 	writel(val | mask, np_base + REG_PCI_CONTROL);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	msleep(250);
 
 	return 0;
@@ -623,12 +666,19 @@ static int en7523_pci_prepare(struct clk_hw *hw)
 static void en7523_pci_unprepare(struct clk_hw *hw)
 {
 	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	struct device *dev = clk_hw_get_dev(hw);
 	void __iomem *np_base = cg->base;
+	struct en_clk_priv *priv;
+	unsigned long flags;
 	u32 val;
 
+	priv = dev_get_drvdata(dev);
+
+	spin_lock_irqsave(&priv->lock, flags);
 	val = readl(np_base + REG_PCI_CONTROL);
 	val &= ~REG_PCI_CONTROL_REFCLK_EN1;
 	writel(val, np_base + REG_PCI_CONTROL);
+	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
@@ -660,22 +710,37 @@ static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
 static int en7581_pci_is_enabled(struct clk_hw *hw)
 {
 	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	struct device *dev = clk_hw_get_dev(hw);
+	struct en_clk_priv *priv;
+	unsigned long flags;
 	u32 val, mask;
 
+	priv = dev_get_drvdata(dev);
 	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1;
+
+	spin_lock_irqsave(&priv->lock, flags);
 	val = readl(cg->base + REG_PCI_CONTROL);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	return (val & mask) == mask;
 }
 
 static int en7581_pci_enable(struct clk_hw *hw)
 {
 	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	struct device *dev = clk_hw_get_dev(hw);
 	void __iomem *np_base = cg->base;
+	struct en_clk_priv *priv;
+	unsigned long flags;
 	u32 val, mask;
 
+	priv = dev_get_drvdata(dev);
 	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1;
+
+	spin_lock_irqsave(&priv->lock, flags);
 	val = readl(np_base + REG_PCI_CONTROL);
 	writel(val | mask, np_base + REG_PCI_CONTROL);
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
@@ -683,12 +748,20 @@ static int en7581_pci_enable(struct clk_hw *hw)
 static void en7581_pci_disable(struct clk_hw *hw)
 {
 	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	struct device *dev = clk_hw_get_dev(hw);
 	void __iomem *np_base = cg->base;
+	struct en_clk_priv *priv;
+	unsigned long flags;
 	u32 val, mask;
 
+	priv = dev_get_drvdata(dev);
 	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1;
+
+	spin_lock_irqsave(&priv->lock, flags);
 	val = readl(np_base + REG_PCI_CONTROL);
 	writel(val & ~mask, np_base + REG_PCI_CONTROL);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	usleep_range(1000, 2000);
 }
 
@@ -788,21 +861,25 @@ static int en7523_reset_update(struct reset_controller_dev *rcdev,
 			       unsigned long id, bool assert)
 {
 	struct en_rst_data *rst_data = container_of(rcdev, struct en_rst_data, rcdev);
+	struct en_clk_priv *priv = dev_get_drvdata(rcdev->dev);
 	u32 offset = rst_data->bank_ofs[id / RST_NR_PER_BANK];
 	void __iomem *addr = rst_data->base + offset;
 	bool inverted = false;
+	unsigned long flags;
 	u32 val;
 
 	/* For PCIC reset logic is inverted, 0:assert 1:deassert */
 	if (offset == REG_NP_SCU_PCIC)
 		inverted = true;
 
+	spin_lock_irqsave(&priv->lock, flags);
 	val = readl(addr);
 	if (assert ^ inverted)
 		val |= BIT(id % RST_NR_PER_BANK);
 	else
 		val &= ~BIT(id % RST_NR_PER_BANK);
 	writel(val, addr);
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
@@ -823,16 +900,21 @@ static int en7523_reset_status(struct reset_controller_dev *rcdev,
 			       unsigned long id)
 {
 	struct en_rst_data *rst_data = container_of(rcdev, struct en_rst_data, rcdev);
+	struct en_clk_priv *priv = dev_get_drvdata(rcdev->dev);
 	u32 offset = rst_data->bank_ofs[id / RST_NR_PER_BANK];
 	void __iomem *addr = rst_data->base + offset;
 	bool inverted = false;
+	unsigned long flags;
 	u32 val;
 
 	/* For PCIC reset logic is inverted, 0:assert 1:deassert */
 	if (offset == REG_NP_SCU_PCIC)
 		inverted = true;
 
+	spin_lock_irqsave(&priv->lock, flags);
 	val = readl(addr) & BIT(id % RST_NR_PER_BANK);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	return inverted ? !val : !!val;
 }
 
-- 
2.55.0

[PATCH v11 4/5] clk: en7523: generalize register clocks function

[Christian Marangi]

Airoha AN7583 SoC will use the same logic used by Airoha EN7581 SoC to
register clocks. Generalize it to register clocks defined in soc_data.

