[PATCH 0/2] ARM: dts: ti: Clean up OMAP crypto bindings and dt

[PATCH 0/2] ARM: dts: ti: Clean up OMAP crypto bindings and dt

[Bhargav Joshi]

Patch 1 removes redundant "clocks" and "clock-names" properties from the
DRA7 crypto dt nodes.

Patch 2 updates the ti,omap-sham YAML binding to add the missing
"ti,omap3-sham" compatible, deprecates "ti,hwmods" and removes it from
the required properties list.

Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
---
Bhargav Joshi (2):
      ARM: dts: ti: omap: dra7: Remove clocks from crypto nodes
      dt-bindings: crypto: ti,omap-sham: Add OMAP3 compatible and deprecate ti,hwmods

 Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml | 3 ++-
 arch/arm/boot/dts/ti/omap/dra7.dtsi                        | 8 --------
 2 files changed, 2 insertions(+), 9 deletions(-)
---
base-commit: 50d05c7c76c96b90462f24debacca971d2e86713
change-id: 20260911-ti-dra7-omap-sham-fix-388a067572b3

Best regards,
-- 
Bhargav

[PATCH 1/2] ARM: dts: ti: omap: dra7: Remove clocks from crypto nodes

[Bhargav Joshi]

The omap-sham and omap-aes crypto drivers do not use "clocks" and
"clock-names" properties. Clock management is handled by the ti-sysc
interconnect parent wrapper. The dt-bindings for ti,omap-sham and
ti,omap-aes don't define these clock properties. Having them in the
child nodes causes dtbs_check warnings.

Remove the "clocks" and "clock-names" properties from the sham and aes
nodes.

Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
---
 arch/arm/boot/dts/ti/omap/dra7.dtsi | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/boot/dts/ti/omap/dra7.dtsi b/arch/arm/boot/dts/ti/omap/dra7.dtsi
index 711ce4c31bb1..0784c6d9cbe4 100644
--- a/arch/arm/boot/dts/ti/omap/dra7.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7.dtsi
@@ -1012,8 +1012,6 @@ aes1: aes@0 {
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
 				dma-names = "tx", "rx";
-				clocks = <&l3_iclk_div>;
-				clock-names = "fck";
 			};
 		};
 
@@ -1043,8 +1041,6 @@ aes2: aes@0 {
 				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
 				dma-names = "tx", "rx";
-				clocks = <&l3_iclk_div>;
-				clock-names = "fck";
 			};
 		};
 
@@ -1073,8 +1069,6 @@ sham1: sham@0 {
 				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&edma_xbar 119 0>;
 				dma-names = "rx";
-				clocks = <&l3_iclk_div>;
-				clock-names = "fck";
 			};
 		};
 
@@ -1103,8 +1097,6 @@ sham2: sham@0 {
 				interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&edma_xbar 165 0>;
 				dma-names = "rx";
-				clocks = <&l3_iclk_div>;
-				clock-names = "fck";
 			};
 		};
 

-- 
2.55.0

Re: [PATCH 1/2] ARM: dts: ti: omap: dra7: Remove clocks from crypto nodes

[Andreas Kemnade]

On Fri, 11 Sep 2026 03:41:57 +0530
Bhargav Joshi <j.bhargav.u@gmail.com> wrote:

> The omap-sham and omap-aes crypto drivers do not use "clocks" and
> "clock-names" properties. Clock management is handled by the ti-sysc
> interconnect parent wrapper. The dt-bindings for ti,omap-sham and
> ti,omap-aes don't define these clock properties. Having them in the
> child nodes causes dtbs_check warnings.
> 
> Remove the "clocks" and "clock-names" properties from the sham and aes
> nodes.
> 
> Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>