Add the clocks definition in EN7581 SoC to support this new implementation.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/clk/clk-en7523.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
index e534a5c91e61..8e24eef651a1 100644
--- a/drivers/clk/clk-en7523.c
+++ b/drivers/clk/clk-en7523.c
@@ -147,6 +147,7 @@ struct en_clk_priv {
 
 struct en_clk_soc_data {
 	u32 num_clocks;
+	const struct en_clk_desc *base_clks;
 	const struct clk_ops pcie_ops;
 	int (*hw_init)(struct platform_device *pdev,
 		       struct clk_hw_onecell_data *clk_data);
@@ -818,12 +819,15 @@ static int en7523_clk_hw_init(struct platform_device *pdev,
 static void en7581_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
 				   struct regmap *map, void __iomem *base)
 {
+	const struct en_clk_soc_data *soc_data;
 	struct clk_hw *hw;
 	u32 rate;
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(en7581_base_clks); i++) {
-		const struct en_clk_desc *desc = &en7581_base_clks[i];
+	soc_data = device_get_match_data(dev);
+
+	for (i = 0; i < soc_data->num_clocks - 1; i++) {
+		const struct en_clk_desc *desc = &soc_data->base_clks[i];
 		u32 val, reg = desc->div_reg ? desc->div_reg : desc->base_reg;
 		int err;
 
@@ -1308,6 +1312,7 @@ static const struct en_clk_soc_data en7523_data = {
 };
 
 static const struct en_clk_soc_data en7581_data = {
+	.base_clks = en7581_base_clks,
 	/* We increment num_clocks by 1 to account for additional PCIe clock */
 	.num_clocks = ARRAY_SIZE(en7581_base_clks) + 1,
 	.pcie_ops = {
-- 
2.55.0

[PATCH v11 5/5] clk: en7523: add support for Airoha AN7583 clock

[Christian Marangi]

Add support for Airoha AN7583 clock and reset.

Airoha AN7583 SoC have the same register address of EN7581 but implement
different bits and additional base clocks. Also reset are different with
the introduction of 2 dedicated MDIO line and drop of some reset lines.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/clk/clk-en7523.c | 249 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 249 insertions(+)

diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
index 8e24eef651a1..821a5f5ad4d8 100644
--- a/drivers/clk/clk-en7523.c
+++ b/drivers/clk/clk-en7523.c
@@ -13,6 +13,7 @@
 #include <linux/reset-controller.h>
 #include <linux/spinlock.h>
 #include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/reset/airoha,an7583-reset.h>
 #include <dt-bindings/reset/airoha,en7523-reset.h>
 #include <dt-bindings/reset/airoha,en7581-reset.h>
 #include <dt-bindings/clock/econet,en751221-scu.h>
@@ -166,6 +167,14 @@ static const u32 crypto_base[] = { 540000000, 480000000 };
 static const u32 emmc7581_base[] = { 200000000, 150000000 };
 /* EN751221 */
 static const u32 gsw751221_base[] = { 500000000, 250000000, 400000000, 200000000 };
+/* AN7583 */
+static const u32 gsw7583_base[] = { 540672000, 270336000, 400000000, 200000000 };
+static const u32 emi7583_base[] = { 540672000, 480000000, 400000000, 300000000 };
+static const u32 bus7583_base[] = { 600000000, 540672000, 480000000, 400000000 };
+static const u32 spi7583_base[] = { 400000000, 12500000 };
+static const u32 npu7583_base[] = { 666000000, 800000000, 720000000, 600000000 };
+static const u32 crypto7583_base[] = { 540672000, 400000000 };
+static const u32 emmc7583_base[] = { 150000000, 200000000 };
 
 static const struct en_clk_desc en7523_base_clks[] = {
 	{
@@ -368,6 +377,138 @@ static const struct en_clk_desc en7581_base_clks[] = {
 	}
 };
 
+static const struct en_clk_desc an7583_base_clks[] = {
+	{
+		.id = EN7523_CLK_GSW,
+		.name = "gsw",
+
+		.base_reg = REG_GSW_CLK_DIV_SEL,
+		.base_bits = 2,
+		.base_shift = 8,
+		.base_values = gsw7583_base,
+		.n_base_values = ARRAY_SIZE(gsw7583_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+		.div_offset = 1,
+	}, {
+		.id = EN7523_CLK_EMI,
+		.name = "emi",
+
+		.base_reg = REG_EMI_CLK_DIV_SEL,
+		.base_bits = 2,
+		.base_shift = 8,
+		.base_values = emi7583_base,
+		.n_base_values = ARRAY_SIZE(emi7583_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+		.div_offset = 1,
+	}, {
+		.id = EN7523_CLK_BUS,
+		.name = "bus",
+
+		.base_reg = REG_BUS_CLK_DIV_SEL,
+		.base_bits = 2,
+		.base_shift = 8,
+		.base_values = bus7583_base,
+		.n_base_values = ARRAY_SIZE(bus7583_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+		.div_offset = 1,
+	}, {
+		.id = EN7523_CLK_SLIC,
+		.name = "slic",
+
+		.base_reg = REG_SPI_CLK_FREQ_SEL,
+		.base_bits = 1,
+		.base_shift = 1,
+		.base_values = slic_base,
+		.n_base_values = ARRAY_SIZE(slic_base),
+
+		.div_reg = REG_SPI_CLK_DIV_SEL,
+		.div_bits = 5,
+		.div_shift = 24,
+		.div_val0 = 20,
+		.div_step = 2,
+	}, {
+		.id = EN7523_CLK_SPI,
+		.name = "spi",
+
+		.base_reg = REG_SPI_CLK_FREQ_SEL,
+		.base_bits = 1,
+		.base_shift = 0,
+		.base_values = spi7583_base,
+		.n_base_values = ARRAY_SIZE(spi7583_base),
+
+		.div_reg = REG_SPI_CLK_DIV_SEL,
+		.div_bits = 5,
+		.div_shift = 8,
+		.div_val0 = 40,
+		.div_step = 2,
+	}, {
+		.id = EN7523_CLK_NPU,
+		.name = "npu",
+
+		.base_reg = REG_NPU_CLK_DIV_SEL,
+		.base_bits = 2,
+		.base_shift = 9,
+		.base_values = npu7583_base,
+		.n_base_values = ARRAY_SIZE(npu7583_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+		.div_offset = 1,
+	}, {
+		.id = EN7523_CLK_CRYPTO,
+		.name = "crypto",
+
+		.base_reg = REG_CRYPTO_CLKSRC2,
+		.base_bits = 1,
+		.base_shift = 0,
+		.base_values = crypto7583_base,
+		.n_base_values = ARRAY_SIZE(crypto7583_base),
+	}, {
+		.id = EN7581_CLK_EMMC,
+		.name = "emmc",
+
+		.base_reg = REG_CRYPTO_CLKSRC2,
+		.base_bits = 1,
+		.base_shift = 13,
+		.base_values = emmc7583_base,
+		.n_base_values = ARRAY_SIZE(emmc7583_base),
+	}, {
+		.id = AN7583_CLK_MDIO0,
+		.name = "mdio0",
+
+		.base_reg = REG_CRYPTO_CLKSRC2,
+
+		.base_value = 25000000,
+
+		.div_bits = 4,
+		.div_shift = 15,
+		.div_step = 1,
+		.div_offset = 1,
+	}, {
+		.id = AN7583_CLK_MDIO1,
+		.name = "mdio1",
+
+		.base_reg = REG_CRYPTO_CLKSRC2,
+
+		.base_value = 25000000,
+
+		.div_bits = 4,
+		.div_shift = 19,
+		.div_step = 1,
+		.div_offset = 1,
+	}
+};
+
 static const u16 en7581_rst_ofs[] = {
 	REG_RST_CTRL2,
 	REG_RST_CTRL1,
@@ -543,6 +684,64 @@ static const u16 en751221_rst_map[] = {
 	[EN751221_USB_PHY_P1_RST]	= 3 * RST_NR_PER_BANK + 7,
 };
 