Reviewed-by: Andreas Kemnade <andreas@kemnade.info>

> ---
>  arch/arm/boot/dts/ti/omap/dra7.dtsi | 8 --------
>  1 file changed, 8 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/ti/omap/dra7.dtsi b/arch/arm/boot/dts/ti/omap/dra7.dtsi
> index 711ce4c31bb1..0784c6d9cbe4 100644
> --- a/arch/arm/boot/dts/ti/omap/dra7.dtsi
> +++ b/arch/arm/boot/dts/ti/omap/dra7.dtsi
> @@ -1012,8 +1012,6 @@ aes1: aes@0 {
>  				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>  				dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
>  				dma-names = "tx", "rx";
> -				clocks = <&l3_iclk_div>;
> -				clock-names = "fck";
>  			};
>  		};
>  
> @@ -1043,8 +1041,6 @@ aes2: aes@0 {
>  				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
>  				dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
>  				dma-names = "tx", "rx";
> -				clocks = <&l3_iclk_div>;
> -				clock-names = "fck";
>  			};
>  		};
>  
> @@ -1073,8 +1069,6 @@ sham1: sham@0 {
>  				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
>  				dmas = <&edma_xbar 119 0>;
>  				dma-names = "rx";
> -				clocks = <&l3_iclk_div>;
> -				clock-names = "fck";
>  			};
>  		};
>  
> @@ -1103,8 +1097,6 @@ sham2: sham@0 {
>  				interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
>  				dmas = <&edma_xbar 165 0>;
>  				dma-names = "rx";
> -				clocks = <&l3_iclk_div>;
> -				clock-names = "fck";
>  			};
>  		};
>  
> 

[PATCH 2/2] dt-bindings: crypto: ti,omap-sham: Add OMAP3 compatible and deprecate ti,hwmods

[Bhargav Joshi]

The OMAP SHAM driver supports OMAP3 SoCs, and "ti,omap3-sham" is
actively used in existing dts. However, it was previously missing from
binding. Add "ti,omap3-sham" to the list of valid compatibles.

The legacy "ti,hwmods" property is no longer needed as TI OMAP mirgrated
to "ti-sysc". Mark it as deprecated and remove it from the required
properties.

Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
---
 Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml
index d69b50228009..3ef05890e13a 100644
--- a/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml
+++ b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml
@@ -13,6 +13,7 @@ properties:
   compatible:
     enum:
       - ti,omap2-sham
+      - ti,omap3-sham
       - ti,omap4-sham
       - ti,omap5-sham
 
@@ -32,6 +33,7 @@ properties:
     description: Name of the hwmod associated with the SHAM module
     $ref: /schemas/types.yaml#/definitions/string
     enum: [sham]
+    deprecated: true
 
 dependencies:
   dmas: [dma-names]
@@ -40,7 +42,6 @@ additionalProperties: false
 
 required:
   - compatible
-  - ti,hwmods
   - reg
   - interrupts
 

-- 
2.55.0

Re: [PATCH 2/2] dt-bindings: crypto: ti,omap-sham: Add OMAP3 compatible and deprecate ti,hwmods

[Andreas Kemnade]

On Fri, 11 Sep 2026 03:41:58 +0530
Bhargav Joshi <j.bhargav.u@gmail.com> wrote:

> The OMAP SHAM driver supports OMAP3 SoCs, and "ti,omap3-sham" is
> actively used in existing dts. However, it was previously missing from
> binding. Add "ti,omap3-sham" to the list of valid compatibles.
> 
> The legacy "ti,hwmods" property is no longer needed as TI OMAP mirgrated
> to "ti-sysc". Mark it as deprecated and remove it from the required
> properties.
> 
> Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>

What about also removing ti,hwmods usage while you are deprecating it?

Regards,
Andreas
> ---
>  Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml
> index d69b50228009..3ef05890e13a 100644
> --- a/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml
> +++ b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml
> @@ -13,6 +13,7 @@ properties:
>    compatible:
>      enum:
>        - ti,omap2-sham
> +      - ti,omap3-sham
>        - ti,omap4-sham
>        - ti,omap5-sham
>  
> @@ -32,6 +33,7 @@ properties:
>      description: Name of the hwmod associated with the SHAM module
>      $ref: /schemas/types.yaml#/definitions/string
>      enum: [sham]
> +    deprecated: true
>  
>  dependencies:
>    dmas: [dma-names]
> @@ -40,7 +42,6 @@ additionalProperties: false
>  
>  required:
>    - compatible
> -  - ti,hwmods
>    - reg
>    - interrupts
>  
>