+static const u16 an7583_rst_map[] = {
+	/* RST_CTRL2 */
+	[AN7583_XPON_PHY_RST]		= 0,
+	[AN7583_GPON_OLT_RST]		= 1,
+	[AN7583_CPU_TIMER2_RST]		= 2,
+	[AN7583_HSUART_RST]		= 3,
+	[AN7583_UART4_RST]		= 4,
+	[AN7583_UART5_RST]		= 5,
+	[AN7583_I2C2_RST]		= 6,
+	[AN7583_XSI_MAC_RST]		= 7,
+	[AN7583_XSI_PHY_RST]		= 8,
+	[AN7583_NPU_RST]		= 9,
+	[AN7583_TRNG_MSTART_RST]	= 12,
+	[AN7583_DUAL_HSI0_RST]		= 13,
+	[AN7583_DUAL_HSI1_RST]		= 14,
+	[AN7583_DUAL_HSI0_MAC_RST]	= 16,
+	[AN7583_DUAL_HSI1_MAC_RST]	= 17,
+	[AN7583_XPON_XFI_RST]		= 18,
+	[AN7583_WDMA_RST]		= 19,
+	[AN7583_WOE0_RST]		= 20,
+	[AN7583_HSDMA_RST]		= 22,
+	[AN7583_TDMA_RST]		= 24,
+	[AN7583_EMMC_RST]		= 25,
+	[AN7583_SOE_RST]		= 26,
+	[AN7583_XFP_MAC_RST]		= 28,
+	[AN7583_MDIO0_RST]		= 30,
+	[AN7583_MDIO1_RST]		= 31,
+	/* RST_CTRL1 */
+	[AN7583_PCM1_ZSI_ISI_RST]	= RST_NR_PER_BANK + 0,
+	[AN7583_FE_PDMA_RST]		= RST_NR_PER_BANK + 1,
+	[AN7583_FE_QDMA_RST]		= RST_NR_PER_BANK + 2,
+	[AN7583_PCM_SPIWP_RST]		= RST_NR_PER_BANK + 4,
+	[AN7583_CRYPTO_RST]		= RST_NR_PER_BANK + 6,
+	[AN7583_TIMER_RST]		= RST_NR_PER_BANK + 8,
+	[AN7583_PCM1_RST]		= RST_NR_PER_BANK + 11,
+	[AN7583_UART_RST]		= RST_NR_PER_BANK + 12,
+	[AN7583_GPIO_RST]		= RST_NR_PER_BANK + 13,
+	[AN7583_GDMA_RST]		= RST_NR_PER_BANK + 14,
+	[AN7583_I2C_MASTER_RST]		= RST_NR_PER_BANK + 16,
+	[AN7583_PCM2_ZSI_ISI_RST]	= RST_NR_PER_BANK + 17,
+	[AN7583_SFC_RST]		= RST_NR_PER_BANK + 18,
+	[AN7583_UART2_RST]		= RST_NR_PER_BANK + 19,
+	[AN7583_GDMP_RST]		= RST_NR_PER_BANK + 20,
+	[AN7583_FE_RST]			= RST_NR_PER_BANK + 21,
+	[AN7583_USB_HOST_P0_RST]	= RST_NR_PER_BANK + 22,
+	[AN7583_GSW_RST]		= RST_NR_PER_BANK + 23,
+	[AN7583_SFC2_PCM_RST]		= RST_NR_PER_BANK + 25,
+	[AN7583_PCIE0_RST]		= RST_NR_PER_BANK + 26,
+	[AN7583_PCIE1_RST]		= RST_NR_PER_BANK + 27,
+	[AN7583_CPU_TIMER_RST]		= RST_NR_PER_BANK + 28,
+	[AN7583_PCIE_HB_RST]		= RST_NR_PER_BANK + 29,
+	[AN7583_XPON_MAC_RST]		= RST_NR_PER_BANK + 31,
+
+	/* RST_PCIC */
+	[AN7583_PCIC_PERSTOUT0_RST]	= 2 * RST_NR_PER_BANK + 29,
+	[AN7583_PCIC_PERSTOUT1_RST]	= 2 * RST_NR_PER_BANK + 26,
+};
+
 static int en7581_reset_register(struct device *dev, void __iomem *base,
 				 const u16 *rst_map, int nr_resets,
 				 const u16 *rst_reg_ofs);
@@ -1170,6 +1369,43 @@ static int en7581_clk_hw_init(struct platform_device *pdev,
 	return en7581_serdes_phy_register(&pdev->dev);
 }
 
+static int an7583_clk_hw_init(struct platform_device *pdev,
+			      struct clk_hw_onecell_data *clk_data)
+{
+	struct en_clk_priv *priv = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	struct regmap *map;
+	void __iomem *base;
+	u32 val;
+	int ret;
+
+	map = syscon_regmap_lookup_by_phandle(dev->of_node, "airoha,chip-scu");
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->base = base;
+
+	en7581_register_clocks(dev, clk_data, map, base);
+
+	val = readl(base + REG_RST_CTRL1);
+	val |= REG_PCIE_HB_RST;
+	writel(val, base + REG_RST_CTRL1);
+	val &= ~REG_PCIE_HB_RST;
+	writel(val, base + REG_RST_CTRL1);
+
+	ret = en7581_reset_register(dev, base, an7583_rst_map,
+				    ARRAY_SIZE(an7583_rst_map),
+				    en7581_rst_ofs);
+	if (ret)
+		return ret;
+
+	return en7581_serdes_phy_register(dev);
+}
+
 static enum en_hir get_hw_id(void __iomem *np_base)
 {
 	u32 val = FIELD_GET(REG_HIR_MASK, readl(np_base + REG_HIR));
@@ -1323,6 +1559,18 @@ static const struct en_clk_soc_data en7581_data = {
 	.hw_init = en7581_clk_hw_init,
 };
 
+static const struct en_clk_soc_data an7583_data = {
+	.base_clks = an7583_base_clks,
+	/* We increment num_clocks by 1 to account for additional PCIe clock */
+	.num_clocks = ARRAY_SIZE(an7583_base_clks) + 1,
+	.pcie_ops = {
+		.is_enabled = en7581_pci_is_enabled,
+		.prepare = en7581_pci_enable,
+		.unprepare = en7581_pci_disable,
+	},
+	.hw_init = an7583_clk_hw_init,
+};
+
 static const struct en_clk_soc_data en751221_data = {
 	.num_clocks = EN751221_MAX_CLKS,
 	.pcie_ops = {
@@ -1336,6 +1584,7 @@ static const struct en_clk_soc_data en751221_data = {
 static const struct of_device_id of_match_clk_en7523[] = {
 	{ .compatible = "airoha,en7523-scu", .data = &en7523_data },
 	{ .compatible = "airoha,en7581-scu", .data = &en7581_data },
+	{ .compatible = "airoha,an7583-scu", .data = &an7583_data },
 	{ .compatible = "econet,en751221-scu", .data = &en751221_data },
 	{ /* sentinel */ }
 };
-- 
2.55.0

Re: [PATCH v11 3/5] clk: en7523: protect concurrent access to reset and PCI register

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [High] clk: en7523: NULL dereference in clk_hw_get_dev() before
  registration
--

commit 9029e0297a2815d965ae1a27ae544f0b9a67fb5f
Author: Christian Marangi <ansuelsmth@gmail.com>

clk: en7523: protect concurrent access to reset and PCI register

This commit adds spinlock protection around PCI control and reset register
accesses in the EN7523 clock and reset callbacks.

> diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> index 2baec734df9fe..e534a5c91e618 100644
> --- a/drivers/clk/clk-en7523.c
> +++ b/drivers/clk/clk-en7523.c
[ ... ]
> @@ -623,12 +666,19 @@ static int en7523_pci_prepare(struct clk_hw *hw)
>  static void en7523_pci_unprepare(struct clk_hw *hw)
>  {
>  	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +	struct device *dev = clk_hw_get_dev(hw);
>  	void __iomem *np_base = cg->base;
> +	struct en_clk_priv *priv;
> +	unsigned long flags;
>  	u32 val;
>  
> +	priv = dev_get_drvdata(dev);
> +
> +	spin_lock_irqsave(&priv->lock, flags);
>  	val = readl(np_base + REG_PCI_CONTROL);
>  	val &= ~REG_PCI_CONTROL_REFCLK_EN1;
>  	writel(val, np_base + REG_PCI_CONTROL);
> +	spin_unlock_irqrestore(&priv->lock, flags);
>  }
[ ... ]
> @@ -683,12 +748,20 @@ static int en7581_pci_enable(struct clk_hw *hw)
>  static void en7581_pci_disable(struct clk_hw *hw)
>  {
>  	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +	struct device *dev = clk_hw_get_dev(hw);
>  	void __iomem *np_base = cg->base;
> +	struct en_clk_priv *priv;
> +	unsigned long flags;
>  	u32 val, mask;
>  
> +	priv = dev_get_drvdata(dev);
>  	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1;
> +
> +	spin_lock_irqsave(&priv->lock, flags);
>  	val = readl(np_base + REG_PCI_CONTROL);
>  	writel(val & ~mask, np_base + REG_PCI_CONTROL);
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +
>  	usleep_range(1000, 2000);
>  }

[Severity: High]
Does clk_hw_get_dev(hw) dereference a NULL hw->core pointer when
en7523_register_pcie_clk() calls init.ops->unprepare(&cg->hw)?

drivers/clk/clk-en7523.c:en7523_register_pcie_clk() {
	...
	cg->base = np_base;
	cg->hw.init = &init;

	if (init.ops->unprepare)
		init.ops->unprepare(&cg->hw);

	if (devm_clk_hw_register(dev, &cg->hw))
		return NULL;
}

clk_hw_get_dev() returns hw->core->dev, but hw->core is only allocated and
assigned inside devm_clk_hw_register().  Calling init.ops->unprepare()
before registration causes a NULL pointer dereference during probe on SoCs
that set pcie_ops.unprepare to en7523_pci_unprepare() or
en7581_pci_disable().

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261106115852.189098-1-ansuelsmth@gmail.com?part=3

Re: [PATCH v11 1/5] dt-bindings: clock: airoha: Document support for AN7583 clock

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [Low] dt-bindings: clock: airoha: unwieldy per-compatible conditionals
  in airoha,en7523-scu.yaml
- [Low] dt-bindings: clock: airoha: inaccurate description of
  airoha,chip-scu in airoha,en7523-scu.yaml
--

commit 94419d913db80e12747b18f5e97b56dbea634264
Author: Christian Marangi <ansuelsmth@gmail.com>

dt-bindings: clock: airoha: Document support for AN7583 clock

This commit documents Device Tree bindings for the Airoha AN7583 clock and
reset controller in airoha,en7523-scu.yaml, and adds clock and reset ID
definitions for AN7583.

> diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
> index fc37786ac7ed8..05cd20ce3ab91 100644
> --- a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
> +++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml

[ ... ]

> @@ -57,12 +58,36 @@ properties:
>        available serdes port.
>      const: 1
>  
> +  airoha,chip-scu:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: phandle to the Chip SCU providing the registers required
> +      for configuring the PCIe related clocks and resets.

[Severity: Low]
As reported by Brian Masney on v9 [1], is the description of
airoha,chip-scu accurate?  As noted in the commit message, the Chip SCU
provides registers for clock gates, base clock rates, and dividers, whereas
resets and PCIe clocks live in the main SCU register block.

> +
>  required:
>    - compatible
>    - reg
>    - '#clock-cells'
>  
>  allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          const: airoha,an7583-scu
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 1
> +
> +      required:
> +        - airoha,chip-scu
> +        - '#reset-cells'
> +        - '#phy-cells'
> +
> +    else:
> +      properties:
> +        airoha,chip-scu: false

[Severity: Low]
This isn't a bug, but adding airoha,an7583-scu gives every compatible in
this binding its own if-then block under allOf, with differing rules for
reg, #phy-cells, #reset-cells, and airoha,chip-scu.  Would it be cleaner to
split the binding into separate schema documents rather than accumulating
per-compatible conditionals here?

[1] https://lore.kernel.org/r/179383990045.753844.10400171550739497565.b4-review@b4

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261106115852.189098-1-ansuelsmth@gmail.com?part=1

Re: [PATCH v11 5/5] clk: en7523: add support for Airoha AN7583 clock

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [High] clk: en7523: NULL deref in clk_hw_get_dev() before PCIe clk
  registration
- [Medium] clk: en7523: AN7583 MDIO clocks registered as fixed-rate
  clocks
--

commit aa0856354194d69ec115be8f509c3f8848e95a7f
Author: Christian Marangi <ansuelsmth@gmail.com>

clk: en7523: add support for Airoha AN7583 clock

This commit adds clock and reset controller support for the Airoha AN7583
SoC to the en7523 clock driver.

> diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> index 8e24eef651a17..821a5f5ad4d8e 100644
> --- a/drivers/clk/clk-en7523.c
> +++ b/drivers/clk/clk-en7523.c
[ ... ]
> @@ -368,6 +377,138 @@ static const struct en_clk_desc en7581_base_clks[] = {
>  	}
>  };
>  
> +static const struct en_clk_desc an7583_base_clks[] = {
[ ... ]
> +	}, {
> +		.id = AN7583_CLK_MDIO0,
> +		.name = "mdio0",
> +
> +		.base_reg = REG_CRYPTO_CLKSRC2,
> +
> +		.base_value = 25000000,
> +
> +		.div_bits = 4,
> +		.div_shift = 15,
> +		.div_step = 1,
> +		.div_offset = 1,
> +	}, {
> +		.id = AN7583_CLK_MDIO1,
> +		.name = "mdio1",
> +
> +		.base_reg = REG_CRYPTO_CLKSRC2,
> +
> +		.base_value = 25000000,
> +
> +		.div_bits = 4,
> +		.div_shift = 19,
> +		.div_step = 1,
> +		.div_offset = 1,
> +	}
> +};

[Severity: Medium]
Can clk_set_rate() configure the divider for AN7583_CLK_MDIO0 and
AN7583_CLK_MDIO1 when they are registered through en7581_register_clocks()?

en7581_register_clocks() registers every entry in soc_data->base_clks with
devm_clk_hw_register_fixed_rate(), whose clk_fixed_rate_ops has no
.determine_rate or .set_rate callback.  When airoha_mdio_probe() calls
clk_set_rate() to lower the MDIO clock from its 25 MHz default to 2.5 MHz,
the call succeeds without writing the 4-bit divider in REG_CRYPTO_CLKSRC2,
leaving the MDIO bus running at its boot frequency.

[ ... ]
> @@ -1323,6 +1559,18 @@ static const struct en_clk_soc_data en7581_data = {
>  	.hw_init = en7581_clk_hw_init,
>  };
>  
> +static const struct en_clk_soc_data an7583_data = {
> +	.base_clks = an7583_base_clks,
> +	/* We increment num_clocks by 1 to account for additional PCIe clock */
> +	.num_clocks = ARRAY_SIZE(an7583_base_clks) + 1,
> +	.pcie_ops = {
> +		.is_enabled = en7581_pci_is_enabled,
> +		.prepare = en7581_pci_enable,
> +		.unprepare = en7581_pci_disable,
> +	},
> +	.hw_init = an7583_clk_hw_init,
> +};

[Severity: High]
Does assigning en7581_pci_disable to .unprepare cause a NULL pointer
dereference in clk_hw_get_dev() during probe?

an7583_clk_hw_init() -> en7581_register_clocks() ->
en7523_register_pcie_clk() calls init.ops->unprepare(&cg->hw) before
devm_clk_hw_register(dev, &cg->hw) initializes cg->hw.core:

drivers/clk/clk-en7523.c:en7523_register_pcie_clk() {
    ...
	if (init.ops->unprepare)
		init.ops->unprepare(&cg->hw);

	if (devm_clk_hw_register(dev, &cg->hw))
		return NULL;
    ...
}

en7581_pci_disable() calls clk_hw_get_dev(hw), which dereferences
hw->core->dev while hw->core is still NULL.

Also, pcie_ops pairs .is_enabled with .prepare and .unprepare instead of
matching .enable/.disable or .is_prepared, whereas en7581_data wires
en7581_pci_enable and en7581_pci_disable to .enable and .disable.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261106115852.189098-1-ansuelsmth@gmail.com?part=5